MikroTik

qatar2022

thank you @TheCat12 it is a headache but have you read configuration file? why i have to use vlan98,99 ? and i have to use IP Address/Subnet Mask:10.184.139.160/255.255.224.0 Gateway:10.184.128.1 DNS Servers:212.77.192.59,212.77.192.60 for voice note: each time i try to use your configuration you po...

qatar2022

Wait a second, can't you just add a VLAN30 interface, bridge it with the ether8 port and add a DHCP client if necessary? Why did I remain convinced that ether8 should be a trunk port? Now I feel as if I'd taken crazy pills /interface vlan add interface=sfp-WAN name=vlan30 vlan-id=30 /interface brid...

qatar2022

Is your ISP providing VLAN 30?

yes

qatar2022

when i use Mikrotik FTC11XG media converter with XGS-ONU-25-20NI this is how Mikrotik FTC11XG media converter converter read it

qatar2022

try media converter FTC11XG from mikrotik

qatar2022

I can't change actual MTU and i make MTU test and i found 1430 is the best value but i don't know where to put it in mikrotik Max MTU, Max MRU or MRRU

qatar2022

since i update MT RB5009 from 17.4.2 to 17.4.3
i have an issue with mtu ( invalid mtu 1492 on pppoe-out1 from fe80::200:5eff:fe00:103)
What is the causing of this problem?
with v17.14.2 i didn't get this issue

qatar2022

any reply

qatar2022

Im using the RB5009 router , and i created a hotspot. everything work just fine! The problem is when im connected to the WiFi from an device, it does not redirect automatically to ask for user and login pass, u have to manually set it on the url to the specific dns name. so is there a way that i can...

qatar2022

any command or advice

qatar2022

anyone can help me to do that please

qatar2022

try this

qatar2022

Dear all I just received MikroTik Fiber-to-Copper converter FTC11XG and I spent more than three hours trying to figur out to configure it with DFP-34X-2C2 stick it is little bet complicated device at least for me because i also have to configure vlan10 for internet and PPPoE any help on hear or http...

qatar2022

Change the user and password inputs to type=hidden and add value=user and value=password to each.

can someone help me how to do that?
thanks

qatar2022

I have MT RB5009 DHCP server and I also have CRS328-24P-4S+ I configure it as a switch which connected to RB5009 and I have 5 devices Grandstream GWN 7610 PoE Wifi AP connected to CRS328-24P-4S+ I configured the with password my issue is that i cant removed or disable username from hotspot that i cr...

qatar2022

Also for your company is a good idea to test the new releases because you fix one issue and broke a 4 things that working good.

I totally agree with you, and it's become a tread mark form mikrotik

qatar2022

Hello! I'm at the beginning and I'm trying to learn to use mikrotik. I installed mikrotik 7.14 chr on a vps, and the provider assigns my ips statically. With ipv4 it was a game, but the problem comes when I add ipv6, I add routes and it doesn't work in any way. No route to host... /ipv6 address add...

qatar2022

Presuming that the GrandStream can handle tagged VLAN traffic and based off my previous mistakes during your former topic, for which I apologize, I've come up with a hopefully working solution: 1. Create a VLAN 30 interface, assign it the given address and bind it with the bridge interface 2. Set V...

qatar2022

Hi,
I already updated to v7.14 for my RB4011. When I check RouterBOARD, it says current firmware 6.44.3.

Is firmware RouterBOARD is different than ROS v7.14 I upgraded through package. Do I need to click Upgrade on RouterBOARD too?

WG setup 4.jpg

hit upgrade and reboot

qatar2022

Do you think you could post your config? /export hide-sensitive file=anynameyoulike attached anynameyoulike thanks JazzMaster this is address list, dhcp, etc for your vlan30 IP Acquisition Mode:DHCP IP Address/Subnet Mask:10.184.139.160/255.255.224.0 Gateway: 10.184.128.1 DNS Servers: 212.77.192.59...

qatar2022

Hi I replaced my Gpon Huawei router with ODI Realtek DFP-34X-2C2 and its work fine by creating Vlan10 for internet with PPPoE on sfp port. am still suffering from configuration issue with Vlan30 for Voice or VoIP the scenario is: https://i.ibb.co/1vmLVv6/EymCq2.png can you please help me to configur...

qatar2022

So yes indeed! It got the right dns servers for the wan and the voip with the commands that you provided! And now I can visit websites as well. Also I turned off the pppoe logging. I am just now waiting for the extra IPs and I will move on with the PBX config and let you know of the result! :) I re...

qatar2022

I try it but it's not working and even I can't login to mikrotik anymore, so I do reset it to default setting and restore backup.
why i have to add sfp wan interface to bridge? I think this is why i can't login to MT

qatar2022

If I understand correctly, ports 1-8 will be access ports and sfp port is trunk. So, you will add it to the bridge, after that you will assign pvid of 30 to the access ports, add a bridge VLAN entry for the trunk port and turn on VLAN filtering: /interface bridge port add interface=sfp-WAN bridge=b...

qatar2022

this it
sfp gpon stick trunk port and grandstream ucm pbx on port 8
access ports bridge from port 1-7

qatar2022

my plan is 1G with 3 Vlan Vlan10 for internet Vlan20 for IPTV Vlan30 for VoIP I replace Huawei HG8240T5 Gpon with LXT-010S-H from LEOX and I'm install it in to Mikrotik RB5009 from Mikrotik I setup Vlan10 and PPPoE for Internet and Its work and I got internet connection, but I couldn't figure out ho...

qatar2022

first you have to have DDNS and flow port forwarding

on (Dst. Port) put your OLT port

on (To Addresses) put your OLT and port

qatar2022

I have the same issue. After this problem I install proxmox on mini pc and I creat windows 11 VM and I use Dynamic DNS Update Client continually checks for IP address changes in the background and automatically updates the DNS at No-IP whenever it changes

qatar2022

I'm facing this exact same problem.

qatar2022

I have No-IP domine subscription and I have static IP address I would like to run script on Mikrotik RB5009 v7.12 to update No-IP
with regards

qatar2022

i have Leolabs LXT-010S-H and its work but if i removed Leolabs LXT-010S-H from mikrotik rb5009 and insert it again i have to reboot mikrotik 4 or 5 times.

qatar2022

I have used Dimiks (based on the Realtek RTL960x series chips) smart ONT. First caveat: Do not unplug/insert live. Mine would reset my RB5009. Second: Work closely with your ISP. Certain OMCI messages can flag your device and be blacklisted. I have cloned a Calix 803G using a USB serial to TTL cabl...

qatar2022

more details
https://hack-gpon.org/ont-leox-lxt-010s-h/

qatar2022

actually, my ISP installed Huawei EchoLife HG8240T5 and I replaced the Huawei with GPON STICK LXT-010S-H from LEOX and connected to MikroTik RB5009UG+S+ and works great vlan for internet and I got static IP but I don't know how to setup vlan for iptv and voip

qatar2022

Only when logging on different log level you can change color, error log level (topic) is in red color and warning in blue.
Code: Select all
:log error ...

thank you
I just edit script and change log info to log warning

qatar2022

dear all
is there any way or script to add (red color) on log at lees for ddns update
see attach screenshot of log
with regards

qatar2022

Dear all I install a pihole on Raspberry Pi4 (pihole IP 192.168.8.217) and I setup DNS setting on Mikrotik RB5009 to Raspberry Pi IP and I setup DNS Server on DHCP Server to pihole and finally I add NAT on Firewall for Raspberry Pi every things work great BUT If I disconnect Raspberry Pi for any rea...

qatar2022

do the seam
note:
my pbx ip is 192.168.8.25

qatar2022

I have the seam issue would you please how to fix it please thanks Configure 2 Bridges and all vlan interface, assign access interfaces to lets say BR1 and one vlan facing ISP, under physicall interface towards ISP in my case unerd eth1. Under BR1 ports you must add all access ports but physicall o...

qatar2022

I have seam issue

qatar2022

As llag pointed out, you'll need something like the GPON-ONU-34-20BI which will allow you to emulate the connection. Big thread about this for ATT. There are specifics for your ISP that we would all need to know. Having the module itself is not enough. please don't use it because it will NOT work w...

qatar2022

Configured TV_IN vlan 388 under WAN interface, so this one is not available, when configured another interface TV_OUT vlan388 and assign it to DHCP interface no ip address was assigned. i'm using sfp gpon and I have 3 Vlan internet Vlan 10 priority 0 IP Acquisition Mode: PPPoE ---------------------...

qatar2022

Getting the most out of this forum by normis, MikroTik Support Topic is getting views but the homework just isn't there. It's just what happens absent adequate information. Getting the most out of this forum by normis, MikroTik Support reflect your respect! If you would like to help, then help.

qatar2022

i just connect iptv device to mikrotik rb5008

qatar2022

hello olease gays

qatar2022

have the same problem on 7.11 firmware

qatar2022

o... nobody knows anything about this?

qatar2022

Hello. My ISP provides Internet VLAN (10), IPTV on a separate VLAN (20) and Landline Telephone VLAN (30) and. In order to watch TV without problems the provided IPTV Box must be connected directly to this VLAN (20). My current RB5009 is connected using LEOX LXT-010S-H SFP GPON Module to ISP On VLAN ...

qatar2022

Thanks, today my provider hooked me up so i had a valid fiber connection, this time it worked! This is what i did to use the SFP instead of the ONU Addresses -> Add New -> Interface SFP with address 192.168.1.15/24 tools -> telnet -> ssh ONTUSER@192.168.1.10 password is 7sp!lwUBz1 set_serial_number...

qatar2022

Finally got fixed it.

I have the seam issue would you please how to fix it please
thanks

qatar2022

I have seam issue hare and I realised that static IP of raspberry and if raspberry IP is dynamic it will show you connect but any way my raspberry connect to internet and pihole work great

qatar2022

@qatar2022 Did you manage to find a solution to enable IPTV on MT for Qatar's ISPs? ie Ooredoo? Also, how do you get MTs into Qatar? I can't seem to ship them here (always stopped my shipping company requiring a license) and I have to resort to bring it in manually when I'm flying to Qatar in my lu...

qatar2022

@qatar2022 Did you manage to find a solution to enable IPTV on MT for Qatar's ISPs? ie Ooredoo? Also, how do you get MTs into Qatar? I can't seem to ship them here (always stopped my shipping company requiring a license) and I have to resort to bring it in manually when I'm flying to Qatar in my lu...

qatar2022

Ignoring the fact if you can ask or not your ISP to change the GPON config, Your friend that suggest switch mode is more smart than who uselessly suggest double nat with hotspot, like ChatGPT when do not know how to reply invent the instructions... How to: learn to use winbox by MAC address to acce...

qatar2022

Dear all My service provider install Huawei HG8240T5 GPON unite with DHCP enable and I don't have any access to it and I can't change any thing on it and the IP is 192.168.100.1 the service comes with VOIP and IPTV and all device has static IP and all device are locked I can't do any change NOW I ha...

qatar2022

where is password recovery link to change my forum password?????

qatar2022

Dear all I just subscript with Fiber 500MB, and my ISP install EchoLife HG8240T5 GPON Terminal and including VOIP and IPTV I connect it with MikroTik RB5009UG+S+ and the MT works as hotspot DHCP server, and I connect MikroTik RB5009UG+S+ to MikroTik RB4011iGS+RM and its work as switch. NOW when I co...

qatar2022

Dear all yesterday I subscript with new fiber optic server from my ISP 500MBP and today they come to my home and install EchoLife HG8240T5 GPON Terminal single and this type of device get configuration and setup from IPS through fiber even if I do factory rest and after booting up the device get con...

qatar2022

Dear all

I have MikroTik CRS328-24P-4S+Cloud Router Switch runs as a switch and I want to change it to SwOS
Can I run CRS328-24P-4S+ as a switch? is their any configure I have to do it with SwOS to run as a switch?
how can I change CRS328-24P-4S+ OS from SwOS to RouterOS ?

with regards

qatar2022

so in this case it doesn't matter if I keep both 5G router in bridge mode or not.

qatar2022

Dear @mkx I would like to think you for your help and support regarding port speed and auto negotiation after I read your reply I found one end of ethernet cable on A mode and the other end on patch panel on B mode and I change it to all B mode and the port speed reach to 1g and I can tell you that ...

qatar2022

see attached..

qatar2022

Dear all I have 2 Mikrotik Router (MikroTik RB5009UG+S+ and MikroTik RB5009UPr+S+) the first one I set it up as hotspot DHCP server located in grand floor and the secund one I set it up as a switch located in first floor and I connect them with cat6 cable but the speed on MikroTik RB5009UPr+S+ (100M...

qatar2022

Dear all
I have 2 HUAWEI 5G CPE N5368X connecting to MikroTik RB5009UPr+S+ (load balance failover) NTH and I setup both HUAWEI 5G CPE N5368X as bridge.
How to know if am still behind NAT or not.

Best Regards

qatar2022

I think but i'm sure they selling you a used device NOT new call the police

qatar2022

dear all
i recently install winbox on my mac device M1 and its work great but I cant write on it with arabic language
is there any way to correct this issue please?
thanks

qatar2022

Was really interested how can I setup pihole in container on my RB5009, watched videos, then repeated according to https://help.mikrotik.com/docs/display/ROS/Container , added all my ADList rules with 786000 domains (I used pihole on my NAS for few years). What can I say: -- very poor usability -- ...

qatar2022

Dear all I have a question regarding Aggregation. now I have 2 Huawei 4g CPE router and each one has 500mb DL so total 1GB DL and I have MT RB5009 and I'm using NTH failover but the speed around 480mb I watch serval video on YouTube about bonding that can do Aggregation to get full speed from both I...

qatar2022

as I mention that I have Huawei 5G router which is connected to MK RB5009

NO ONE even mention that I have to change the DNS from Huawei router to Pihole DNS

qatar2022

Dear all

I would like to thank myself for helping me regarding pihole
finally, I solve the issue that I was connect my PC to my MK via sfp-sfpplus1 port and I change it to ethernet port and its work great.

qatar2022

No it's not working and no internet as well and I reset my MK to factory and reconfigure it again and seam issue

qatar2022

Dear all I'm going to tell you my experience about installing pihole docker container on my MK RB5009 I follow all instruction step by step latter by latter but when I run container interface, I can't get internet from the holl of my Wi-Fi and ether port. I adjust my 5G router DNS to auto I create b...

qatar2022

dear gabacho4 thank you for your reply and help I didn't use usb yet I'm using now routers Nand memory because i got an error during extracting image https://www9.0zz0.com/2023/01/20/13/334929766.png https://www9.0zz0.com/2023/01/20/13/539195067.png https://www9.0zz0.com/2023/01/20/13/183540674.png ...

qatar2022

[admin@MikroTik RB5009UG+S+] > container/print 0 name="ffb12c5a-7b19-4438-b064-8002de34b7ae" tag="pihole/pihole:latest" os="linux" arch="arm64" interface=veth1 envlist="pihole_envs" root-dir=disk1/pihole mounts=etc_pihole,dnsmasq_pihole dns="&qu...

qatar2022

Dear all I install pihole container on my MK RB5009 ( finally) and I think it’s working and as you know while pihole works on MK it’s takes up space from MK memory When I tried to install pihole on usb and during extracting I get error!!!! Do you know what is wrong I made? I already format usb ext3 ...

qatar2022

I did exactly but the pihole page not open I got this page

any help please
regards

qatar2022

dear all I have MikroTik RB5009UG+S+ (192.168.8.1) hotspot server and I have 2 Huawei 5g CPE N5368X (192.168.1.1) and (192.168.2.1) connected to MK and I set it up LOAD BALANCING NTH I follow instruction to install container on this video https://youtu.be/UMcJs4oyHDk to use pihole but when I reach t...

qatar2022

thanks, I'll try it.

qatar2022

I have the seam issue my total speed 500mb i can get if i connect my PC direct to Huawei 5G N5368X max router but if i connect RB5009UG+S+IN to huawei 5G N5368X max router and connect my PC to RB5009UG+S+IN with fasttrack UPD,TCP i get 200mb

qatar2022

it's very very slow to download update for 11 MT device

qatar2022

it's a Tred mark for Mikrotik company for all their product (port flapping) I don't know why MK ignore this common issue

qatar2022

Dear Sir,

I just bought Mikrotik cAP ac RBcAPGi-5acD2nD from third party on amazon and I lived in State of QATAR and each time when I try to change country for 5Ghz i get error massage (interface wlan2 country not allowed).

is there any chance to unlock it or any support from you?

Best Regards

qatar2022

Dear all i have MikroTik hEX PoE RB960PGS and i need it to work as switch but each time when i make setup and i need device ip 192.168.8.55 but the device chooses random ip not what i need is there anything missing i can't figure out the problem MikroTik hEX PoE RB960PGS connect to MikroTik RB5009=1...

qatar2022

Dear all I have 12 pcs wireless access points in my house and i setup one of them acting as a master and the rest are slave so whatever doing changes on master it’ll change on other slaves I’m planning to change all to MikroTik cAP ac Dual-band 802.11ac Wireless Access Point (RBcAPGi-5acD2nD is this...

qatar2022

Dear all I have thus device CRS328-24P-4S+Cloud Router Switch, CRS112-8P-4S-IN Cloud Router Switch, hEX PoE RB960PGS, hEXs RB760iGShEXs RB760iGS working as a switch and all of them are connected to RB5009UG+S+ now if I make backup for all them except RB5009UG+S+ the devices not saving my backups aft...

qatar2022

Upgraded from 7.3.1 to 7.4.1 RB5009UG+S+, CRS328-24P-4S+Cloud Router Switch, CRS112-8P-4S-IN Cloud Router Switch, hEX PoE RB960PGS, hEXs RB760iGShEXs RB760iGS and chateau 5g all good no issue.

qatar2022

how to order!?!?!??!

qatar2022

Dear all
How do I prove the MAC address so that it never changes in Mikrotik? because when you open winbox you will see something like
DC:2C:6E:28:D8:C3
DC:2C:6E:28:D8:C8

with seam IP address

with regards

qatar2022

i couldn't find RB5009UPR even in your distributors and must of your distributors website not exist
any recommendation seller accept paypal?
with regards

qatar2022

no its not working bro

any idea please?

qatar2022

Hello every one
i just install VPN on my RP and i need to do port forwarding (51820) on my mikerotik device would someone please help me

Best regards

qatar2022

thank you rextended i can't ping [admin@Mikrotik hEX PoE RB960PGS] > /export show-sensitive # jul/01/2022 18:02:01 by RouterOS 7.3.1 # software id = NN9C-7X3K # # model = RB960PGS # serial number = <CENSORED> /interface bridge add name=bridge /interface list add name=WAN add name=LAN /interface wire...

qatar2022

i have the seam issue and my modem model is RM502Q-AE

qatar2022

hi erlinden

yes they have IP address and DNS and gateway and all of them have access to the internet as i said before i can watch YouTube

sorry for pictures size

qatar2022

hi to all i have MT RB960PGS and RB760iGS and all of them work as a switch and i connect my TVs on them for YouTube and IPTV and its work prefect but when i try to update them through winbox i got an error so i have to update them manually !!!! is there any missing things or an issue with device? be...

qatar2022

i also have RB4011iGS+, CRS328-24P-4S+Cloud Router Switch, CRS112-8P-4S-IN Cloud Router Switch, hEXs RB760iGS, hEX PoE RB960PGS from 7.2.3 to 7.3 is still reporting ports flaps and all of these are work as bridge only but also RB5009UG reporting ports flaps and it's connected with ISP and all other ...

qatar2022

I don't have any issue I live in QATAR and i use Vodafone operator provider

qatar2022

This happened to me too, but it started working suddenly after I disabled both the zerotier interface and the zerotier instance and then re-enabled both. Interesting. I tried that a couple times, doesn't work. Now, for the even weirder part: The only way I can get the ZT interface to come up is: - ...

qatar2022

my ZT interfaces stops passing traffic. No errors shown anyway, it silent stop working and I can’t get internet out from MT RB4011 The only way to resort from backup to let it work again
my MT router connect to Huawei N5368X 5G Outdoor CPE

qatar2022

Dear rextended

Because I install Zerotier and some time ZT stop working (I don't know way) and there is no internet the only way is to resort backup manually so this is way i ask auto resort from backup

thanks and best regards

qatar2022

Dear all

I hope anyone can help me with schedule scrip that can auto one time every day resort system from backup

qatar2022

I have the exact same issue and I can't get internet out from MT RB4011 so I have to resort from backup to let it work again
my MT router connect to Huawei N5368X 5G Outdoor CPE

qatar2022

i have the same problem with 4 of RB760iGS,RB960PGS,RB4011iGS+RM,RB5009UG+S+IN,CRS112-8P-4S-IN and CRS328-24P-4S+RM so i think it is a bug
I hope for a bugfix release asap

qatar2022

Dear all
I have Mikrotik CRS328-24P-4S+ Cloud Router Switch and I also have 12 pcs of Grandstream GWN7610 is a high-performance 802.11ac wireless access point is there any way to add them to wireless tables in Mikrotik as wifi interface

best regards

qatar2022

Dear all
i just need script to let clints mac address who's I register them in IP Binding as bypassed can only connect to MT server and block how try to connect

Best Regards to all

qatar2022

i upgrade my all mikrotik devices with 7.1.2 and 7.1.3 and a get an port flap issue so i decided to downgrade to 7.1.1 i thing 7.1.1 the most stable

qatar2022

no nothing

qatar2022

Dear Joten first of all thank you for your reply and I'm sorry I didn't know about these things when I create this firewall rules its not working i can see from log that there is more than error invalids username and one of them tried 289 time to log in to my hotspot i hope understand my point Best ...

qatar2022

If you can see it in the logs, you can make a script for it. This is nearly the same as block VPN user not authenticate correctly. See here: https://forum.mikrotik.com/viewtopic.php?t=148397 thank you Jotne for your reply i fund this script to convert ip to mac: #Hotspot IP to MAC binding# :local i...

qatar2022

Dear All

I'm still looking for script that can auto BLOCK any clints IP or MAC who try to log in to hotspot 3 time with wrong username and password
I'm not talking about SSH and TELNET because I live in crowded area

qatar2022

its work with me on my device chateau 5g

qatar2022

Are you running the CRS with SwOS or RouterOS?

RouterOS

qatar2022

Dear all i have CRS328-24P-4S+RM and i also have 12 wireless AP and 12 IP Phone i would like to assign IP and mac for each AP and IP Phone to ports that connect so NO one can disconnect one of the devices to connect pc to use internet so the port work only to the specific AP or IP Phone I hope you g...

qatar2022

That is not surprising, because the RB4011 does not have a USB port so there is nowhere you can plug the E3372 !

sorry i mean RB5009UG+S+IN

qatar2022

i have huawei e3372h-320 usb but it’s not working with RB5009UG+S+IN the router can’t see the huawei

qatar2022

Dear all I would like to thank you for your help and support for our queries and questions I finally deiced to change my network switch from cisco SG300-28PP 28-Port Gigabit PoE+ Managed Switch to MikroTik Cloud Router Switch CRS328-24P-4S+RM I bought CRS328-24P-4S+RM and I received yesterday I woul...

qatar2022

if i connect Huawei E337 to my MT and with script the user can get usernames and passwords via otp sms

qatar2022

Any update or comment please
Thanks for all

qatar2022

I don't think it has something to do with the Hardware, but with Software....

Which RouterOS are your running on your RB4011?
Still the ROS6 ?

both of them RouterOS version 7.1rc6

qatar2022

Dear All I was looking for script to auto block any client to connect to my hotspot after 3 wrong time writ username or password and at the seam time i try to search on this forum and finally i fond this https://forum.mikrotik.com/viewtopic.php?t=116498 its great script and its work with Mikrotik RB...

qatar2022

This took me a bit of time but it's solved! - First create an address list from the failed logins: /ip firewall filter add chain=input protocol=tcp src-address-list=hotspot_blacklist action=drop comment="Hotspot bruteforce prevention" add chain=output action=accept protocol=tcp content=&q...

qatar2022

up
i need this method

qatar2022

interesting

qatar2022

any ideas how to make:

1. HotSpot welcome page telling you to enter your phone number
2. You enter your phone number, press "submit"
3. You recieve sms and enter a password to a field "access code"?

qatar2022

i will try it

qatar2022

is mikrotik has a capability to auto block mac address for each user try to enter wrong coordinate (username & password) 3 times wrong so the mikrotik will block hes mac address or ip address? Where? Hotspot VPN Access to router, SSH/Telnet/Winbox/Web? PPPoE ++ For hotspot thank you Jotne

qatar2022

The Easiest Solution is to only Allow a connection to the Router via a isolated Management-Network and/or Physical-Port. If this isn't possible, you will need to jerry-rig something together... The Mikrotik-Wiki show an exemple for SSH (https://wiki.mikrotik.com/wiki/Bruteforce_login_prevention) Un...

qatar2022

Dear All
is mikrotik has a capability to auto block mac address for each user try to enter wrong coordinate (username & password) 3 times wrong so the mikrotik will block hes mac address or ip address?
if yes how to do that? is there any script
with best regards

qatar2022

I bought one more router and the behavior of the LEDs are the same. So this is normal behavior. When I unpacked the router, there was a greasy part on one side of the router. Can you tell me what that means and is it normal? By the way, I saw this on the first router also, but it was much smaller. ...

qatar2022

Change power supply to 48V 3amp and all port will work poe

qatar2022

Hi, i reseted my router but I cant configure it how it was. The router wasnt mine and i didnt have credentials to it. My ISP only told me to set it to static IP and provided me with IP, gateway, DNS. I tried the "Quick set" thing but there are 4 modes and i have no idea which one i should...

qatar2022

You will need a DHCP-Server active on the Bridge. -> Lot of Video's and Forum-Post about it.. but If you still need help setting it up, please post the config of the Mikrotik device /export hide-sensitive file=anynameyouwish thank you m8 this is what im talking about https://forum.mikrotik.com/view...

qatar2022

I don't understand your Question.... you want to dynamically assign an IP-Address to all Devices connected to your RB4011iGS+ ? or do you want to dynamically assign an IP-Address to the RB4011iGS+ ? or do you mean something else ? hi @connyMercier yes i want dynamically assign an IP-Address to all ...

qatar2022

dear all
I would like to signed IP address for each port of RB4011iGS+ instead to make static IP address for each devices is there any help or advice ?
best regards

qatar2022

Hotspot-Feature or do you mean Wireless-AP ?

thank you for your help and reply
for Hotspot-Feature please
thanks again

qatar2022

dear all
is there any script to auto block any device whose trying to connect to my hotspot without authorized by username and password or who didn’t assigned his mac address on ip bindings by myself

best regards

qatar2022

I was experiencing a slow internet connection as my Internet speed is up to 500 Mega and when using RB4011iGS+ device and on Port 1(WAN) the speed was not more than 100 Mbps but when I changed the port1 to Port10 as WAN and the speed became 480MB is this a defect in Port 1 so that the speed does not...

qatar2022

I just received my RB5009, and it comes with 7.0.5 RouterOS.. when it checks for upate, it says latest stable version is 6.48.4 !

where did you buy your device? i couldn't find it

qatar2022

thanks for all but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working...

qatar2022

thanks for all but i don’t think to change from cisco to mikrotik switch because i have hEX PoE port 2 to 5 poe out and hEX S port 5 poe out but none of them are really providing poe out i’ve test the with ip phone and AP both of them are support poe and when i connect them none of them are working ...

qatar2022

i try it and worked perfectly

qatar2022

many thanks, worked perfectly for me as well

qatar2022

qatar2022 write thanks bro for this information but is there any command to enabled SA only /interface lte at-chat lte1 input="AT+QNWPREFCFG=\"mode_pref\",NR5G" ; /interface lte at-chat lte1 input="AT+QNWPREFCFG=\"nr5g_disable_mode\",2" ; ٍSorry SIB it not wo...

qatar2022

hi to all

I have RB4011iGS+RM witch connecting to HUAWEI 5G CPE OUTDOOR N5368X and the huawei has a capabilities to send and received SMS is there any script to send received sms via mikrotik because mikrotik has only serial or USB to send sms over Ethernet port

with regards

qatar2022

hi all

is there any plan to let chateau 5G support Arabic language to read arabic sms?

qatar2022

3.1.4. AT+QNWPREFCFG="mode_pref" Network Search Mode Configuration Options: AUTO WCDMA & LTE & 5G NR WCDMA WCDMA only LTE LTE only NR5G 5G NR only Examples: /interface lte at-chat lte1 input="AT+QNWPREFCFG=\"mode_pref\"" ; # Query the current configuration. +QN...

qatar2022

sorry for a bit offtopic, but will this Chateau 5g modem work with 5G only enabled? or they need 4G too to work?

it will not work with 5G only you havr yo active 4G & 5G sorry it’s not like huawei 5G CPE outdoor N5368X you can choose SA only 5G

qatar2022

hi all
i need to buy one but i don’t know wher trust website with reasonable price

qatar2022

qatar2022 i swap antenna cable Chateau 5G have MIMO 8x8 means we use 8x u.FL Antennas ! What antenna you swap ? Your URL not work. In MIMI 8x8 exist some new problems, we not have a Main/Div antenna and second one MIMO Main/Div but ... LTE Modules have each Ant0 port with differ Bands/Frequency and...

qatar2022

Hi all

i swap antenna cable
befor

after

qatar2022

thanks toxicfusion for your reply
the reason that i want to change cisco because i cut off the power from cisco during update process and now it’s not working anymore this way and the dealer can’t repair it
with regards

qatar2022

Dear all
I'm planning to change my cisco Switch SG300-28PP 28-Port Gigabit PoE+ Managed Switch to MikroTik Switch at least 26 port PoE+ but with seam cisco specs because all Wi-Fi AP, phone,PBX and security cameras work with PoE+

any recommendation from you

With Regards

qatar2022

The firmware upgrade command is now working on my Chateau 5G, at least for me: Chateau 5G firmware update working.png Unfortunately, this new version does seem to want to connect in 3CA for me or very briefly. :? With the 11.03 version, it consistently connected in B20+B1+B3, using B20 as the prima...

qatar2022

Dear all
my MK RB4011iGS+RM doesn't have USB port can i use my WD NAS my cloud ex2 ultra witch already connect to MK router to save Logs to WD NAS SERVER?

qatar2022

Dear all I just bought RB4011iGS+RM and i notes that the device has SFP+ ports and i have Cisco SG300-28P 28-Port Gigabit PoE Managed Switch https://www.cisco.com/c/dam/en/us/support/docs/SWTG/ProductImages/Switches-SG300-28P_frnt_rt-1000.jpg https://www.cisco.com/c/dam/en/us/products/collateral/int...

qatar2022

hi everyone
on chateau 5g how i i can change 5g band from NSA to SA? and is there any option to change antenna from internal to external that’s comes with device?
with regards

qatar2022

Hello. Today I received my mikrotik chateau 5G, and when i try to update it after reboot it will not boot. So I made a reset After reboot i goot a boot loop So I tried with netinstall, and I have a problem - but I cannot install the firmware - it shows purple led I tried to install different version...

qatar2022

thank you for your help
i bought one from wifi-stock
with regards

qatar2022

where did you buy chatea 5g?
thanks

qatar2022

thank you sob
what i want to connect and access to my server and router and my pbx out side house through my mobile and ddns on mikrotik chateau lte 12
this is my issue with thid router
thanks again

qatar2022

my mikrotik ip:192.168.8.5
my switch cisco sg300-28port gigabit poe ip: 192.168.8.2
my pbx grandstream ucm6102 ip:192.168.8.25
my ip phone from grandstream is:192.168.8.26-192.168.8.38
my wifi linksys lapn300 ip is:102.168.8.6-192.168.8.12

qatar2022

Dear all since i install UCM 6102 and over 10 phone devices from grandstream and because i don’t have landline or faiber optics i my service provider install 5G GSM router from huawei and then i decided to use GSWave without seccessful because i don’t have static ip it’s GSM network so many peoples ...

qatar2022

me too

Search found 163 matches