+1

Add filters in the bridge on the wireless interface add chain=input mac-protocol=ip src-port=67 ip-protocol=udp action=drop comment="Drop DHCP" disabled=no in-interface=wireless add chain=forward mac-protocol=ip src-port=67 ip-protocol=udp action=drop comment="Drop DHCP" disabled...

I think the same thing

check this... http://forum.mikrotik.com/viewtopic.php?f=1&t=17797

I have the same problem as nexus010 with RB333 + ubiquiti XR5 and still waiting for a solution

The problem with using 2 WAN side data lines to do load balancing is that the router will flip back and forth between the 2 WAN's, and the LAN side will report first to one WAN address, then the other. IF you are using SSL, you lose your connection as soon as it flips. There is no good way to get a...

I have the same problem with AP RB333/RB133 + minipci atheros (senao NMP-8602 plus/ubiquiti xr2/compex WLM54AG 6A23) and clients WL-1302 chipset realtek 8181 ( http://www.ccandc.com.tw/product/11b-wl-1302.htm )
I need a solution urgent

The gateways are added dynamically in the routing table when establishing connections PPPOE

Check this post... load balancing with 5 adsl

http://forum.mikrotik.com/viewtopic.php?f=1&t=17797

Here shipping a script simply to balance 5 lines adsl tested RC9. I expect them gray, greetings /interface pppoe-client add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 comment="" \ dial-on-demand=no disabled=no interface=adsl1 max-mru=1480 max-mtu=1480 \ mrru=...

I am trying to do the same thing, but even without positive results
You can publish the configure script?

Greetings.
Gabriel.

I have the same problem with RB333 and RB44G