Community discussions

MikroTik App

Search found 19 matches

by dhelazt
Wed Apr 14, 2021 7:08 am
Forum: General
Topic: Tagging Untagged VLAN From Other Devices
Replies: 6
Views: 583

Re: Tagging Untagged VLAN From Other Devices

Untitled.png
This my current setup, both Internet & IP TV connection from modem and it doesn't have any VLAN tagging. I can't change anything on modem because it from my ISP.
I'm looking for any possibility to tag connection from IP TV and pass it to HAP Lite with my Internet.
by dhelazt
Sat Apr 10, 2021 7:17 am
Forum: General
Topic: Tagging Untagged VLAN From Other Devices
Replies: 6
Views: 583

Re: Tagging Untagged VLAN From Other Devices

The problem is my IP TV is Untagged VLAN, it will detected as VLAN 1 by Router and we know VLAN 1 is default VLAN for all port on MT. So, i want to Tag it with VLAN ( Ex. VLAN 100) and pass it to another router.
by dhelazt
Fri Apr 09, 2021 3:37 pm
Forum: General
Topic: Tagging Untagged VLAN From Other Devices
Replies: 6
Views: 583

Tagging Untagged VLAN From Other Devices

I just move to new home, installed existing devices from my old home and everything is worked. Then i realize i need to connect my STB to number 4 Eth on my Modem. The problem is my modem located on my office and STB on living room. Both devices separated by another room and only 1 Cat 5E connected ...
by dhelazt
Tue Apr 06, 2021 10:46 am
Forum: RouterBOARD hardware
Topic: Replace FLASH on HAP & HEX with larger capacity
Replies: 3
Views: 559

Re: Replace FLASH on HAP & HEX with larger capacity

HAP AC3 currently out of stock at Indonesia when i bought AC2, until today only Pre-Ordered is available to purchase AC3 from local distributor. I looking for cheap solution for upgrading Flash on HEX or HAP series router i have in my office. Maybe i can make them useful by upgrading the Flash memory.
by dhelazt
Tue Apr 06, 2021 5:43 am
Forum: RouterBOARD hardware
Topic: Replace FLASH on HAP & HEX with larger capacity
Replies: 3
Views: 559

Replace FLASH on HAP & HEX with larger capacity

Hi, i have many HAP & HEX in my office after replacing router on our client. Most client required quite lot service where HAP/HEX didn't have enough space to accomodate all required extra packages we need. So, we replaced them with old RB951 or even upgrade them to 2011/3011 series. Then, i'm th...
by dhelazt
Fri Nov 06, 2020 6:57 pm
Forum: The User Manager
Topic: Need Suggestion Regarding Single User Manager With Multiple MT
Replies: 0
Views: 437

Need Suggestion Regarding Single User Manager With Multiple MT

I need suggestion about implementing single usermanager with multiple router run hotspot. My topology : Untitled.png Everything is working, all router ( R2 & R3 ) controlled by R1 which is L5 MT and i can see active session from R2 & R3. But, there are several problem i can't solve. 1. I lim...
by dhelazt
Fri Oct 30, 2020 12:44 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

UPDATE! Just received 2 used mini PCI, R52 and PW-MN561 (120mW, G/N ). Test both card with RB411AH and same configuration with XR2, the result: 1. R52 ( B/G ) WLAN1 connected to CPE220 ( B/G/N ), but client can't connect to R52 WLAN2. 2. R52 ( B/G ) WLAN1 connected to CPE220 ( B/G ), but client can'...
by dhelazt
Tue Oct 27, 2020 1:40 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

I just tried to connect to RB411 to RB951 and Groove, both using WPA2-PSK security and same problem still exist. Downgrade to 6.45.9 not solve the issue, all device failed to connect to WLAN2 even if WLAN1 has connected, get an IP and connected to internet. I just ordered another MiniPCI and RB to c...
by dhelazt
Mon Oct 26, 2020 3:40 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

In case it has problem with space and another character, i changed SSID to Private2. 1. Connect to Private2 /interface wireless registration print stats 0 interface=wlan1 mac-address=DE:07:B6:D0:33:40 ap=yes wds=no bridge=no rx-rate="48Mbps" tx-rate="36Mbps" packets=114,207 bytes...
by dhelazt
Sun Oct 25, 2020 3:09 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

I will explain more detailed about my network, because now i'm a little bit confused. Untitled.png - CPE220 has 2 SSID, first is [ Public ] which is connected to VLAN 20 to RB951, second is [ Private2 ] which is connected to VLAN 21 to RB951 and it has WPA2-PSK security. - I set RB411AH WLAN1 connec...
by dhelazt
Sat Oct 24, 2020 4:10 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

Just tried several option, but still not work. Even tried to reset several time, but no luck. Capture.PNG As we can see, RB411AH WLAN1 is connected to CPE220 with Private2 SSID successfully. I can connect to internet or ping another subnet on CPE220 network. But WLAN2 is fail to accept any connectio...
by dhelazt
Fri Oct 23, 2020 6:01 am
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

1. Yes, RB411 can connect to internet, i can ping google, my modem IP address or sync time using SNTP. 2. Log show nothing, all devices tried to connect to WLAN2 only show "Cannot Connect To <SSID>" and MT not showing any information. 3. Disabled radius not solving the problem. I think the...
by dhelazt
Thu Oct 22, 2020 6:38 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Re: Problem with single Wireless Interface as Station & AP

Everything like your suggestion, RB411AH can connect to internet via WLAN1, hotspot run on WLAN2 including DHCP Server. The only thing i didn't understand is, i can't connect to WLAN2 ( tried with Phone, Laptop, and PC ) if WLAN1 connected to secured SSID/AP ( WPA2-AES ). I can connect to WLAN2 if W...
by dhelazt
Thu Oct 22, 2020 4:45 pm
Forum: Wireless Networking
Topic: Problem with single Wireless Interface as Station & AP
Replies: 13
Views: 1223

Problem with single Wireless Interface as Station & AP

Sorry if the subject a little bit weird. Untitled.png I have RB411AH + XR2 Card configured as Station (wlan1) and AP (wlan2 / VAP), then i connect wlan1 to CPE220 configured with WPA2 security. Both device connected and can share internet. The problem is no device can connect to wlan2 ( AP ), then i...
by dhelazt
Mon Sep 28, 2020 11:42 am
Forum: Wireless Networking
Topic: Need Suggestion Regarding Extend Hotspot [SOLVED]
Replies: 6
Views: 652

Re: Need Suggestion Regarding Extend Hotspot [SOLVED]

Or you could indeed have the hotspot in that 2nd Groove and then NAT-masquerade the different users, then there is only one MAC and only one IP connecting via the TP-link to the RB951. I think i will use this solution because it's cheaper and easier to maintain compare with other solution i planned.
by dhelazt
Mon Sep 28, 2020 5:48 am
Forum: Wireless Networking
Topic: Need Suggestion Regarding Extend Hotspot [SOLVED]
Replies: 6
Views: 652

Re: Need Suggestion Regarding Extend Hotspot [SOLVED]

Yes, only for extending hotspot. Another plan is connect 2nd Groove to CPE220 and manage hotspot directly on 2nd Groove with RADIUS, so i can control user login from RB951. The only thing i'm not sure about is, use pysical (wlan1) on Groove to CPE220 and create another virtual AP for hotspot using W...
by dhelazt
Sun Sep 27, 2020 5:09 pm
Forum: Wireless Networking
Topic: Need Suggestion Regarding Extend Hotspot [SOLVED]
Replies: 6
Views: 652

Re: Need Suggestion Regarding Extend Hotspot [SOLVED]

I only need to cover several home ( 3 - 5 ) with very small distance between them and around 5 - 10 peoples, most of them using android smartphones. I have 20Mb/s bandwidth from my ISP, each user has max. bandwidth of 1MB/s ( limited by hotspot profile ). I have a plan, but not tested it yet: Untitl...
by dhelazt
Sun Sep 27, 2020 3:12 pm
Forum: Wireless Networking
Topic: Need Suggestion Regarding Extend Hotspot [SOLVED]
Replies: 6
Views: 652

Need Suggestion Regarding Extend Hotspot [SOLVED]

Hello, my name is Fajar from Indonesia. I'm just setup a small hotspot service in my village after Covid19 pandemic, my current topology : Untitled.png /interface print Flags: D - dynamic, X - disabled, R - running, S - slave # NAME TYPE ACTUAL-MTU L2MTU MAX-L2MTU MAC-ADDRESS 0 R ether1 ether 1500 1...
by dhelazt
Fri Aug 28, 2020 12:39 pm
Forum: RouterBOARD hardware
Topic: RB750r2 Led Blink Speed
Replies: 0
Views: 692

RB750r2 Led Blink Speed

I have several Mikrotik in my office, like RB2011, RB3011, CCR1009 & RB941 with fast Led blinking when there is traffic on the interface. Then i bought RB750r2, i found the Led flashing speed is too slow, i think it flash every 2 second. For me it to slow to indicate interface activity, is it po...