Community discussions

MUM Europe 2020

Search found 143 matches

by t3rm
Wed Mar 30, 2011 7:12 pm
Forum: Wireless Networking
Topic: Our SXT testing
Replies: 15
Views: 2827

Re: Our SXT testing

@t3rm... yes 75 + 75Mbps. And a little update, our friends managed to achieve ~98 + ~98Mbps link on 500m distance. @MT Staff: When will SXT get CE? Yes, this afternoon, local Mikrotik Forum posted that SXT able to punch 90Mbps full duplex packets, My mistake is testing this on old laptop. Will test...
by t3rm
Wed Mar 30, 2011 7:09 pm
Forum: Wireless Networking
Topic: RBSXT with Huawei EC167 CDMA EVDO modem works perfectly
Replies: 4
Views: 2146

Re: RBSXT with Huawei EC167 CDMA EVDO modem works perfectly

This one? http://modem-techno.blogspot.com/2010/07/huawei-ec-167-cdma-usb-modem-2000-1x.html did it fit inside the SXT just fine? perfect! thanks for sharing Yup, thats the modem i meant. Future plan, i will test it to combine their cell network and my 802.11n network .. :p Modem should be placed o...
by t3rm
Wed Mar 30, 2011 1:59 am
Forum: Wireless Networking
Topic: SXT - Speed Issue
Replies: 6
Views: 1512

Re: SXT - Speed Issue

Can you provide your settings to achieve the 150/150 rates? I'd very much like to duplicate this issue. Please be as specific as possible (what protocol your using, etc.). ... and what interface are you programing your SXTs with (Winbox, ssh, etc)? Thanks! i doubt so much to get TCP data transfer 1...
by t3rm
Wed Mar 30, 2011 1:42 am
Forum: Wireless Networking
Topic: RBSXT with Huawei EC167 CDMA EVDO modem works perfectly
Replies: 4
Views: 2146

RBSXT with Huawei EC167 CDMA EVDO modem works perfectly

Local provider, namely AHA (www.aha.co.id) in Indonesia provide Internet Access by using this Huawei EC167 modem EVDO 3.1Mbps max data throughput. I tried on RBSXT, it works :)) So, RBSXT have backup connection link using CDMA EVDO. he he he he .. - Rio.Martin - http://a6.sphotos.ak.fbcdn.net/hphoto...
by t3rm
Wed Mar 30, 2011 1:27 am
Forum: Wireless Networking
Topic: RB-SXT real tcp throughput data / picture
Replies: 10
Views: 6023

RB-SXT real tcp throughput data / picture

Dear all, I need someone else data for RB-SXT real TCP throughput. What i have done: NotebookPC (Acer Aspire 3680) ---- RBSXT.Client ---------------------- RBSXT.AP---- NotebookPC (Acer Aspire 4xxx 3 months old) I only got 70 - 80Mbps traffic for tcp test 10 - 20 streams While the interesting part i...
by t3rm
Wed Mar 30, 2011 12:53 am
Forum: Wireless Networking
Topic: RouterBOARD SXT 5HnD ptp bridge mode only passing 40megs tcp
Replies: 26
Views: 19331

Re: RouterBOARD SXT 5HnD ptp bridge mode only passing 40megs

i need to know what is the maximum transfer of tcp data between 2 end-nodes such these topology:


PC ------------Wireless-SXT-Client --------------------WirelessAP--SXT------------PC

From PC to PC,
do SXT able to transfer max 100Mbps real throughput ?
by t3rm
Wed Mar 30, 2011 12:51 am
Forum: Wireless Networking
Topic: SXT - Speed Issue
Replies: 6
Views: 1512

Re: SXT - Speed Issue

The Issue remain constant, Even with a Bandwidth Test running. It will never Unlock over 65Mb with default rates enabled.
factors to recheck:

antenna alligntment on both side
tx power
make sure to choose right "empty" frequency

thats all :))
by t3rm
Wed Mar 16, 2011 4:09 pm
Forum: Wireless Networking
Topic: Our SXT testing
Replies: 15
Views: 2827

Re: Our SXT testing

We managed to achieve stable 150Mbit TCP throughput with 2 SXT connected to 2 computers. We used IPerf with 4 threads. Some of our friends established 200Mbit TCP link on 3 km distance. So far, we're happy with the device. Nice job MT! 150Mbit you mentioned here must be 75Mbit TX and 75Mbit RX righ...
by t3rm
Mon Feb 21, 2011 5:06 am
Forum: Wireless Networking
Topic: RouterBOARD SXT:: what max distance with max thr/put?
Replies: 20
Views: 19569

Re: RouterBOARD SXT:: what max distance with max thr/put?

the last capture after doing several configs in HT,
using nv2

http://forum.mikrotik.com/download/file.php?id=6406
by t3rm
Mon Feb 21, 2011 4:58 am
Forum: Wireless Networking
Topic: 802.11n
Replies: 939
Views: 291272

Re: 802.11n

Capture of RB SXT-5D in action.

224Mbps reached, but too bad this is in UDP test :p
TCP, still testing, which one gone bad, my laptop ethernet or SXT ethernet.
Cause i only able to transfer 60Mbps full duplex
Screenshot-3.png
by t3rm
Sun Feb 20, 2011 12:15 pm
Forum: Wireless Networking
Topic: RouterBOARD SXT:: what max distance with max thr/put?
Replies: 20
Views: 19569

Re: RouterBOARD SXT:: what max distance with max thr/put?

am testing the antenna 5 meters away and adjust the tx power to made -65dbm reading on both side

i Got 190Mbps half duplex and 92Mbps full duplex
but those in UDP, i havent test TCP yet ..
by t3rm
Wed Jun 23, 2010 11:31 pm
Forum: General
Topic: RouterOS-4.10 successfully rushed everything ... :p
Replies: 2
Views: 760

Re: RouterOS-4.10 successfully rushed everything ... :p

Problem solved.
Its really buggy.
i have to restart, re-enabled and disabled all PPTP interface,
must enabled OVPN first than PPTP,

and now it worked ....

- Rio.Martin -
by t3rm
Wed Jun 23, 2010 11:26 pm
Forum: General
Topic: Routing public IPs from 2 Gateways
Replies: 5
Views: 1046

Re: Routing public IPs from 2 Gateways

use the ip > route > rules 1. add dst-addr=178.x.x.x/24 lookup main , add dst-addr=217.117.x.x/24 lookup main 2. add src-addr=178.x.x.x lookup GW1, add src-addr=217.117.x.x lookup GW2 Shouldn't that ^ be other way round, like: 1. add src-addr=178.x.x.x/24 lookup main , add src-addr=217.117.x.x/24 l...
by t3rm
Wed Jun 23, 2010 9:44 pm
Forum: General
Topic: VPN Server with 36 Clients Over Private IP Address
Replies: 13
Views: 1513

Re: VPN Server with 36 Clients Over Private IP Address

Put one router like RB450G or RB1100 in one datacenter where the ip should be able to reach from 36 locations you mentioned. You can use ping to determine where you able to reach or not to your router in datacenter from those 36locations. Be sure to check the VPN you will going to use. Many ISPs blo...
by t3rm
Wed Jun 23, 2010 9:32 pm
Forum: General
Topic: L2TP tunnel
Replies: 4
Views: 741

Re: L2TP tunnel

I think you forgot to made a policy route for 74.168.1.68 router. Must have default gateway for ip 74.168.1.68 to 10.10.1.1 otherwise it wont have any return path to sender packets. And your vpn is not simple :p I made /30 for tunnel and all private network routed outside the vpn ip blocks. That wil...
by t3rm
Wed Jun 23, 2010 9:16 pm
Forum: General
Topic: Routing public IPs from 2 Gateways
Replies: 5
Views: 1046

Re: Routing public IPs from 2 Gateways

use the ip > route > rules 1. add dst-addr=178.x.x.x/24 lookup main , add dst-addr=217.117.x.x/24 lookup main 2. add src-addr=178.x.x.x lookup GW1, add src-addr=217.117.x.x lookup GW2 in ip > route add 0.0.0.0/0 gateway = 178.y.y.y (the gateway of GW1) mark=GW1 add 0.0.0.0/0 gateway = 217.117.y.y (t...
by t3rm
Wed Jun 23, 2010 9:00 pm
Forum: General
Topic: RouterOS-4.10 successfully rushed everything ... :p
Replies: 2
Views: 760

RouterOS-4.10 successfully rushed everything ... :p

I tried today installing RouterOS-4.10 on x86 Intel I had two PPPoE interface running I had one PPTP interface running Adding OVPN successfully made those PPPoE and PPTP stop running and successfully made an error like this: ... OVPN cannot create interface ... Some kind of bug ? Thank you - Rio.Mar...
by t3rm
Sun May 23, 2010 4:29 am
Forum: General
Topic: Lightest VPN for RB450G
Replies: 5
Views: 2099

Re: Lightest VPN for RB450G

Hedele, Thanks. Finally i got 50% reduce from earlier state. CPU usage now only 20 - 30% average. About L2TP getting blocked by my provider, that would be just a business reason i guess. They dont want their cheap bandwidth pricing used improperly for tunnel transport to another provider. Since thei...
by t3rm
Sat May 22, 2010 4:23 pm
Forum: General
Topic: Lightest VPN for RB450G
Replies: 5
Views: 2099

Re: Lightest VPN for RB450G

Hello Hedele,

i drop the encryption on PPTP
i also changed the MTU to 512 instead of 1480

effect so far = reduce CPU Usage 10 - 15 %

I will try to migrate all the PPTP to L2TP if my ISP didnt blocked the protocol.

Thanks
by t3rm
Sat May 22, 2010 5:19 am
Forum: General
Topic: Lightest VPN for RB450G
Replies: 5
Views: 2099

Lightest VPN for RB450G

Folks,

I want to know which VPN should be applied to my RB450G
Right now i have 7PPTP VPN and 5 OVPN with 12 Mbps average bandwidth and 7000pps
CPU Usage 40 - 50 %

I want to reduce this CPU Usage. Please suggest on VPN or other ways to reduce the CPU Usage.

Thank you so much.

- Rio.Martin -
by t3rm
Sun Nov 09, 2008 1:13 pm
Forum: General
Topic: Connection Limit on One Way Connection.
Replies: 6
Views: 3405

Connection Limit on One Way Connection.

Hello all,

I would like to apply connection limit for traffic over DVB i have.
It seemed it didnt worked.
Any solution using conn-limit for one way route ?

Thanks
by t3rm
Sun Jun 22, 2008 8:43 pm
Forum: General
Topic: Bridge to manage VLANs bandwidth.
Replies: 7
Views: 1764

Re: Bridge to manage VLANs bandwidth.

Yup
i got an error

vlan matchers only valid on vlan interface.
Should i add interface vlan with the same id on bridge ?

thanks
by t3rm
Sat Jun 21, 2008 3:32 am
Forum: General
Topic: Bridge to manage VLANs bandwidth.
Replies: 7
Views: 1764

Bridge to manage VLANs bandwidth.

Dear all,

I have this situation on my network:

INTERNET --- MT-Router ==== X ====== Cisco-Catalyst --- UsersPC


From MT Router to Cisco Catalyst, many VLANs already established.
Can i place mikrotik bridge on the X to manage the bandwidth over many VLANs in there?

Thanks
by t3rm
Sun Apr 20, 2008 7:31 pm
Forum: General
Topic: MUM INDONESIA!
Replies: 23
Views: 8314

Re: MUM in India (April) and USA (May) and now INDONESIA too!

So when the MUM in Indonesia ??
8)
by t3rm
Thu Apr 10, 2008 5:54 am
Forum: Wireless Networking
Topic: small Bandwidth
Replies: 4
Views: 969

Re: small Bandwidth

Possible cause:

1. Speed rates to high, lower it.
2. Try to disable the nstreme.
3. Give the results of ping test.
by t3rm
Tue Apr 08, 2008 2:30 pm
Forum: General
Topic: Bonding PPTP Client Tunnel , how ?
Replies: 1
Views: 899

Bonding PPTP Client Tunnel , how ?

Dear all,

I am having difficulties on bonding two PPTP Client Tunnel. It seemed bonding didint recognize tunneling interface.
Need help.
Thanks b4.
by t3rm
Wed Mar 05, 2008 7:27 pm
Forum: Wireless Networking
Topic: How do i know a 600mW mini pci card
Replies: 13
Views: 2440

Re: How do i know a 600mW mini pci card

Noted the mac address, because you 'll find out what miniPCI is that from its mac address.


8)
by t3rm
Wed Feb 27, 2008 5:10 pm
Forum: General
Topic: Mikrotik BGP vs. Cisco vs. OPenBGPD etc.
Replies: 1
Views: 1449

Re: Mikrotik BGP vs. Cisco vs. OPenBGPD etc.

I have no problem connecting various routers running ROS v2.9.27, v3.3 with BGP enabled to communicate with Zebra, Quagga, Cisco.
:lol:
by t3rm
Mon Jan 21, 2008 6:23 pm
Forum: Wireless Networking
Topic: Bad signal on 5.7 - 5.8 Ghz frequency.
Replies: 5
Views: 1255

Re: Bad signal on 5.7 - 5.8 Ghz frequency.

jwcn:

nice, you must be suspicious with the antenna right ? :lol: :lol:
the antenna is Hyperlink, but not so sure the working frequency.
by t3rm
Sun Jan 20, 2008 3:08 pm
Forum: General
Topic: LinkStar and iDirect in MiKroTik
Replies: 7
Views: 1314

Re: LinkStar and iDirect in MiKroTik

Asymetric Route,
this usually use on DVB Downstream Only Internet Access.

The ip address must be set to go to other interface different from the way its coming.
In other words, the packets not going back to interface DVB.
by t3rm
Sun Jan 20, 2008 9:49 am
Forum: Wireless Networking
Topic: Bad signal on 5.7 - 5.8 Ghz frequency.
Replies: 5
Views: 1255

Re: Bad signal on 5.7 - 5.8 Ghz frequency.

Tested using Alvarion and Motorola Canopy,
freq 5.7 - 5.8 Ghz also poor signal receiption.
So i guess this channel are fully use by Trango Broadband Wireless.

Anyone would like to share any solution to handle this situation against Trango ?
Thanks
by t3rm
Fri Jan 18, 2008 8:39 pm
Forum: Wireless Networking
Topic: Bad signal on 5.7 - 5.8 Ghz frequency.
Replies: 5
Views: 1255

Bad signal on 5.7 - 5.8 Ghz frequency.

Dear all, I have bad signal receive on my RB112 - R52 for 5.7Ghz - 5.8Ghz. Both side using the same RB112 - R52 Its pretty weird, because i scanned the frequency, its showing empty SSID. But the signal is bad, since the antenna i'm using is 5.1 - 5.9 Ghz, when i set the AP to 5.1Ghz, i scanned 5.1 G...
by t3rm
Fri Jan 18, 2008 7:45 pm
Forum: General
Topic: LinkStar and iDirect in MiKroTik
Replies: 7
Views: 1314

Re: LinkStar and iDirect in MiKroTik

I think Ahmed is not asking about load balancing.
He asked whether any option to do uplink data via upstream interface on iDirect and make downstream in Linkstart interface.

I think the solution is simple, asymetric route.
by t3rm
Fri Jan 18, 2008 7:32 pm
Forum: Wireless Networking
Topic: Link CCQ quality problem
Replies: 5
Views: 1284

Re: Link CCQ quality problem

Gcera:

Use horisontal polarization.
Make sure you tilt those two antennas @ side A and side B correctly.
by t3rm
Thu Jan 10, 2008 5:58 pm
Forum: General
Topic: LinkStar and iDirect in MiKroTik
Replies: 7
Views: 1314

Re: LinkStar and iDirect in MiKroTik

So whats wrong with going up with different interface than the interface use for downstream ?
Or perhaps it wont work on Linkstar, just as i heard from many people mentioning that with Linkstar we must set the traffic to come back from the same interface ?


:shock: :shock:
by t3rm
Thu Jan 03, 2008 11:48 am
Forum: Wireless Networking
Topic: Backhaul with 2x RIC/522 with RB333/R52H - poor bandwidth
Replies: 3
Views: 1021

Re: Backhaul with 2x RIC/522 with RB333/R52H - poor bandwidth

Please try it on your RB333-R52H
When the turbo on, that really happened to my site.
Nstreme only works for non turbo, but it just boost you 1 - 2Mbps higher, not much.

CMIIW
by t3rm
Thu Jan 03, 2008 12:01 am
Forum: Wireless Networking
Topic: Backhaul with 2x RIC/522 with RB333/R52H - poor bandwidth
Replies: 3
Views: 1021

Re: Backhaul with 2x RIC/522 with RB333/R52H - poor bandwidth

I just did test RB333 - R52H with Nstreme, the throughput dropped.
Try the compression without Nstreme.
Also try to set the TX Power carefully, because 1dbm really mean much for me.

8)
by t3rm
Wed Jan 02, 2008 11:55 pm
Forum: Wireless Networking
Topic: How much "Nstreme" you got ?
Replies: 9
Views: 6220

How much "Nstreme" you got ?

Dear all, Nstreme, lots of thread in here speaking of the way and how good Nstreme works. But i didnt or even cant see the benefits of the Nstreme use. 1. It only burst a little more bandwidth. Please share how much you got, i only have 1 - 2 Mbps more when i activate Nstreme. 2. What is the configu...
by t3rm
Wed Jan 02, 2008 11:47 pm
Forum: Wireless Networking
Topic: Nstreme Problems!
Replies: 19
Views: 2653

Re: Nstreme Problems!

Andre: Try to lower the TX Power. I have the same problem like you on my RB333 - R52H But personally i prefer not to use Nstreme because it only able to burst a little much bandwidth, (only around 1-2Mbps higher) but you sacrifice the latency lots. The latency i have in here change from 1 - 2 ms int...
by t3rm
Sat Dec 29, 2007 8:20 pm
Forum: Wireless Networking
Topic: Help needed for setting up 2GHz-10Mhz / 5 MHz mode
Replies: 6
Views: 1300

Re: Help needed for setting up 2GHz-10Mhz / 5 MHz mode

Please check the miniPCI.
As far as i knew, R52, R52H, NMP8602 support to use 5Mhz spacing and 10Mhz spacing.
Perhaps the miniPCI didnt support it.
by t3rm
Sat Dec 29, 2007 12:20 pm
Forum: General
Topic: Router with two uplinks in the same subnet
Replies: 8
Views: 1711

Re: Router with two uplinks in the same subnet

put a router behind your modem and before your main router. then you have 2 different ip from different subnet

Thats the way of ROS v2.x
V3.x , no need man ..

:lol: :lol:
by t3rm
Sat Dec 29, 2007 12:14 pm
Forum: Wireless Networking
Topic: Nstreme Problems!
Replies: 19
Views: 2653

Re: Nstreme Problems!

It'll be better to post the Status of Wireless
RX/TX Signal, CCQ, etc ..

I guess Andre coming from the same country as me.
So perhaps he had interference the same like i do .. 8)
by t3rm
Sat Dec 29, 2007 12:11 pm
Forum: Wireless Networking
Topic: Help needed for setting up 2GHz-10Mhz / 5 MHz mode
Replies: 6
Views: 1300

Re: Help needed for setting up 2GHz-10Mhz / 5 MHz mode

Go to Status
and post what shown on it.
RX/TX Signal , CCQ, and others..

8)
by t3rm
Fri Dec 28, 2007 8:17 pm
Forum: General
Topic: Router with two uplinks in the same subnet
Replies: 8
Views: 1711

Re: Router with two uplinks in the same subnet

Interface Routing is the solution.
I ve done it using two local ADSL Provider in my country.

8)
by t3rm
Fri Dec 28, 2007 8:14 pm
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

Thanks for all.

After all the explanation from above.
Finally i have a solution for this thread. Thats true, using interface routing.
Too bad, this is not worked under v2.9

:(
by t3rm
Wed Dec 26, 2007 6:32 am
Forum: Wireless Networking
Topic: Unstable signal ...
Replies: 7
Views: 1635

Re: Unstable signal ...

Agree, CCQ must be at least 80% for you to make it stable for connection.
8)
by t3rm
Mon Dec 24, 2007 7:11 am
Forum: Wireless Networking
Topic: how to get 54mbps
Replies: 16
Views: 3227

Re: how to get 54mbps

Nice borris.
I'm also using ROS 3.0RC13.
Still trying 30Mbps to reach your record .. he he he .. :lol:
by t3rm
Mon Dec 24, 2007 7:07 am
Forum: Wireless Networking
Topic: RB333 @ 30Mbits over 5.5km
Replies: 7
Views: 1342

Re: RB333 @ 30Mbits over 5.5km

Cables are okay. Antenna i doubt. Because i didnt knew the exact range frequency.
I just told by my wlan vendor that my antenna able to use from 4.9Ghz to 6Ghz.

Signal db is not much different from 5.2 - 6Ghz

Thanks.
by t3rm
Mon Dec 24, 2007 7:05 am
Forum: Wireless Networking
Topic: Signals...
Replies: 1
Views: 680

Re: Signals...

Check Neighbours SSID at both side.
Are you alone ? i'm affraid not ..

:lol: :lol:
by t3rm
Sat Dec 22, 2007 11:09 am
Forum: Wireless Networking
Topic: RB333 @ 30Mbits over 5.5km
Replies: 7
Views: 1342

Re: RB333 @ 30Mbits over 5.5km

Gerard, Thank you so much for your hint on Nstreme. Thats what i need, because those are still without Nstreme Active. I'm confuse with the Framer setting also. Did test the Nstreme with Framer Best Fit 3200, enabling poling with enabling the option "Disable CSMA" and the result is just the same. No...
by t3rm
Sat Dec 22, 2007 5:50 am
Forum: Wireless Networking
Topic: how to get 54mbps
Replies: 16
Views: 3227

Re: how to get 54mbps

remember that this is a mikrotik product forum ... Dont worry Normis. I'll beat the record just in a few days. Look at my RB333 Maximum Performance Thread. I already have 30Mbps maximum with signal -81db. As soon as i have time to repointing both side, i'll get better signal and hopefully i'll get ...
by t3rm
Sat Dec 22, 2007 1:38 am
Forum: Wireless Networking
Topic: RB333 @ 30Mbits over 5.5km
Replies: 7
Views: 1342

RB333 @ 30Mbits over 5.5km

Dear all, I have search all the way down to the forum, but cant find any thread related to RB333 Performance. Just tested on my existing link and here are the results: Wireless Status @ Station: http://img218.imageshack.us/img218/6209/dgrdstatusfj4.th.jpg Upstream Test: http://img218.imageshack.us/i...
by t3rm
Fri Dec 21, 2007 7:54 pm
Forum: General
Topic: Router with two uplinks in the same subnet
Replies: 8
Views: 1711

Re: Router with two uplinks in the same subnet

Sergejs: I have two line of ADSL Provider in Indonesia. They served PPPoE for their clients. PPPoE is point to point right? I have try it already and it wont work. The problem is not the routing for default gateway. I have try to disable the default routing on the PPPoE client so the server dont ass...
by t3rm
Fri Dec 21, 2007 12:01 pm
Forum: Wireless Networking
Topic: RB333-R52H vs RB112-NMP8602
Replies: 5
Views: 1748

Re: RB333-R52H vs RB112-NMP8602

RB333-R52H at both side.

The result is poor.
Only able to reach max 13Mbps.
The test scenario is the same. Tested on side where RB112 replaced with RB333.

Its time going back to NMP again

8)
by t3rm
Wed Dec 19, 2007 6:10 am
Forum: Wireless Networking
Topic: RB333-R52H vs RB112-NMP8602
Replies: 5
Views: 1748

Re: RB333-R52H vs RB112-NMP8602

Thanks, I'll try to test RB333-R52 for both side this afternoon. But i'm still curious, because the test i did @ RB112 side only. Tested by doing sending and receive. CPU utilize @ RB112 always reach 100% all the time i did the test, i think it will be to hard to send packets to RB333 as much as 15....
by t3rm
Tue Dec 18, 2007 9:44 pm
Forum: Wireless Networking
Topic: RB333-R52H vs RB112-NMP8602
Replies: 5
Views: 1748

RB333-R52H vs RB112-NMP8602

Dear all, Just linked up two sites with 5.5km distances between two of them. Site A using RB333 with R52H Site B using RB112 with NMP8602 Throughput test: RB333-R52H only able to get 13.8Mbps RB112-NMP8602 able to get 15.1Mbps Consider the RB333 with R52H is higher spec than RB112-NMP8602, it suppos...
by t3rm
Mon Dec 10, 2007 3:10 pm
Forum: General
Topic: PROXY SERVER using Load Balancing over Multiple Gateways
Replies: 10
Views: 2298

Re: PROXY SERVER using Load Balancing over Multiple Gateways

can you explain more? you saying to have external proxy i like the idea but i will need help with the routing settings maybe i can use (ipcop with advanced proxy it come with Update Accelerator for windows updates) lets work on it if its possible. Yes, the external proxy would be Squid under Linux ...
by t3rm
Mon Dec 10, 2007 3:09 pm
Forum: General
Topic: Load Balancing Screenshot (2 Line of Local Indonesian ADSL)
Replies: 23
Views: 5460

Re: Load Balancing Screenshot (2 Line of Local Indonesian ADSL)

Why everybody wants config ?
Isnt it written clearly on the Mikrotik Docs ?

:shock:


Just be patient, i'm going to test it over another provider.
8)
by t3rm
Sat Dec 08, 2007 9:42 am
Forum: General
Topic: Load Balancing Screenshot (2 Line of Local Indonesian ADSL)
Replies: 23
Views: 5460

Re: Load Balancing Screenshot (2 Line of Local Indonesian ADSL)

MRTG as all request .. :lol:

Load-balance-MRTGSPEEDY.jpg
by t3rm
Thu Dec 06, 2007 11:42 am
Forum: General
Topic: Load Balancing Screenshot (2 Line of Local Indonesian ADSL)
Replies: 23
Views: 5460

Load Balancing Screenshot (2 Line of Local Indonesian ADSL)

Load-balance-SPEEDY.jpg
Next things to do, add 10 more lines ..
Nice huh.

:lol: :lol:

Credit thanks to 'mas Joko Aza'.
Taken on his MT.
by t3rm
Mon Dec 03, 2007 8:43 pm
Forum: General
Topic: PROXY SERVER using Load Balancing over Multiple Gateways
Replies: 10
Views: 2298

Re: PROXY SERVER using Load Balancing over Multiple Gateways

I need to setup the proxy server to use both gateways is it possible? if yes please help
Use Proxy Server outside the mikrotik and make it Mikrotik as default gateway. From Mikrotik, you can have policy route or load balancing over multiple gateway as writen in Mikrotik Docs.
by t3rm
Mon Dec 03, 2007 8:38 pm
Forum: General
Topic: MT behind MT
Replies: 10
Views: 1546

Re: MT behind MT

GWISA, make sure you point to the method how to connect from WinBox to custom port =)
I believe GWISA already have Winbox version 10 released on year 2030 ..

:lol: :lol: :lol:
by t3rm
Thu Nov 29, 2007 9:54 pm
Forum: General
Topic: MT behind MT
Replies: 10
Views: 1546

Re: MT behind MT

Make sure you have two Internet IPs.
One for the first MT, the other for 2nd MT.
create dnat rule for tcp port 8291 goes to 2nd MT ip.

THats all 8)
by t3rm
Tue Nov 27, 2007 7:21 pm
Forum: General
Topic: Policy Routing and OSPF
Replies: 4
Views: 902

Re: Policy Routing and OSPF

ether3 / ISP3 route added by OSPF, not static route.
by t3rm
Tue Nov 27, 2007 10:32 am
Forum: General
Topic: Policy Routing and OSPF
Replies: 4
Views: 902

Re: Policy Routing and OSPF

Anyone please ? :(
by t3rm
Mon Nov 26, 2007 7:53 pm
Forum: General
Topic: How I Can Set ICMP Ping at Same Latency
Replies: 4
Views: 1307

Re: How I Can Set ICMP Ping at Same Latency

Make sure on mangle, you put ICMP on top of the rule you shape for your client.
Or make it the first in line.
by t3rm
Mon Nov 26, 2007 11:59 am
Forum: General
Topic: Policy Routing and OSPF
Replies: 4
Views: 902

Policy Routing and OSPF

Dear all, I'm having trouble to handle this kind of scenario under Mikrotik. Take a look at the attachment i gave. 192.168.0.1 will have default route to ISP-A using IP -> Firewall -> Rules 192.168.0.2 will have default route to ISP-B using IP -> Firewall -> Rules They both applied policy based rout...
by t3rm
Tue Nov 20, 2007 4:03 pm
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

Why would i need routing ?

From 192.168.100.2 or 192.168.100.3 to reach 192.168.100.1 doesnt need routing isnt it ?
Because those are in the same subnet.
by t3rm
Sun Nov 18, 2007 5:07 am
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

uol-vnet & chupaka: Please answer the easiest details i gave on my last post. Or perhaps the network mapping below will make it easier for both of you to understand: MikrotikDUAL.jpg That is the same situation when i subscribe with two line of ADSL from the same provider. Ether1 and Ether2 under the...
by t3rm
Fri Nov 16, 2007 7:42 pm
Forum: General
Topic: >>> [HELP] OSPF + Load Balancing + Fail Over....how ?
Replies: 4
Views: 963

Re: >>> [HELP] OSPF + Load Balancing + Fail Over....how ?

Sure .. why not ?
By using the load-balancing, option check gateway, it should be able to give you the solution you need.

8)
by t3rm
Fri Nov 16, 2007 7:38 pm
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

Chupaka: It seemed you still didnt understand what i meant. My last post, i hope it'll make you easier to imagine the thread we're talking about. Please consider you have the same network 255.255.255.0 for that 3 nodes. If those 3 under the same network, why you suggest to use routing ? CMIIW, routi...
by t3rm
Thu Nov 15, 2007 8:19 pm
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

Janisk: I dont think it might work. How about we set this condition: Mikrotik-PC ether1: 192.168.0.1/24 ether2: 192.168.0.2/24 Monitoring-PC ether1: 192.168.0.3/24 The two PC connected to same switch. The question is, without routing, does Monitoring-PC able to reach ip 192.168.0.1 and 192.168.0.2 ?...
by t3rm
Thu Nov 15, 2007 12:42 pm
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

I already have my Mikrotik v3.0rc9
But i cant find the interface routing you mentioned.

Please share the information completely, or perhaps you need a payment for your consultancy ?
Thanks.
by t3rm
Wed Nov 14, 2007 7:05 am
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

Are you sure ? have you tried it ? Two line of DSL i mentioned is the same provider with the same range of subnet. Connecting to one mikrotik router with different interface. As far as i knew, the load balance you said only works with different network block, not the same one. Please give a real exa...
by t3rm
Tue Nov 13, 2007 11:09 am
Forum: General
Topic: block hotspot users from seeing each other.
Replies: 2
Views: 683

Re: block hotspot users from seeing each other.

1. You can have separate subnet for every client you have. But this is not suitable for clients over 100 or 200
:lol:
2. Using PPPoE maybe, since this is a good solution on wired LAN. I never tried it on Wireless.
by t3rm
Tue Nov 13, 2007 11:05 am
Forum: General
Topic: PPPoE and blocking customer
Replies: 7
Views: 1245

Re: PPPoE and blocking customer

Hi guys. I'm thinking to migrate my network to PPPoE, delivering ip automaticaly (pool of ips, not fixed). Today I block a customer with some firewall rules on the gateway (ip addressing is fixed today), redirecting all http request to page warning about the reason of block. With PPPoE, using rando...
by t3rm
Tue Nov 13, 2007 11:02 am
Forum: General
Topic: A bit out of topic but can't help posting it.
Replies: 2
Views: 685

Re: A bit out of topic but can't help posting it.

Wanna try the satellite i'm using ?
You cant rely on 1 connection then. Even the price is expensive, but you still able to serve your customers with 99.9%SLA if you did that.
by t3rm
Tue Nov 13, 2007 6:56 am
Forum: General
Topic: dhcp and ip problem
Replies: 3
Views: 693

Re: dhcp and ip problem

I use PPPoE to avoid this kind of problem for my bad and naughty users.
But to be honest i have tried PPPoE over Wireless and it didnt work.

Once i solved how to make it work on Wireless, then this could be the best solution for this case

8)
by t3rm
Tue Nov 13, 2007 6:52 am
Forum: General
Topic: blog pornsites via firewall ?
Replies: 20
Views: 6848

Re: blog pornsites via firewall ?

Check the firewall option name 'content'
you could use it to match every packets passing your mikrotik with the porn words you need to block.

Or use layer-7-filtering

8)
by t3rm
Tue Nov 13, 2007 6:49 am
Forum: General
Topic: EoIP tunnel possible with dynamic IP at one end?
Replies: 1
Views: 978

Re: EoIP tunnel possible with dynamic IP at one end?

EOIP only able to reach static to static VPN link.
Forget about EOIP, think of OpenVPN.
You could have it on v.3

8)
by t3rm
Tue Nov 13, 2007 6:46 am
Forum: General
Topic: Two main routers instead of one?
Replies: 2
Views: 625

Re: Two main routers instead of one?

You'll have to do that once your mikrotik is in problem. Leaking out of resource.
Check the load, check the memory usage. I cant see why you have to make it two routers.
by t3rm
Tue Nov 13, 2007 6:43 am
Forum: General
Topic: How To encrypt voice traffic passing through MT ??
Replies: 12
Views: 1553

Re: How To encrypt voice traffic passing through MT ??

The easiest thing you should do is contact Net2phone,
is there any chance for you to setup any dedicated server or colocation server under their network.

Then you can setup any VPN from you reaching out your server@net2phone.
After that, your users would be very happy again ..

8)
by t3rm
Tue Nov 13, 2007 6:21 am
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Re: Two interface using the same ip subnet

Chupaka, please explain more details. I have one weird client, h ehe he .. 8) He subscribed with the ADSL Provider and after one subscriber line is not enough, he choose to take another one. So that means there are two ip addresses given by the ADSL Provider running at different interface. I check t...
by t3rm
Tue Nov 13, 2007 6:12 am
Forum: General
Topic: Bandwidth is downed suddenly
Replies: 2
Views: 529

Re: Bandwidth is downed suddenly

Do you subscribe with Asymetric service ?
Usually this case happened when you subscribe with the asymetric service. When the upload goes higher, you'll get the bonus too, that is latency increasing .. :lol: :lol:

Check that first.
by t3rm
Tue Nov 13, 2007 5:59 am
Forum: General
Topic: Compressing Data
Replies: 6
Views: 978

Re: Compressing Data

You need web caching & compression.
That will help lots to reduce your bandwidth quota.
by t3rm
Mon Nov 12, 2007 11:24 am
Forum: General
Topic: Two interface using the same ip subnet
Replies: 25
Views: 11853

Two interface using the same ip subnet

Dear all, I have subscription with two DSL Cable Modem serving the same ip subnet with DHCP. They offered the ip address from 192.168.100.0/24 block. The two line of DSL goes to ether1 and ether2. How do i handle this situation. Logically we cant setup two interfaces in one mikrotik for the same sub...
by t3rm
Fri Nov 09, 2007 8:32 pm
Forum: General
Topic: Problem with ROUTE for VALID IP (Brazil)
Replies: 3
Views: 804

Re: Problem with ROUTE for VALID IP (Brazil)

Hi,

But i need access the MK, from the outside (Internet Cloud).

Sorry, but my english is very poor.

Thanks guy.
Alam Dias

There must be any other things you must set and dealing with NAT.
Please send any graph mapping for your environment setup.
by t3rm
Fri Nov 09, 2007 8:26 pm
Forum: General
Topic: PROXY SERVER + MIKROTIK ROUTER (can mikrotik do this..?)
Replies: 15
Views: 2121

Re: PROXY SERVER + MIKROTIK ROUTER (can mikrotik do this..?)

still waiting for an answer.... :(
read my post, you can do it.
by t3rm
Fri Nov 09, 2007 8:21 pm
Forum: General
Topic: Squid and Mikrotik in a LAN
Replies: 1
Views: 565

Re: Squid and Mikrotik in a LAN

Hi. http://img183.imagevenue.com/img.php?image=01699_Drawing1_122_454lo.jpg I have this setup and i have configured all the browsers to access directly the proxy on linux box (i dont want to make a transparent proxy). The problem is that MT recognizes all the traffic as one Ip (the ip of the linux ...
by t3rm
Sat Nov 03, 2007 7:48 pm
Forum: General
Topic: Mikrotik & BGP
Replies: 6
Views: 1386

Re: Mikrotik & BGP

we use BGP across 8-10 routers all connected with l2tp. We have no problems like you specify, but we are also using > 2.9.45. We also use routing-test. Anything from 2.9.27 - .44 is not the best BGP version. We also put in place good routing filters that won't cause loops or lockups when one router...
by t3rm
Sat Nov 03, 2007 5:33 pm
Forum: General
Topic: PROXY SERVER + MIKROTIK ROUTER (can mikrotik do this..?)
Replies: 15
Views: 2121

Re: PROXY SERVER + MIKROTIK ROUTER (can mikrotik do this..?)

ouw thx for a quick respons..! :shock: mikrotik can do this....!!!! can u pliss help me how to do this...? nb: - mikrotik webproxy transparent enable = yes - proxy server transparent enable = yes when a client try to browsing through proxy server, and i opened the access-log in proxy server the ip ...
by t3rm
Sat Nov 03, 2007 5:18 pm
Forum: General
Topic: Packets Performance on Mikrotik ROS
Replies: 5
Views: 856

Re: Packets Performance on Mikrotik ROS

http://h1x.com/mt/gigabit/gigabit2.html

600,000 pps good enough ?
Could you share your pc hardware specs ? specially with the lan card.
Thanks
by t3rm
Sat Nov 03, 2007 5:15 pm
Forum: General
Topic: Packets Performance on Mikrotik ROS
Replies: 5
Views: 856

Re: Packets Performance on Mikrotik ROS

This will make Cisco people headache ..
:lol:

I bought Cisco 7200 VXR with capabilities of 1millions packets/sec.
So maybe i'll tell my boss to return it to sales company.
Why would we need 7200 if Mikrotik able to do that ..

:lol:


More please .. i need more ..
by t3rm
Sat Nov 03, 2007 4:58 pm
Forum: Wireless Networking
Topic: Opinion Regarding the MIKROTIK R52
Replies: 21
Views: 3314

Re:

samsoft, Hi: With your "crazy of kajilion of watts " I dought you can get any "kbps".. but!!! if you think different you might reach what you want. Hint1, instead of 20 or 10Mhz channel use 5Mhz "lower the noise you receive" Hint2, instead of standard antenna polarization, use new one!! like circul...
by t3rm
Sat Nov 03, 2007 2:41 am
Forum: General
Topic: Packets Performance on Mikrotik ROS
Replies: 5
Views: 856

Packets Performance on Mikrotik ROS

Folks, Its been such a boring topic we have, but i really hate when my folks always comparing ROS to Cisco or Juniper, the high end routers. They always mention about packets, packets, and packets all the time. Could somebody grab some screenshot and put it here for packets flowing through ROS over ...
by t3rm
Sat Oct 20, 2007 3:02 pm
Forum: General
Topic: webserver in routeros?
Replies: 8
Views: 1398

Re: webserver in routeros?

Perhaps what tronity2k means,
Is there any way to change the web page html that showing Mikrotik Login Page in port 80 ?

he he he .. :lol:

Nice idea but i doubt Normis will happy to hear that ..

:?

- Rio.Martin -
Ym: riomartinz
by t3rm
Sat Oct 20, 2007 2:58 pm
Forum: Beginner Basics
Topic: sending massage to the users through the Mikrotik
Replies: 16
Views: 4691

Re: sending massage to the users through the Mikrotik

0 chain=srcnat out-interface=Public src-address=192.168.30.0/24 action=masquerade 1 chain=srcnat out-interface=Public src-address=192.168.1.0/24 action=masquerade 2 chain=dstnat src-address=192.168.1.0/24 protocol=tcp dst-port=80 action=dst-nat to-addresses=192.168.30.2 to-ports=80 [admin@MikroTik]...
by t3rm
Sat Oct 20, 2007 2:51 pm
Forum: General
Topic: Double bandwidth control (Internet & local traffic)
Replies: 12
Views: 1991

Re: Double bandwidth control (Internet & local traffic)

Folks, What Vagan wants is to shape both for local traffic and internet traffic. So that means, he needs two Rules of Queueing. Vagan, you could try Queue Tree, make two different rules @ Firewall Mangle to separate the traffic between local and Internet. Hope it will helps .. 8) - Rio.Martin - Ym: ...
by t3rm
Sat Oct 20, 2007 2:48 pm
Forum: General
Topic: Queue ISP Solution help
Replies: 1
Views: 1684

Re: Queue ISP Solution help

Hello I need some advice, I want to give a client a demo of a mikrotik ISP traffic solution, and want to know if my current hardware can handle the load, the ISP client have right now max out a Allot Netenforcer AC-400 (fully upgraded), with 85-92 Mbps, of bandwidth management at peak hours, he man...
by t3rm
Sat Oct 20, 2007 11:40 am
Forum: General
Topic: how to make visible local network behind hotspot ...
Replies: 6
Views: 1315

Re: how to make visible local network behind hotspot ...

Thank you for the answer but I think I didn't properly understand ... where to put a static route ? My hotspot router has ether1 (uplink) and ether2 (hotspot) ... Thanks again, D. IP -> Route -> Add 192.168.210.0/24 set the gateway to one of your hotspot host (eg: 10.10.1.1) Is it clear ? :lol: - R...
by t3rm
Sat Oct 20, 2007 11:35 am
Forum: General
Topic: Two Network
Replies: 3
Views: 722

Re: Two Network

Perhaps you missed the hotspot configuration. If you placed ip alias for 192.168.1.0/24 , 192.168.2.0/24, 192.168.3.0/24, etc .. on eth0 that means your clients able to reach different network each other. Unless you put something in your firewall .. Salam .. (i come from your country also) .. - Rio....
by t3rm
Sat Oct 20, 2007 11:13 am
Forum: General
Topic: PCQ subqueues scenario
Replies: 11
Views: 1327

Re: PCQ subqueues scenario

Describe the queues scenario for your network more details.
How much for the bandwidth capacity ? do they shared the same capacity among each other ?

:?
by t3rm
Sat Oct 20, 2007 11:01 am
Forum: General
Topic: oneway and 2way please help meeeeeeeeeeee
Replies: 5
Views: 911

Re: oneway and 2way please help meeeeeeeeeeee

What is your purpose placing the 1way server instead of plugging all connection from 1way connection and 2way connection directly to mikrotik ?

Combining two different connection is easy. You can have load-balance method to combine 3 different connection for your setup.

- Rio.Martin -
Ym: riomartinz
by t3rm
Sat Oct 13, 2007 8:16 pm
Forum: General
Topic: squid vs mt
Replies: 27
Views: 3415

Re: squid vs mt

Confirmed on MT 3.0RC6 I did activate the Web Proxy, and did test the proxy connection. Dunno different from squid or not, but got the similar result like Squid, except for the name. (MikrotikHttpProxy) Well i guess, the version 3 is different from 2.9 So lets get back to topic. Anyone already test ...
by t3rm
Sat Oct 13, 2007 5:31 pm
Forum: General
Topic: how to make visible local network behind hotspot ...
Replies: 6
Views: 1315

Re: how to make visible local network behind hotspot ...

add static route 192.168.210.0/24 to one of your hotspot as Linux Router Gateway.
Hope it'll work.
by t3rm
Sat Oct 13, 2007 8:25 am
Forum: General
Topic: Separate Browsing and Download Routing.
Replies: 6
Views: 2428

Re: Separate Browsing and Download Routing.

Haiyaa .. lu YM gue la

Sorry for others ..
8)
by t3rm
Sat Oct 13, 2007 8:21 am
Forum: General
Topic: Multiple Public IP/s on WAN - how to use them inside network
Replies: 12
Views: 4022

Re: Multiple Public IP/s on WAN - how to use them inside network

No I don't think my isp will want to do that. I have found out my isp has me set up using NAT 1:1 using the action=netmap command. so now that leaves me with more questions, since this is not working with some protocols. 1. Can a machine in the private network use a public ip, and route correctly? ...
by t3rm
Sat Oct 13, 2007 8:05 am
Forum: General
Topic: squid vs mt
Replies: 27
Views: 3415

Re: squid vs mt

no, mikrotik proxy is NOT based on squid or anything else. Normis: :lol: :lol: :lol: This is what i got from one of my client running 2.9 Mikrotik Webproxy. Did telnet to its proxy and got the result like this: -- HTTP/1.0 400 Bad Request Server: squid/2.5.STABLE11 Mime-Version: 1.0 Date: Sat, 13 O...
by t3rm
Thu Oct 11, 2007 7:37 pm
Forum: General
Topic: Multiple Public IP/s on WAN - how to use them inside network
Replies: 12
Views: 4022

Re: Multiple Public IP/s on WAN - how to use them inside network

Only two options you can have:

1. Ask you provider to give your MT, static route for your network /27. Then you can divide it into several /29
2. Use NAT 1:1 , but your clients might not using public ips anymore.

8)

- Rio.Martin -
by t3rm
Thu Oct 11, 2007 7:20 pm
Forum: General
Topic: squid vs mt
Replies: 27
Views: 3415

Re: squid vs mt

Quite strange topic .. :lol: Mikrotik vs Squid. From what i knew, Mikrotik build the proxy based on Squid also. So you can only see the differences between both, only on the parameters. Squid provide more and more advanced configurations, while Mikrotik. It just simplify the complex configurations f...
by t3rm
Thu Oct 11, 2007 7:15 pm
Forum: General
Topic: MT the answer for a DS3
Replies: 5
Views: 880

Re: MT the answer for a DS3

dankerr:
The traffic capacity might not become problems.
But the packets/second sent and receive to your network, it will ..

:lol:

How much do you got for packets/sec count passing your MT ?

- Rio.Martin -
by t3rm
Thu Oct 11, 2007 7:11 pm
Forum: General
Topic: Need help ASAP!!!!
Replies: 2
Views: 484

Re: Need help ASAP!!!!

Add your "device" network to routing list. Place it under your mark.
It should works.

:lol:

- Rio.Martin -
by t3rm
Thu Oct 11, 2007 7:05 pm
Forum: General
Topic: Public IP's in "private" networks.
Replies: 4
Views: 1549

Re: Public IP's in "private" networks.

Henrik, There are nothing wrong in your setup. 1. You must check the availability of your network 82.150.85.0/24 Have your ISP succesfully activate it for you. Give the unlimited ping counts to 82.150.85.1 from other network outside your own network (internet). Watch the packet sniffer for network 8...
by t3rm
Thu Oct 11, 2007 6:46 pm
Forum: General
Topic: graphing stats for specific IP
Replies: 3
Views: 1152

Re: graphing stats for specific IP

Please note,
the graphing only available at Simple Queue mode, not for Queue Tree Rules.

Is there any way to graph for Queue Tree Rules.
I love it so much .. he he he ..

:lol:

- Rio.Martin -
by t3rm
Thu Oct 11, 2007 6:40 pm
Forum: General
Topic: Separate Browsing and Download Routing.
Replies: 6
Views: 2428

Re: Separate Browsing and Download Routing.

denny_k:
where u live ?
I have already tested your scenario under Squid in my Linuxbox. It worked ..
8) 8) 8)

- Rio.Martin -
Ym: riomartinz
by t3rm
Wed Oct 10, 2007 9:48 am
Forum: General
Topic: ADSL PPPOE client not working fine
Replies: 7
Views: 1772

Re: ADSL PPPOE client not working fine

1. Make sure you have the ip address assigned by modem, and check the routing tables. You should have default gateway routing and the ip address itself. Be sure to check the DNS Servers assigned also. Check with ping. Got reply ? 2. Give the report of pinging the host: http://www.mikrotik.com , what...
by t3rm
Wed Oct 10, 2007 9:38 am
Forum: General
Topic: How do I proxy traffic to an address through a specific addr
Replies: 5
Views: 904

Re: How do I proxy traffic to an address through a specific addr

The easy way is setup Linux Box and install Squid Proxy Server.
Use the option "tcp_outgoing_address" and that will work.

Or wait MT to release new version with the parameter like that available 8)

- Rio.Martin -
by t3rm
Wed Oct 10, 2007 9:34 am
Forum: General
Topic: Public IP's in "private" networks.
Replies: 4
Views: 1549

Re: Public IP's in "private" networks.

Just add the static Routes for Client IP Addresses on each of the router. And that will works.

- Rio.Martin -
by t3rm
Wed Oct 10, 2007 9:29 am
Forum: General
Topic: Need Help to Setting PPPoE Server [need help from Mikrotik t
Replies: 3
Views: 920

Re: Need Help to Setting PPPoE Server [need help from Mikrotik t

Explain how you set (step-by-step) the PPPoE installation on Mikrotik.
Perhaps you missed just one step.

- Rio.Martin -
by t3rm
Wed Oct 10, 2007 9:26 am
Forum: General
Topic: SSH version
Replies: 3
Views: 954

Re: SSH version

I suggest, better change the default port 22. MT using OpenSSH. I dunno how tough the existing OpenSSH right now, but from 2 years ago, i moved to SSH.Com instead of OpenSSH because my public and well known servers r00t3d down by unknown hacker with the exploit i knew very well. The SSH exploit rele...
by t3rm
Thu Sep 13, 2007 7:47 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: Mikrotik + Web Proxy Queueing is Impossible ?

Valens:

Take the google: Iptables+DSCP
The magic is in DSCP :lol:

Version 2.9.x didnt have DSCP. So it wont work.
I guess your Wiki and PDF should be update.
by t3rm
Tue Sep 11, 2007 3:49 pm
Forum: General
Topic: One Way Satellite
Replies: 20
Views: 2104

Re: One Way Satellite

hulk-bd:

Please put your things in here .. 8)
by t3rm
Tue Sep 11, 2007 3:48 pm
Forum: General
Topic: One Way Satellite
Replies: 20
Views: 2104

Re: One Way Satellite

That because we are coming from the same location, Indonesia ..
ha ha ha ha ..

hope i cant get lots of friend using Mikrotik.
So when i get troubles, i'm not alone .

:lol:
by t3rm
Mon Sep 10, 2007 9:42 pm
Forum: General
Topic: Is this strange?
Replies: 11
Views: 1213

Re: Is this strange?

ilius168: I think this situation happened because you activate web-proxy in MT#1. Once you deactivate the web-proxy on MT#1 and leaving the connection to your users wide open without any proxy, the connection would be the same between MT#1 and MT#2 On MT#1 you activate web-proxy. On MT#2 you activat...
by t3rm
Mon Sep 10, 2007 9:21 pm
Forum: General
Topic: Access to Winbox port blocked.
Replies: 2
Views: 561

Re: Access to Winbox port blocked.

I mean, is there any option i can get to change the way mikrotik listen besides port 8291 ?

8)
by t3rm
Mon Sep 10, 2007 9:18 pm
Forum: General
Topic: One Way Satellite
Replies: 20
Views: 2104

Re: One Way Satellite

effendi:
where are your location ?
perhaps i can solve it quick by coming to your place.

8)

just mail me: riomartin et bloomasia dot com
by t3rm
Wed Sep 05, 2007 8:49 pm
Forum: General
Topic: ICMP connections, bypass QoS?
Replies: 9
Views: 2423

Re: ICMP connections, bypass QoS?

This is cool !!
I think your users using some kind of VPN over ICMP.

Just wonder where can i get ICMP VPN .. :lol:

For you to shape the ICMP, you can user Queue Tree and use mangling to push the ICMP packets to queue in the class you described.

Hope this will help.
by t3rm
Wed Sep 05, 2007 8:45 pm
Forum: General
Topic: Access to Winbox port blocked.
Replies: 2
Views: 561

Access to Winbox port blocked.

Folks,
I dont know which port listen on Mikrotik for Winbox access. But for sure, i think my ISP already blocked my Mikrotik Winbox ports. I cant access my Mikrotik Routers right now.

Am i able to change the port which Mikrotik listens ?

Thanks before.
by t3rm
Mon Sep 03, 2007 6:57 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: Mikrotik + Web Proxy Queueing is Impossible ?

:D :D Thanks God :D :D

Finally GWISA understand ..
by t3rm
Sun Sep 02, 2007 10:19 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: Mikrotik + Web Proxy Queueing is Impossible ?

GWISA: I have done as you said in your post above. The results: 1. Packets for Web Traffic always filled chain OUTPUT in mangle. Mikrotik cant differentiate whether the packets are from Internet or from Cache Disk. They both transferred to users from Mikrotik Proxy Port (eg: 3128) to Users Side. Bot...
by t3rm
Sun Sep 02, 2007 11:21 am
Forum: General
Topic: Router Os sudden death !!!
Replies: 23
Views: 3435

Re: Router Os sudden death !!!

samsoft08: I guess this must be the hardware problems.
Try to use other OS and see if the problem still appears.
by t3rm
Fri Aug 31, 2007 9:55 pm
Forum: General
Topic: Firewall again
Replies: 11
Views: 1533

Re: Firewall again

Your ISP blocking winbox port to demo.mt.lv

:lol:
by t3rm
Fri Aug 31, 2007 9:53 pm
Forum: General
Topic: VPN for mobile users that works from everywhere.
Replies: 15
Views: 1604

Re: VPN for mobile users that works from everywhere.

OpenVPN would be better, i guess ..
:D
by t3rm
Fri Aug 31, 2007 9:50 pm
Forum: General
Topic: I wonder why my ISP DHCP Server wont give my Mikrotik any IP
Replies: 4
Views: 751

Re: I wonder why my ISP DHCP Server wont give my Mikrotik any IP

Try setting up your pppoe on a different interface. ether2 instead of ether1 See if that helps. Be sure to change the MACs. I saw this with a router board 532, and swapped it with another board and it worked fine. Done it already. Wont do any good also. The same problem exists. Even changing mac ad...
by t3rm
Fri Aug 31, 2007 8:47 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: Mikrotik + Web Proxy Queueing is Impossible ?

GWISA : I Give Up .... :( :( :( I dont quite understand with what you re saying completely. But from all the URL of documentation you gave. None of them giving me a clue for this thread. Perhaps it would be better if you give me an example, how if you are in my side. Let say this one: You have clien...
by t3rm
Wed Aug 29, 2007 7:57 pm
Forum: General
Topic: I wonder why my ISP DHCP Server wont give my Mikrotik any IP
Replies: 4
Views: 751

I wonder why my ISP DHCP Server wont give my Mikrotik any IP

This is happened about a week past. I'm subscribed with the DSL Cable to my ISP. About a week past, my Mikrotik wont initiated the connection to my ISP DHCP Server. There is mac address lock option in my ISP. So i have to tell them my mac address and they only open listed mac address in their server...
by t3rm
Wed Aug 29, 2007 7:38 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: How to handle Queues to Users with WebProxy

t3rm - ignore samsoft08, he is just an impatient and frustrated MT user & knows not what he says. I don't understand why you say you can't differentiate traffic originating from the proxy from traffic from the internet? Surely mangling on the appropriate chain should accomplish what you are trying ...
by t3rm
Tue Aug 28, 2007 11:16 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: How to handle Queues to Users with WebProxy

I have fully understand the documentation wrote by Valens Riyadi in this url: http://wiki.mikrotik.com/wiki/Queue_with_Masquerading_and_Internal_Web-Proxy But still those are not the answer. Because whether packets cached or direct, once we have set transparent proxy, all the packets from LAN side w...
by t3rm
Mon Aug 27, 2007 5:55 pm
Forum: General
Topic: what to do when found infected user?
Replies: 10
Views: 1304

Re: what to do when found infected user?

I Prefer to push their packets to my SpamAssasin Server.
So it would be very wise to let them know themselves their PC infected by viruses.

- Rio.Martin -
by t3rm
Mon Aug 27, 2007 5:25 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Re: How to handle Queues to Users with WebProxy

I Agree with samsoft08. The topic in here isnt how to mark the packets or putting packets in mangle. But more precisely how to queue packets coming from Internet without interfere the packets coming from the cache disk. In other words, packets coming from cache disk should be deliver at maximum LAN ...
by t3rm
Sun Aug 26, 2007 9:13 pm
Forum: General
Topic: Split UpStream & Downstream
Replies: 14
Views: 2250

Re: Split UpStream & Downstream

It is POSSIBLE to do it without you having interfere with the BGP option since the BGP is in ISP side. Once you get ip addresses from your ISP, of course packets from everywhere around the world would come to your side from your ISP. But for the packets leaving your side, can be choose which gateway...
by t3rm
Sun Aug 26, 2007 8:41 pm
Forum: General
Topic: Mikrotik + Web Proxy Queueing is Impossible ?
Replies: 101
Views: 28556

Mikrotik + Web Proxy Queueing is Impossible ?

Folks, Sorry if this question already posted before. I want to know how to handle Queues if i have to serve users in my net with WebProxy enabled. Once we set the queues, Mikrotik wont understand the packets cached by WebProxy should be deliver at LAN speed and non cached packets should be queue wit...