Hi Anybody else getting stale pppoe connections ? V6.40.8 CCR1009 +- 1200 ppp connections MPLS/VPLS It happens on random vpls tunnels and random clients. pppoe-out needs to be disabled and enabled again to reconnect Happens with Mikrotik ( all version ) and Ubiquiti antenna's client side Once it hap...
I have major issue with the RB2011x with Ligowave equipment port flapping .I have 10 Ligowave / R2011 on the network and every single one has given issue with the Ethernet ports flapping .
Does anyone actually use the default configuration script ? I have have Grooves now that randomly half-reset themselves to this stupid script. The pppoe is connected and wlan but can't winbox, once I have mac-telnet I get this The following default configuration has been installed on your router: --...
Hi Guys I am currently changing my network to use ospf/mpls and vpls but always see to come to a problem when I want to use vpls when the router is routed thru statically. The vpls registers but no traffic can pass thru. 1. I have checked MTU 2. I have no issues if the router has OSPF running on it....
Hi Guys I am having a strange problem Here is my setup CCR --> Rockets <--- RB750 v6.1 ( in switch mode now .. also have tried bridge ) --> ISP's Cisco Router The link running @ 50Mbps without any issues. Latency is around 2 to 4ms When Link runs @ 61Mbps with under 20ms .. The link never completely...
I am getting allot of Infringement copyright notices and would like to know if there is anyway I can pass them to the client's while they are coming from a natted ip address. 1. Is there anyway to do this with Mikrotik? 2. Is there any hardware/software ? 3. Just apply for my own block of IP address...
Hi All my pppoe and pptp clients + eoip tunnels have high latnecy thru the tunnels/pppoe/pptp but anyhting that is outside the tunnel is fine. + 500 pptp mixed with pppoes clients --- All clients have dynamic simple queues + 40 EOIP tunnels + 10 Vlans + Dude + taffic runs +- 30mb full Duplex PC Spec...
I want to try and bond my dsl lines with a larger International ISP.
Does anyone know of a company that would let me put in a RB750 in their Data Centre or want to try this with me ?
It would be a very simple setup
2x RB750
3x DSL lines on my side
3x eoip tunnels
1x bonded link
I have set-up a bonded wireless link with eoip . The bonded link works just my throughput is worst than the standard ptp link . Standard PTP link = 10mbs half duplex on each link Bonded link = 7mb half duplex and pings stay at 2ms Have tried all the different modes , no difference My setup is 1x x86...
I am not complaining , Just wanted the MT guys to know ... Yes it works thru mac and changing the port. I changed the port back to 8291 and now it is working again .
Yes i want the client to use the same uplink , this sorts out online gaming / https / etc etc . The network has +- 1000 clients but what i have done now is moved the routing rules around and see the uplinks are better balanced now
I am trying to load balancing 3 lines thru pcc src-address , reason i am using src-address it looks like to me that the connections from each client will go thru the same line. connections - both-address pcc-both-address.png connections - src - address pcc-src-address.png The only problem now is tha...
I have come to a point now that i know that my sip provider will not work with mikrotik but i have a work-around The only way i can get it to work is bridging with a dsl line and auth the voip phone with a dsl account. My provider supplies the phone that double's up as a router. The idea is to creat...
I upgraded user-manager to 3.30 this weekend and none of my user can login into x.x.x.x/user any-more . It comes up with invalid username and password even if i create a new user. The ppp sessions are working fine
Thanks I got it work but it is not the ideal solution.
What I am trying to achieve is to get Windows Network Discovery to work across to 2 different subnets.
As far as I know I can do this via a wins server or AD but would like to do it with Mikrotik
Hi Is it possible to bridge ether1 with a eoip and use a dhcp-server from a remote routerboard ? I have the following set-up Main Board---> Ap <--- Second Board eoip<------------------->eoip dhcp-server<---------Bridge ether1 with eoip ( pc's on ether1 with get assigned address from dhcp-server on m...
Hi I would like the below script to e-mail me a list in one e-mail with all the user's that have gone over 10Gigs. The script does work but i receive one e-mail per a user that has one over 10gigs. :global bytesin :global bytesout :global bytestotal :global name /tool user-manager user :foreach i in...
A similar probe as the radius, sometimes i need to restart the user manager server due to clients that can not authenticate and i prefer to know that it is not working before the client knows.
Hi I have a bit problem with OSPF and Areas. I have setup the pppoe and backbone routing the same as the wiki with the backbone and pppoe with different area. When i enable ospf pppoe on R2 i lose the pppoe routes from R4 and R5 on R3 the and backbone is fine. R1 router-id: 172.30.0.2 distribute-def...
Hi SurferTim I was going to use the script to change my pppoe accounts once they where capped As i am very new to scripting this is what i have come up with so far :local pppoe ([/interface pppoe-client get [/interface find comment="adsl"] running]) :if ($pppoe = false) do={:put [/interfac...
Hi Sergejs The current Network topology is 1.WISP 2.Routed Network ( No bridging ) 3.Radius Manager To get pppoe working is no problem on the network , i just would like to know if there are any advantages using pppoe. Would i start having issues once a hit 1000 clients pptp? Is security better with...
Hi I have been thinking of changing my network from pptp to pppoe +- 300clients. 90% of the clients use mikrotik cpe's so there will not be much of a head ache changing the clients side of things. Has any one changed their whole network like this before ? Are there advantages changing to pppoe ? Or ...
I have no problem yet as i don't have 600 users but will be taking two servers that both have 300 users each and using one server. I had endless issue's with version 3.10 and below when i had more than 200 connections , downgraded to 2.9 no more problems. I thought maybe that i will have issues with...
Hi My scripting skill are pathetic but have tried to create a script that will shape my clients once they reach 200megs per day. Here Goes :local traf; /queue simple :foreach i in=[/queue simple find dynamic=yes] do={ :set traf [get [/queue simple find dynamic=yes] total-bytes] :if ($traf > 20971520...
I have been using OS 2.9 for the last 2years and have hardly no issue with it. Week ago i thought it would be nice to see what v3 has to offer. I have 3 mikrotik boxes on the network with +250 clients 1st : ppp server x86 (upgrade to v3) 2nd : traffic shaper , dns , proxy x86 (upgrade to v3) 3rd : g...