You are right. I should have edited my post. The link I gave is from Mikrotik's supported hardware. I have 2 RB133 boards I have 6 Gigabyte GN-WI01GS mPCI cards new I want to use in the RB133 boards I saw in the supported hardware the Gigabyte GN-WI01GT mPCI card is supported on routerboards an x86 ...

Here is where I see compatibility with routerboards.
http://wiki.mikrotik.com/wiki/Supported_Hardware
But what is mPCI-e slots on a routerboard ? I have 2 RB133 boards. Are they compatible ?
Earl

I did see in tested equipment the Gigabyte mPCI GN-WI01GT board is supported. The GT model and the GS model have different chipsets ?
Earl

Ooops. I meant RB133
Earl

Will RT2561ST A/B/G chipset mPCI cards work in a Routerboard 311 ?
Is Mikrotik OS ONLY for Atheros chipset based radios ?
Earl

Ooops. I meant RB133
Earl

The GN-WI01GS is an A/B/G 54 meg card
in supported hardware it says a GN-WI01GT is supported. Thats an B/G card
I wonder if thats the problem ?
It not an Althros chip. It is an RT2561ST
Earl

InoX
Did you use any special driver to get this radio to work ?
Earl

Is there a different wireless.npk I can run to see this card ?
Earl

Mmmm... I have 6 brand new ones and none will show up under interfaces in winbox. I have tried them in 2 different RB133 boards.
I must have got a bad batch. Strange.
Earl

What ? This card will or won't work on a routerboard 133 ? I own the network.
Routerboard does not see the GN-WI01GS card.
Any ideas ?
Earl

Anyone successfully got a gigabyte card to work in a routerboard 133 ?
the number on the card is GN-WI01GS
Thanks
Earl

mmcx NO switch !
I have replaced tooo many ufl pigtails !
More room for 3 mpci card RB !

Take back the 12 R52 boards that are bad that I have or replace with something good !
Earl
uphi.net

Is there any way to get 1 min (or less) average in graphing instead of/or in addition to the 5 min graphs ?

Congratulations on this great job ! As a ham radio operator, and builder of ATV repeaters, I know how hard it is on those frequences ! Very impressive ! Keep us updated on progress and please publish specs on antenna dish.
Thanks,
Earl
N8TV

I hope someone answers this also....same problem here....

I have a MT 2.8.27 router upgradable till April of 2006. I want to upgrade to 2.9.11. When I do this my firewall rules dont work. How do I migrate from 2.8.27 to 2.9.11 ?

I cant seem to get the 2.9beta19 from usa or lat.
Anyone else having this problem ?

I watch RSSI with PRTG like this : http://12.10.166.70 look at Moriarty RSSI.
Earl - UpHi.net

Well I can write cfg scripts for mrtg, I can find my way around winbox and the command line for MT OS, but scripts I haven't done yet. I need to study more and at my age (60) it is sometimes hard to grasp a new idea. BTW I am the author for the .pl and cfg scripts that are on Smartbridges site. I ha...

the oid reports the mac address and the number into the table example: .1.3.6.1.4.1.14988.1.1.1.2.1.3.0.13.136.147.64.224.4 the .0.13.136.147.64.224 of the oid is the mac address in desimal form. just convert to hex. 0=0 13 =D 136=88 147=93 64=40 224=E0 so the mac address is 00:0D:88:93:40:E0 the fi...

Any chance getting the Prism 2 200mw 2.4 Ghz mini pci cards to work in the nstream mode ??
Earl - UpHi.net

Does the Altros chipset 5004 used in CM9 mini-pci for a/b/g work with nstream ? I have heard they will.
Earl - UpHi.net

See my maps and rssi graphs (login to maps w/ guest as user and no password) http://12.10.166.70:82 maps with up/down state http://12.10.166.70 Signal strength graphs I have 4, 6, 18, and 21 mile links using 200 mw 802.11b mini-pci cards. See map for details. BTW I love the fact that MT put the RSSI...

How about USB support for GPS ?
Earl

why are my posts being removed ?
Earl

Where can I download the MIBs for the MikroTik OS ?
Earl