This seems to be resolved after upgrading my CRS354 switch. I saw this in the changelog for this months firmware:
*) crs3xx - fixed hardware offloaded bonding on Ethernet interfaces for CRS354 devices;

While investigating and trying to resolve this, I have found that if I have a non-bonded link between the router and the switch, all traffic flows properly. If I have a bonded link, such as the example shown above (using balance-xor) or 802.3ad, the devices cannot talk to each other. Is there some k...

I have a router (RB3011UiAS-RM) and a switch (CRS354-48G-4S+2Q+). Devices connected to the switch can ping the router, and the switch. The switch and router themselves cannot seem to talk to each other. Their route table is set up as I would expect. This started after switching from a configuration ...

I'm attempting to migrate my existing router configuration from using multiple bridges (one per VLAN), to a single bridge, as described in https://help.mikrotik.com/docs/display/ROS/Bridge+VLAN+Table. While this is working well for our switches, I am running into issues when attempting to do it on o...

I see now looking at the wiki that it is included, though I missed it during my reading of it.

Thank you both. Adding tagged=bridge1 to the bridge VLAN has resolved the issue.

Hi everyone, I've been running Mikrotik gear for a while, but with the new switch we have for the office, I'm trying to make sure I do things "properly". I'm attempting to follow the wiki, specifically, https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#Management_access_configuration....