Community discussions

MikroTik App

Search found 79 matches

by teleport
Mon Oct 28, 2024 6:08 pm
Forum: General
Topic: using public/private keys for sftp [SOLVED]
Replies: 3
Views: 901

Re: using public/private keys for sftp [SOLVED]

Hi I am glad you could solve it how? I am trying SFTP with keys between two Miltrotiks with no luck. I can do it with user password. And I can SSH with keys to the Tiks. #create keys in Linux ssh-keygen -t ed25519 -f id_ed25519 -N "" mv id_ed25519 id_ed25519.pem SERVER scp -P 22222 id_ed2...
by teleport
Fri Oct 11, 2024 6:05 am
Forum: General
Topic: using public/private keys for sftp [SOLVED]
Replies: 3
Views: 901

Re: using public/private keys for sftp [SOLVED]

just checked myself. works with key authentication too. marking as solved
by teleport
Thu Oct 10, 2024 10:54 pm
Forum: General
Topic: using public/private keys for sftp [SOLVED]
Replies: 3
Views: 901

using public/private keys for sftp [SOLVED]

i have a working sftp command to upload file to remote openwrt dumbAP. is it possible to use public/private(ssh) keys for below command instead of username/password. if yes, please provide example (am already aware of standard steps for ssh key generation and adding private key using /user). does be...
by teleport
Sun Oct 06, 2024 7:19 am
Forum: General
Topic: wireguard problem with a v 7.14
Replies: 29
Views: 7137

Re: wireguard problem with a v 7.14

have identified an issue with wireguard handshakes (Even on latest version as of today 7.16) and sent details to support. no response yet. the issue is: when wireguard tunnels are setup. seems like wireguard remembers the gateway used and uses it for handshakes. and when it changes, it goes into a t...
by teleport
Wed Oct 02, 2024 4:23 pm
Forum: General
Topic: Wireguard on standalone server with mikrotik router
Replies: 2
Views: 314

Wireguard on standalone server with mikrotik router

here is my current setup: have wireguard 'client' on mikrotik router configured (configure peer using VPN provider) and i use it to direct traffic of my VLANs to the wireguard using routing rules. would like to move wireguard to a separate machine on LAN(router struggles at vpn traffic beyond 260Mbp...
by teleport
Wed Oct 02, 2024 4:09 pm
Forum: General
Topic: ROS Scripting question
Replies: 6
Views: 543

Re: ROS Scripting question

Thanks Amm0. the easy solve without much code change was to change to
:local config [:pick $interfaceConfigs $i] and everything works
understand your point of lists vs name-value pairs. will keep in mind next time
by teleport
Wed Oct 02, 2024 3:54 am
Forum: General
Topic: ROS Scripting question
Replies: 6
Views: 543

ROS Scripting question

# Define settings for interfaces :local interfaceConfigs { {"P_NEW_WG_3_NS2"; 52821; "2"; "interfacekey1"; "TX100"; "10.3.0.0"; "10.3.0.2"; "TX100"; "ip1"; "10.3.0.1"; "10.7.0.1"; "peerkey1"...
by teleport
Mon Sep 30, 2024 8:11 am
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 156413

Re: v7.17beta [testing] is released!

Something strange happens with wireguard. Only 2 of 5 wireguard peer connections connects. Copy paste keys from scratch but no connection at all have seen that happen especially when wan dhcp renews and my wireguard connections freak out and some will not connect again. no amount of disable/enable ...
by teleport
Fri Sep 20, 2024 11:59 pm
Forum: General
Topic: wireguard problem with a v 7.14
Replies: 29
Views: 7137

Re: wireguard problem with a v 7.14

had same issue and was struggling in 7.15.3 and the latest 7.16 beta. frustrated, tried deleting and recreating interface (and recreated peer- not sure if this was necessary) and it took care of the problem. EDIT: still have the problem after a day of it working correctly. all wireguard tunnels went...
by teleport
Mon Sep 16, 2024 11:47 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1558
Views: 380244

Re: 📣 WinBox 4 is here 📣

new winbox 4 on linux issue: seems to resurface old 'Option sets' in ip->DHCP Server->Network screen and leases screen for no reason. even after deleting and saving, it still keeps it and does not want to delete it(when checked again). this is causing havoc in my network clients(took a long time to...
by teleport
Fri Sep 13, 2024 9:41 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1558
Views: 380244

Re: 📣 WinBox 4 is here 📣

What's new in v4.0beta6: *) minor UI improvements What's new in v4.0beta5: *) return tab based interace, while keeping benefits of dropdowns *) move action buttons into table toolbar *) change style for active sub window *) fix macOS self-update on some systems *) stability improvements please fix ...
by teleport
Tue Sep 10, 2024 5:27 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1558
Views: 380244

Re: 📣 WinBox 4 is here 📣

new winbox 4 on linux issue: seems to resurface old 'Option sets' in ip->DHCP Server->Network screen and leases screen for no reason. even after deleting and saving, it still keeps it and does not want to delete it(when checked again). this is causing havoc in my network clients(took a long time to ...
by teleport
Sat Jul 13, 2024 9:20 pm
Forum: Beginner Basics
Topic: Wireguard no handshake on iOS
Replies: 4
Views: 1337

Re: Wireguard no handshake on iOS

where is your input firewall rule that accepts udp requests on wireguard port 13231?
also include wireguard interface in LAN interface list for seamless firewall navigation
by teleport
Sun Jul 07, 2024 6:06 am
Forum: Containers
Topic: The complete SSDP + mDNS solution for network segmentation
Replies: 32
Views: 22051

Re: The complete SSDP + mDNS solution for network segmentation

Help! :) Still can't get it to load the container.... I run the script with the following: :local tag "ghcr.io/nberlee/bonjour-reflector:main"; :local interface "veth1-reflector"; :local containerLogging "yes"; :local mount "reflector-config"; :local rootdir ...
by teleport
Fri Jul 05, 2024 3:54 am
Forum: General
Topic: Firewall (7.15.1): usage of src-addr-type in firewall rule and its dependency with dst-addr-type parameter
Replies: 0
Views: 925

Firewall (7.15.1): usage of src-addr-type in firewall rule and its dependency with dst-addr-type parameter

Version 7.15.1 RB450GX4 Issue: have a NAT dstnat rule where src-addr-type=unicast and dst-addr-type not set(along with other interface/address list based criteria). what i noticed is that, no packets are captured as part of the rule. to verify where the issue is, i did the following: a) removed src-...
by teleport
Fri Jul 05, 2024 12:23 am
Forum: General
Topic: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]
Replies: 10
Views: 2852

Re: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]

here is solution: IOS needs hostname resolution to an IP to determine whether to send traffic via tunnel's allowedip address when a subset of traffic(non 0.0.0.0/0 scenarios) is passed to tunnel (in certain quirky scenarios). provide a DNS resolution of hostname that resolves to an address that is p...
by teleport
Mon Jun 10, 2024 11:58 pm
Forum: General
Topic: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]
Replies: 10
Views: 2852

Re: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]

Well to be honest I have always ONLY stuck in 0.0.0.0/0 for allowed IPs on my iphone wg setup, as being the admin I have many subnets I may wish to access, and perhaps even the internet. So you are saying that If only put a LAN that exists on the router in my allowed IPs and then I try to reach an ...
by teleport
Thu Jun 06, 2024 6:28 am
Forum: General
Topic: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]
Replies: 10
Views: 2852

Re: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]

You are mixing apples and Oranges, what is controllable is whether or not your traffic can be split. The answer is NO. Disagree. once you put *only* homelan address in allowedipaddress-while on cellular, goto ip.me . you should see your wireless ISP details there. got to some homelan URL. you shoul...
by teleport
Wed Jun 05, 2024 11:39 pm
Forum: General
Topic: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]
Replies: 10
Views: 2852

Re: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]

explanation of setup: a) wireguard 'server' on home router(mikrotik) setup fine. b) wireguard IOS app(allowed ip=0.0.0.0/0) can connect to the wireguard 'server'(peer allowedip=wireguard ios client interface ip). checked accessing lan devices and internet using Iphone IOS browser. everything works f...
by teleport
Wed Jun 05, 2024 8:20 am
Forum: General
Topic: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]
Replies: 10
Views: 2852

Re: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]

The login works fine from the app when I use it. Are you attempting winbox or something else. On the Router you need to allow the wireguard IP to the input chain. For address just use MT wireguard IP : winboxport - not winbox. mikrotik IOS app - wireguard on RouterOS is not a problem. as mentioned,...
by teleport
Tue Jun 04, 2024 9:43 pm
Forum: General
Topic: Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]
Replies: 10
Views: 2852

Mikrotik IOS app login. networks to be added to allowed address in wireguard app [SOLVED]

in a road warrior setup, where i use Mirkotik IOS app to connect to home network over wireguard (using wireguard app on-demand setup to include homelan network as part of allowed address) , i see that i cannot login (webfig login works). when allowed address is changed to 0.0.0.0/0. it works fine. a...
by teleport
Mon May 06, 2024 8:22 am
Forum: General
Topic: Mikrotik ControlD container config issue arm32
Replies: 3
Views: 525

Re: Mikrotik ControlD container config issue arm32

am having issues though reaching the container that has controld running(veth port to a controldbridge) from my main vlan aware(bridge vlan filtering enabled) bridge where my devices are. ping from devices on my main bridge cannot reach the ip of veth (while i can ping it using tools->ping). any hel...
by teleport
Mon May 06, 2024 8:02 am
Forum: General
Topic: Mikrotik ControlD container config issue arm32
Replies: 3
Views: 525

Re: Mikrotik ControlD container config issue arm32

here is a way to get past controld arm docker image issue, build image yourself. on a linux box: cd github git clone https://github.com/Control-D-Inc/ctrld.git cd ctrld; env GOOS=linux GOARCH=arm go build -a -gcflags="all=-l -B" -ldflags="-w -s" ./cmd/ctrld cd .. docker run --pri...
by teleport
Tue Mar 26, 2024 2:46 pm
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Re: Homeassistant as container and homekitbridge setup

thanks Amm0/tangent for your replies.
by teleport
Sat Mar 23, 2024 6:28 am
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Re: Homeassistant as container and homekitbridge setup

i was able to configure it with bridge vlan filtering on main bridge and get it to work. Hardware offload turned off. switching speeds(same vlan iperf) dropped from about 950 to 880 Mb/sec .Routing speeds (Across vlan iperf) remains the same ~740 Mbps(as expected). for VETH-ha, had to make pvid=<iot...
by teleport
Fri Mar 22, 2024 2:57 am
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Re: Homeassistant as container and homekitbridge setup

here is support response till now and my response back to them: Support: *** /container mounts add dst=/config name=ha_config src=/usb1/ha_config /interface bridge add admin-mac=78:9A:18:A9:E8:C7 auto-mac=no comment=defconf name=bridge port-cost-mode=\ short add name=ha vlan-filtering=yes /interface...
by teleport
Thu Mar 21, 2024 4:39 pm
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Re: Homeassistant as container and homekitbridge setup

You can treat VETH the same as a ether1 etc ports. So it can use in your "main" (or only) bridge, and using vlan-filtering=yes. Possible to make a trunk (e.g. /interface/bridge/vlans as a tagged=), or, an access or hybrid port by setting a PVID etc. The same as any other ethernet port liv...
by teleport
Thu Mar 21, 2024 4:18 am
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Re: Homeassistant as container and homekitbridge setup

have requested support to provide sample configuration for vlan aware veth ports in a single bridge configuration with multiple vlans (from homeautomation perspective even the matter server is expected to be on same network as ha/devices)
by teleport
Tue Mar 19, 2024 8:31 am
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Re: Homeassistant as container and homekitbridge setup

Put the VETH on the bridge . if main bridge had VLANs(each serving to clients with its own DHCP server), then just assigning an unused address from any of the VLAN (specifically that would have homekit devices) work? i remember trying this and it did not (meaning, it was not reachable via http://<i...
by teleport
Tue Mar 19, 2024 5:07 am
Forum: Containers
Topic: Homeassistant as container and homekitbridge setup
Replies: 14
Views: 6002

Homeassistant as container and homekitbridge setup

followed below instruction for setup of homeassistant: https://help.mikrotik.com/docs/display/ROS/Container+-+HomeAssistant with above, am unable to add homekitbridge to IOS as an accessory (Since they reside on different Networks. HA on its own bridge/ip based on above instruction and homelan devic...
by teleport
Fri Mar 15, 2024 3:09 pm
Forum: Beginner Basics
Topic: Docker - pihole
Replies: 33
Views: 14110

Re: Docker - pihole

Hi All, I had a RPi4 Pihole for a couple year perfectly working and heard of the possibility to configure a Pihole container into my RB5009 so I decided to give it a try. I'll avoid for now to fill this message with all the ROS configuration, maybe I could post it later if something punctual is nee...
by teleport
Thu Feb 15, 2024 10:14 pm
Forum: Containers
Topic: The complete SSDP + mDNS solution for network segmentation
Replies: 32
Views: 22051

Re: The complete SSDP + mDNS solution for network segmentation

have noticed that applehomekit has quirky behavior especially when you roam from wifi to cellular and back to same wifi (with vpn like protonvpn always enabled/on). it does not work correctly when you roam and come back to same wifi (on IOS)
by teleport
Thu Feb 15, 2024 3:06 am
Forum: Containers
Topic: The complete SSDP + mDNS solution for network segmentation
Replies: 32
Views: 22051

Re: The complete SSDP + mDNS solution for network segmentation

while the above setup works with different vlans setup on the router, was wondering how to get it to work when router has wireguard enabled and me as road-warrior would like to use homekit (with an iphone) when connecting via wireguard from outside home.
by teleport
Tue Feb 13, 2024 12:50 am
Forum: Containers
Topic: The complete SSDP + mDNS solution for network segmentation
Replies: 32
Views: 22051

Re: The complete SSDP + mDNS solution for network segmentation

Add veth1-reflector as tagged port to the vlans you want to use. Change the bridge to your bridge and vlan-ids to the vlans you want to use. Please note, these commands open an editor, to save the changes press ctrl+o to exit the editor. Interfaces are comma separated, so if you want to add multipl...
by teleport
Sun Dec 03, 2023 9:11 pm
Forum: Announcements
Topic: v7.13rc [testing] is released!
Replies: 177
Views: 56938

Re: v7.13rc [testing] is released!

heavy memory leak on the rc2 on rb450gx4. within 4 hours, 1gb ram became 450MB available (from typical 920MB available)
by teleport
Fri Jun 16, 2023 4:50 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 366
Views: 139047

Re: v7.10 [stable] is released!

SSH client seems a bit broken. I use the mikrotik as a client to connect to something like a UniFi - it attempts a connection but it immediately quits. It doesn't get as far as asking for a login or password. It works in 7.7 Edit: also works ok in 7.10rc1 refer https://forum.mikrotik.com/viewtopic....
by teleport
Thu Jun 15, 2023 11:03 pm
Forum: Announcements
Topic: v7.10, 7.10.1 and more [stable] are released!
Replies: 366
Views: 139047

Re: v7.10 [stable] is released!

RouterOS version 7.10 has been released in the "v7 stable" channel! Before an upgrade: 1) Remember to make backup/export files before an upgrade and save them on another storage device; 2) Make sure the device will not lose power during upgrade process; 3) Device has enough free storage s...
by teleport
Thu Jun 15, 2023 10:59 pm
Forum: Beginner Basics
Topic: logging with ssh public key
Replies: 10
Views: 7710

Re: logging with ssh public key

The issue has been identified, and we look forward to fixing it on upcoming RouterOS versions above is not fixed in 7.10rc6 (where it is mentioned as fixed). still get same 'authentication failure' when accessing remote SSH host as ssh-exec and 'welcome back' message as ssh. works fine when tried f...
by teleport
Thu Jun 15, 2023 3:30 am
Forum: Beginner Basics
Topic: logging with ssh public key
Replies: 10
Views: 7710

Re: logging with ssh public key

The issue has been identified, and we look forward to fixing it on upcoming RouterOS versions above is not fixed in 7.10rc6 (where it is mentioned as fixed). still get same 'authentication failure' when accessing remote SSH host as ssh-exec and 'welcome back' message as ssh. works fine when tried f...
by teleport
Thu Jun 15, 2023 3:28 am
Forum: Announcements
Topic: v7.10rc is released!
Replies: 183
Views: 58259

Re: v7.10rc is released!

What's new in 7.10rc6 (2023-Jun-13 10:52): *) ssh - fixed RouterOS SSH client login when using a key (introduced in v7.9); above is not fixed in 7.10rc6. still get same 'authentication failure' when accessing remote SSH host as ssh-exec and 'welcome back' message as ssh. works fine when tried from ...
by teleport
Fri Jun 02, 2023 1:46 pm
Forum: Beginner Basics
Topic: logging with ssh public key
Replies: 10
Views: 7710

Re: logging with ssh public key

Hello, I also have a problem with login by SSH public key. [geadmin@rtr.lesko-ing.com.pl] > /system/ssh-exec user=geadmin address=192.168.40.3 command="/system/resource/print" failure: authentication failure On the same key I can login from linux without any problem. So problem exist betw...
by teleport
Thu Jun 01, 2023 10:34 pm
Forum: Announcements
Topic: v7.9.2 [stable] is released!
Replies: 72
Views: 28863

Re: v7.9.2 [stable] is released!

- 1 x RB450Gx4 that after the upgrade never came back online (it's 30 KM away from where I am) The RB450G was born with v6.x, why was there a need to put v7? in my case, reason i got RB450GX4 few years back was because v7 would first be supported for ARM. all stable 7.x has been good on my RB450GX4...
by teleport
Thu Jun 01, 2023 10:29 pm
Forum: Announcements
Topic: v7.9.2 [stable] is released!
Replies: 72
Views: 28863

Re: v7.9.2 [stable] is released!

I had issues with:
- 1 x RB450Gx4 that after the upgrade never came back online (it's 30 KM away from where I am)
Respectfully disagree. i have upgraded RB450Gx4 without issues. used the IOS app to trigger upgrade in my case (home setup).
by teleport
Thu Jan 19, 2023 4:17 pm
Forum: General
Topic: Mikrotik WireGuard setup for Protone VPN
Replies: 18
Views: 6824

Re: Mikrotik WireGuard setup for Protone VPN

Does proton provide a private key for you to use in the WG interface? If not, then proton will need the public key generated by the private key provided by the MT router. yes proton provides private key.here is sample information generated from protonVPN: [Interface] # Bouncing = 0 # NetShield = 2 ...
by teleport
Thu Jan 19, 2023 4:48 am
Forum: General
Topic: Mikrotik WireGuard setup for Protone VPN
Replies: 18
Views: 6824

Re: Mikrotik WireGuard setup for Protone VPN

Command line: Setup Interface /interface/wireguard/add name=protonwg00 private-key="<private Key>" comment="ProtonVPN interface" Add peer /interface/wireguard/peers/add endpoint-address=<IP> endpoint-port=51820 public-key="<public_key>" allowed-address=0.0.0.0/0 interfa...
by teleport
Fri Jul 29, 2022 9:28 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

recent one RB260GS(CSS106-5G-1S) which supports up to SwOS 2.13 Issue Resolved: From Support: It is related to RSTP. The RB450Gx4 with HW offloaded bridge and configured VLANs on the switch menus tags RSTP BPDUs from CSS106. These tagged BPDUs are received on the CPU and they should be ignored base...
by teleport
Thu Jul 28, 2022 7:00 am
Forum: RouterBOARD hardware
Topic: Mikrotik ProtonVPN Wireguard Setup
Replies: 2
Views: 2328

Re: Mikrotik ProtonVPN Wireguard Setup

Update: Removed all mangle rules. made only changes in /routing/rules. (3 Vlans total and 2 of them go through protonVPN) for DNS: made NAT setting to forward DNS traffic to protonVPN DNS for the 2 VLan's Question: 1.how important is changeMSS for protonVPN. have skipped that setting(as i have remo...
by teleport
Mon Jul 25, 2022 7:07 am
Forum: General
Topic: FastTrack Causing Slow HTTPS Loads
Replies: 19
Views: 7295

Re: FastTrack Causing Slow HTTPS Loads

I had thought it would be: 1, 2, 7, 8, 3, 4 Such that once line 8 matches, it would return, and the "passthrough=yes" from line 8 applied to the behavior of the jump action in line 2, thus continuing to lines 3 and 4. But if I understand what you're saying, it should be: 1, 2, 7, 8, 9, 10...
by teleport
Sun Jul 24, 2022 12:11 am
Forum: RouterBOARD hardware
Topic: Mikrotik ProtonVPN Wireguard Setup
Replies: 2
Views: 2328

Re: Mikrotik ProtonVPN Wireguard Setup

Here is a working setup. please comment on shortcomings/optimizations/embedded questions. Route all internet traffic through a VPN server Enter the following in the command line (hitting enter after each line): /ip firewall address-list add address=192.168.88.0/24 list=under_protonvpn Above line No...
by teleport
Tue Jul 19, 2022 10:25 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

have you discarded STP/RSTP issues? which version of SwOS are you using? is OLD RB260GS which supports only up to SwOS 1.7 or the later version RB260GS(CSS106-5G-1S) which supports up to SwOS 2.13 ? recent one RB260GS(CSS106-5G-1S) which supports up to SwOS 2.13 Issue Resolved: From Support: It is ...
by teleport
Sun Jul 17, 2022 9:55 pm
Forum: RouterBOARD hardware
Topic: Mikrotik ProtonVPN Wireguard Setup
Replies: 2
Views: 2328

Mikrotik ProtonVPN Wireguard Setup

Hello: protonvpn has provided steps to configure Mikrotik for wireguard. https://protonvpn.com/support/wireguard-mikrotik-routers/ Question: 1. if i have multiple VLAN's and i want only one of them to access internet using ProtonVPN, how would the instructions change? --especially around DNS where i...
by teleport
Fri Jul 15, 2022 6:47 am
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

have you discarded STP/RSTP issues? which version of SwOS are you using?

is OLD RB260GS which supports only up to SwOS 1.7 or the later version RB260GS(CSS106-5G-1S) which supports up to SwOS 2.13 ?
recent one RB260GS(CSS106-5G-1S) which supports up to SwOS 2.13
by teleport
Fri Jul 15, 2022 4:28 am
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

did that too on 74beta5. issue still persists.support has been given supout.rif even on latest beta (beta5) can someone acknowledge that they have also run into same issue(even in latest bets5/rc2). am having hard time convincing support something that is easily reproducible. works fine with defaul...
by teleport
Tue Jul 12, 2022 11:21 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

From ROS 7.4beta5 change log: So maybe you can upgrade your RB450Gx4 to latest beta and see if things got any better? did that too on 74beta5. issue still persists.support has been given supout.rif even on latest beta (beta5) can someone acknowledge that they have also run into same issue(even in l...
by teleport
Thu Jul 07, 2022 2:23 am
Forum: Announcements
Topic: v7.4rc is released!
Replies: 116
Views: 32852

Re: v7.4rc1 is released!

DHCP Regression issue from 7.3 and above. support acknowledges(SUP-85542) but fails to provide information as to which release it would be fixed.

viewtopic.php?t=187080
by teleport
Thu Jun 30, 2022 3:21 am
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

From ROS 7.4beta5 change log: *) dhcpv4-server - placed option 53 as the first one in the packet; So maybe you can upgrade your RB450Gx4 to latest beta and see if things got any better? did that too on 74beta5. issue still persists.support has been given supout.rif even on latest beta (beta5)
by teleport
Tue Jun 28, 2022 4:02 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

From Support: "We have managed to reproduce the issue locally in our labs and look forward to fixing it on upcoming Router OS versions, unfortunately, I cannot provide an ETA now." if anyone wants this issue to be prioritized so that they can use container feature or anything else new in 7...
by teleport
Mon Jun 27, 2022 2:50 am
Forum: General
Topic: Having trouble setting up WireGuard
Replies: 25
Views: 4038

Re: Having trouble setting up WireGuard

can someone condense the thread to best practice(and working setup) needed to setup wireguard client on Mikrotik to connect to protonVPN.thanks
by teleport
Sun Jun 26, 2022 1:43 am
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

downgrade to 7.2.3 fixed the issue. seems to be regression crept into newer releases. can someone bring this to attention of mikrotik developers. thanks Nice catch. There are already reports about various DHCP clients having issues with DHCP server in 7.3 (and AFAIK 7.4beta). Seems that option orde...
by teleport
Sat Jun 25, 2022 8:40 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

played around with that too..12 hrs was initial.then changed to 8 hours.both cases at end of 15 seconds it asks for lease again in a perpetual loop..changed power supply from PoE to dedicated power..same issue..introduced third party switch in between. still same behavior. Here is latest findings: ...
by teleport
Sat Jun 25, 2022 8:22 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

Port flapping (intermittent connection losses) should be shown in logs even with default logging settings. And those would explain frequent DHCP lease renewals. What about lease time setting on your DHCP server? It seems that too short setting (e.h. shorter than a few tens of minutes) can upset som...
by teleport
Sat Jun 25, 2022 7:19 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

Port flapping (intermittent connection losses) should be shown in logs even with default logging settings. And those would explain frequent DHCP lease renewals. What about lease time setting on your DHCP server? It seems that too short setting (e.h. shorter than a few tens of minutes) can upset som...
by teleport
Fri Jun 24, 2022 8:41 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

And nothing else about that device or ethernet port through which it connects?

Did you try to reboot RB260GS?
Reboot did not help. Any specific logging levels on rb450gx4? Just had dhcp logging level on apart from standard log levels .
by teleport
Fri Jun 24, 2022 6:24 pm
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

Re: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

attached is the debug log from the upstream dhcp server.(rb450gx4)..notice every 15 seconds..there is activity..
by teleport
Fri Jun 24, 2022 2:42 am
Forum: RouterBOARD hardware
Topic: RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]
Replies: 19
Views: 4435

RB260GS issue(DHCP keeps renewing every 15 seconds) and devices connected are not stable [SOLVED]

have an Rb260GS switch which had been working great for about 1.5 years. recently the computers connected to the switch were finding it difficult to get DHCP IP address. the switch is in turn connected to an RB450GX4 up stream router(also DHCP server). to isolate the issue to the switch, replaced th...
by teleport
Fri Feb 25, 2022 8:16 pm
Forum: General
Topic: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]
Replies: 10
Views: 5343

Re: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]

issue was related to zerotier interface not getting zerotier address.this was working before. now, you need to set 'allow managed' flag in zerotier interface configuration screens in winbox. after setting it the interface gets ip address and things work Zerotier : a) without VLans my zerotier setup ...
by teleport
Fri Feb 25, 2022 7:54 pm
Forum: RouterOS beta
Topic: 7.1.3 Zerotier issue [SOLVED]
Replies: 4
Views: 3146

Re: 7.1.3 Zerotier issue [SOLVED]

thanks.works now. just wish this was documented well in the help/wiki section for zerotier.
in the past this was working without explicitly assigning this flag when things had to be done via commandline.
Try enabling this:
Screenshot 2022-02-25 115545.png
by teleport
Fri Feb 25, 2022 7:59 am
Forum: RouterOS beta
Topic: 7.1.3 Zerotier issue [SOLVED]
Replies: 4
Views: 3146

7.1.3 Zerotier issue [SOLVED]

after successful setup of zerotier
the command /zerotier/interface/print shows correct output and connection is fine.
ip/address/print where interface~"zero"
returns nothing. the interface has no zerotier address

Device:RB450GX4
by teleport
Thu Feb 24, 2022 7:25 am
Forum: General
Topic: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]
Replies: 10
Views: 5343

Re: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]

Zerotier : a) without VLans my zerotier setup was working great. i was able to hit webfig UI from another computer in internet running zerotier(part of same zerotier network) with above VLAN setup zerotier access stopped working: Question: a) should the WAN port be defined in specific way in switch ...
by teleport
Sat Feb 12, 2022 8:12 am
Forum: General
Topic: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]
Replies: 10
Views: 5343

Re: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]

Hi All: i was able to make it work. here are my switch related settings on my RouterBoard. to test: had one guest vlan id 10 and another management vlan 20. since mine had atheros 8327, when you turn on vlan-mode secure..it does all the magic of tagging/untagging(using setting of default-vlan-id) wi...
by teleport
Fri Feb 11, 2022 5:21 pm
Forum: General
Topic: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]
Replies: 10
Views: 5343

Re: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]

Thanks to both of you for replies(it was a great primer to read) . Anav: for Routerborad RBG450GX4 i gather from documentation that /interface ethernet switch vlan {} and /interface ethernet switch port {including switch port} are the way to set it up. how would the management LAN setup look like wi...
by teleport
Thu Feb 10, 2022 10:30 pm
Forum: General
Topic: VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]
Replies: 10
Views: 5343

VLAN Configuration: Unifi AP(3 ssids on 3 VLans) +Mikrotik Router(RBG450GX4) [SOLVED]

AP Device: U6LR (3 ssids: Vlan 20,30 and third under default 'LAN'{MGMT Vlan} ). Mikrotik: RBG450GX4 (eth1 -connected to internet, eth2 -connected to AP, eth3 connected to downstream switch that has Unifi controller connected,eth4,5 other devices ) would like: Vlan20 clients to have only internet ac...
by teleport
Mon Sep 27, 2021 1:11 am
Forum: RouterOS beta
Topic: v7.1rc4 [development] is released!
Replies: 276
Views: 87380

Re: v7.1rc4 [development] is released!

in 7.1rc4 on rb450gx4, i see these sporadic errors: "DoH server connection error: Idle timeout - waiting data"
its configured for cloudflare DNS.
by teleport
Sun Sep 05, 2021 9:24 pm
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 319627

Re: ZeroTier added to RouterOS v7.1rc2

Like this feature a lot! I have the RB4011 non wireless on version v6.48.4. Apart from backing up the current config, is there anything else I need to do before going to 7.1rc2? i did it on routerboard rb450gx4 and all i had to do was drop the rc2 into 'files' and reboot twice. also take the zeroti...
by teleport
Sat Sep 04, 2021 11:21 pm
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 319627

Re: ZeroTier added to RouterOS v7.1rc2

Teleport, start with Zerotier tutorial on their webpage. Did you get a connection to their network, and then went and approved this Windows PC in the zerotier portal? You have to approve every device there. thanks for response. those were all setup correctly. i have the setup working now after the ...
by teleport
Fri Sep 03, 2021 8:21 am
Forum: RouterOS beta
Topic: ZeroTier added to RouterOS v7.1rc2
Replies: 335
Views: 319627

Re: ZeroTier added to RouterOS v7rc2

Why not, you can install iPhone Zerotier client and then join your home LAN with this. Home network with Mikrotik ethernet router rb450gx4: tried to access the webfig URL using the zerotier IP from a windows box(zerotier enabled/connected) with not much success.(zerotier is running and connected to...
by teleport
Tue Sep 08, 2020 12:01 am
Forum: RouterOS beta
Topic: v7.1beta2 [development] is released!
Replies: 385
Views: 160746

Re: v7.1beta2 [development] is released!

have RBG450GX4 with latest stable version. am trying to apply 7.1 beta 2. no matter what approach i take(use webfig/winbox->quickset/winbox->system->packages for upgrade,dropping npk file), i get the 'not enough space for upgrade' in the log after reboot. here is log line 1 and 2 after reboot: syste...