MikroTik

taloot

how is it perform comparing to rb751g?

taloot

i bought 20 units, 3 hours project, takes from me 5 days, and alot of expansise, very bad soho device, a drawon flagship of mikrotik soho, only workable on 2412 to 2427 other than that its waste of time, hardware design bug, EVM and couple of readings should be tested before release a broken arm dev...

taloot

is there anyway to update dyndns without abusing there services?

taloot

Look up the dyndns (and changeip, etc.) scripts on the wiki. You can modify them to resolve the other end periodically and update the configuration. yeah thanks i was working on it and it has been solved, script is very simple i add the famous dyndns script on server (vps) :global "eoipint1&qu...

taloot

thanks fewi for your reply yeah i refer to cisco already, hehe, i m very happy with GRE, i know that EOIP and GRE almost the same, but GRE is much faster and i want to run scrip to update my remote ip (in vps) and source ip (on RB750G) i found alot of similar script for EOIP, but i faced problem on ...

taloot

is the mpls faster and less overhead than GRE?

taloot

hello guys i have rb750 and mikrotik hosted on VPS, i use it to access netflix and other movies service that designed to be used in USA, and as you know guys for streaming you need a very stable connection and fast, i used EOIP ( very slow) and pptp ( good speed but not very fast response) then i go...

taloot

i did many many try and it works for me BUT ( big but here) can i bridge the ether1 and bonding1? or whats the best way for it coz i noticed many router dealy and hangs and timeouts ( my 2 links are very solid) is it better to bond the pysical interface or vlan or eoip it works for me and i can see ...

taloot

hello guys i was working all day to solve this problem i have p2p link --- speed is above 50mbps 40km going from point A to point C and there is point in the middel of the way called B we install wireless based on rb411A we install in point a 1 unit point b 2 units point c 1 unit everything work fin...

taloot

for me i have RB333 i have problems with compression and nstreme with rc2 didnt try the the rc1 Just thhis weekend I seen teh same problem with 2.9 Will work but then disconeect and bounce in and out of connection I turned compression off and it worked could you please tell what version of the soft...

taloot

Hello, I just bought RouterBOARD 133, and I did pay $212 USD for it. I want to use this RouterBOARD to be able to control the internet's users in my Network. I searched in the internet looking for any infromation may help me to get start but I did not find :( Now I have this RouterBOARD but I do no...

taloot

for me i have RB333
i have problems with compression and nstreme with rc2

didnt try the the rc1

taloot

100% from the pigtail i faced it today

regards

taloot

I have updated a RB133 to 3.0 beta 10 without problems.

me2 also with 112 no problems

taloot

what are you using for power ?

95% power issue

whats ur power??

18v?

whats your ethernet cable and whats the length u are using

i m using a good brand cable S&M 30meter 2 XR-2 cards, works perfect 18v 1 amp
i repalced it to 19v 3amp laptop power supply which is more than perfect

taloot

hi guy 2 days ago the temp was 141.8 F which is 61 C i have 2 xr2 in the alminum Box every thing is working stable and sold as rock after 2 weeks its expected to have 70 c under direct sun light will keep u updated mikrotik is become very sold in version 2.9.43 from all sides (good work keep going)

taloot

an XR2 and an SR2 are going to peak a significant current if they both TX together. (check the data sheet) I would suggest the bulk decoupling on the PSU on the board may not be enough with two high power cards to absorb such a high current transient without causing voltage drop and potential syste...

taloot

just easy

go to your adsl router

and choose bridge insted or PPPOA or PPPOE

and setup the vpi and vci on ur modem

then go to MT

create a pppoe client bond to your wan interface which is connected directly to you ADSL modem

then enjoy

taloot

i only restart when i update

for adsl issue you could make the the MT to have PPPOE client and your adsl modem should be bridge it should work gr8

taloot

i hope everything is going fine and stable and i wish from mikrotik to resolve some issues in wireless i have descition with some guys in the forum that they agree with the 2.9.38 is much much stable espacilly on SR2 in XR2 also see some improvments i m not talking like this becouse i hate UBNT or M...

taloot

thanks but simply guys what version u are using????? why is 2.9.38 more stable than 2.9.42 in 3 locations i uesd it in point to point all mikrotik rb133 xr2 nstreme doesnt work for me @ all on 2.9.42 just in version 2.9.38 works gr8 is that ringing a bull??? btw guys you remeber 1 year ago when i po...

taloot

keep in mind guys that i really like mikrotik and ubnt hardware but i m looking for a fix

btw tgrand do you have XR-2 installed and running??

taloot

then why should i buy and give proposal for 600mw?? lets say 200mw and finish FYI i uesd and tried 500mw overboost it to 29dbm working up and stable as rock for 5 days now why is taiwan engineer better than USA Engineer??? why all this advertisments on the ubnt hardware? why should i pay alot of mon...

taloot

i tried 2 xr-2 and 2 SR2

rb133 rb112

hyperlink 15dbi
pheneet 15dbi

all, have no stable pinging why another card is stable?? and SR2 and xr2 isn't
we need a help guys

have you tried the diffrent between 2.9.38 and 2.9.42 why .39 is more stable??

taloot

xr2 good go for it IF ITS INDOOR

mikrotik solution as more than gr8 on indoor enviroment also very relible WDS and repeaters u can't find better than it

if u dont want to face anyproblems just go for R52 cards its regular quite card or any atheros based card AR5006

taloot

so the SR2 and XR2 is uesless?? anyway i tried a taiwaness 500mw radio guys really the ubnt radios is uesless EXtremly uesless ues amplifre with R52 i think it will be much better than power hangry cards anyway i have an order of 25 AP but i refused to supply him with extremely high priced card + un...

taloot

normally you got higher than 400mw

except with senao its arround 315 MW

taloot

i always hear some ppl talking about the heat!!! its 43 c today and everything is running and stable as rock even last summer it was 65c it was directly under the sun but i never ever compline about heat issue guys mikrotik is gr8 and we do have faith on it but we like to have more support and devlp...

taloot

mmm sounds gr8 have you tried 50 meter without the standard? if u could make 20 meter cable without the colour standard you will be lucky man i m in networking cables and wireless from 10 years i m now 24years old - 10 years = 14 years old boy (it was as hoppy not as biz) i m sure when the poster ue...

taloot

we are using 133 boards with 50mtr CAT6 cable and 18v 1.1A POE getting frequent RTOs and latency , is any one facing this probelm, by using of 24v 1.0A adapter help us out. please let me know. regards hi ues ur laptop power supply if its 19v u will see some improvmends, but from my experince the am...

taloot

never disabled the XR2, never "touched" anything. We noticed some occasionally disconnection from wireless client, what do u mean by that i tried our new 500mw mini-pci i noticed it has higher recive signal than XR-2 it was -71 now its -66 same postion same location same every thing btw m...

taloot

we are using 133 boards with 50mtr CAT6 cable and 18v 1.1A POE getting frequent RTOs and latency , is any one facing this probelm, by using of 24v 1.0A adapter help us out. please let me know. regards hi ues ur laptop power supply if its 19v u will see some improvmends, but from my experince the am...

taloot

Sure!

At the moment, i'm only able to provide what you want with an XR2 (i put it on two days ago, replacing the Senao) installed on a RB532 (there's also a SR2 for backhaul).
Is this on your interest? If yes, i will answer on this evening.

sure

taloot

i install a wireless link using omni directional in the biggest power station in the middel east

no problems execpt 1

power outage error in mikrotik i give it more more power everything goes fine

taloot

hello,

could you please tell's us whats your signal TX and RX and whats your noise floor

also what about the pinging time??

taloot

from my experince with ubnt cards

it works well inside the city
but outside and remote area that has no wireles @ all its bugy with them

whats that could lead?

taloot

hi i need 1mb @ least
distance is 5 km

taloot

hi guys the XR2 giving me 28dbm on default tx power but from my tests guys the ubnt cards are not recomended @ all @ least on the 2.4ghz i have SR2 and all of them are installed outdoor and its hard to me to got it also the XR2 now its installed but i m going to recive a very good quility of 500mw c...

taloot

mmmmmm i dont know whats wrong it drive me crazy man
also its only operation on channel 2412 and 2462

taloot

very disappointing solution

taloot

even when using version 2.9.38 after 3-5 hours of working i m start getting very high latency why this should happend anyone could confirm or deny this?? why mikrotik = high pinging cheap AP= good pinging rate is it very hard to fix? is it XR-2 faulty? is it my fault? is it my location is it my POE ...

taloot

i m using 18v 1amp running XR-2 and 200mw atheros 5006 card with now problems

except when i do overclocking for the wireless card (30.5dbm) i justhave to ues 19v 3.45 amp in this case everything going stable i m using 25meter cat5 cable

its just a powerfull peace of silicon

taloot

have you tried throw ip/neighboor?
it works for me all the cases

taloot

hello guys from my tests on the ubnt radios i noticed that its not stable at all with omni direction ( we dont need high power on directional and p2p link) i tried 2 SR2 and 2 XR-2 and 3 diffrent boards 6 antennas even 2 kind of enclusers 3 diffrent kind of POE ubi always always always having pingin...

taloot

ok for your information guys

i have 2 cards

one is 200mw

the other is SR2

i have a signal -80/-79 the speed i got is 22mbps in both sides

i dont think it has high effect

taloot

:log info "DDNS: Begin" :global ddns-user "taloot" :global ddns-pass "password" :global ddns-host "*1" :global ddns-interface "pppoe-out1" :global ddns-ip [ /ip address get [/ip address find interface=$ddns-interface] address ] :if ([ :typeof $ddns-l...

taloot

whats the power supply?

taloot

are you testing from RB to RB

or from Windows (wirless link) windows?

taloot

I'm having the same problem with SR2s and 12dBi Omnis. How hight to you have the antenna?

try 2.9.38 and see if it will resolve ur problem and reply back to us

taloot

not test the R52 it self but i test somthing very very like the r52 and i think its the same

i got 17dbm

when i overRF i got 21-22 dbm

taloot

hi, we just put one XR2 in our 133board and the default power it is showing is just 18dbm can you confirm if you are getting the same thing , also in bench test the signals of XR2 were quite high as compared to Sr2 let me know some details regarding this, if you can regards i test it with RF meter ...

taloot

do you have it stable also in version 2.9.38??

anyway i have one point using 2.9.42 and its stable ( but 3 of them arent stable)

i dont know whats wrong with mikrotik wireless

we are looking for more more wireless support and upgrades

taloot

I'm having the same problem with SR2s and 12dBi Omnis. How hight to you have the antenna?

can you add me in your msn b4 we post anything we need some more extisnive test b4

taloot(at)hotmail(dot)com

taloot

You need to test like this : testbox ------->RB------>PC not rb-----> PC Anyway what dya want for a couple of hundred euros ? If you want a 300meg link , they cost 20,000. Thats what I did and I get 48mbps at maximum I DON'T SPEAK ABOUT LINKS , it's becoming boring to mention that in every post. It...

taloot

hi guys we would like to specify this for anyone hwo is intersting in the XR2 we would like to talk about ( performance, problems, bugs, TX power stability) after i finished the testing today i got the results as following the antenna mode doesnt effect anyway a b tx-a rx-b all the same the defualt ...

taloot

thanks it has been fixed

i m just rise the antenna one extra meter and every thing go just gr8 in both sides

taloot

hi all of you guys i m really in serious problem Big problem i m using the XR-2 and SR2 i uesd rb112 and rb133 i m always having alot of timeout in the connection packet loss arround 15% i m using 3 diffrent brand of omni-directional 15db even if my signal is high i m getting loss my noise floor fro...

taloot

http://www.bvsystems.com/Products/Spect ... terfly.htm

this is it

i buy it from them

also its gave me special price but ithink the regular price should be less than 650 USD

taloot

i Test the XR-2

on defualt i got 28dbm

once i make card rate i and set the tx power to 28 dbm i got on my meter 30dbm + (my meter max is 30dbm)

unbelivable powerfull mini-pci = to amplifire 1 watt on signal range

any question?

taloot

yes i do the max is 28dbm for the SR2 but the signal isnt stable it keeps jumping from 26-27 to 28 so its not recomended i dont have SR5 to test XR2 i have its in DHL now i m going to bring it after 1 hour and i will let you know the result SR2 @ 28dbm like nmp-8602 @ 26dbm (senao gaves up the maxui...

taloot

hello

i have a chnage ip scrip that working gr8 on 2.9.xx but not working on v3b7

any idea guys

taloot

hi
i just bought RF power meter

the defualt for the SR2 is 26dbm = 400mw

ALSO anyone want a help in TX power i m welling to do so

btw with senao i got arround 24dbm

taloot

here in saudi we never face weather like this

will let you know when i lost the RB and the radios loooooooool

taloot

did you try v3b7? check you ethernet that goes from router to the pc (behind MT) make sure its not gigabit ( i got only 19mbps with some of them) also access you motherbord bios and disable everythink that u dont need (USB Audio printer interface anything that u dont need then try) locking up router...

taloot

ahha thats fine i think i will replace the omni

there was no surge protector

i installed now surge protector but i istalled it upside down is that will effect? the bulkhead side to antenna using N Bulkhead to N

taloot

hello guys i lost a routerboard and 2 wireless card during lighting storm hit the omni directily

thr RB112 has been gone

do you think guys that i should change the omni or just keep it?

taloot

i got same performance with rb133 on 2.4ghz turbo enabled signal is -74/-76 CPU was 85%

taloot

i think mikrotik need to improve some drivers and functions to be the number 1 solution

taloot

i made it in this time looool
just finish with it and i will sleep now then i will do full test tommoro
thanks mipland for late night help

cheers

taloot

do you have any digram will make it easy for me

i dont think the card is damag becouse beforei remove the switch it was working

taloot

i install 19v 3.42Amp laptop power supply with 2 SR2 and 1 200mw card works fine so far and the power supply is cold(compare when i connect it to the laptop) i start using laptops power supply its more profssional than regular power supplys even better than POE power supply i m buying non orginal to...

taloot

i have alot of cards that is not uesable now its become littel bit deaf (-15 to -20) db of the drop on the signal

i remove the diversity switch and i solder direct wires i good very good RX signal

but there is no TX signal @ all

anyway have this knowelage or he did that before?

taloot

yes nothing new wds doesnt help,

i tried diffrent card than SR2 based on AR5006x 200mw and it works ok with the pinging but lower coverage what that should be from?
( i mean why the SR2 having this problem) defect from fap-corp?

taloot

yes nothing new wds doesnt help,

i tried diffrent card than SR2 based on AR5006x 200mw and it works ok with the pinging but lower coverage what that should be from?
( i mean why the SR2 having this problem) defect from fap-corp?

taloot

hello guys the wds disabled but nothing happend not better not worest any very very very expert guys have same case and he resolve it the area is one of the most solti areas in the world it has full lakes of sult is this have anything to do ? buti tried diffrent access points and it works gr8 and st...

taloot

the antenna is about 23 meter than the ground the area is totally flat i can connect to the ap directly from the laptop for 9km away from the ap (which is very strong) also i have MT to MT connection omni to omni over 13km link the signal is -78/-76 also there is problems with the pinging i got a lo...

taloot

hello guys, i change the SR2 and cables RB pigtail antenna POE but still the same any votes for the outdoor case?? for the grounding will help soo much when i install the ap in the room and leep pingping it i got stable results but in OUD enviroment i good very very bad performance i need your help ...

taloot

this is not related to the power supply u need to do more grounding diversity switch die 6 months ago i bougt 10 pcs now all of them is broken

normally it takes 1 -3 weeks to die very bad

taloot

ok thanks guys alot i will order the xr2 just to see the diffrence and let you updated guys

taloot

for more info guys

the card was operating on the wrong antenna port for 3 weeks (sure it wasnt working but we was having another card in the box) is that could damag the card

taloot

hello,,

i change the antenna but nothing happend,

any suggestion for me to ues the u.fl connector is it better than mmcx??

i will die guys from this

any suggestion or votes to change the radio??

good signal = bad pinging 700-900 ms

taloot

if you are so close the pinging less than 20 ms

dont u think its from antenna??

throw WDS interface 5 km from the access point its stable but directly from laptop its not good @ all

taloot

sorry guys i mean mmcx connector but i type u.fl by mistake

guys do you think the antenna problem??

and whats the problem with the channels except 1 and 11??

taloot

hello guys,,, i really have serious problem here i need so i deas help tests,, here is my network i have RB112 with 1 SR2 card transmitting @ 26db connected throw u.fl connector which is port -b noise floor -102 and 15db hyperlink pro omni directional the problems that i have: 1 i just can ues chann...

taloot

update your version once its update your version to 2.9.40 its more stable and relable than the 2.9.27

taloot

on RP112
i got 100% cpu usage alot
missing wireless interface on reboot

on x86

after a 3 min of using with hotspot the router stop responding
no ping nothing

taloot

8602 shouldnt be supported by mikrotik anymore
the worst mini-pci in the world and ever be made
no support from there side @ all

SENAO they should care about wireless phones and dont play with wlan's

taloot

NMP-8602 / Senao Atheros High Power 26dbm (( dont think about it the worest card ever i tried very veyr veyr veery very very very bad cardddd)) i think in your case the AMP is the best example : we are doing small village with 1 watt amp with regular AP (hyperlink omni 15 db) client is connected and...

taloot

how this could be done? i didnt find any documents or anthing i have my user on hotspot now i would like to active the usermanger i download it i install it i create parent account for me i access http://my router ip/userman i accessed the the web interface (( using my external ip address the 10.5.5...

taloot

i want to make a DMZ on mikrotik and my ips is dynamic so i have to fix them manully every time
is there a scrip that let them change the ip on Nat automaticlly

taloot

serious??
absolutely

technicly not possable?

taloot

is there anyway to mangel the pptp connection which is made from router to 82.198.6.19 and add it as routinh mark??

it seems that its not possable to mark somthing that make the connection from the router ( from client on lan to wan its ok) but from router to internet

taloot

serious??

taloot

hi guys 1st of all i have router with 4 ethernet ports ...... OK Port1 = LAN Port2 = DVB-s router Port3= ADSL router ok lets start from begining i using ADSL + satllite one-way (which is coming throw port2) the satllite ISP need PPTP to connected to his server i was working gr8 and i was very happy ...

taloot

taloot

want to be feeel ok and confot?? 1st change the AP to standalone AP (viewing signal clients and all those info didnt help so lets get rid of it) trust me u will be more more more than staicsfy you will feel that you are free and u have to hangout becouse you dont have anything to do Sorry mikrotik y...

taloot

ok this time it will be hard script here its my problem i have pptp with dynamic ip and i want to make a dmz host for the mail server the problem that mikrotik seems doesnt support DMZ with dynamic ip i have to inter the ip manully i want a script the on UP (using netrwatch) i want to to change the ...

taloot

gr8 work

taloot

good but sometimes even if i reconnect doesnt work so the netwatch will still down status

i want the script to keep trying untill the status become up

is there break command in the scripting

taloot

hi guys this is my first time doing scripting i m totally new on it my pptp connection hanging every 3-5 hours i have to disconnect then reconnect the then it works from 1 year i m keep doing those clicks dayily is there a automized script could fix this?? 1st pinging the main pptp gateway (server i...

taloot

whats ur mpci? vonder

taloot

following

the atheros card is crazy on windows very very good performance compare to intel cards, so i think just some foucus from mikrotik guys on it it will be better than windows its time only

taloot

there is a prism mini-pci its very new chipset but i think its not supported by mikrotik its called Intersil (Prism Duette ISL3890) didnt try it on windows but i have friend of mine working in big factory in taiwan he said that prism is better in 11b and atheros better 11g so i dont know i would lik...

taloot

from my experinces with atheros cards,
there is many many windows version for the driver many bugs the fixing
XR
i was having my pc being restarted the atheros drivers updated usually for windows

taloot

sorry MT fainly i found the problem from where it comes NMP-8602 <---------- its the problem creator when using wireless package the max TX power is 23 db but when i ues the legacy it goes for 26 db test done on p2p link 5 km distance with 18db yagi antennas bothsides now i m having 5ms to 10ms stab...

taloot

im using card smilar to R52 ( or u can say its exactly the same) works more than perfect like up as access point being up stable @ 6ms pinging heat have 0 % effect on the preformance even on the day time i m getting 2 db more

taloot

my sagguestion as tester,
its not worth taking risk to ues senao go for the SR2 its better or SR5
very proffsional company, unless mikrotik stamp on it as approvde hardware always ues what mikrotik says

taloot

why dont you set it up as AP

taloot

its very good to hear that?
anyone using R52 could please give me the following info?
CHIP info my 200mw AR5006
mac:0xa/0x5, phy:0x61, a5:0x63, a2:0x0, eeprom:0x5003
senao chip info
mac:0xa/0x4, phy:0x61, a5:0x63, a2:0x0, eeprom:0x5002

taloot

i have MT hotspot enabled some of my client want to access there companies vpn

how can i do port forward for them please dont provide me the manaul

i want it to be dont step by step
thanks in advance

taloot

hello wild thanks for your rich reply,
will provide you the exact info once i installed cm9 card
really big thank tto you

taloot

i hope so wildbil now also i m about to buy R52 mini-pci just to make sure btw all ppl say mis confige mis confige what do you mean is it nuclear bomb to make???? just as regular access point or even easier,, ok to be honst i didnt try thr cm9 and the r52,,, come on guys i test it into indoor envirm...

taloot

ok what do you prefer guys cm9 or r52 to test

taloot

Mikrotik Game over.. contunie YES I no........ no after lossing 6 of my clients when i start using mikrotik and atheros card fainlly i decide to reinstall my old AP with 1 watt amp to be honst mikrotik is good as p2p with nstreme enabled but to make it function as regular ap its not good as i think ...

taloot

frequncy mode what is it manual TX?? or regularty domain>???

taloot

current-tx-powers: 1Mbps:30,2Mbps:30,5.5Mbps:30,11Mbps:30

taloot

how could i monitor

taloot

i hope so

i m using RB112 also regular pc
for the cables i buy it from mikrotik and i have cables from japaness company all the same
Chipset i ues 5004 <-- pci and i did ues AR5006x mini-pci senao and sparklan

the client
i try many client even mikrotik as station WDS

taloot

very high ping rate compare to regular access point regular 2 ms to 5 ms MT getting 50ms to 500ms too many disconnection for the clients using laptop ((its been much much reduced in the latest version of MT)) signal not accurate from client side MT both sides i m getting -92 signal as i test its con...

taloot

have anyone try this,,,,, i m running the NMP-8602 @794mw 29db higher signal on client side i did a test yesterday MT AP (RB/112) 2 mini-pci 1x 8602 and 1xaircord 85 + 15db omni directional senao is 400mw aircord is 100mw the test done @ 11b laptop toshiba with netstumbler on it far as 600m we was k...

taloot

Alessio ,, we are still waiting for your comments to make MTos the bessssssssst every one must tell about general problems and improvment

i dont know why there is no compression support for the 8602 senao?

taloot

any follow?

taloot

thanks proxy but this is basic info about amps, normally its craaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaab thank god for the high power boards technology btw i have more than 60 sites with amplifire setup it works ok but,,,,,,,,,,,,,, 14 month the amp is dead so let say whats bad about amp,,, 1. expansive 2. ...

taloot

as normunds say fainly i say amplifire is totally uesless crab
did a test using 100mw board @ 24mbps working great TX @11-11.5 mbps RX same
i instaled amp 1000mw support Turbo mode as they said ,,, i got higer signal but higer nooise flooor and muc much lower speed arround 12mbps TX=6mbps = RX= 6mbps

taloot

i have an AP it has 0% ccq? no client can see or connect to this AP is that mean the mpci modeule defeact??

taloot

ok guys what about 0% i have one AP it has 0% and no client can connect to it is that means the mpci module is not working ?? or mybe its cabling antenna issue ??please help me on this

taloot

i agree 100% with you but see is better than hear this is what i noticed try guys and lets share i have carrs vnp-8602 and another aircord branded mini-pci its rated as 20db power now running with me @ 25db with coooool performance on 11b will provide you screen shoot with 57 client connected to sen...

taloot

i know ice,
no i test all the cases card rate manul TX all rate fixed
2.9.23 is diffrent

yeah right it didnt mention that in change log

taloot

from my test when you want to access throw mac address dont assigne ip address for your machine

taloot

whats the problem???? signal ??
if its signal issue i think ;;25 foot cable ;;; is too much for 5ghz frequancy whats the type of your cable?

taloot

hi all guys ,
just test the new version of MT 2.9.23 those guys do somthing with the 5006 chipset i noticed biiiig really big diffrent in wirless performance and TX power i push normal card to 500MW and working perfect so far pinging become very stable i dont know why
just dont miss it guys

taloot

you have to setup ip address in both AP's Wlan interface the make ping or just do the following

make brige LAN and WLAN
in both router
then your hole link will be acking like cable

taloot

UPdate#1:
the problem has been fixed ,,,, why??
becouse i was brige LAN and Vlan togather,

taloot

exactly when using brige and vlan
i access throw telnet and just delet and disable some entries then every think going OK

taloot

hello
i enable vlan between my main router and RB112" access point"
i faced big problem the pinging become not stable is it configuration issue?
many time out

taloot

please anyone could tell me anything is it bug??

taloot

whats the version of OS you are running? for me i test 2.9.19 and 2.9.22 big diffrent .22 its better in wirless performance, but it has some 100% load of CPU, but in my opionion MT need a littel bit improvment in the Wlan, always ues MT supported brand name and chipset like there R52' i didnt test i...

taloot

using rstp to brige ether1 to wlan1 there is many option what is the best options should i yes in this some of my client who is using CPE there machine doesnt take ips unless they do clone MAC in the client side, is it possable to bypass this problem,,,, when i m using regular AP it works with them ...

taloot

thats what i did

taloot

interface ethernet set ether1 name="ether1" mtu=1500 mac-address=00:0C:42:08:05:8C arp=enabled \ disable-running-check=yes auto-negotiation=yes full-duplex=yes \ cable-settings=default speed=100Mbps comment="" disabled=no / interface wireless set TEST name="TEST" mtu=15...

taloot

no answers??

taloot

i have client station wds
signal is -88/-84 SNR about 17
ping time is high

150msec - 900msec
no compression no nstreme
both of them atheros 5006
any idea guys?

taloot

once i open winbox for my router i m facing tooo much window opend, even if i clear the winbox cache, even using another computer, how can i resolve this problem my winbox crash when i try to open this router but other routers work great with the same winbox i m using RB/112 quckly answer will help ...

taloot

is mikrotik support this future??
i read some artical about it that it help very much in outdoor envirment
anyone have info lets share

taloot

MT1 and MT2
MT1 = Ap brige + wds MT2 Ap brige +wds
is this right,
i m currently running wds clients and i have my WDS brige but i m asking about the WDS AP-to AP connection

taloot

how can i make it?

taloot

hello,
is it poassable to connect AP to AP so like normal WDS -repeater??
thanks

taloot

i did it but still using the last ip address
what should be placed with In ddns-host the default is *1

taloot

thanks alot sam, but i uesd to have problems with my mail provider even with MT, so i think i should post it here, so all ppl take benfit of this, i apply for dns not ddns in your site and its free, do you have free DDns or i have to buy one the currently one i have i think i have to LOCKED ip to th...

taloot

i did signup for changeip.com but i have some problems and there support didnt reply to me " whats should be placed in address?? can any one give me hint on how to ues it? i already check this http://www.mikrotik.com/docs/ros/2.9/tools/ddns i need some help my ip is been change every day from m...

taloot

its not a joke u have to understand what i mean 1st
i sent e-mail for them to buy the SR9 a, waiting for the reply

taloot

another word guys, can i install it from car to car?

taloot

i will but i m looking for estimation
example i have link @ 6mbps arround 12km @ 2.4ghz 200mw 20db antenna both sides
if i replace it with the 900mhz 700mw whats the expected speed i will got? if we consider my antenna is somthing like 15 db

taloot

ok in case of blocked fesantal zone 50% only

taloot

ok regarding the senao i test it it doesnt support compression noise floor higher than regular mpci (-97) <--senao ,regular 200mw a/b/g <----(-104) very low power the senao low heat compare to SR2 senao has A/B/G senao doesnt have stable output 25-26 dbm senstvity -96 i m using it (using senao)on 2 ...

taloot

i m really want to know the range of the 900mhz NLOS, how many KM we expect if its NLOS, please plece your post guys

taloot

fainly i changed my 1 wat pcb amp with 200mw high power minipci,
now i m sure normunds is 100% right
i have omni direction 15 db i noticed BIIIIIIG diffrent the 200mw is lower signal in client side , BUT more stable and all links works more than great,
Big thanks for MT

taloot

can you explane more
you have RB or rgular pc? if RB
i try 12v 2.5AMP then i switch to 48 v 350mah 48v is more stable

taloot

AR5006 works fine with MT i think urs should work

taloot

push N i think its not hard, isnt it?

taloot · me2 upgrade it to 2.9.19 i had littel system improvment

me2 upgrade it to 2.9.19 i had littel system improvment

taloot

update # 3
the senao card doesnt support compression any idea guys??
also it have more noise floor than regular cards
i m getting -101 in aircord and -96 to -98 on senao exactly the same location and same routerboard also same pci slot
is it not supported by MT??

taloot

update #2

2ghz-5mhz and 10 mhz works between both aircord and senao mini-pci
5ghz-5mhz and 10 mhz not working between those 2 cards
aircord frequancy range 5120-58XX the senao 5180-58XX

taloot

new info,, guys
the 2ghz-5mhz doesnt work with Amps @ all

taloot

regarding how to incress the output power
for me it works as follow
i choose my country
i also chose munal tx power
then u should ues Card rate to 26 u will see big diffrents but normally it takes arround 10 secounds in senao to noticed the diffrent in the client

taloot

http://forum.mikrotik.com/viewtopic.php?t=7680
here u should post your question so we can have full recognized forum

taloot

Are you going to move the RB's up to the antenna or will you still use the 25m LMR400?

/Jörgen

hahaha sure you are kidding
i will give it to my friend he like to ues kenwood 2 way radio

i already desgin my own outdoor box i will post it here later on

taloot

yes totally its gone, are you using 915 chipset

taloot

hi guys,
i m trying to make load balance in the 2 gateways i did
http://forum.mikrotik.com/posting.php?mode=newtopic&f=2
my mt is hotspot enabled
once i add another gateway the internet totally stopped from my clients
any idea guys,
i have been trying on this for 6 months but no one help me on it

taloot

actully this happend to me when i m using 915 intel chipset

taloot

i have 2 mpci senao 400mw and 2 mpci aircord 200mw both of them a/b/g i installed them in two RB112 with aircord Power injector 48v also pigtai as i see people over here always asking about heat and power problems i think in my case the power was very very stable i keep the board running all the nig...

taloot

Just set you modem to bridged PPPoA as per http://forum.mikrotik.com/viewtopic.php ... ight=pppoa.

It works for me using a normal Linksys modem.

Tim

whats your modem model numbeer

taloot

good work really this should be printed as info

just got 2 RB112 and senao 400mw a/b/g i will built my new link
will give you the result with in one day guys

anyone have question about this hardware please dont histate to post your question

taloot

yes sergejs, 1st question yes i did and i sent for you the supout 2nd question i have only one router + AP on it and wds station on the another side but i cant access the remote AP"which is wds staion" only when using mac telnet ip neighbor <--- in this one only i can ping MAC and telnet M...

taloot

hahaha guys you are trying to turn the mikrotik to 1 gigs byte opreating system
its routerOS not windows

taloot

yes, do not use amps in this situation. you can go up to 50-70km with cm9 and no amps.

really????
65mw only can make 50km???

taloot

i have MTbox in both sides cm9 also bothe sides 1 watt amp with 25meter of LMR-400 both sides 18 dbi yagi antenna bothe sides signal -71/-70 without nstreme the links goes ON OF ON OF connect for 2 sec then disconnect after 2 min the link become up, But the ping is 200ms-500ms once i enable the nstr...

taloot

taloot

adding an adsl support will be crazy option if you include teaming connection for 2 interface

taloot

it has been added but i cant find log files on MT Disk
files print
it shows me only my backup files

taloot

hi there,
can i save the log of wirless, web-proxy, system and hotspot
in the MT harddisk

taloot

good question,
i think this option works only when use MT in both sides,am i right?
i saw its 2GHZ-5mhz is that mean the frequancy is 2.4ghz or 2 ghz?
another think is it supported by the amplifires<...' or it has nothing to do '?
best regards
talot

taloot

good question,
i think this option works only when use MT in both sides,am i right?
i saw its 2GHZ-5mhz is that mean the frequancy is 2.4ghz or 2 ghz?
another think is it supported by the amplifires<...' or it has nothing to do '?
best regards
talot

taloot

so all of has having the same problem
but for me i want it to be like this so i can access all my MT access point throw winbox

taloot

multiple interface on one hotspot server, is it possable i tried many many times but it didnt works?
i cannot find any decumntation that could help me?
try to help me gys waiting for your answers

taloot

still... waiting for answer guys

taloot

ok,
i have 2 interface one is LAN the second is WLAN
i want them to run in the same hotspot server, HOW??
step by step guys

taloot

you need to configure the virtual access point IP-address and DHCP becouse it have diffrent network that the real adapter
"" as you configure a new interface""

taloot

me also i have -98 to -99 is that good or bad?
im using AMP 1 watt is that have effect on noise?

taloot

relax guys its not working i do a search 6 months ago fianly i become tired of it

taloot

the new senao its about 400mah and the SR2 1400mah I WILL RECIVE MY SENAO 2MORO I WILL TEST AND SEE

taloot

If the hotspot is blocking the remotes traffic you can creat a tunnel from the local AP lan side to the remote AP lan side.....
how can i do it??

taloot

thanks for your reply as i told you it will act only as AP taking from LAN and brige it to wirless

taloot

hi all,
we just going to order the RB-112 and i want to ues it as access point
JUST access point with senao 400mw board
do you think guys i will get good perfomance '' no nstreme will be enabled'
DFS ack time out <--- only those function will be uesd
any recommendation or advacer?

taloot

guys, i have an AP-brige(dynamic WDS) <--jober tech me this, big thanks to him so from beging (AP-brige-WDS dynamic)------->7.4km <-------(station WDS) the main point it has the hole thinks "hotspot, AP etc the secondry one just acting as AP-client 1.How can i make the station WDS to act as rep...

taloot

how come,
u e-mail me yesterday normunds right?

taloot

i want routerboard i contact the sales twice but no one responde to me,
what can i do in this case?? ""Support me""

taloot

im using latest versions always 2.9.17 man today i just ues mikrotik AP its unbelivable compare to regulare access points jober i want to create like WDS like whats the steps i have the main router having all the hotspot routing proxy etc.... it has AP based on atheros AR5213 200mw it has only the a...

taloot

ok can u jober tell me how can i setup the brige step by step if u dont mind

taloot

i want to know hoe to setup a CPE (CPE only) that takes from wireless and brige it to the LAN
also

i want to know how to make a AP that takes from LAN then brige it to the AP(like normal AP)

thanks guys

Search found 276 matches