Community discussions

MikroTik App

Search found 48 matches

by lahoras
Tue Dec 18, 2018 5:06 am
Forum: Announcements
Topic: v6.43.7 [stable] is released!
Replies: 53
Views: 15345

Re: v6.43.7 [stable] is released!

My experience is bad, nat 1:1 do not work, clients conections are very slow.
by lahoras
Sun Jan 01, 2017 12:38 am
Forum: Wireless Networking
Topic: Problem with cannel wide mANTBox 15s
Replies: 1
Views: 593

Re: Problem with cannel wide mANTBox 15s

Hello, is not a problem on my mANTBox 12s is native chip limitation¿?

thank again.
ARIEL
by lahoras
Fri Dec 16, 2016 6:08 am
Forum: Wireless Networking
Topic: Problem with cannel wide mANTBox 15s
Replies: 1
Views: 593

Problem with cannel wide mANTBox 15s

Hello thanks for red this post: I'm using a mANTBox 15s, and when I try setup of 5 mhz or 10 mhz wide channel on interface list, and in bottom of tab wirelless show this erros: no supported channel scan list does not support channel empty scan list This fail is when I seting on Frecuency Mode, regul...
by lahoras
Tue Feb 10, 2015 4:40 am
Forum: Wireless Networking
Topic: PTMP overall speed problem
Replies: 13
Views: 2313

Re: PTMP overall speed problem

Hello, increment on AP tdma-period-size=6

regards

ARIEL HORAS
by lahoras
Fri Oct 10, 2014 10:02 pm
Forum: General
Topic: Router OS 6.20 - system disk problem
Replies: 2
Views: 1169

Re: Router OS 6.20 - system disk problem

seems like bug, can any Mikrotik staff confirm this?.

regards

ARIEL HORAS
Systemas MicroInformaticos
by lahoras
Sun Oct 05, 2014 5:32 am
Forum: General
Topic: Router OS 6.20 - system disk problem
Replies: 2
Views: 1169

Router OS 6.20 - system disk problem

I have a problem with the new command / disk on Ros 6.20, I am using a RB450G and I find microsd installed, which may be the problem?, anybody can help me?

Ariel Horas
Systemas MicroInformaticos
by lahoras
Wed Aug 06, 2014 7:33 am
Forum: Forwarding Protocols
Topic: Multihoming bgp for load balancing
Replies: 6
Views: 4959

Re: Multihoming bgp for load balancing

IPANetEngineer; IPANetEngineer; Sorry for reopen an old post, but I need your help, I begining with bgp multihoming configuration, I have two peers and I want use all my block /22 only, no as last example that where route an /24 block for every peer, is possible this?, can you let me an example here...
by lahoras
Thu Jun 06, 2013 7:13 am
Forum: Wireless Networking
Topic: R5SHPn
Replies: 6
Views: 2606

Re: R5SHPn

I think R5HSPN is a very good choice, in my case, I had pannel with vertical polarization only, then I just repace old r52 and imediaty my wireless network was converted to MINO one chain, the only problems was that in rb433 does not possible install 3 units, to install two units due invest heatsink...
by lahoras
Tue May 28, 2013 9:38 pm
Forum: Beginner Basics
Topic: how i can store log and graphics on microSD on RB433AH
Replies: 1
Views: 722

how i can store log and graphics on microSD on RB433AH

Hello, i need save log data and graphics on microsd, becouse When power is down is lost this data, can enybiody help me whit this or is not possible?.

thanks in advance,

ARIEL HORAS
Systemas MicroInformaticos
Tunuyan-Mendoza-ARGENTINA
by lahoras
Sun Apr 29, 2012 8:33 am
Forum: General
Topic: v5.15 released!
Replies: 150
Views: 30616

Re: v5.15 released!

I'm using RB411, 411AH, 433, 433AH, RB600, RB600A, RB435G, in all board PMT system are not works, specially were I have to many direfrents CPE's brand, on some only there are UBNT CPE, but before 3 o 4 hours, customers links down, I have back to 5.14, really I had a black monday when I was upgraded ...
by lahoras
Mon Apr 23, 2012 6:16 am
Forum: RouterBOARD hardware
Topic: RB1100AHx2 slowed down to 533MHz?
Replies: 6
Views: 2348

Re: RB1100AHx2 slowed down to 533MHz?

Did you read my post?, I know that give this error, but if you try using winbox is possible change frecuency processor, You dont need use serial console, try on winbox system routerboard and changue processor frecuency, is possible until 1333 mhz. It's clear that you're not test my solution, then re...
by lahoras
Sun Apr 08, 2012 12:05 pm
Forum: Wireless Networking
Topic: Which Chain is Best in 2.4ghz
Replies: 6
Views: 1225

Re: Which Chain is Best in 2.4ghz

Thanks, for explanation, but I'm using only chain 1 and chain 0 is deactivated on HT options, I decide use chain 1, because when scan signals are much beeter than using chain 0, minipci board is a Mikrotik R2N, and this is possible set up with compex MIMO models too.

ARIEL
by lahoras
Sat Apr 07, 2012 10:14 am
Forum: General
Topic: Can bridge be used as firewall, and if so, how?
Replies: 7
Views: 14050

Re: Can bridge be used as firewall, and if so, how?

eugenevdm,i'm trying use firewall on bridge to block passthrough between wlans of my RB433, my case is similar because I want that windows customers can not access to other users that by default accidentaly have same group name and have any resource shared. It was imposible for me makes that works, ...
by lahoras
Sat Mar 24, 2012 3:04 am
Forum: RouterBOARD hardware
Topic: RB1100AHx2 slowed down to 533MHz?
Replies: 6
Views: 2348

Re: RB1100AHx2 slowed down to 533MHz?

You dont need use serial console, try on winbox system routerboard and changue processor frecuency, is possible until 1333 mhz.

ARIEL
by lahoras
Sat Mar 24, 2012 3:01 am
Forum: Wireless Networking
Topic: Which Chain is Best in 2.4ghz
Replies: 6
Views: 1225

Re: Which Chain is Best in 2.4ghz

I m actually using only 1 antenna but on chain 1 have best perfomance, that using chain 0, can you help me explaning reason you have to recommend chain 0.

best regards.

ARIEL
by lahoras
Wed Mar 14, 2012 7:05 am
Forum: Virtualization
Topic: xen+x86 when?
Replies: 16
Views: 6331

Re: xen+x86 when?

Then the problem dosen't memory storage?, how many metarouters can run simultaneously on rb1100AH?, can you help me with this?, I have purchased a RB1100AHx2 and is not support metarouter, is incredible perfomance with respect RB1100.

regards

ARIEL
by lahoras
Sat Mar 10, 2012 7:20 am
Forum: Virtualization
Topic: xen+x86 when?
Replies: 16
Views: 6331

Re: xen+x86 when?

Is very inportant this question, becouse at the moment, as metarouter only run on rb1000 or rb1100 and this are discuontinued, in new line rb1100ah and rb1100ahx2 dosen't run, only is possible use on rb450g and is not very realiable, too many users can confusind and try virtualization on KVM, belivi...
by lahoras
Tue Mar 06, 2012 2:50 pm
Forum: General
Topic: RB1100AH 41MB HDD Storage (Instead of 512mb)
Replies: 19
Views: 5857

Re: RB1100AH 41MB HDD Storage (Instead of 512mb)

Normis, all your answers are clear, it is true, you have edited all the datasheets, none now says which is the size of the NAND, anyway, you should definitely relive special subject have degraded the product, I always had full confidence in the Mikrotik company and this action is disappointing.

ARIEL
by lahoras
Tue Mar 06, 2012 5:49 am
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Memorygate
Replies: 30
Views: 8675

Re: RB1100AHx2 Memorygate

Mikrotik has made ​​a mistake, or is it possible that the MANUFACTURER, how annoying this situation is, do not show their faces and recognize the error giving explanations, is easy say 'RB1100AHx2 metarouter does not support', I believe that if they had published it on datasheet, had not sold even a...
by lahoras
Sat Mar 03, 2012 8:16 pm
Forum: Virtualization
Topic: MetaRouter and 1100AH on ROS 5.8 not working?
Replies: 36
Views: 19290

Re: MetaRouter and 1100AH on ROS 5.8 not working?

Normis: Industrial tractors do different things that street cars as you say, in this case RB1100, RB1000AH & RB1000AHx2 are routers, and theoretically a router with a processor that can run more fast, is the evolution of the initial product, but with minus memory resource?, that not permit do same w...
by lahoras
Fri Mar 02, 2012 6:41 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Memorygate
Replies: 30
Views: 8675

Re: RB1100AHx2 Memorygate

AHx2 is multicore, but Metarouter does not work on multicore systems.
Ok, if is not work why error reported when I try add metarouter is "not enough resources (6)", this only makes confusions and waste time, this is not clear explanation.

ARIEL
by lahoras
Fri Mar 02, 2012 3:58 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Memorygate
Replies: 30
Views: 8675

Re: RB1100AHx2 Memorygate

Normis, sorry, when I wrote the post I made the mistake of referring to as RAM, when realy is NAND, on RB1100 is 520,1 MB and in RB1100AHx2 is only 41,7 MB (is almost 10% from RB1100 and RB1100AHx2), I Would like if you can, read all post and tell me finaly why is not support metarouter RB1100AHx2, ...
by lahoras
Fri Mar 02, 2012 6:17 am
Forum: Virtualization
Topic: MetaRouter and 1100AH on ROS 5.8 not working?
Replies: 36
Views: 19290

Re: MetaRouter and 1100AH on ROS 5.8 not working?

update to newest version possible, downgrade to previous version and upgrade back to newest one. in this case 5.14 then downgrade to 5.13 or 5.12 where problem is resolved and then back to 5.14 Unfortunately in older versions this board could load smp kernel in some rare cases and stick with it. ne...
by lahoras
Thu Mar 01, 2012 10:58 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Memorygate
Replies: 30
Views: 8675

Re: RB1100AHx2 Memorygate

RB1100 works fine but is discontinued, virtualization is the future, in my old system I had 3 rb450 2 rb450G, 1 rb750G and 1 PC. thanks to rb1100 and metarouter could reduce number of equipment and have fewer points of failure, and improve the quality and availability of my service. I don't understa...
by lahoras
Thu Mar 01, 2012 6:42 pm
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Memorygate
Replies: 30
Views: 8675

Re: RB1100AHx2 Memorygate

Normis, sorry I can understand how I can use MicroSD to another router, I have running virtual router running on doing load balance on RB1100, this is not possible on my new RB1100AHx2, can you help me to implement it, the problem is ram.

thanks

ARIEL
by lahoras
Thu Mar 01, 2012 7:42 am
Forum: RouterBOARD hardware
Topic: RB1100AHx2 Memorygate
Replies: 30
Views: 8675

Re: RB1100AHx2 Memorygate

AND I have other question, on first RB1100 have 512 mb ram too, this is very important, I can understand how is possible reduce memory on this great router, is realy crazy, I can run metarouter..........realy apologize.

ARIEL
by lahoras
Mon Aug 01, 2011 8:02 am
Forum: Wireless Networking
Topic: FRECUENCY RANGE R2N & R52hN on 2,4 ghz
Replies: 3
Views: 1011

Re: FRECUENCY RANGE R2N & R52hN on 2,4 ghz

Normis...your answer is correct, if routerboar shows all frecuencies mini-pci works on them?, becose I test to many boards that list ferecuency but only works fin on 2,4 ghz range, for this is my post, can you help me or tell me where is spec of r52HN?.

thanks in advance.

ARIEL
by lahoras
Wed Jul 13, 2011 5:24 am
Forum: Wireless Networking
Topic: FRECUENCY RANGE R2N & R52hN on 2,4 ghz
Replies: 3
Views: 1011

Re: FRECUENCY RANGE R2N & R52hN on 2,4 ghz

I haven´t installed yet R52nH on routerboard, my question is becouse only I have R2N, but this was discontinued and I need have a replace if R2N dosen't work more, whith the same features. There are to many branch radios that in theory suports this frecuency range but they aren't has good perfomance...
by lahoras
Mon Jul 11, 2011 8:39 pm
Forum: Wireless Networking
Topic: FRECUENCY RANGE R2N & R52hN on 2,4 ghz
Replies: 3
Views: 1011

FRECUENCY RANGE R2N & R52hN on 2,4 ghz

Actually I have varios R2N mini pci radios on production, but they are discontinued, this wokrs fine, really, frecuency range's R2N is 2.192 - 2.539GHz (5 MHz step) on 2,4 ghz, my question is, R52hN support the same range's frecuency on 24, ghz?, and which is on 5 ghz?, I can found this information ...
by lahoras
Sat Dec 11, 2010 1:51 am
Forum: General
Topic: Multiple simultaneous pppoe login through one CPE
Replies: 7
Views: 1544

Re: Multiple simultaneous pppoe login through one CPE

The problem is becouse is not posible, your CPE me be transparent only one mac, or pppoe server seems cpe mac address, only will be possible if you can implement wds on CPE and obviously AP system, whit this you can conect multiple customers over ethernet cable pluged on same CPE.

ARIEL
by lahoras
Sat Dec 11, 2010 1:35 am
Forum: SwOS
Topic: SwOS version 1.3 released!
Replies: 16
Views: 5110

Re: SwOS version 1.3 released!

On changelog says,

*) fixed problem - remote web interface didn't work well over VLANs;

But if I want conect to web interface from trunk port isn't posible, is this a bug? or simply sw205G do not do this.

thanks in advance

ARIEL
by lahoras
Mon Apr 26, 2010 2:27 am
Forum: Wireless Networking
Topic: ROS V4.7 disapears
Replies: 5
Views: 1087

Re: ROS V4.7 disapears

Note! The recently released RouterOS v4.7 contained an uncommon DHCP server problem in some non standard installations, until a fix can be provided, you can use RouterOS v4. Can tell me wich is UNCOMON DHCP SERVER I m using dhcp over x86 and have not any problem, is posible to know more clear the pr...
by lahoras
Sun Apr 25, 2010 8:54 pm
Forum: Wireless Networking
Topic: ROS V4.7 disapears
Replies: 5
Views: 1087

ROS V4.7 disapears

Hello, recent was in mikrotik web site a new v4.7, and now is not present, have any bug?, I'm runing it on rb433 and x86 and does not have any problem, can you explain me if there are some problem with v 4,7 must I dowmgrade?


ARIEL
by lahoras
Sun Apr 25, 2010 8:50 pm
Forum: Wireless Networking
Topic: ROS4.6 winbox closing with Virtual AP
Replies: 3
Views: 979

Re: ROS4.6 winbox closing with Virtual AP

On recent rosV4.7 version the problem is the same.

ARIEL
by lahoras
Mon Aug 10, 2009 9:43 am
Forum: Wireless Networking
Topic: Low signal problem RB433 + Compex WLM54G23
Replies: 6
Views: 1628

Re: Low signal problem RB433 + Compex WLM54G23

This is better joke that I have suffered, but works well, :lol: , don't try logic, main is not A antenna!!!!, main may be B or AUX.

thanks Jsuter, you avoided me the madness!

ARIEL
by lahoras
Tue Apr 22, 2008 7:17 am
Forum: Beginner Basics
Topic: VoIP Queue / Prioritization Question
Replies: 10
Views: 17471

Re: VoIP Queue / Prioritization Question

Nobody can tell me anything about this?, can you help me.

greeting
ARIEL
by lahoras
Mon Apr 07, 2008 12:11 am
Forum: Beginner Basics
Topic: VoIP Queue / Prioritization Question
Replies: 10
Views: 17471

Re: VoIP Queue / Prioritization Question

Hello, I'm trying use wiki's example, /ip firewall mangle add chain=forward tos=xxx action=mark-packet new-packet-mark=VOIP passthrough=no \ comment="voip tos xxx" disabled=no Where in my case TOS is 184 (mark of linksys voip adapter sp2102), then add queue tree / queue tree add name="ether1_voip" p...
by lahoras
Mon Feb 04, 2008 7:07 pm
Forum: Beginner Basics
Topic: [Ask] IP PROXY & WEB-PROXY
Replies: 5
Views: 1725

Re: [Ask] IP PROXY & WEB-PROXY

Normis, I understand your reply, but in web-proxy is possible set up another hard unit and reserve ram memory, this options are not present on ip-proxy, and I can found on manual how to, can you help me?, thanks in advance.

ARIEL
by lahoras
Mon Feb 04, 2008 6:40 pm
Forum: Beginner Basics
Topic: RS232 question
Replies: 9
Views: 3084

Re: RS232 question

This is another compac solution, http://www.tibbo.com/products/, it was help me too much, becouse is a transparent rs-232 over ethernet link, i hope help you....

ARIEL
by lahoras
Thu Dec 27, 2007 4:27 am
Forum: Beginner Basics
Topic: asyc serial port non standart set up on ISA slot
Replies: 1
Views: 927

Re: asyc serial port non standart set up on ISA slot

I'm discovered that is not possible change IRQ on async port.

thanks in advance.

ARIEL
by lahoras
Tue Dec 11, 2007 5:12 am
Forum: Beginner Basics
Topic: asyc serial port non standart set up on ISA slot
Replies: 1
Views: 927

asyc serial port non standart set up on ISA slot

Hi, Mikrotik OS support two serial ports, COM1/3F8 on IRQ4 and COM2/2F8 on IRQ3, I've added an ISA modem jumpered on COM3/3E8 on IRQ5 and is not detected, is a ROS limitation becouse I can fond on manual how I can change or add another serial port.

thanks in advance,

ARIEL
by lahoras
Tue Nov 27, 2007 5:37 am
Forum: Beginner Basics
Topic: How I do to install a second drive for web proxy
Replies: 6
Views: 2895

Re: How I do to install a second drive for web proxy

Yes, TCP/IP never well dead, in a way or of the other, we will continue transmitting packets!!!
I send a mail.

thanks again.
ARIEL
by lahoras
Sat Nov 24, 2007 5:02 am
Forum: Beginner Basics
Topic: How I do to install a second drive for web proxy
Replies: 6
Views: 2895

Re: How I do to install a second drive for web proxy

Maxi, thank you very much, my name is ARIEL, my amateur radio license is LU7MBE, I remember you since packet radio, very cool times!

thanks again

ARIEL
by lahoras
Thu Nov 22, 2007 9:36 pm
Forum: Beginner Basics
Topic: How I do to install a second drive for web proxy
Replies: 6
Views: 2895

How I do to install a second drive for web proxy

Hello, and thanks for help me, I have running mikrotik OS on PC over compact flash and I want install a hard disk drive to be used by web proxy, must I install a drive and reinstall router OS again or simply install hard dirve and start system?.

thanks in advance.

ARIEL
by lahoras
Wed Sep 05, 2007 2:38 am
Forum: General
Topic: port forwarding how to ??
Replies: 16
Views: 3257

Re: port forwarding how to ??

sergejs, thank you for feedback, the problem is only if I implement pppOe client, but only with echolink aplication, with emule for example that requier one tcp an udp port wroks fine. Actualy I have a ADSL line from my ISP, and they give a modem/router zyzel that can operate on bridge mode or routi...
by lahoras
Tue Sep 04, 2007 12:27 pm
Forum: General
Topic: port forwarding how to ??
Replies: 16
Views: 3257

Re: port forwarding how to ??

sergejs, I can't specify address on public interface becouse is a dynamic, however I test it but dosen't work, I can understand why not run ok. can you check if your suggest rules may be this?. 5 chain=dstnat in-interface=ether2 protocol=tcp dst-port=5200 action=dst-nat to-addresses=192.168.0.2 to-p...
by lahoras
Tue Sep 04, 2007 12:35 am
Forum: General
Topic: port forwarding how to ??
Replies: 16
Views: 3257

Re: port forwarding how to ??

Well, you may use specific port application that is destined to public (PPPoE client) interface. Hello, thanks for feedback, this are my nat rules 3 chain=dstnat dst-address=172.18.1.2 protocol=tcp dst-port=5200 action=dst-nat to-addresses=192.168.0.2 to-ports=5200 4 chain=dstnat dst-address=172.18...
by lahoras
Sun Sep 02, 2007 8:49 pm
Forum: General
Topic: port forwarding how to ??
Replies: 16
Views: 3257

Re: port forwarding how to ??

Documentation describes it, it is not very hard option, 'ip firewall nat add action=dstnat chain=dst-nat dst-address=public_address_of_the_router dst-port=5060 protocol=tcp to-addresses=10.0.0.50', the same rule for UDP. Hello, I'm trying do this to works with echolink software, but dosen't work, I...