Anyone with experience with these versions on the CCR1009 or other CCR10xx devices?

I've been keeping at least 1 CCR1009v1 up to date with the testing/dev releases (now 7.10rc4). Although I don't do ipsec or advanced routing, everything else seems to be on par with the other architectures.

I think I can add more info on the DNS... 1. I've had issues streaming content with Amazon FireTV and GoogleTV when they have IPv6 address for some time. Since 6.48 at least. 2. The issue is present on 6.48.1 (just tested today) and 7.7beta6. 3. I have 8.8.8.8 and 2001:4860:4860::8888 as my upstream...

Thanks dtaht!
I wish we could upvote posts and threads. I'd do both.

+1
I've been holding off on setting this up on my 317 because of this issue.

Attempted an upgrade from 7.1beta6 ro 7.1rc1 on a CCR-1009. On reboot, I got "std failure timeout (13)", all CLI commands hanging, script timeout errors. Couldn't even create a supout. I had to reformat the nand and reinstall via netinstall.

+1!

The changes (in the form of features and fixes) introduced with 6.49beta46, are included in 7.1beta6. That said, there are features of RouterOS v6, which RouterOS v7 does not support (e.g. MetaRouter), so it would not be accurate to say that 7.1beta6 includes all features of 6.49beta46. There are a...

Am I the only one with broken WebFig?

Maybe... Webfig works fine here.

Which platform?

RB750Gr2: Install from Webfig hangs at "calculating download size". Upload via Files resulted in boot loop. Reinstall 7.1beta5 via netinstall works but WebFig is completely broken. It returns a single response when accessed for teh first time after a reboot, then returns no responses to a...

RB750Gr2: Install from Webfig hangs at "calculating download size". Upload via Files resulted in boot loop. Reinstall 7.1beta5 via netinstall works but WebFig is completely broken. It returns a single response when accessed for teh first time after a reboot, then returns no responses to an...

NetMetal 5 922UAGS-5HPacT with an add-on R11e-2Hnd .. The 2.4 GHz radio isn't detected at all in 6.49beta11. Working fine in 6.48.1
Supout sent: SUP-43760

I'm going to wait for RouterOS 7.8675309Beta42 before trying another one. Maybe it'll be out before the universe collapses but I'm not holding out hope.

Chateau LTE12, /export works just fine. Please report to support everyone who has issues, that means the bug depends on your specific configuration, so Mikrotik should detect which config lines/firmware problems causes export failing. Chateau LTE12 : I had to do netinstall. Then again a rests to de...

NetMetal 5 922UAGS-5HPacT with an add-on R11e-2Hnd .. The 2.4 GHz radio isn't detected at all. This was an earlier issue that was fixed in Beta3 but now seems to be broken again. Supout sent.

Got a response from support... IGMP snooping seems to be the culprit.

If you've got a device in a boot loop, disconnect everything except a management machine (or use the serial console) and turn IGMP snooping off on your bridges and see if that helps.

try disabling simple queues

I finally managed to get the device partitioned and get 6.48beta58 running partition 0 and 7.1beta3 installed on partition 1. With the exact same config, 7.1beta3 reboots as soon as traffic starts passing through. No simple queues enabled.

You should have partitioned the router (2 partitions) before diving into beta version installation. Then you can always go back to the working partition, or the router will even do that by itself when the newly updated partition fails to boot. Yeah probably should have but all of the other devices ...

CCR-1009 (tile) went into boot loop after upgrade from 3.48beta58 to 7.1beta3. I'm not exactly sure what triggers the reset but I was just barely able to get a supout which is on its way to MT support. Unfortunately, I couldn't get it to stay up long enough to downgrade but also unfortunately, netin...