Community discussions

MikroTik App

Search found 424 matches

  • 1
  • 2
by czolo
Tue Jun 22, 2021 7:30 pm
Forum: General
Topic: L2 MTU sizes - STILL confused
Replies: 12
Views: 24753

Re: L2 MTU sizes - STILL confused

@millenium7
May I ask if you could share the spreadsheet, that you have prepared? I will try to help you and draw the MLPPP case.
by czolo
Sun May 30, 2021 12:44 am
Forum: General
Topic: Router mikrotik hexpoe
Replies: 9
Views: 1275

Re: Router mikrotik hexpoe

I'm not sure if we were understood properly. Generally the idea is to get the DC jack from the poe splitter like this:


https://www.sevecu.pl/akcesoria/rozwi-z ... 25w-detail
by czolo
Fri May 28, 2021 7:54 am
Forum: Announcements
Topic: v6.48.3 [stable] is released!
Replies: 111
Views: 69452

Re: v6.48.3 [stable] is released!

...these so-called vulnerabilities are nonsense in comparison to other past and actual problems. (Non-RouterOS related) The issues are not that bad at all, especially the design issues. Have not heard how exploits of implementations issue are progressing ... Fine, but I'm wondering... What will hap...
by czolo
Fri May 28, 2021 7:35 am
Forum: General
Topic: Multiple Public IP from one interface
Replies: 4
Views: 857

Re: Multiple Public IP from one interface

My young padawan ... You need to understand how the network works. If you have a Wan port with L3 addresses on it, you may use: - routing with an additional transfer network (which you do not have now) -bridging - but all the client devices have to be in the same bridge with a Wan port -nat - 1:1 NA...
by czolo
Fri May 28, 2021 7:20 am
Forum: General
Topic: Router mikrotik hexpoe
Replies: 9
Views: 1275

Re: Router mikrotik hexpoe

Some cameras are able to use both: PoE and DC powering. If your model has a DC port and accepts 12v, then you may try to use a simple PoE splitter and pull out the DC power from IT. Probably you will be limited to 100mbs Your PoE port on your MT have to be passive. Please measure the voltage and pol...
by czolo
Sat May 22, 2021 8:11 pm
Forum: General
Topic: New WiFi Vulnerabilities - Frag Attacks
Replies: 19
Views: 6088

Re: New WiFi Vulnerabilities - Frag Attacks

Maybe not everyone has guessed it, but fragattack simply allows for most LAN L2 attacks. Is it really so complicated?, I don't think so.
by czolo
Thu Mar 30, 2017 10:54 am
Forum: RouterBOARD hardware
Topic: MUM Europe 2017: new hardware incoming!
Replies: 86
Views: 30453

Re: MUM Europe 2017: new hardware incoming!

Can you type more info about those 60g stuff?
by czolo
Thu Oct 27, 2016 12:29 am
Forum: Wireless Networking
Topic: How can I solve this hacking issue
Replies: 2
Views: 1830

Re: How can I solve this hacking issue

Read about 802.11w?
by czolo
Thu Oct 27, 2016 12:24 am
Forum: Beginner Basics
Topic: Hotspot Script Help
Replies: 1
Views: 944

Re: Hotspot Script Help

/ip hotspot export
by czolo
Sat Oct 22, 2016 5:16 pm
Forum: General
Topic: Horrible experience with wireless. In need of a fix.
Replies: 10
Views: 2778

Re: Horrible experience with wireless. In need of a fix.

Show us frequency usage and scan from this locations. Maybe it's to noisy and nothing will help you exept very good antennas.
by czolo
Sat Oct 22, 2016 5:11 pm
Forum: General
Topic: Query on mikrotik hotspot [SOLVED]
Replies: 2
Views: 1542

Re: Query on mikrotik hotspot [SOLVED]

OK I will help you, but explain why you want tu use 3 different IP's when you have the same with only one?
by czolo
Sat Oct 22, 2016 4:53 pm
Forum: Beginner Basics
Topic: Mikrotik Mini Pci Card
Replies: 4
Views: 1504

Re: Mikrotik Mini Pci Card

Hi......
which mikrotik Mini PCI card that support 40Mhz Turbo Channel Width on 2GHz Band
Almost all cards with AR5213 and AR5414 chip, it means all cards with A/G-Turbo. Normally non-N chispet cards. Now only R52H from MT offer.
Why you need 40MHz?
by czolo
Tue Oct 18, 2016 4:58 pm
Forum: General
Topic: We will pay for public hotspots in Eastern Europe
Replies: 11
Views: 2532

Re: We will pay for public hotspots in Eastern Europe

Please contact me. Maybe we'll be interested
by czolo
Mon Oct 17, 2016 9:00 pm
Forum: The User Manager
Topic: 2 hotspots and 1 user manager
Replies: 3
Views: 7090

Re: 2 hotspots and 1 user manager

You can use domain in hotspot and radius configuration
by czolo
Tue Oct 11, 2016 9:20 pm
Forum: The User Manager
Topic: Generating hotspot passwords and sending them via sms
Replies: 28
Views: 49052

Re: Generating hotspot passwords and sending them via sms

We have something similiar. We are sending a link in SMS. User click on the link, and a web browser autheticate him into the system. Of course there is possibility to collect phone numbers and use it for operators data retention.
by czolo
Wed Oct 05, 2016 7:54 pm
Forum: Wireless Networking
Topic: CAP upgrade from Capsman??
Replies: 1
Views: 3527

Re: CAP upgrade from Capsman??

You have to choose upgrade policy and than you have to set the directory where proper router-os upgrade package is.
by czolo
Mon Oct 03, 2016 5:06 pm
Forum: General
Topic: Feaure Request: Watchdog to watch multiple IP addresses
Replies: 7
Views: 3178

Re: Feaure Request: Watchdog to watch multiple IP addresses

It's possible to do with script. So maybe it's unnessesary?
by czolo
Tue Sep 27, 2016 7:13 pm
Forum: General
Topic: Mikrotik on-login hotspot radius
Replies: 1
Views: 959

Re: Mikrotik on-login hotspot radius

Describe precisely how you want it to work?
by czolo
Tue Sep 27, 2016 6:59 pm
Forum: General
Topic: BUG: powerpc and wireless package
Replies: 1
Views: 1313

BUG: powerpc and wireless package

Problem with enabling wireless packege. I see old package and can't enabled any wireless.
bug_6.37.jpg
by czolo
Fri Sep 23, 2016 10:47 am
Forum: Beginner Basics
Topic: Mikrotik NAT-ing from one subnet to the other
Replies: 12
Views: 8073

Re: Mikrotik NAT-ing from one subnet to the other

There is no example for that :D You have a router in the middle, so if you have gateways setup on your clients and your server, router should know a destination.
Show us your
/ip dhcp-ser ex
by czolo
Thu Sep 22, 2016 5:00 pm
Forum: Beginner Basics
Topic: Mikrotik NAT-ing from one subnet to the other
Replies: 12
Views: 8073

Re: Mikrotik NAT-ing from one subnet to the other

Routing should done the job. If you setup gateways properly on your PCs and your server, it should work.
by czolo
Thu Sep 22, 2016 4:56 pm
Forum: Wireless Networking
Topic: Redirect hotspot login to new page .
Replies: 4
Views: 4181

Re: Redirect hotspot login to new page .

A little misunderstood: redirection is not auto login If you want to redirect to external server, try this as a login.html: <html> <head><title>HTML redirector</title></head> <body> $(if chap-id) <noscript> <center><b>JavaScript required. Enable JavaScript to continue.</b></center> </noscript> $(end...
by czolo
Wed Sep 21, 2016 6:35 pm
Forum: Wireless Networking
Topic: Redirect hotspot login to new page .
Replies: 4
Views: 4181

Re: Redirect hotspot login to new page .

Post here
/ip dns ex
/ip hot ex
and your login.html
by czolo
Thu Sep 15, 2016 10:08 am
Forum: SwOS
Topic: SwOS v1.17 --> RB260GSP --> blank HTML
Replies: 6
Views: 4047

Re: SwOS v1.17 --> RB260GSP --> blank HTML

Wait: SwOS has tftp/bootp recovery? Why didn't I know this?!
You may not asked about it :) ?
by czolo
Wed Sep 14, 2016 10:32 pm
Forum: SwOS
Topic: SwOS v1.17 --> RB260GSP --> blank HTML
Replies: 6
Views: 4047

Re: SwOS v1.17 --> RB260GSP --> blank HTML

We have tha same situation. Only tftp recovery helped. O course after recovery you have to configure it like a new one... :/
by czolo
Sun Sep 04, 2016 9:44 pm
Forum: Wireless Networking
Topic: Help with Optimizing local WISP
Replies: 14
Views: 3168

Re: Help with Optimizing local WISP

ROTFL
by czolo
Sat Sep 03, 2016 11:34 pm
Forum: Beginner Basics
Topic: Hotspot external login password hashing
Replies: 2
Views: 1666

Re: Hotspot external login password hashing

Use js implementation from mikrotik code.
by czolo
Sat Sep 03, 2016 11:31 pm
Forum: General
Topic: HotSpot simultaneous session limit reached
Replies: 1
Views: 2380

Re: HotSpot simultaneous session limit reached

Give us your
/ip hot ex
by czolo
Thu Sep 01, 2016 10:40 am
Forum: General
Topic: Hotspot + register
Replies: 5
Views: 2187

Re: Hotspot + register

We have done something like this in php. External app server, form for registration, data stored in mysql and radius for authentication. RB hotspot sends data to server (mac, hs gateway, etc). You can use it to generate url after the user is registered
by czolo
Wed Aug 31, 2016 8:05 pm
Forum: SwOS
Topic: VLANs VS Bridges
Replies: 10
Views: 14202

Re: VLANs VS Bridges

Just use master-port feature. In CRS you can configure more than one group of ports.
VLAN1 (Ports 1 thru 12) - master port 1
VLAN2 (Ports 13 thru 24) - master port 13

But remember that you can use also the same CRS like a router.
by czolo
Tue Aug 30, 2016 3:41 pm
Forum: Wireless Networking
Topic: Ubnt vs mikrotik wireless product
Replies: 5
Views: 2948

Re: Ubnt vs mikrotik wireless product

I have been using ubnt but never used mikrotik product for wireless network and want it for a new site installation point to multi point installation and want to know which one is easy to use UBNT is easier, but mikrotik stuff is more powerfull (but only in comparing those two devices) and what is ...
by czolo
Tue Aug 30, 2016 3:35 pm
Forum: SwOS
Topic: VLANs VS Bridges
Replies: 10
Views: 14202

Re: VLANs VS Bridges

Next question: When do you make an exception? When do you use bridges?
I've answered you in the previous post: no switchc-chip, capsman, firewall rules in forwarding traffic, etc.
by czolo
Tue Aug 30, 2016 10:39 am
Forum: SwOS
Topic: VLANs VS Bridges
Replies: 10
Views: 14202

Re: VLANs VS Bridges

Bridges use processor for forwarding traffic. VLAN's can be cofigured with switch-chip,and in this scenario are fester than using bridges. But vlans can be configured also with cpu too (slower througput) For your purpose (usually most cases) using switch-chip is better. Bridges are simple to underst...
by czolo
Tue Aug 30, 2016 9:17 am
Forum: Wireless Networking
Topic: TP-Link WIFI Adapter On PC Mikrotik
Replies: 1
Views: 1269

Re: TP-Link WIFI Adapter On PC Mikrotik

There are two versions of this card. One with chip AR92xx and newer with AR94xx.
I have tested first version, and it's working with MT. V2 should work too.
by czolo
Mon Aug 29, 2016 9:15 pm
Forum: General
Topic: Forward all traffic from one interface to another
Replies: 6
Views: 5794

Re: Forward all traffic from one interface to another

Mark routing to your email server, and add a route with that mark in your routing table.
Easy :)
by czolo
Mon Aug 29, 2016 9:13 pm
Forum: General
Topic: Hotspot + register
Replies: 5
Views: 2187

Re: Hotspot + register

You have to code it, because MT has no feature for user registration. You can always add it manualy.
by czolo
Mon Aug 29, 2016 9:11 pm
Forum: General
Topic: routerboard cap, hotspot and web proxy
Replies: 2
Views: 1117

Re: routerboard cap, hotspot and web proxy

You want to use hotspot without proxy(even transpared)?
Maybe explain what you want to achive by that?
by czolo
Sun Aug 28, 2016 2:05 pm
Forum: Wireless Networking
Topic: Basebox2 + R11e-2HPnD
Replies: 8
Views: 1850

Re: Basebox2 + R11e-2HPnD

It work's as it should. Your home router don't know where is your second network 192.168.55.x, so if it gets packet's from it' it sends it to default gateway. You can src-nat your traffic to 192.168.1.x, or add a route on your first router. Read about networks layers, routing, ip protocol, and after...
by czolo
Sun Aug 28, 2016 1:45 pm
Forum: Wireless Networking
Topic: Virtual AP/Virtual Client + DHCP + 2.4
Replies: 1
Views: 1532

Re: Virtual AP/Virtual Client + DHCP + 2.4

Your virtual-ap (wlan1) isn't in bridge, and have no dhcp-server. You can add it or use dhcp-relay.
by czolo
Fri Aug 26, 2016 12:20 pm
Forum: Wireless Networking
Topic: SXT Lite5 Neighbors
Replies: 3
Views: 1247

Re: SXT Lite5 Neighbors

Why routing have to be disabled? What you mean by saying that? > When I connect one of those stations by Ethernet to my laptop and open WinBox 3.4, I can only see this station and the neighbors don't appear Maybe that's because you have separate broadcast area (L2) on wifi and lan. Use bridge and ad...
by czolo
Fri Aug 26, 2016 12:02 pm
Forum: Wireless Networking
Topic: mpcie 802.11n cards for Routerboard
Replies: 17
Views: 8949

Re: mpcie 802.11n cards for Routerboard

Who cares anymore?
This problem still exists. I have it yestarday with a couple of RB912 with external cards, and find a way to repair that.

Your answer is simply rude..
by czolo
Fri Aug 26, 2016 11:58 am
Forum: Wireless Networking
Topic: Mix Autenthication hotspot
Replies: 4
Views: 1243

Re: Mix Autenthication hotspot

Yes it's possible to, but with some external server with dedicated soft.
Simple version - you can redirect user after login with voucher on page with FB checkin
by czolo
Thu Aug 25, 2016 9:48 pm
Forum: Wireless Networking
Topic: CAPsMAN - How to force layer 2?
Replies: 11
Views: 11404

Re: CAPsMAN - How to force layer 2?

Nice workaround!
thx :)
by czolo
Thu Aug 25, 2016 9:44 pm
Forum: Wireless Networking
Topic: Mix Autenthication hotspot
Replies: 4
Views: 1243

Re: Mix Autenthication hotspot

With differen SSIDs - YES.
by czolo
Thu Aug 25, 2016 5:36 pm
Forum: Wireless Networking
Topic: mpcie 802.11n cards for Routerboard
Replies: 17
Views: 8949

Re: mpcie 802.11n cards for Routerboard

I found a solution for this problem: Card is not recognized properly and device-id is 0xabcd
It looks like the problem is with the boot-time, when the card is initialized.
/system routerboard settings set init-delay=2
After that all is OK.
by czolo
Sun Aug 07, 2016 8:54 pm
Forum: Wireless Networking
Topic: Intruder ? 912 basebox
Replies: 5
Views: 1519

Re: Intruder ? 912 basebox

Maybe think about management protection frame feature.
by czolo
Thu Aug 04, 2016 7:53 pm
Forum: Wireless Networking
Topic: NAT not working
Replies: 19
Views: 5452

Re: NAT not working

Post here
/ip fi fi pr
/ip fi nat pr
by czolo
Wed Aug 03, 2016 10:06 pm
Forum: General
Topic: Hotspot with external Webserver - Too many redirect
Replies: 6
Views: 5069

Re: Hotspot with external Webserver - Too many redirect

Check all external links in your page (that on external srv) and add all url's in walledgarden in your RB with hotspot.
by czolo
Wed Aug 03, 2016 9:12 pm
Forum: Wireless Networking
Topic: Wifi hotspot for me/guests, routers, captive portal
Replies: 7
Views: 2358

Re: Wifi hotspot for me/guests, routers, captive portal

So it may work, but you have to try to be sure
by czolo
Wed Aug 03, 2016 1:05 pm
Forum: Wireless Networking
Topic: Wifi hotspot for me/guests, routers, captive portal
Replies: 7
Views: 2358

Re: Wifi hotspot for me/guests, routers, captive portal

It's impossible to answer
Everything depends on the materials making up the building
by czolo
Wed Aug 03, 2016 12:20 pm
Forum: Wireless Networking
Topic: point to point 160m
Replies: 6
Views: 1994

Re: point to point 160m

Rather sector, from my experience, especially for this distance. SXT has better antenna (panel), but it's not as directional, as it seems
http://i.mt.lv/routerboard/files/sxt-patterns.pdf

But if you have RBwAPG-5HacT2HnD antenna patern, i will see it with pleasure.
by czolo
Tue Aug 02, 2016 11:12 pm
Forum: Wireless Networking
Topic: Hotspot with Vlan Ubiquiti AP doesn't work
Replies: 7
Views: 1898

Re: Hotspot with Vlan Ubiquiti AP doesn't work

What value do you have in
/ip hotspot user profile shared-users
?
by czolo
Tue Aug 02, 2016 11:08 pm
Forum: Wireless Networking
Topic: CAPsMAN - How to force layer 2?
Replies: 11
Views: 11404

Re: CAPsMAN - How to force layer 2?

Yes, but it works :)
by czolo
Tue Aug 02, 2016 10:39 pm
Forum: Wireless Networking
Topic: Help with PTMP Security
Replies: 1
Views: 1149

Re: Help with PTMP Security

On AP:
/interface wireless set default-forwarding=no

in firewall:
/ip firewall filter add chain=forward in-interface=wlan1 out-interface=!your_wan

AFAIK CDP i L2 protocol, so you can't drop it with filters in firewall? Maybe I'm wrong, but only disabling in "/ip nei dis"
by czolo
Tue Aug 02, 2016 10:19 pm
Forum: Wireless Networking
Topic: Hotspot with Vlan Ubiquiti AP doesn't work
Replies: 7
Views: 1898

Re: Hotspot with Vlan Ubiquiti AP doesn't work

OK so if mobile devices can work i assume that your router can reach DNS.
Of course you trying to type in url any non-https address and after that nothing happens?
by czolo
Tue Aug 02, 2016 10:16 pm
Forum: Wireless Networking
Topic: Need Help with complicated scinario
Replies: 1
Views: 817

Re: Need Help with complicated scinario

Just a suggestion, but i feel it can be done with hotspot.
by czolo
Tue Aug 02, 2016 10:14 pm
Forum: Wireless Networking
Topic: EAP-SIM authentication
Replies: 1
Views: 1352

Re: EAP-SIM authentication

Maybe read about passpoint (hotspot 2.0) techonology
by czolo
Tue Aug 02, 2016 10:05 pm
Forum: Wireless Networking
Topic: CAPsMAN - How to force layer 2?
Replies: 11
Views: 11404

Re: CAPsMAN - How to force layer 2?

Maybe try that:
interface wireless cap set caps-man-addresses=127.0.0.1
by czolo
Tue Aug 02, 2016 9:59 pm
Forum: Wireless Networking
Topic: Wireless setup for apartment block suggestion
Replies: 9
Views: 2860

Re: Wireless setup for apartment block suggestion

Powerful radio is not an answer. WiFi works in both directions. To much power with so many AP and walls on the signal path will make a mess. If this are apartments I will sugest to put AP inside the building. Maybe you can use electric cables and create PowerLine network? Maybe there is cooper TV ne...
by czolo
Tue Aug 02, 2016 9:53 pm
Forum: Wireless Networking
Topic: Can't Connect To Config Settings Metal5
Replies: 5
Views: 1403

Re: Can't Connect To Config Settings Metal5

Mayb you can connect to it on L2. Try to use mac-telnet
by czolo
Tue Aug 02, 2016 9:44 pm
Forum: Wireless Networking
Topic: point to point 160m
Replies: 6
Views: 1994

Re: point to point 160m

My suggestion is wAP-ac http://routerboard.com/RBwAPG-5HacT2HnD
AC is better than N
by czolo
Tue Aug 02, 2016 9:42 pm
Forum: Wireless Networking
Topic: Suggestion for ultra-short link
Replies: 9
Views: 1974

Re: Suggestion for ultra-short link

wAP-ac will be excellent for your purpose
by czolo
Tue Aug 02, 2016 9:39 pm
Forum: Wireless Networking
Topic: Hotspot with Vlan Ubiquiti AP doesn't work
Replies: 7
Views: 1898

Re: Hotspot with Vlan Ubiquiti AP doesn't work

Check if your hotspot-router can reach your dns server (8.8.8.8 in your config)?
by czolo
Tue Aug 02, 2016 9:36 pm
Forum: Wireless Networking
Topic: Simple wireless roaming
Replies: 10
Views: 3377

Re: Simple wireless roaming

You can use signal level for disconnection, but without support 802.11 r,k,v in RouterOS you have all that is possible for now.
by czolo
Tue Aug 02, 2016 9:30 pm
Forum: Wireless Networking
Topic: CAPsMAN multiple virtual ssid
Replies: 7
Views: 15989

Re: CAPsMAN multiple virtual ssid

It's easy:
caps-man provisioning set slave-configurations=cfg1,cfg2
by czolo
Sun Jul 31, 2016 11:05 pm
Forum: Wireless Networking
Topic: Background snooping ?
Replies: 1
Views: 838

Background snooping ?

Hi
I have a question to MT developers: can you improve snooping similiar to background wireless scan?
by czolo
Sun Mar 06, 2016 10:35 pm
Forum: General
Topic: Capture all traffic https with webproxy?
Replies: 13
Views: 29872

Re: Capture all traffic https with webproxy?

Yes
Here is example for Firefox web browser:
http://www.wikihow.com/Enter-Proxy-Settings-in-Firefox
by czolo
Sun Mar 06, 2016 9:11 pm
Forum: General
Topic: I cant get more than 50 Mbps through a PtP Netmetal 5 link
Replies: 31
Views: 6059

Re: I cant get more than 50 Mbps through a PtP Netmetal 5 link

Hi, yes, it´s real... why I will false this test? 1434Mbps / 8 bits = About 180 MBytes, tomorrow will test with a Gigabit ethernet port computer and try to make a test with iperf... today make a iperf test but two sides PCs are connected through a wifi router and max speed are 3 Mbytes. The real te...
by czolo
Sun Mar 06, 2016 8:59 pm
Forum: General
Topic: hot spot limit
Replies: 2
Views: 832

Re: hot spot limit

Yes
Use trial mode in hotspot.
by czolo
Sun Mar 06, 2016 1:07 am
Forum: General
Topic: Capture all traffic https with webproxy?
Replies: 13
Views: 29872

Re: Capture all traffic https with webproxy?

Mikrotik can be transparent proxy, but you have to manually configure your web browser to use it. You can't redirect https connection with firewall to any squid or similiar proxy, because https use end to end encryption.
by czolo
Sun Mar 06, 2016 12:55 am
Forum: General
Topic: Mikrotik CRS112 reachablilty issue
Replies: 3
Views: 1158

Re: Mikrotik CRS112 reachablilty issue

Main task for a switch is not responding to pings :D
But let's leave jokes. Without configuration exports we are blind. Especially export from that second CRS
by czolo
Sun Mar 06, 2016 12:50 am
Forum: General
Topic: I cant get more than 50 Mbps through a PtP Netmetal 5 link
Replies: 31
Views: 6059

Re: I cant get more than 50 Mbps through a PtP Netmetal 5 link

Image
Is it real test? Do you really achive on this link more than 1,4Gbps!?!? :shock:
by czolo
Sun Mar 06, 2016 12:36 am
Forum: RouterBOARD hardware
Topic: Need advice to cover 20km wifi
Replies: 20
Views: 3758

Re: Need advice to cover 20km wifi

Sorry, but I can't agree with ShayanFiroozi Any one chain model will be bad idea. Similiary with high power devices, so my advise is to forget about Netmetal. The same with WDS mesh, because of bandwith efficiency. 20km^2 it is not big area for ISP (~4,5 x 4,5km), but you have to explain what is exa...
by czolo
Sun Mar 06, 2016 12:27 am
Forum: General
Topic: Business template Login to Mikrotik Hotspot
Replies: 1
Views: 2343

Re: Business template Login to Mikrotik Hotspot

And what?
by czolo
Sun Mar 06, 2016 12:25 am
Forum: Beginner Basics
Topic: How to redirect HS users with cookies login?
Replies: 1
Views: 846

Re: How to redirect HS users with cookies login?

Yes
Use status page.
by czolo
Thu Mar 03, 2016 3:26 pm
Forum: RouterBOARD hardware
Topic: How to get OpenWrt running on some new Mikrotik devices?
Replies: 7
Views: 7268

Re: How to get OpenWrt running on some new Mikrotik devices?

You are thinking natively, not with meta router?
by czolo
Thu Mar 03, 2016 3:21 pm
Forum: Beginner Basics
Topic: CAPsMAN v2 and VLANS (CAPS creat VLAN?)
Replies: 12
Views: 4133

Re: CAPsMAN v2 and VLANS (CAPS creat VLAN?)

Thanks a lot.

And can you explain why I can't connect if I set vlan-mode=use-tag in the access-list?
If we talk about your current configuration, just because your VLANs aren't on a bridge.
by czolo
Thu Mar 03, 2016 2:06 pm
Forum: Beginner Basics
Topic: CAPsMAN v2 and VLANS (CAPS creat VLAN?)
Replies: 12
Views: 4133

Re: CAPsMAN v2 and VLANS (CAPS creat VLAN?)

Security is the matter of L3, and all that we have done is L2.
So it's secure if you know what you are doing, and after that you can always add firewall rules.
by czolo
Thu Mar 03, 2016 1:04 pm
Forum: Beginner Basics
Topic: CAPsMAN v2 and VLANS (CAPS creat VLAN?)
Replies: 12
Views: 4133

Re: CAPsMAN v2 and VLANS (CAPS creat VLAN?)

OK You are using hAP ac, so it's dual-band router. First hint, use hw-supported-modes in provisioning (an / gn) /caps-man provisioning add action=create-dynamic-enabled identity-regexp="Ring 393" hw-supported-modes=an \ master-configuration="Ring 393" name-format=identity slave-c...
by czolo
Thu Mar 03, 2016 8:20 am
Forum: General
Topic: Hotspot config advise
Replies: 3
Views: 984

Re: Hotspot config advise

We need further information:
What model of RB you have for hs?
How many users is connected when you see the issue?
How many wifi networks is nearby?
What is you Internet speed?

For now you can try to set speed limit in user-profile.
by czolo
Thu Mar 03, 2016 12:16 am
Forum: General
Topic: Hotspot config advise
Replies: 3
Views: 984

Re: Hotspot config advise

Paste here /ip hots ex
by czolo
Wed Mar 02, 2016 10:36 pm
Forum: Wireless Networking
Topic: [SOLVED] CAPSMAN + "Manager Forwarding Mode" + Tagged VLANs (=> use case: EDUROAM)
Replies: 14
Views: 6320

Re: CAPSMAN + "Manager Forwarding Mode" + Tagged VLANs (=> use case: EDUROAM)

I want the traffic of a laptop that connects to the CAP being forwarded by the RouterOS to a tagged VLAN that resides on ethernet2. (The whole setup was running with untagged traffic. But this is not my goal, as I want to use multiple tagged VLANs on ethernet2 later and getting traffic over it) Wit...
by czolo
Wed Mar 02, 2016 7:53 pm
Forum: Beginner Basics
Topic: CAPsMAN v2 and VLANS (CAPS creat VLAN?)
Replies: 12
Views: 4133

Re: CAPsMAN v2 and VLANS (CAPS creat VLAN?)

Ok, so if I understand right
I have to put the VLANs to the bridge and than tag the datapath?
Is that better?
Can you also explain why?
Yes.
First do it, check, report here and than I will try to explain :)
by czolo
Wed Mar 02, 2016 3:28 pm
Forum: Beginner Basics
Topic: CAPsMAN v2 and VLANS (CAPS creat VLAN?)
Replies: 12
Views: 4133

Re: CAPsMAN v2 and VLANS (CAPS creat VLAN?)

Do not add new bridge
You have to create each VLAN in bridge BR_LAN_MGMT. Now you are tagging trafic in Capsman, but you need VLANs to untag it.
by czolo
Wed Mar 02, 2016 12:21 pm
Forum: General
Topic: using external login page for hotspot
Replies: 3
Views: 3579

Re: using external login page for hotspot

Change login.html file. Add your.domain.com do Walled-Garden. <html> <head><title>redirector</title></head> <body> $(if chap-id) <noscript> <center><b>JavaScript required. Enable JavaScript to continue.</b></center> </noscript> $(endif) <form name="redirect" action="http://your.domain...
by czolo
Tue Mar 01, 2016 7:48 pm
Forum: Beginner Basics
Topic: CAPsMAN v2 and VLANS (CAPS creat VLAN?)
Replies: 12
Views: 4133

Re: CAPsMAN v2 and VLANS (CAPS creat VLAN?)

A small patch:
in every line of /caps-man datapath
add bridge=BR_LAN_MGMT name=datapath-WLAN_1_DATA vlan-id=12 vlan-mode=use-tag

And just to be sure:
/caps-man access-list
add action=accept disabled=no mac-address=00:00:00:00:00:00 ssid-regexp="DATA" vlan-id=12 vlan-mode=use-tag
by czolo
Tue Mar 01, 2016 4:33 pm
Forum: Wireless Networking
Topic: Full Duplex PTP over 7 to 14Kms
Replies: 24
Views: 5605

Re: Full Duplex PTP over 7 to 14Kms

Not of the physical equipment, but I can share point A and B
I can share a screenshots of the signal and distance
It is something to be proud
Show us :shock:
by czolo
Tue Mar 01, 2016 2:28 pm
Forum: Wireless Networking
Topic: Change wireless propery on CAP managed by CAPsMAN
Replies: 6
Views: 25759

Re: Change wireless propery on CAP managed by CAPsMAN

Related to this, I would like to be able to specify (enable or disable) specific rates on wireless interfaces managed by CAPsMAN.
Possible with new wir-rep package.
by czolo
Tue Mar 01, 2016 2:25 pm
Forum: Wireless Networking
Topic: Change wireless propery on CAP managed by CAPsMAN
Replies: 6
Views: 25759

Re: Change wireless propery on CAP managed by CAPsMAN

I will generalize my question: How to change some option (property) for CAP wireless interface that isn't supported by CAPsMAN ?
Thanks
It's like an elephant and a refrigerator. You can do it in three steps:
- disable cap
- manualy set proper option
- enable cap mode

:D
by czolo
Tue Mar 01, 2016 2:18 pm
Forum: Wireless Networking
Topic: Full Duplex PTP over 7 to 14Kms
Replies: 24
Views: 5605

Re: Full Duplex PTP over 7 to 14Kms

The longest link we have is about 150km.
Using RBNetmetal 5's and the biggest dishes ubnt makes.
Signal is -57/-55 getting about 40-60Mbps
Respect!
Do you have any photos?
by czolo
Tue Mar 01, 2016 9:43 am
Forum: Wireless Networking
Topic: Hotspot and encryption
Replies: 3
Views: 1256

Re:

Are you sure that the encryption is done in cpu and not in wlan card?
AES - wlan card (hardware accelerated AES encryption is in almost all chips)
TKIP - cpu

But why using any encryption for hotspots?
by czolo
Mon Feb 29, 2016 9:03 pm
Forum: General
Topic: excluded-address in mikrotik
Replies: 5
Views: 3166

Re: excluded-address in mikrotik

i'm using mikrotik router,and I'v dhcp server there, i wanna exclude 10.200.0.10 10.200.0.84 on mikrotik
So you have to mannualy exclude that addresses, using ranges: 100.200.0.1-10.200.0.9; 10.200.0.11-10.200.0.83 and so on.
by czolo
Mon Feb 29, 2016 9:00 pm
Forum: Wireless Networking
Topic: [SOLVED] CAPSMAN + "Manager Forwarding Mode" + Tagged VLANs (=> use case: EDUROAM)
Replies: 14
Views: 6320

Re: CAPSMAN + "Manager Forwarding Mode" + Tagged VLANs (=> use case: EDUROAM)

Ok - next hint:
Creating VLAN on a bridge and adding it to the same bridge is a good way to trouble. So if you want to use that VLAN for untaging traffic from capsman datapath, just don't add it to that bridge again. If you have to untag it to another ether interface, try to use another bridge.
by czolo
Mon Feb 29, 2016 8:54 pm
Forum: General
Topic: RB3011 Cannot Create DHCP Pool larger than /24
Replies: 6
Views: 2351

Re: RB3011 Cannot Create DHCP Pool larger than /24

Make manual config without wizzard.
by czolo
Sun Feb 28, 2016 7:13 pm
Forum: Wireless Networking
Topic: Full Duplex PTP over 7 to 14Kms
Replies: 24
Views: 5605

Re: Full Duplex PTP over 7 to 14Kms

In my opinion: ospf is better.
by czolo
Sun Feb 28, 2016 7:09 pm
Forum: General
Topic: excluded-address in mikrotik
Replies: 5
Views: 3166

Re: excluded-address in mikrotik

Use address-list.
by czolo
Sun Feb 28, 2016 4:04 pm
Forum: RouterBOARD hardware
Topic: Turning off LEDs on RB2011UiAS-RM
Replies: 2
Views: 1823

Re: Turning off LEDs on RB2011UiAS-RM

In your model you can configure only sfp-led.
Lifehack it 8) :
http://www.apartmenttherapy.com/5-ways- ... hts-168086

PS. Greetings for StarTik (see his last MUM prsentation)
by czolo
Sun Feb 28, 2016 3:53 pm
Forum: RouterBOARD hardware
Topic: hAP ac lite information
Replies: 1
Views: 1029

Re: hAP ac lite information

It has two radios, so the ansewer is: no problem, you can.
by czolo
Sun Feb 28, 2016 1:49 pm
Forum: Wireless Networking
Topic: CAPsMAN with multiple SSIDs/VLANs?
Replies: 10
Views: 17322

Re: CAPsMAN with multiple SSIDs/VLANs?

Last question what is SSID-REGEXP and how work it? /caps-man access-list add action=accept disabled=yes signal-range=-100..120 ssid-regexp="" Let's suppose that your master SSID is "My office network" and slave "My private WiFI". Now you can use a part of SSID: "M...
by czolo
Sun Feb 28, 2016 12:03 pm
Forum: General
Topic: RB3011 Cannot Create DHCP Pool larger than /24
Replies: 6
Views: 2351

Re: RB3011 Cannot Create DHCP Pool larger than /24

Are you using the wizard, or configuring it manually?
by czolo
Sat Feb 27, 2016 11:47 am
Forum: General
Topic: Bye bye MIKROTIK...
Replies: 29
Views: 12398

Re: Bye bye MIKROTIK...

You are nervus, because RB3011 is not yet stable?
They will fix it soon
Image
by czolo
Sat Feb 27, 2016 4:14 am
Forum: Wireless Networking
Topic: [SOLVED] CAPSMAN + "Manager Forwarding Mode" + Tagged VLANs (=> use case: EDUROAM)
Replies: 14
Views: 6320

Re: CAPSMAN + "Manager Forwarding Mode" + Tagged VLAN

Hello, thanks, but I actually don´t see the difference what you suggested and what I already tried? :( i.e.: - add a bridge with proxy arp enabled - add a tagged VLAN (ID 743) on the bridge - add the ethernet port to the bridge - add the VLAN-Interface to the bridge That actually doesn´t work for m...
by czolo
Fri Feb 26, 2016 12:38 pm
Forum: Wireless Networking
Topic: [SOLVED] CAPSMAN + "Manager Forwarding Mode" + Tagged VLANs (=> use case: EDUROAM)
Replies: 14
Views: 6320

Re: CAPSMAN + "Manager Forwarding Mode" + Tagged VLAN

/interface bridge add arp=proxy-arp name=bridge-with-vlan-tags protocol-mode=none /interface vlan add interface=bridge-with-vlan-tags name=interfacevlan743bridge vlan-id=743 /interface bridge port add bridge=bridge-with-vlan-tags interface=ether2 add bridge=bridge-with-vlan-tags interface=interface...
by czolo
Thu Feb 25, 2016 8:20 pm
Forum: Wireless Networking
Topic: CapsMAN Dual Band
Replies: 6
Views: 9561

Re: CapsMAN Dual Band

Hi all
Is there someone who can guide me (step by step please ;)) as this i driving me crazy
Give us some code. Export your config and paste it here.
by czolo
Tue Feb 23, 2016 6:43 pm
Forum: SwOS
Topic: Critical bug in SWOS. Autonegotiation state after reboot
Replies: 4
Views: 3393

Re: Critical bug in SWOS. Autonegotiation state after reboot

You nowhere wrote if you have this problem with this latest swos firmware?
Therefore I asked you if you use swos 2.14?
Sorry for my rude reply.
Of course 1.14, but problem is probably in all versions (tested with 1.13)
by czolo
Sun Feb 21, 2016 10:09 am
Forum: The User Manager
Topic: Issue with userman and hotspot
Replies: 1
Views: 1603

Re: Issue with userman and hotspot

Try to use mac-cookie. Check session timeout.
by czolo
Sat Feb 20, 2016 2:33 pm
Forum: SwOS
Topic: Critical bug in SWOS. Autonegotiation state after reboot
Replies: 4
Views: 3393

Critical bug in SWOS. Autonegotiation state after reboot

Hi We have a problem with 260 series switches. If we set auto-negotiation to disable, and choose a speed and duplex manually, it works OK only till next reboot. After reboot all looks OK, but speed is not working and we have errors in L2. Disable/enable button and it works again, of course till next...
by czolo
Fri Feb 19, 2016 8:13 pm
Forum: Wireless Networking
Topic: Maximum number of wireless clients
Replies: 5
Views: 3934

Re: Maximum number of wireless clients

Sorry "Bro", but there is no magic trick for your situation. Enjoy with 15 client's and 20Mb that you have because it's still quite a lot.
You should use nv2 and AMPDU for traffic prioritization, QoS for services and wait for AC fixes in RouterOS
by czolo
Thu Feb 18, 2016 8:44 pm
Forum: Wireless Networking
Topic: Wireless not allowed change setting..
Replies: 1
Views: 1591

Re: Wireless not allowed change setting..

I already solve this issue..
It will be nice if you tell us how you did it.
by czolo
Wed Feb 17, 2016 10:55 pm
Forum: Wireless Networking
Topic: Configuration Groove a-52HPn
Replies: 4
Views: 4724

Re: Configuration Groove a-52HPn

Write more about this building and antenna type that you have there? Maybe some photos?
by czolo
Wed Feb 17, 2016 12:30 pm
Forum: Wireless Networking
Topic: HOTSPOT: not working as it should
Replies: 5
Views: 2673

Re: HOTSPOT: not working as it should

Why do you think that google-dns may cause the problem?
I will recommend to disable remote requests, because it's dangerous. Tip with NTP may be helpful, because in script above I can't find NTP client part.
I see that you have not set DNS for guest network in DHCP. Change that please.
by czolo
Wed Feb 17, 2016 12:24 pm
Forum: RouterBOARD hardware
Topic: mAP Lite not broadcasting wifi
Replies: 6
Views: 3111

Re: mAP Lite not broadcasting wifi

Try to connect with mac-telnet.
by czolo
Wed Feb 17, 2016 12:22 pm
Forum: Wireless Networking
Topic: Wireless not allowed change setting..
Replies: 1
Views: 1591

Re: Wireless not allowed change setting..

Which settings, because now we can only guess?

I will try to be a fairy:
If you try to change tx-power, change tab from "current-tx-power" to "tx-power"
by czolo
Tue Feb 16, 2016 4:37 pm
Forum: RouterBOARD hardware
Topic: mAP Lite not broadcasting wifi
Replies: 6
Views: 3111

Re: mAP Lite not broadcasting wifi

Have you ever try to configure it, or you just try to power it on? :D
by czolo
Tue Feb 16, 2016 10:16 am
Forum: RouterBOARD hardware
Topic: How to reduce txpower on a RB912UAG-5HPnD ?
Replies: 11
Views: 3489

Re: How to reduce txpower on a RB912UAG-5HPnD ?

Excellent explanation, but remember that this applies to inbuilding installations. Outdoor is more complicated. You have asked about txpower per country. This example will help you: /interface wireless info> country-info slovenia ranges: 2402-2482/b,g,gn20,gn40(20dBm) 2417-2457/g-turbo(20dBm) 5170-5...
by czolo
Tue Feb 16, 2016 9:50 am
Forum: Wireless Networking
Topic: Hotspot doesn't redirect to external login page
Replies: 2
Views: 1443

Re: Hotspot doesn't redirect to external login page

Can you try to connect with other devices after disconnecting the first one?
by czolo
Tue Feb 16, 2016 9:42 am
Forum: Wireless Networking
Topic: HOTSPOT: not working as it should
Replies: 5
Views: 2673

Re: HOTSPOT: not working as it should

There's too much to explain. Find someone who can diagnose your installation, and after that ask us with more details. Now it look's I have a problem somewhere, can you help me?
by czolo
Mon Feb 15, 2016 7:49 pm
Forum: Wireless Networking
Topic: Mikrotik RB2011UAS-2HnD-IN wifi performance issues
Replies: 18
Views: 12100

Re: Mikrotik RB2011UAS-2HnD-IN wifi performance issues

Some tips: - update your routeros to newest - enable cm2 package /interface wireless set [ find default-name=wlan1 ] ampdu-priorities=0,1,6 antenna-gain=4 band=2ghz-b/g/n basic-rates-a/g=6Mbps,9Mbps,12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps basic-rates-b=\ 1Mbps,2Mbps,5.5Mbps,11Mbps bridge-mode=disa...
by czolo
Sun Feb 14, 2016 1:07 pm
Forum: Wireless Networking
Topic: Cannot acces main network from second Access Point
Replies: 7
Views: 2209

Re: Cannot acces main network from second Access Point

Router, after router. Change connection from WAN to LAN.
by czolo
Sun Feb 14, 2016 11:02 am
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc [release candidate] is released, new wireless package!

Included in new wireless repeater package?
No
It was before
by czolo
Sun Feb 14, 2016 10:50 am
Forum: Wireless Networking
Topic: hotspot not directly entered login page
Replies: 2
Views: 1148

Re: hotspot not directly entered login page

Perhaps you have to configure DNS setiings in
/ip dns
Without it, hotspot will not redirect your requests.
If you can't reach any dns server (you ar not connected to Internet with your router), you can always use wildcard static dns entry.
by czolo
Sun Feb 14, 2016 10:48 am
Forum: RouterBOARD hardware
Topic: How to reduce txpower on a RB912UAG-5HPnD ?
Replies: 11
Views: 3489

Re: How to reduce txpower on a RB912UAG-5HPnD ?

Still not making sense unfortunately. I'm not interested in setting txpower to some random value determined by the phase of the moon and regulatory requirements. I want to set it to an actual power output value in the realm of engineering and physics :) Just try my solution. More faith in engineeri...
by czolo
Sat Feb 13, 2016 9:03 pm
Forum: RouterBOARD hardware
Topic: "hAP AC" with 802.3af/at PoE? Enterprise calling...
Replies: 20
Views: 9823

Re: "hAP AC" with 802.3af/at PoE? Enterprise calling...

Wa also waiting for such equipement. Now we have to use RB912 + AC card and UBI switches.
by czolo
Sat Feb 13, 2016 8:37 pm
Forum: RouterBOARD hardware
Topic: [ Cloud Router Switch Series ] - packet loss in all devices
Replies: 3
Views: 1419

Re: [ Cloud Router Switch Series ] - packet loss in all devices

Of course my "Doubting Thomas":
CRS_ICMP.jpg
by czolo
Sat Feb 13, 2016 5:55 pm
Forum: RouterBOARD hardware
Topic: How to reduce txpower on a RB912UAG-5HPnD ?
Replies: 11
Views: 3489

Re: How to reduce txpower on a RB912UAG-5HPnD ?

Hmm...that makes no sense to me. Can you explain further? To clarify: I want to set the tx power to , say, 6dB lower than the default. How can the regulatory restrictions possibly match my goals here (except by coincidence)?? There is a sense, belive me: You are trying to do something with tx-power...
by czolo
Sat Feb 13, 2016 4:14 pm
Forum: RouterBOARD hardware
Topic: How to reduce txpower on a RB912UAG-5HPnD ?
Replies: 11
Views: 3489

Re: How to reduce txpower on a RB912UAG-5HPnD ?

Try to use antenna-gain and regulatory restrictions. Tx-power automatically will be set wright values.
by czolo
Sat Feb 13, 2016 3:43 pm
Forum: RouterBOARD hardware
Topic: [ Cloud Router Switch Series ] - packet loss in all devices
Replies: 3
Views: 1419

Re: [ Cloud Router Switch Series ] - packet loss in all devices

I was reading your post in trzepak.pl forum. In my opinion - bad configuration. Primo - you have bridge, and ethernet ports in it Secundo - you are not using switch chip. All is working fine, if you know how to use it. ping interval=0.02 size=1500 address=x.x.x.x do-not Result: sent=9743 received=97...
by czolo
Mon Feb 08, 2016 4:39 pm
Forum: Wireless Networking
Topic: Change wireless propery on CAP managed by CAPsMAN
Replies: 6
Views: 25759

Re: Change wireless propery on CAP managed by CAPsMAN

nv2 is not supported in Capsman
by czolo
Sun Feb 07, 2016 10:48 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

Packet throughput is not showing values in /wir reg (in winbox tab), when client have 6.35rc5
by czolo
Sun Feb 07, 2016 4:27 pm
Forum: Announcements
Topic: v6.34.1 [current] is released!
Replies: 59
Views: 27340

Re: v6.34.1 [current] is released!

IP----> Web Proxy---------> General-------> Port show : 0 from ROS 6.34, x86, (not solve this problem)
General bug, I see it in every platforms that we have.
by czolo
Sat Feb 06, 2016 10:06 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

You have to download wireless-rep packege from all-packages. Put it into your router and reboot.
by czolo
Fri Feb 05, 2016 11:23 pm
Forum: General
Topic: Dynamism 5ghz 802. 11 ac
Replies: 1
Views: 847

Re: Dynamism 5ghz 802. 11 ac

I havev to be honest - 5X is better in throughput.
by czolo
Fri Feb 05, 2016 2:53 pm
Forum: General
Topic: BACKGROUND SCAN INCORRECT RESULTS ROSv6.35rc2
Replies: 1
Views: 1749

Re: BACKGROUND SCAN INCORRECT RESULTS ROSv6.35rc2

I don't get it
Where is the problem exacly, I see scan results in all cases.
by czolo
Thu Feb 04, 2016 5:58 pm
Forum: General
Topic: Hotspot Feature: Social Networks
Replies: 19
Views: 17012

Re: Hotspot Feature: Social Networks

That's the point. We also have such application, and for now we can: - use FB, Twitter or other ~20 social services - login types: button, social, email (editables from admin site for every location) - statics: who, when, how offen, what device type - advertising in few point, inside, after login, e...
by czolo
Tue Feb 02, 2016 5:59 pm
Forum: Announcements
Topic: v6.34 [current] is released!
Replies: 91
Views: 40656

Re: v6.34 [current] is released!

Thank you all for the report about SNMP values. Fix is on the way.
Thx, we are waiting impatiently
by czolo
Tue Feb 02, 2016 12:00 pm
Forum: Wireless Networking
Topic: Full Duplex PTP over 7 to 14Kms
Replies: 24
Views: 5605

Re: Full Duplex PTP over 7 to 14Kms

I had for 2 years a link with 4xSXT bonded. It worked very well.
What througput have you there?
by czolo
Tue Feb 02, 2016 11:59 am
Forum: Wireless Networking
Topic: CAP work independently?
Replies: 1
Views: 862

Re: CAP work independently?

No!
For now, but maybe it will change in the future (I hope so :D )
by czolo
Tue Feb 02, 2016 11:53 am
Forum: General
Topic: PCC with Hotspot Issues?
Replies: 2
Views: 905

Re: PCC with Hotspot Issues?

15k ARP entries with 70 users?????
Read this:
https://en.wikipedia.org/wiki/ARP_spoofing
by czolo
Mon Feb 01, 2016 2:54 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

hotspot - fixed login by mac-cookie when roaming among hotspot servers

How it works? Can I distribute MAC-cookie to another router?
by czolo
Mon Feb 01, 2016 1:21 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

Is there any chance for working sniffer or snooper similiar to scan? Background sniffing will be very useful.
by czolo
Sun Jan 31, 2016 10:19 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

apparently its had updated/new wi-fi drivers aside enteriely new code, based on it. did NV2 works with older packages? Yes - you can always enable old cm2, and than nv2 is working. Througput is really better, than with old wireless package. Even with 802.11 it's better, and especialy in one session...
by czolo
Sat Jan 30, 2016 11:53 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

NV2 is not working.TCP 40% better than before
by czolo
Sat Jan 30, 2016 6:57 pm
Forum: Wireless Networking
Topic: CAP wont autoprovision the 2GHz Wlan for some reason
Replies: 4
Views: 1863

Re: CAP wont autoprovision the 2GHz Wlan for some reason

Just change second line from an to ac
by czolo
Sat Jan 30, 2016 2:59 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

With new package TCP throughput is really impresive. There is a problem with nv2 connection. Client's can't connect, when protocol is set to nv2, only nstreme and 802.11 works. With nstreme, there is a problem with dynamic framin policy. I really starting to like what you are doing.Don't stop, and m...
by czolo
Sat Jan 30, 2016 12:32 am
Forum: Wireless Networking
Topic: CAP wont autoprovision the 2GHz Wlan for some reason
Replies: 4
Views: 1863

Re: CAP wont autoprovision the 2GHz Wlan for some reason

Hi
Try to change provisioning to:

/caps-man provisioning
add action=create-enabled hw-supported-modes=gn
add action=create-enabled hw-supported-modes=an
by czolo
Fri Jan 29, 2016 11:48 pm
Forum: Announcements
Topic: v6.35rc [release candidate] is released, new wireless package!
Replies: 536
Views: 177852

Re: v6.35rc is released, new wireless package!

How to run repeater mode?
Background scan, rounds, scan to file - all that feature works OK.
I see no options for station roaming. Is it "automagical" and it's default enabled when I'm using new package, or I'm missing smthng?
by czolo
Fri Jan 29, 2016 10:09 pm
Forum: General
Topic: Hotspot Feature: Social Networks
Replies: 19
Views: 17012

Re: Hotspot Feature: Social Networks

It's not so easy to implement. Maybe you consider the idea micro-payment monthly and use our external server code: It will helps us to develop new features and will allow both you and us win. For you use and have it' and us to monetize it. Here is an example: http://gcn.hotspot.aforte.net/marszalkow...
by czolo
Fri Dec 11, 2015 3:38 pm
Forum: Beginner Basics
Topic: Block Internet except facebook.com & line
Replies: 10
Views: 7229

Re: Block Internet except facebook.com & line

My idea: Use hotspot (or other proxy service) Allow only facebook like that (this is for hotspot version) /ip hotspot walled-garden add dst-host=*.facebook.com dst-port=443 add dst-host=*.fb*.com dst-port=443 add dst-host=*.facebook.com dst-port=80 add dst-host=*.fb*.com dst-port=80 add dst-host=*.a...
by czolo
Thu Dec 03, 2015 10:43 pm
Forum: Wireless Networking
Topic: how to filter local traffic in hotspot
Replies: 3
Views: 1823

Re: how to filter local traffic in hotspot

You can walledgarden local network
by czolo
Sat Nov 07, 2015 8:53 pm
Forum: Announcements
Topic: Newsletter 68
Replies: 57
Views: 26501

Re: Newsletter 68

Thx Normis for GPON.!!!
When it will be avalible, what price, how with compatibility (Dasan/Huawei?)
by czolo
Mon Oct 26, 2015 4:23 pm
Forum: Wireless Networking
Topic: Unicode SSID with MikroTik?
Replies: 2
Views: 3814

Re: Unicode SSID with MikroTik?

I understand that, but it's possible to type hex_byte code for ASCII chars, so maybe it will be simple to change it to UTF/UNICODE?
by czolo
Mon Oct 26, 2015 10:30 am
Forum: Wireless Networking
Topic: Unicode SSID with MikroTik?
Replies: 2
Views: 3814

Unicode SSID with MikroTik?

Hi
Is there any way to type UNICODE in SSID in MikroTik. Many devices is now compatible with emoji, and it will be great to have such feature in RouterOS.
by czolo
Tue Sep 01, 2015 4:42 pm
Forum: Wireless Networking
Topic: Problem with 3x3 MIMO Antennas and Netmetal
Replies: 19
Views: 7172

Re: Problem with 3x3 MIMO Antennas and Netmetal

I will try to explain it with picture: The same antennas, so identical polarisations: wrong.png It's wrong configuration, because when you face these antennas one polarisation will not match. This is how it should be: Ok.png Now it's OK - when you face those two antennas all polarisation will have i...
by czolo
Thu Jul 30, 2015 5:10 pm
Forum: Wireless Networking
Topic: Mikrotik hotspot login page
Replies: 4
Views: 4747

Re: Mikrotik hotspot login page

<html> <head> <meta http-equiv="refresh" content="0; url=login?username=user&password=pass&dst=http://landing.page.com/"> <meta http-equiv="pragma" content="no-cache"> <meta http-equiv="expires" content="-1"> </head> <body></body> ...
by czolo
Thu Jul 30, 2015 5:05 pm
Forum: Wireless Networking
Topic: Huawei E3372 LTE modem
Replies: 9
Views: 17071

Re: Huawei E3372 LTE modem

Maybe HILINK is the answer for you?
by czolo
Sat Jul 11, 2015 10:37 am
Forum: Wireless Networking
Topic: 802.11n force 40mhz channel
Replies: 13
Views: 10650

Re: 802.11n force 40mhz channel

Sorry mate, but in my opinion it's impossible. MCS is not TX-rate. You can achive 30MHz channel with custom channels with some chipsets. MCS means that it can always lower from wider to narrower channel, but only in that way.
by czolo
Sat Jul 11, 2015 10:33 am
Forum: Wireless Networking
Topic: Need help on WiFi business solution with mikrotik
Replies: 1
Views: 987

Re: Need help on WiFi business solution with mikrotik

Maybe Basebox2 with some external sector MIMO antena?
by czolo
Sat Jul 11, 2015 10:31 am
Forum: Wireless Networking
Topic: WiFi with password download very slow\without work just fine
Replies: 7
Views: 1869

Re: WiFi with password download very slow\without work just fine

Yes TKIP is evil, use AES and all will work fine.
by czolo
Sat Jul 11, 2015 10:23 am
Forum: Wireless Networking
Topic: QRT (RB911G-5HPnD) Very Low Throughput
Replies: 3
Views: 1439

Re: QRT (RB911G-5HPnD) Very Low Throughput

Yeep... Show your
/int wir pr ad
by czolo
Sat Jul 11, 2015 10:21 am
Forum: Wireless Networking
Topic: Capsman Tx low rate speed
Replies: 2
Views: 1646

Re: Capsman Tx low rate speed

Are you sure that it's package version?
From your post, I see that you have problem with tx from the AP only. RX is OK. Maybe lowering the tx-power parameter will help you?
by czolo
Sat Jul 11, 2015 10:19 am
Forum: Wireless Networking
Topic: wireless problem with Mikrotik RB941-2nD hAP lite
Replies: 3
Views: 3156

Re: wireless problem with Mikrotik RB941-2nD hAP lite

Are you sure it's correct version?
It should be dedicated for your architecture (your device is SMIPS, not mipsbe). Version have to be the same like your system ver.
by czolo
Sat Jul 11, 2015 10:10 am
Forum: Wireless Networking
Topic: setup for LTE hotspot as WAN
Replies: 1
Views: 1725

Re: setup for LTE hotspot as WAN

Questions: 1. How would I setup the Wifi to connect as the WAN to the hotspot device? 2. Can users still connect to the wifi and get NAT this way? (if its not possible we'll use a AP) 3. Is there a better hardware option then using a hotspot puke and a RB2011UiAS-2HnD-IN? 1) Use some USB LTE modem,...
by czolo
Thu Jul 09, 2015 8:15 am
Forum: RouterBOARD hardware
Topic: FYI: Photo of RB922 + R11e + enclosure StationBox InSpot
Replies: 25
Views: 9717

Re: FYI: Photo of RB922 + R11e + enclosure StationBox InSpot

According to situation, all possible types of power (RB260GSP, Gb PoE injector, power adaptor). All my installations are in buildings. We always using 24V. And perhaps the most important thing, because it's indoors, tx-power parameter is always set to 5-12dB, not more.
by czolo
Wed Jul 08, 2015 9:27 pm
Forum: RouterBOARD hardware
Topic: QCA9994 cards ?
Replies: 0
Views: 998

QCA9994 cards ?

Will it work with Mikrotik?
by czolo
Wed Jul 08, 2015 9:24 pm
Forum: RouterBOARD hardware
Topic: FYI: Photo of RB922 + R11e + enclosure StationBox InSpot
Replies: 25
Views: 9717

Re: FYI: Photo of RB922 + R11e + enclosure StationBox InSpot

It's not true, that RB912 + R11e-5HacD is not working.
We have more than a hundred sets and all of them are working correctly. Uptime are a few months.
by czolo
Wed Jul 01, 2015 1:05 pm
Forum: General
Topic: Leap second bug present on TILE devices?
Replies: 49
Views: 17084

Re: Leap second bug present on TILE devices?

Hi Normis
In our network we are using NTP package an all routers. All our CCRs crashed today. I couldn't connect and only hard power reboot helps. I was trying to touch LCD, but nothing happend. It ssems that the dvices was in hang state.

When can we expect the fix?
by czolo
Wed May 13, 2015 4:52 pm
Forum: Wireless Networking
Topic: Hotspot failing to open some websites
Replies: 2
Views: 907

Re: Hotspot failing to open some websites

It's normall.
Just check how many elements is loaded from external CDN's (outside facebook or youtube domain).
by czolo
Tue Apr 28, 2015 9:24 pm
Forum: Wireless Networking
Topic: cant connect to a wifi hotspot with password
Replies: 1
Views: 982

Re: cant connect to a wifi hotspot with password

Maybe you don't get address from DHCP. Is your RB in bridge or router mode?
by czolo
Mon Apr 27, 2015 10:05 pm
Forum: Wireless Networking
Topic: RB922 Excellent speeds of 535 Mbps! Can you go faster?
Replies: 17
Views: 8989

Re: RB922 Excellent speeds of 535 Mbps! Can you go faster?

It;s not a fake. It;s 3x3 connection in lab.
With 2x2 you can get:
hdx 550Mb.png
by czolo
Mon Apr 27, 2015 9:35 pm
Forum: Wireless Networking
Topic: Suggestion for Public Hotspot Devices
Replies: 2
Views: 1106

Re: Suggestion for Public Hotspot Devices

We are using such equipement.
afo_alu3.png
We are using Interline omni antennas and all is working perfect.
by czolo
Mon Apr 27, 2015 9:26 pm
Forum: Wireless Networking
Topic: 17GHz which is the best ?
Replies: 11
Views: 3132

Re: 17GHz which is the best ?

I can recommend BOth Racom Ray2 And Siae Alfoplus. We use both of them. Siae is far better, but Ray2 is really cheap.
by czolo
Mon Apr 27, 2015 9:23 pm
Forum: Wireless Networking
Topic: RB922 Excellent speeds of 535 Mbps! Can you go faster?
Replies: 17
Views: 8989

Re: RB922 Excellent speeds of 535 Mbps! Can you go faster?

Yep I can :)
MT_AC_test_8_11.jpg
by czolo
Wed Apr 22, 2015 9:08 pm
Forum: General
Topic: Certificate chain and signing with CA
Replies: 0
Views: 689

Certificate chain and signing with CA

Hi I have a problem with certs. I have SSL crt, private key and CA. I can't configure it in system. I can import cert and private key. But I can't sign that with CA. I'm trying to do the template, but when I'm trying to use it, I can't because there is no such option. Documentation for /certificates...
by czolo
Fri Apr 10, 2015 2:15 pm
Forum: Wireless Networking
Topic: Will it work? (2x2 MIMO antenna on 3x3MIMO RB)
Replies: 9
Views: 2312

Re: Will it work? (2x2 MIMO antenna on 3x3MIMO RB)

Or jutst disable TX on third chain.
by czolo
Sat Mar 21, 2015 11:44 am
Forum: Wireless Networking
Topic: Hotel Solution Hardware Advice
Replies: 6
Views: 2081

Re: Hotel Solution Hardware Advice

Bad idea with CAP2n. It is only one chain device, and belive me it makes a diference if you will install 2-chain APs.
by czolo
Fri Mar 20, 2015 4:45 pm
Forum: Wireless Networking
Topic: AR9888 channels with different width
Replies: 7
Views: 8062

Re: AR9888 channels with different width

Sorry, but for AR92xx was the same: in official datasheets where only information about 20/40MHz modes. So maybe it's possible?
by czolo
Fri Mar 20, 2015 4:43 pm
Forum: Wireless Networking
Topic: Wireless client walkthrough
Replies: 3
Views: 5701

Re: Wireless client walkthrough

You can't use interface for dhcp-client if it's in slave mode (is a part of a bridge). Change dhcp-client interface to bridge-local. The problem is with wireless mode. If you want to use bridge, you can't use normal slave mode, becouse this is standard mode that does not support L2 bridging. You can...
by czolo
Fri Mar 20, 2015 4:31 pm
Forum: Wireless Networking
Topic: 802.11u, Hotspot 2.0?
Replies: 3
Views: 2403

Re: 802.11u, Hotspot 2.0?

Plus 10 from me.
Do this and you will be my gods ;)
by czolo
Fri Mar 20, 2015 4:28 pm
Forum: Wireless Networking
Topic: Every user to have different Wireless password
Replies: 18
Views: 11135

Re: Every user to have different Wireless password

to deanMKD1
Try to type it in terminal than in Winbox.
by czolo
Fri Mar 20, 2015 4:25 pm
Forum: Wireless Networking
Topic: Hotel Solution Hardware Advice
Replies: 6
Views: 2081

Re: Hotel Solution Hardware Advice

I will do it like that:
katopsi tupikou orofou.jpg
For a hardware I will recomend any RB912 or Basebox. In the future, you cant add another interface. Use ceil mount antennas if you want to have good coverage.
by czolo
Fri Mar 20, 2015 4:22 pm
Forum: Wireless Networking
Topic: Auto Run Trial
Replies: 1
Views: 1000

Re: Auto Run Trial

You can change login.html to something like: <<html><head> <meta http-equiv="refresh" content="0; url=login?username=user&password=secured&dst=http://youpage.com"> <meta http-equiv="pragma" content="no-cache"> <meta http-equiv="expires" conte...
by czolo
Fri Mar 20, 2015 4:10 pm
Forum: Wireless Networking
Topic: Wireless-protocol Options
Replies: 7
Views: 3130

Re: Wireless-protocol Options

Yes, of course
by czolo
Fri Mar 20, 2015 4:06 pm
Forum: General
Topic: Hotspot profile with website blocking
Replies: 4
Views: 2450

Re: Hotspot profile with website blocking

You have to duplicate entries for every profile.
by czolo
Fri Feb 20, 2015 9:22 pm
Forum: Wireless Networking
Topic: Problem with 3x3 MIMO Antennas and Netmetal
Replies: 19
Views: 7172

Re: Problem with 3x3 MIMO Antennas and Netmetal

There are two importand things in 3x3 antenna system: - antennas should be mirrored, It means that if one ontenna is HV and +45deg, another side must have HV and -45deg. I hope it;s clear, but if someone is not understandig, I can try to make a picture that explains that. It means also that the ante...
by czolo
Fri Feb 13, 2015 12:17 am
Forum: Wireless Networking
Topic: Virtual AP across several APs
Replies: 2
Views: 1391

Re: Virtual AP across several APs

Almost
I will recomend to create vlan1 for wlan1 and vlan2 for virtual-ap. Both vlans shuold be created on ether1, but you shuold delete ether1 from the bridge. Than just bridge vlan1 with wlan1, vlan2 for virtual ap, and create the same vlans on central rb.
by czolo
Wed Feb 11, 2015 5:18 pm
Forum: Wireless Networking
Topic: How can I know if a user is connected to my HotSpot Wi-Fi?
Replies: 1
Views: 1078

Re: How can I know if a user is connected to my HotSpot Wi-Fi?

You can detect session parameters from the redirect page on MT hotspot. You have several variables that MT sends in session, that you can detect from PHP. In example - you can check if there is a value for variable "logged-in". Of cource you have to send it from MT to external PHP server. ...
by czolo
Mon Feb 09, 2015 5:00 pm
Forum: Wireless Networking
Topic: GPS sync and 802.11ac
Replies: 5
Views: 2329

Re: GPS sync and 802.11ac

There is improvement but only if all devices in frequency spectrum are using synchronization. If you have in example Cambium and MT and both of the on the same frequency, it will not work corectly.
by czolo
Sun Feb 08, 2015 12:31 pm
Forum: Wireless Networking
Topic: Login a user to HotSpot with MikroTik commands
Replies: 7
Views: 2089

Re: Login a user to HotSpot with MikroTik commands

I'm happy that I make it clear.
PS. You can always give me some KARMA :lol:
by czolo
Sun Feb 08, 2015 12:24 pm
Forum: Wireless Networking
Topic: Login a user to HotSpot with MikroTik commands
Replies: 7
Views: 2089

Re: Login a user to HotSpot with MikroTik commands

OK. I can try If user connects to your hotspot, it creates a row int "/ip hotspot host". User have to login first time, and after that it will create a row in "/ip hotspot active". There you can check username IP. Now you can bind that user with specific MAC, and choose "byp...
by czolo
Sun Feb 08, 2015 12:02 pm
Forum: Wireless Networking
Topic: Login a user to HotSpot with MikroTik commands
Replies: 7
Views: 2089

Re: Login a user to HotSpot with MikroTik commands

No, you can;t add a username into active. This action is dynamicly, and only way for that is to manually bind a specific mac to ip and than walledgarden it.
by czolo
Sun Feb 08, 2015 11:57 am
Forum: Wireless Networking
Topic: HotSpot different pool for trial users
Replies: 3
Views: 1649

Re: HotSpot different pool for trial users

I;m thinking that it may be possible
You can configure a hotspot with pool1, and than you can enable trial inserver profile, and add another profile for trial-users with pool2. It should work, but you have to check it.
by czolo
Sun Feb 08, 2015 11:46 am
Forum: Wireless Networking
Topic: Hotspot / Capsman / Vlan (Trunk and Acces) issue.
Replies: 3
Views: 1591

Re: Hotspot / Capsman / Vlan (Trunk and Acces) issue.

If so, you will get the traffic from specific AP on a router with capsman. The traffic will come on specific vlan-id, that you will configure in capsman, so only thing you should do is untag that vlan and configure hotspot on it.
by czolo
Sun Feb 08, 2015 11:44 am
Forum: Wireless Networking
Topic: Re: How to make the connection to the second HotSpot
Replies: 1
Views: 1080

Re: How to make the connection to the second HotSpot

Hotspot works on interface. I see that you haven't configured hotspot on port-1 on main router. You can use gre/eoip tunnel and bridge it with port-5, and it should work. Alternative is a modification of firewall rules on main router. You have to change the rules that describes the traffic that is r...
by czolo
Sun Feb 08, 2015 11:36 am
Forum: Wireless Networking
Topic: Login a user to HotSpot with MikroTik commands
Replies: 7
Views: 2089

Re: Login a user to HotSpot with MikroTik commands

You can walledgarden him by MAC or IP
by czolo
Sat Feb 07, 2015 10:39 am
Forum: Wireless Networking
Topic: HotSpot HTML Pages Scenario
Replies: 3
Views: 1488

Re: HotSpot HTML Pages Scenario

by czolo
Fri Feb 06, 2015 4:24 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 200
Views: 127644

Re: CAPsMAN v2 ready for testing

I have a question, why I can't configure vlan-mode on virtual-ap?

I can set it in normal mode only for master wlan card. If I'm using capsman, I can put a traffic from specific slave vap into a vlan. So why this funcionality is not accesible in normal mode for manualy created vap?
by czolo
Sun Feb 01, 2015 10:05 am
Forum: Wireless Networking
Topic: Hotspot redirect
Replies: 9
Views: 4018

Re: Hotspot redirect

It's possible, if you are using external authentication server. You can redirect to external server, and make every user unique account based on MAC addres. You can take MAC from MT-hotspot (it's one of the variables in session). If you have a MAC, you can generate password and put it in Radius data...
by czolo
Sat Jan 31, 2015 12:52 pm
Forum: Wireless Networking
Topic: Hotspot redirect
Replies: 9
Views: 4018

Re: Hotspot redirect

Thanks friend. This is going to be free wifi internet but I want to limit users by bandwidth and time. They should stay connected for about 2 hours and after that they will need to login again. So, I dont need user type anything. All I need is this: 1. User connects to wifi 2. User opens the browse...
by czolo
Fri Jan 30, 2015 10:00 am
Forum: Wireless Networking
Topic: Hotspot redirect
Replies: 9
Views: 4018

Re: Hotspot redirect

Yes, all above works with Mikrotik. First of all, read wiki: http://wiki.mikrotik.com/wiki/Manual:Customizing_Hotspot http://wiki.mikrotik.com/wiki/HotSpot_external_login_page You can just create a html page, where you have a <form>, with login, password and submit button. You can write login name i...
by czolo
Thu Jan 29, 2015 11:32 pm
Forum: Wireless Networking
Topic: Hotspot redirect
Replies: 9
Views: 4018

Re: Hotspot redirect

All is possible :) Our system use responsive web pages, like this: login_demo.png As you can see, you login with just ACCEPT button, or by typing your e-mail, or... by login with your social accout in facebook, google, twitter etc. See this demo: http://hotspot.aforte.pl/Trinity_Park_III/ It use onl...
by czolo
Thu Jan 29, 2015 11:27 pm
Forum: Wireless Networking
Topic: Qualcomm QCA 9990 Plans
Replies: 2
Views: 1993

Re: Qualcomm QCA 9990 Plans

Or maybe Quantenna QT3840BC?
by czolo
Fri Jan 23, 2015 10:20 pm
Forum: General
Topic: CAPsMAN v2 ready for testing
Replies: 200
Views: 127644

Re: CAPsMAN v2 ready for testing

We just have finished our third installation with Capsman, and we have some ideas: 1) Radius server should be cofigured for specific interface, like in hotspot, where I can chose a domain for a hotspot and than setup radius for a specific domain. In access-list it will be useful to have automated co...
by czolo
Wed Jan 21, 2015 10:05 am
Forum: General
Topic: CAPsMAN vs WPA2-Enterprise
Replies: 7
Views: 4359

Re: CAPsMAN vs WPA2-Enterprise

We need that funcion too.

We have to authenticate users to different SSIDs with different Radius servers. MT plese code it !!!!
by czolo
Mon Nov 03, 2014 1:15 pm
Forum: Wireless Networking
Topic: 802.11ac tests results and opinions
Replies: 21
Views: 10324

Re: 802.11ac tests results and opinions

Some tests from our network:
If you like it, give me some Karma points :D
Hi czolo,

What distance did you have there and which antennas have you used ?
Distance about 400m.
I don't want to make any advertise, so priv me.
by czolo
Sat Sep 13, 2014 1:35 pm
Forum: RouterBOARD hardware
Topic: US MUM - New Products?
Replies: 11
Views: 4039

Re: US MUM - New Products?

More photos of cAP
Image
Image
by czolo
Fri Sep 12, 2014 10:27 pm
Forum: General
Topic: US MUM - No live feed?
Replies: 4
Views: 2360

Re: US MUM - No live feed?

I missed the first presentation :(
Is somewhere available the Normunds opening presentation's PDF?
+1
by czolo
Fri Sep 12, 2014 9:59 pm
Forum: RouterBOARD hardware
Topic: US MUM - New Products?
Replies: 11
Views: 4039

Re: US MUM - New Products?

Can you please ask Normunds to put his presentation pdf on the mikrotik wiki?
YES YES YES
I am also really interested in :lol:
by czolo
Mon Jul 28, 2014 6:13 pm
Forum: RouterBOARD hardware
Topic: COMPEX WLE600VX miniPCIe on RB912UAG-2HPnD
Replies: 2
Views: 1947

Re: COMPEX WLE600VX miniPCIe on RB912UAG-2HPnD

Card is OK. We are using Cyberbajt anntenas with them.
by czolo
Sat Jul 26, 2014 2:54 pm
Forum: Wireless Networking
Topic: guest access with web authentication
Replies: 2
Views: 1817

Re: guest access with web authentication

Yes it is. Just look at hotspot at mikrotik wiki page
by czolo
Fri Jul 25, 2014 6:24 pm
Forum: Wireless Networking
Topic: 802.11ac tests results and opinions
Replies: 21
Views: 10324

Re: 802.11ac tests results and opinions

Wow! What card is it? Is an SXT/NetBox? How much distance? How much signal? Can you post "Status" section? Is it a MIMO? 80MHz? We are still durning tests now. We have 2xRB912 + 2xMiniPciEx. Now we are waiting for NetBox, but they will come after the weekend. Cards are from Compex, and it...
by czolo
Fri Jul 25, 2014 6:07 pm
Forum: Wireless Networking
Topic: 802.11ac tests results and opinions
Replies: 21
Views: 10324

Re: 802.11ac tests results and opinions

Some tests from our network:
If you like it, give me some Karma points :D

Image
Image
Image
by czolo
Mon Jul 21, 2014 8:24 pm
Forum: Wireless Networking
Topic: Sxt 2-HnD - bugged wireless, 6.15
Replies: 11
Views: 3505

Re: Sxt 2-HnD - bugged wireless, 6.15

You are using SXT through a windows and you complains for bad CCQ... ehhh!

Use sector antennas, do not SXT, lower the TX-power, or ... brake the windows.
Make anything that makes the signal better. Remember that all equipement works as good as the worst element in it.
by czolo
Mon Jul 21, 2014 11:20 am
Forum: Wireless Networking
Topic: 802.11ac tests results and opinions
Replies: 21
Views: 10324

Re: 802.11ac tests results and opinions

We are talking about WLE900VX - there isn't such PIN there.
by czolo
Sun Jul 20, 2014 1:49 am
Forum: Wireless Networking
Topic: 802.11ac tests results and opinions
Replies: 21
Views: 10324

Re: 802.11ac tests results and opinions

I finally got around to setting this up. rb912uag-2HPnD with Compex WLE900VX minipci-e. Either this card is not "fully" supported or I have more configuring to do. Running btest client from windows 8 laptop through rb912 to CCR1009. It is strange that rx rate is locked at 6Mps. Conntact m...
by czolo
Thu Jul 17, 2014 3:10 pm
Forum: General
Topic: Freezing / disconnection of Winbox over PPTP VPN
Replies: 10
Views: 6506

Re: Freezing / disconnection of Winbox over PPTP VPN

Version 6.16 solves this problem.
by czolo
Tue Jul 15, 2014 8:35 pm
Forum: Wireless Networking
Topic: No luck with Compex WLE600v5-23
Replies: 4
Views: 2112

Re: No luck with Compex WLE600v5-23

THX
Now I see it: "Customers have to connect a 5V power supply to the pin on WLE900N5-23. "
by czolo
Tue Jul 15, 2014 8:33 pm
Forum: Wireless Networking
Topic: Dual nstreme and wireless-fp and v6.15 any changes?
Replies: 27
Views: 6273

Re: Dual nstreme and wireless-fp and v6.15 any changes?

It will be awesome if Mikrotik can repair dual-nstrem. Imagine dual-nstreme link with two 802.11ac separate links and FDX throughput more than 600Mbps full-duplex!!!

Please MT-Team think about it!!!
by czolo
Tue Jul 15, 2014 12:45 am
Forum: Wireless Networking
Topic: No luck with Compex WLE600v5-23
Replies: 4
Views: 2112

Re: No luck with Compex WLE600v5-23

Can you put here a link where have you found information about that 5V pin?
by czolo
Tue Jul 15, 2014 12:41 am
Forum: Wireless Networking
Topic: Sxt 2-HnD - bugged wireless, 6.15
Replies: 11
Views: 3505

Re: Sxt 2-HnD - bugged wireless, 6.15

If all of those are indoors installations try to lower TX-power to something like 5-9dBm (all-rates-fixed for Ar9300)
by czolo
Sat Jul 12, 2014 2:44 pm
Forum: RouterBOARD hardware
Topic: News about new products is secret or when SXTG-5HacD comes?
Replies: 20
Views: 9571

Re: News about new products is secret or when SXTG-5HacD com

We need 3 chain mimo with JACK :)

All products with SFP connector should have a DC jack connector.
This is not a problem. You can use PoE-injector and short RJ45 patchcord
Image
by czolo
Sat Jul 12, 2014 2:25 pm
Forum: Wireless Networking
Topic: 802.11ac tests results and opinions
Replies: 21
Views: 10324

Re: 802.11ac tests results and opinions

I should have Compex 802.11ac QC9882 mini pci-e card Monday. Plan to install in RB912UAG-2HPnD as indoor AP with 3 MT 3dbi antenna. Only client I have is Lenovo laptop with built in Intel ac card. Will report back!
It will be hard to do, because QCA9882 is 2x2 only :D
by czolo
Fri Jun 20, 2014 2:50 pm
Forum: Wireless Networking
Topic: Recomanded Indoor AP
Replies: 4
Views: 2139

Re: Recomanded Indoor AP

Hello,

We have a hotel with 3 floors and 14 rooms on each one. What is the best AP with also DualBand (2,4 + 5GHz).

Reagrds,
Andrei
You can try RB912 + r11e-5HnD. You can put it all into:
http://www.rfelements.com/en/products/e ... ox-inspot/
by czolo
Fri Jun 20, 2014 2:45 pm
Forum: RouterBOARD hardware
Topic: RB953GS-5HnT!!!! 3x3 MIMO finally is there!
Replies: 12
Views: 8414

Re: RB953GS-5HnT!!!! 3x3 MIMO finally is there!

Is there an enclosure available designed for this device?
Ther is something like this:
http://www.cyberbajt.pl/produkt/4332/gi ... o-3x3.html
by czolo
Tue May 20, 2014 11:30 pm
Forum: Wireless Networking
Topic: 200Mbit/s Wireless Link over 80m distance?
Replies: 6
Views: 2191

Re: 200Mbit/s Wireless Link over 80m distance?

Use this card:
http://www.interprojekt.pl/wiki/Wiki.js ... X-WLE350NX
and put it in RB912. At 80m you should get more than you want.
by czolo
Fri Apr 25, 2014 9:55 am
Forum: Beginner Basics
Topic: winbox pptp
Replies: 39
Views: 11270

Re: winbox pptp

The same problem in my network. When I try to connect through PPTP tunnel, the connection stops randomly. Sometimes I can connect with Winbox, and after a few seconds connections stops. The same situation, but connection to public IP of the same router works perfectly. Bug occurs from version higher...
by czolo
Sat Apr 05, 2014 11:17 pm
Forum: General
Topic: When 802.11ac radio @ mikrotik ?
Replies: 7
Views: 5471

Re: When 802.11ac radio @ mikrotik ?

It's worth it.
Test from my home (RT-AC68U + PCE-AC68) link with signal -52, and result: more than 85MB/s in downloading a one big movie file!
by czolo
Sat Mar 29, 2014 10:14 pm
Forum: Wireless Networking
Topic: CAPs Manager
Replies: 165
Views: 75498

Re: CAPs Manager

A few questions for developers: 1) are you planning to make certifications, or any other compability with WiFi Passpoint? 2) In the documentation you mention about "interworking". I do not see any options in real package. What options are you planning to put there? 3) Can you add an option...
by czolo
Wed Mar 26, 2014 1:57 pm
Forum: Wireless Networking
Topic: Ubiquiti vs Mikrotik
Replies: 75
Views: 77249

Re: Ubiquiti vs Mikrotik

I second this. But what makes me looking into ePMP is that there is no sign from MT that they are willing to implement ATPC and GPS. So on the wireless side they still behave like amateurs. Plug in a radio and poke around until there is some reasonable speed. Feels like there is no deeper knowledge...
by czolo
Wed Mar 26, 2014 12:56 pm
Forum: The User Manager
Topic: Voucher print for Android / Windows - free Demo version available
Replies: 66
Views: 36731

Re: Voucher print for Android for UM (new Windows CLI availa

I have a problem with session timeout limit. Your App is connecting to UM, but it does not close the API connections. It look's like that: API-connections.png The problem is, that sometimes it affects the connection to the printer. I do not know exactly how, but due the large amount of unclosed call...
by czolo
Sun Mar 02, 2014 12:22 pm
Forum: Wireless Networking
Topic: QRT-2 Really!?
Replies: 8
Views: 3863

Re: QRT-2 Really!?

This is only a possibility. You don't have to use it only with full power. You can set tx-power to lower values.
It's like having a sports car. You can drive it slower than max on the speedometer ;)
by czolo
Mon Feb 24, 2014 5:26 pm
Forum: Beginner Basics
Topic: Invalid connections
Replies: 6
Views: 4057

Re: Invalid connections

Throw out protocol=tcp from your regules.

If it helps, you can give me Karma ;)
by czolo
Fri Feb 21, 2014 10:48 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 145
Views: 73512

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Hi Normis. Thanks for this PDF.

When other presentations will be available in WIKI ?
by czolo
Thu Feb 20, 2014 10:43 am
Forum: General
Topic: MUM Europe 2014 - Italy, Venice, February 20-21
Replies: 145
Views: 73512

Re: MUM Europe 2014 - Italy, Venice, February 20-21

Any news about new hardware?
by czolo
Thu Feb 06, 2014 9:13 am
Forum: Wireless Networking
Topic: Switch instead of router?
Replies: 2
Views: 1515

Re: Switch instead of router?

Experts. I have a link between a Nano5 and RB433 running ok. The question is what happens if in the other side of nano 5 i connect a switch instead of a router? (the Nano5 is connected as a bridge ). in the dhcp table of RB433 i see a new device, but without mac address. what happens to the bandwid...
by czolo
Wed Jan 15, 2014 1:52 pm
Forum: The User Manager
Topic: Voucher print for Android / Windows - free Demo version available
Replies: 66
Views: 36731

Re: Voucher print for Android for UM (new Windows CLI availa

Can I obtain a VAT-EU invoice for purchasing your app?
by czolo
Tue Jan 14, 2014 5:37 pm
Forum: The User Manager
Topic: Voucher print for Android / Windows - free Demo version available
Replies: 66
Views: 36731

Re: Voucher print for Android for UM (new Windows CLI availa

I have problem with QRCode My printer is TM-T20, and when I', printing [QR], I got that: ... The QR feature is only compatible with a few thermal printers which support Raster Bit Image printing (ESC/POS command GS v 0). We've not been able to use it on any Epson TM-xxx printer, at least those that...
by czolo
Tue Jan 14, 2014 5:30 pm
Forum: The User Manager
Topic: Voucher print for Android / Windows - free Demo version available
Replies: 66
Views: 36731

Re: Voucher print for Android for UM (new Windows CLI availa

I have problem with QRCode My printer is TM-T20, and when I', printing [QR], I got that: ... The QR feature is only compatible with a few thermal printers which support Raster Bit Image printing (ESC/POS command GS v 0). We've not been able to use it on any Epson TM-xxx printer, at least those that...
by czolo
Tue Jan 14, 2014 4:08 pm
Forum: The User Manager
Topic: Voucher print for Android / Windows - free Demo version available
Replies: 66
Views: 36731

Re: Voucher print for Android for UM (new Windows CLI availa

I have problem with QRCode
My printer is TM-T20, and when I', printing [QR], I got that:
Ticket_1.jpg
by czolo
Mon Nov 04, 2013 8:56 pm
Forum: RouterBOARD hardware
Topic: A ptp link with RB911
Replies: 2
Views: 1508

Re: A ptp link with RB911

We have a ptp with rb411ah+rb800, single chain at 40 MHz, nstreme and WDS (but not for bridging). Max throughput is ~ 70 Mbps, with a cpu load on the 411ah about 60 %. For 1 day, we used a rb911, ROS 5.25, single chain, nstreme and WDS. At 60 Mbps, packet loss was about 7 %. Routing table isn't so ...
by czolo
Mon Nov 04, 2013 8:52 pm
Forum: RouterBOARD hardware
Topic: CRS Switch - How's it coming?
Replies: 21
Views: 10875

Re: CRS Switch - How's it coming?

(anyone knows a part number?)
Yep
This is "QCA 8513L"
Image
by czolo
Wed Jul 17, 2013 5:51 pm
Forum: Wireless Networking
Topic: Ptp Nv2/WDS DataRates 270Mbps slow internet
Replies: 16
Views: 6261

Re: Ptp Nv2/WDS DataRates 270Mbps slow internet

Hi czolo,
Bandwidth test send udp 98Mbps and in recivce 96mbps;
And how it looks with TCP and one session test?
by czolo
Wed Jul 17, 2013 5:50 pm
Forum: Wireless Networking
Topic: Ptp Nv2/WDS DataRates 270Mbps slow internet
Replies: 16
Views: 6261

Re: Ptp Nv2/WDS DataRates 270Mbps slow internet

I think I found the problem.
During the installation of antennas have been inverted channels(chain0,chain1)

possible cause?
Yes, if You have such big difference between chain 0/1, you can try to set it another way.
I hope it will help. Both chains should have similar signals.
by czolo
Wed Jul 17, 2013 10:21 am
Forum: Wireless Networking
Topic: Ptp Nv2/WDS DataRates 270Mbps slow internet
Replies: 16
Views: 6261

Re: Ptp Nv2/WDS DataRates 270Mbps slow internet

Hi all, i have ptp mikrotik 5.24 in NV2+Wds RB:433ah AP MODE : BRIDGE STATION: STATION WDS CCQ: 89%/90% DISTANCE 12KM DATARATES 240Mbps/240Mbps My problems: 1) Btest from ap to station: 80mbps tcp/send and 80mbps/recive I was expecting something more... 2) All connection to internet is very slow ma...
by czolo
Tue Jul 16, 2013 3:29 pm
Forum: Wireless Networking
Topic: PtP 17GHz with Alcoma MP vs Saf Lumina
Replies: 32
Views: 10051

Re: PtP 17GHz with Alcoma MP vs Saf Lumina

Its not cheaper ...
Where can I buy complete Alcoma link with >400Mbps, for less than 4k Eur?
by czolo
Tue Jul 16, 2013 3:21 pm
Forum: Wireless Networking
Topic: PtP 17GHz with Alcoma MP vs Saf Lumina
Replies: 32
Views: 10051

Re: PtP 17GHz with Alcoma MP vs Saf Lumina

You may be interested in this solution: Siae AlfoPlus 17Ghz. It's much better than Alcoma, because it has QAM1024. As I know it's also cheaper. Its not cheaper and Alcoma supports - Channel bandwidth 3.5 - 112 MHz - Modulation scheme QPSK - 1024QAM - Transmission capacity up to 920 Mbps full duplex...
  • 1
  • 2