Community discussions

Search found 165 matches

by enk
Fri May 27, 2011 4:20 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 207722

Re: Feature requests

I mean, either cisco router allows binding services to specific interface/address and is far away, or it doesn't, and it's not logical, not user-friendly and not usable For RoS it is not logical to binding services to specific interface/address (although sometimes it use this method - pppoe server,...
by enk
Fri May 27, 2011 2:00 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 207722

Re: Feature requests

cisco is far far away from MT. It is not good things to compare...
by enk
Fri May 20, 2011 4:45 pm
Forum: General
Topic: GRE is not encrypted using IPSEC
Replies: 4
Views: 2520

Re: GRE is not encrypted using IPSEC

There is really some kind of problem. Session sets up not quickly. Sometimes policy becomes invalid, enable/disable helps.
by enk
Fri May 20, 2011 4:44 pm
Forum: General
Topic: gre over ipsec
Replies: 3
Views: 878

Re: gre over ipsec

There is some kind of problem in RoS I think. But I was able to configure GRE over IPSEC in 5.2
Session sets up not quickly.
by enk
Fri May 13, 2011 3:06 pm
Forum: Forwarding Protocols
Topic: need help with OSPF
Replies: 17
Views: 3240

Re: need help with OSPF

Was it helpful?
by enk
Fri May 13, 2011 3:05 pm
Forum: General
Topic: GRE is not encrypted using IPSEC
Replies: 4
Views: 2520

Re: GRE is not encrypted using IPSEC

Tunnel mode is set at the request of a network engineer. I tried to use the transport mode.

Thanks, I did not know that the release 5.2 is now available.
I'll try to update.
But I still recommend you change your mode to transport.
by enk
Fri May 13, 2011 9:24 am
Forum: General
Topic: Feature requests
Replies: 1160
Views: 207722

Re: Feature requests

Provide Bug tracking system. Provide complete release notes with detailed information about linux kernels used and packages. Provide complete information about security vulns in RoS. Provide bug description for each confirmed bug (versions affected, fixed versions, workarounds) looks like you are n...
by enk
Thu May 12, 2011 11:42 am
Forum: General
Topic: Feature requests
Replies: 1160
Views: 207722

Re: Feature requests

Provide Bug tracking system. Provide complete release notes with detailed information about linux kernels used and packages. Provide complete information about security vulns in RoS. Provide bug description for each confirmed bug (versions affected, fixed versions, workarounds) looks like you are n...
by enk
Wed May 11, 2011 1:02 pm
Forum: Forwarding Protocols
Topic: need help with OSPF
Replies: 17
Views: 3240

Re: need help with OSPF

At first try to change you redistribution configuration on each OSPF router like this: /routing ospf set redistribute-static=as-type-1 Explanation: A type 1 route has a metric that is the sum of the internal OSPF cost and the external redistributed cost. A type 2 route has a metric equal only to the...
by enk
Tue May 10, 2011 1:32 pm
Forum: Forwarding Protocols
Topic: need help with OSPF
Replies: 17
Views: 3240

Re: need help with OSPF

Only from core router, firs and last router.
by enk
Mon May 09, 2011 12:41 pm
Forum: Wireless Networking
Topic: What radios are installed in RB433ah
Replies: 12
Views: 1324

Re: What radios are installed in RB433ah


the driver is the same for all those chipsets, this line only shows the driver used.
So there is no possibility to determine chip exactly?
by enk
Sun May 08, 2011 11:23 am
Forum: Wireless Networking
Topic: BIG BUG- Unicast key exchange timeout
Replies: 120
Views: 93080

Re: BIG BUG- Unicast key exchange timeout

Sometimes "unicast key exchange timeout" happens when time is not synchronized between APs. Use NTP for this purpose.
by enk
Sun May 08, 2011 11:20 am
Forum: Wireless Networking
Topic: not polled for too long
Replies: 3
Views: 1458

Re: not polled for too long

check you RoS versions on both device and wireless settings.
It will be helphful to provide
/int wireless export
by enk
Sun May 08, 2011 11:13 am
Forum: Forwarding Protocols
Topic: need help with OSPF
Replies: 17
Views: 3240

Re: need help with OSPF

I think it would be helpful also to provide /routing ospf neighbor print /routing ospf interface print /ip route print where static Also show us this and above output from the tower 6 (last router in loop). Also please show me output from the core router: /ip route print where static /ip addresses p...
by enk
Sun May 08, 2011 9:21 am
Forum: Forwarding Protocols
Topic: need help with OSPF
Replies: 17
Views: 3240

Re: need help with OSPF

Please priovide us with output of the following commands from console (ssh, new terminal, etc.): /routing ospf export /ip address print It would be really helpful. Please confirm that you would like to use only one shortest path from each router to the modems as the default route and alternative par...
by enk
Sun May 08, 2011 8:50 am
Forum: General
Topic: Question for certified consultants
Replies: 4
Views: 743

Re: Question for certified consultants

Paraphrasing. demanded a status of certified consultant?
by enk
Sat May 07, 2011 8:07 pm
Forum: General
Topic: Newbie question...2 radios defaulting back 2 two seperate GW
Replies: 1
Views: 377

Re: Newbie question...2 radios defaulting back 2 two seperat

Please draw a basic diagram and post it here. It is hard to understand your topology and requirements without such drawing.
by enk
Sat May 07, 2011 8:06 pm
Forum: Forwarding Protocols
Topic: need help with OSPF
Replies: 17
Views: 3240

Re: need help with OSPF

Please draw a basic diagram and post it here. It is hard to understand your topology and requirements without such drawing.
by enk
Sat May 07, 2011 8:03 pm
Forum: General
Topic: Question for certified consultants
Replies: 4
Views: 743

Re: Question for certified consultants

Is there no certified consultants? I'm disappointed. According to http://www.mikrotik.com/consultants.html there is 12 consultants. Please someone reply!
by enk
Sat May 07, 2011 8:01 pm
Forum: General
Topic: [BUG] Memory leak with EoIP tunnels on RB750
Replies: 5
Views: 888

Re: [BUG] Memory leak with EoIP tunnels on RB750

Well, I'm trying with different RouterOS versions to find a 4.xx stable one without this bug, and I'll post the results of my search. BY the way, so far no replies from Mikrotik support but I hope someone is taking care of this issue! 4.xx is based on same kernel and maybe on same daemons. I think ...
by enk
Sat May 07, 2011 7:58 pm
Forum: Wireless Networking
Topic: What radios are installed in RB433ah
Replies: 12
Views: 1324

Re: What radios are installed in RB433ah

wrong R52=AR5414 Check vendor by mac address
wrong? Maybe you have no real experience with routerboard? Please, purchase one with R52 to check it again and than post again ))))
by enk
Fri May 06, 2011 10:12 pm
Forum: General
Topic: Multiple Spanning Tree - Provider Backbone Bridge Support.
Replies: 6
Views: 5480

Re: Multiple Spanning Tree - Provider Backbone Bridge Suppor

Did you know what RoS is ROUTER OS? For example Cisco ISR's G1 and older (not newer ISR G2, they have more advanced switch modules) with etherswitch module support only crappy old per-vlan STP! I do not think that is is enough, but MSTP is backward compatible with RSTP and STP. So in this case MT Ro...
by enk
Fri May 06, 2011 10:07 pm
Forum: General
Topic: [BUG] Memory leak with EoIP tunnels on RB750
Replies: 5
Views: 888

Re: [BUG] Memory leak with EoIP tunnels on RB750

The next advice will be made by mikrotik team is to upgrade to latest stable version 5.2. Try this.
by enk
Fri May 06, 2011 10:03 pm
Forum: General
Topic: Run PHP
Replies: 12
Views: 5880

Re: Run PHP

What do you mean? MPLS penultimate hop popping? As I remember the answer is yes =)
by enk
Fri May 06, 2011 10:01 pm
Forum: Wireless Networking
Topic: What radios are installed in RB433ah
Replies: 12
Views: 1324

Re: What radios are installed in RB433ah

/interface wireless print detail
Here you can see chip like "interface-type=Atheros AR5413" on which card is made. Based on it you can make an assumption what is the radio card. In this case it is R52.
by enk
Fri May 06, 2011 9:51 pm
Forum: General
Topic: Question for certified consultants
Replies: 4
Views: 743

Question for certified consultants

Hi, all, especially MCTs.
Guys, please share your experiences and answer to the quesion. How often do you apply for paid help? How often do you provide consulting services related to Mikrotik?
Thank you in advance.
by enk
Fri May 06, 2011 9:45 pm
Forum: General
Topic: Road Warrior VPN/SSTP with Internet Access
Replies: 1
Views: 784

Re: Road Warrior VPN/SSTP with Internet Access

Post your configs here.
by enk
Fri May 06, 2011 9:35 pm
Forum: Beginner Basics
Topic: Routerboard RB750
Replies: 1
Views: 759

Re: Routerboard RB750

/interface pppoe-client add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 dial-on-demand=no disabled=no interface=\ ether5 max-mru=1480 max-mtu=1480 mrru=disabled name=pppoe-out1 password=test profile=default \ service-name="" use-peer-dns=no user=test /ip address add address=192....
by enk
Fri May 06, 2011 9:32 pm
Forum: General
Topic: How to forward pppoe request to other pppoe server?
Replies: 1
Views: 468

Re: How to forward pppoe request to other pppoe server?

You can apply mac address filters for your pppoe server. In this filter you can define client's addresses for whom allowed to connect (for whom your server allowed to reply with PADO packets).
by enk
Fri May 06, 2011 9:26 pm
Forum: General
Topic: switching to routerboard, mcast problem
Replies: 4
Views: 1131

Re: switching to routerboard, mcast problem

Hmm... I am not very good with MCAST, but you can replace your's MT mac addresses with your crappy router's mac and sniff multicast ip address group for which you are subscribed. With this information you can try to reproduce configuration on MT.
Somebody please correct me if I wrong.
by enk
Fri May 06, 2011 9:19 pm
Forum: General
Topic: Bridging and VLAN isolation problem
Replies: 11
Views: 2056

Re: Bridging and VLAN isolation problem

It is the only way to add ip address to the bridge.
by enk
Fri May 06, 2011 9:09 pm
Forum: General
Topic: Feature requests
Replies: 1160
Views: 207722

Re: Feature requests

Provide Bug tracking system. Provide complete release notes with detailed information about linux kernels used and packages. Provide complete information about security vulns in RoS. Provide bug description for each confirmed bug (versions affected, fixed versions, workarounds)
by enk
Thu May 05, 2011 10:23 pm
Forum: Forwarding Protocols
Topic: Where to go with routed network?
Replies: 7
Views: 1438

Re: Where to go with routed network?

RB1000, not RB100. RB100 is crappy old board. RB1000 tested by us to handle up to 300 users with mppe128 encryption. But I don't know actual limitations. I think it is only CPU and Memory dependent. You can use one vrrp group for active/standby failover or you can DNS names and two vrrp groups for a...
by enk
Thu May 05, 2011 10:15 pm
Forum: General
Topic: Bridging and VLAN isolation problem
Replies: 11
Views: 2056

Re: Bridging and VLAN isolation problem

physical port on RoS it is Cisco's routed port analog. You can use physical interface to operate with native vlan or you can create logical sub-interfaces (interface vlan in Mikrotik).
by enk
Thu May 05, 2011 1:22 pm
Forum: General
Topic: PPTP performance problems with Outlook/Exchange
Replies: 5
Views: 1299

Re: PPTP performance problems with Outlook/Exchange

Personally I think you have an MTU problem. Try to adjust your TCP MSS like this:
/ip firewall mangle
add action=change-mss chain=forward disabled=no new-mss=1420 protocol=tcp \
    tcp-flags=syn
by enk
Thu May 05, 2011 1:15 pm
Forum: General
Topic: switching to routerboard, mcast problem
Replies: 4
Views: 1131

Re: switching to routerboard, mcast problem

You can't add multicast mac-address to interface actually. But you can subscribe to multicast group. As I understand you right, you need to recieve IPTV on your computer. So you need to configure PIM routing on your 750. Look at the example here: http://wiki.mikrotik.com/wiki/Multicast_detailed_exam...
by enk
Thu May 05, 2011 1:10 pm
Forum: General
Topic: Bridging and VLAN isolation problem
Replies: 11
Views: 2056

Re: Bridging and VLAN isolation problem

please provide us with your xonfiguration detail and diagram if it possible.
You can use bridge filter to protect you users on L2.
by enk
Thu May 05, 2011 1:07 pm
Forum: General
Topic: ip unnumbered(vlan-per-user)
Replies: 3
Views: 2123

Re: ip unnumbered(vlan-per-user)

Hello how to implement the scheme vlan-per-user on mikrotik 3.20 with ip unnumbered?. komp ----- cisco2950 trunk ------ ether1 mikrotik ether2 ----- internet in the trunk are vlan11-13 on mikrotik created vlan11-13 at ether1. vlan11-13 added to bridge1. bridge1 address is 10.10.10.2/24, komp addres...
by enk
Thu May 05, 2011 10:27 am
Forum: General
Topic: Memory leak in 4.17
Replies: 9
Views: 1052

Re: Memory leak in 4.17

The issue is not with tring - please notice that when someone has bgp router, this is not a toy to play with, but equipment used to serve services ... I'vd made update to 5.2 - for now, cpu usage is much higher than in 3.30 and 4.17 - with traffic ~20m it has 60%! when on 4.17 it had ~20%. M. You r...
by enk
Wed May 04, 2011 11:06 pm
Forum: General
Topic: Memory leak in 4.17
Replies: 9
Views: 1052

Re: Memory leak in 4.17

Enk, but this is not a solution ... :(
Did you try it? It is fair game. Either you solve the problem or not. Worth a try.
by enk
Wed May 04, 2011 7:22 pm
Forum: Forwarding Protocols
Topic: Network Installation and ip routes
Replies: 1
Views: 735

Re: Network Installation and ip routes

Hi! This is simple task for any network engineer, but I think nobody wants to do your job for you here. If you have problems with implementation, try to hire consultant:
http://www.mikrotik.com/consultants.html
by enk
Wed May 04, 2011 7:18 pm
Forum: Forwarding Protocols
Topic: OSPF redistribution between non-backbone areas
Replies: 2
Views: 1799

Re: OSPF redistribution between non-backbone areas

psm, you can use tunnels to brind nonbackbone areas to area 0.
Another variant is to use virtual-links, but it was broken since 3.30, so currently this is not good solution.
by enk
Wed May 04, 2011 7:16 pm
Forum: Forwarding Protocols
Topic: Where to go with routed network?
Replies: 7
Views: 1438

Re: Where to go with routed network?

We are using central pptp-server on RB1000 and hotspots across the network. Working just fine.
by enk
Wed May 04, 2011 6:28 pm
Forum: General
Topic: how to redirect mail to an internal server?
Replies: 3
Views: 1276

Re: how to redirect mail to an internal server?

...

Also try to redirect the traffic with NAT NetMap SMTP and POP traffic to the IP address of the card's internal network server and neither worked.

Someone would know as I could do this? they would appreciate much
Try to use dst-nat redirect.
by enk
Wed May 04, 2011 9:14 am
Forum: General
Topic: Memory leak in 4.17
Replies: 9
Views: 1052

Re: Memory leak in 4.17

Upgrade is always removing of old bugs to make room for new bugs.
Try this, maybe your problem will be resolved.
by enk
Tue May 03, 2011 11:36 pm
Forum: General
Topic: Advance Routing Failover
Replies: 1
Views: 454

Re: Advance Routing Failover

can anyone brief this link
http://wiki.mikrotik.com/wiki/Advanced_ ... _Scripting

like how to setup host1 and host2 in mikrotik
i have tried this but its not working.

Arman
Dude, it is just an ip-address. Replace Host1 and Host2 with yours ))))
by enk
Tue May 03, 2011 11:32 pm
Forum: Forwarding Protocols
Topic: OSPF Multi-area without virtual links.
Replies: 1
Views: 982

Re: OSPF Multi-area without virtual links.

Hi all,

Can anyone deploy an OSPF multi-area (3 or more consecutive areas) topology without virtual links (virtual links has a bug since 3.30 routing-test)?
is it possible with EoIP or VPLS tunnels?

Thanks.
I think it is possible with IPIP or GRE tunnels.
by enk
Tue May 03, 2011 11:30 pm
Forum: General
Topic: pptp connection as default route (gateway)
Replies: 4
Views: 1455

Re: pptp connection as default route (gateway)

Maybe you facing up with MTU problem. try to lower TCP MSS througth firewall mangle.
by enk
Tue May 03, 2011 11:24 pm
Forum: General
Topic: GRE is not encrypted using IPSEC
Replies: 4
Views: 2520

Re: GRE is not encrypted using IPSEC

Good day! Configure IPSEC tunnel between Mikrotik 750G [192.168.200.129] with latest RouterOS 5.1 and Cisco 1841 [192.168.200.130]. When using GRE tunnel there is a problem: Mikrotik does not encrypt packets GRE, protocol 47, for a given policy / ip ipsec policy add action = encrypt disabled = no d...
by enk
Tue May 03, 2011 11:15 pm
Forum: General
Topic: Multiple PPPOE client
Replies: 2
Views: 674

Re: Multiple PPPOE client

My ISP provides 8 IPs for me, but I can only get it through PPPoE client. My initial setup for single PPPoE client + masquerade is working, but I decided to have more public IPs and assign them to internal computers. In SRC-NAT, I need to translate private IPs to public IPs, but my public IPs are d...
by enk
Tue May 03, 2011 11:09 pm
Forum: General
Topic: PPtP configuration assistance
Replies: 1
Views: 330

Re: PPtP configuration assistance

Harold, it is hard to understan your requirements. Maybe you can provide us with some sort of diagram? There is no actual problem with pptp-client setup.
by enk
Tue May 03, 2011 11:03 pm
Forum: General
Topic: Neighbour not showing all attached routerboards, why?
Replies: 3
Views: 715

Re: Neighbour not showing all attached routerboards, why?

Please provide us with your firewall configuration. Maybe the issue is with blocked udp/5678 port.
by enk
Tue May 03, 2011 11:01 pm
Forum: General
Topic: RB450 as a PPPoE server
Replies: 2
Views: 991

Re: RB450 as a PPPoE server

Hello guys. So, my question is: how many connected users can I get using a RB450? ... PS: I'm also running OSPF and marking some Squid HIT packets to bypass the default customer queuing. PS 2: All authentication types were enabled before and some customers were connecting using "MPPE128 stateless/s...
by enk
Tue May 03, 2011 10:30 pm
Forum: Forwarding Protocols
Topic: [how to] covert any address to internal ip address
Replies: 2
Views: 876

Re: [how to] covert any address to internal ip address

hello , please help me to convert my http file transfer server to any address I need to use internal ip address like 192.168.128.27 to open when any client in the network type http://www.trk-server.com i tried to use dns but not working when I try DNS method in old version mikrotikOS like 2.9.27 .....
by enk
Sun Aug 01, 2010 2:42 pm
Forum: General
Topic: System clock ticks too fast
Replies: 12
Views: 1367

Re: System clock ticks too fast

as I know nothing. I'll try to ask rus123 about it.
UPD: bug was fixed in 5.0beta
Why can't DEV team backport this fixes to 4.11?
by enk
Sun Aug 01, 2010 2:32 pm
Forum: Forwarding Protocols
Topic: OSPF dropping routes v4.x
Replies: 42
Views: 8849

Re: OSPF dropping routes v4.x

RoS 4.11 is out, but still no results...
UPD: bug was fixed in 5.0beta
Why can't DEV team backport this fixes to 4.11?
by enk
Sun Aug 01, 2010 2:31 pm
Forum: General
Topic: System clock ticks too fast
Replies: 12
Views: 1367

Re: System clock ticks too fast

BTW:
http://forum.mikrotik.com/viewtopic.php ... 51&start=0
seems this is nstream-related bug...
by enk
Sun Aug 01, 2010 2:25 pm
Forum: General
Topic: System clock ticks too fast
Replies: 12
Views: 1367

Re: System clock ticks too fast

I mean, does anyone know that BR230 has this problem? did you write to support@?
Yes. MT support has been notified about this bug some months ago. It'is not fixed since 4.4.
by enk
Sun Aug 01, 2010 2:23 pm
Forum: General
Topic: System clock ticks too fast
Replies: 12
Views: 1367

Re: System clock ticks too fast

RB230? does anyone know that? =) This is old MikroTik x86 based router. BTW: /system routerboard> print routerboard: yes model: "230r3" serial-number: "hidden" current-firmware: "1.3.8 (apr/02/2008 10:56:39)" upgrade-firmware: "1.3.8 (apr/02/2008 10:56:39)" There is latest firmware.
by enk
Sun Aug 01, 2010 2:12 pm
Forum: General
Topic: System clock ticks too fast
Replies: 12
Views: 1367

Re: System clock ticks too fast

RoS 4.11 is out. RB230 is still running 10 times faster....
/system hardware
set multi-cpu=no
is not helpful. What's wrong with my old boards?
by enk
Mon Mar 23, 2009 9:53 am
Forum: Forwarding Protocols
Topic: Unsupported OSPF version ?!
Replies: 3
Views: 1606

Re: Unsupported OSPF version ?!

OK. this is interesting.
by enk
Sun Mar 22, 2009 9:53 pm
Forum: Wireless Networking
Topic: A new bug in 3.22?!
Replies: 14
Views: 1944

Re: A new bug in 3.22?!

describe your problem in email for support, also attach supout.rif file.
by enk
Sun Mar 22, 2009 3:31 pm
Forum: Forwarding Protocols
Topic: Unsupported OSPF version ?!
Replies: 3
Views: 1606

Re: Unsupported OSPF version ?!

please, provide more info about your IOS version, configuration and topology.
by enk
Sun Mar 22, 2009 3:30 pm
Forum: Forwarding Protocols
Topic: 3.22 routing test bgp prepending
Replies: 3
Views: 2730

Re: 3.22 routing test bgp prepending

wait for 3.23, maybe this issue will be fixed.
Version 3.23 is running on demo.mt.lv already.
by enk
Sun Mar 22, 2009 3:25 pm
Forum: Wireless Networking
Topic: 802.11n ... ?
Replies: 3
Views: 954

Re: 802.11n ... ?

BTW,
[offtopic]
Wiki search is not working correctly. For example, try to searchkeyword "routing"
http://wiki.mikrotik.com/wiki/Special:S ... ch=routing
result: there is no such page
[/offtopic]
by enk
Sun Mar 22, 2009 3:19 pm
Forum: Scripting
Topic: enable/disable
Replies: 2
Views: 513

Re: enable/disable

use scripts and scheduling for this purpose.
look at this: http://wiki.mikrotik.com/wiki/Scripts
by enk
Sun Mar 22, 2009 1:21 pm
Forum: General
Topic: MT on virtualbox?
Replies: 14
Views: 3720

Re: MT on virtualbox?

i think it is not possible with latest version because of routeros anticrack defence.
try to install earlier version like 3.13.
by enk
Sun Mar 22, 2009 1:15 pm
Forum: General
Topic: Network Planning/Routing Help
Replies: 6
Views: 901

Re: Network Planning/Routing Help

BGP is not right coise for this purpose.BGP mostly for routing between autonomous systems of ISP. For you needs try to use OSPF/Ripng
by enk
Sun Mar 22, 2009 1:12 pm
Forum: General
Topic: [Bug] Inverse address-list not work with Layer7-protocol
Replies: 6
Views: 834

Re: [Bug] Inverse address-list not work with Layer7-protocol

contact with support if you think this is the bug, also send supout.rif
by enk
Sun Mar 22, 2009 1:11 pm
Forum: General
Topic: DHCP Problem
Replies: 2
Views: 426

Re: DHCP Problem

check that udp port 67 reachable from client and udp port 68 reachable from dhcp server. Also check that broadcast addresses is not filtered.
by enk
Thu Mar 19, 2009 10:26 am
Forum: General
Topic: multiple gateways, same gateway IP
Replies: 5
Views: 1217

Re: multiple gateways, same gateway IP

please provide a bit more information about you configuration.
As how as i understood you have such scheme:

mt --- ether 1 --- ISP ip x.x.x.x (same subnet and address)
|
|
ether2
|
|
ISP ip ip x.x.x.x (same subnet and address)

Is this correct?
by enk
Wed Mar 18, 2009 5:10 pm
Forum: General
Topic: PPTP connection drops when user has Linksys wireless router
Replies: 26
Views: 11832

Re: PPTP connection drops when user has Linksys wireless router

try to test your linksys router with native linux pptpd.
We have found similar problem with Zyxel P330W, when encryption enabled. But with linux pptpd this problem exists too.
by enk
Wed Mar 18, 2009 3:29 pm
Forum: General
Topic: 3.22 Installation from the dude
Replies: 4
Views: 648

Re: 3.22 Installation from the dude

ask support.
by enk
Wed Mar 18, 2009 1:18 pm
Forum: General
Topic: 3.22 Installation from the dude
Replies: 4
Views: 648

Re: 3.22 Installation from the dude

RouterOS package format has been changed. Wait for new Dude version that fix it.
by enk
Tue Mar 17, 2009 1:01 pm
Forum: Wireless Networking
Topic: Does the R5H work with the XR5 in Turbo (40 MHz) mode?
Replies: 1
Views: 559

Re: Does the R5H work with the XR5 in Turbo (40 MHz) mode?

if all of this works under RouterOS - then yes.
by enk
Tue Mar 17, 2009 12:54 pm
Forum: General
Topic: 2 Wan Failover with 1:1 NAT to Internal LAN
Replies: 2
Views: 1030

Re: 2 Wan Failover with 1:1 NAT to Internal LAN

use configuration like this /ip route add dst-address=0.0.0.0/0 gateway=123.123.123.123 check-gateway=ping /ip route add dst-address=0.0.0.0/0 gateway=wan2_gateway_ip distance=2 /ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no src-address=10.0.0.2 replace wan2_gateway_ip wi...
by enk
Mon Mar 16, 2009 9:23 pm
Forum: General
Topic: trying to mark/identify ssh and sftp traffic
Replies: 1
Views: 592

Re: trying to mark/identify ssh and sftp traffic

you can't identify ssh or sftp by dscp (ex tos) if somebody or somethins is not marked it for you before.
You can identify ssh/sftp traffic by destination port (22) and protocol (tcp) or by special L7 filter pattern.
by enk
Mon Mar 16, 2009 4:06 pm
Forum: Scripting
Topic: API login problem on RB133
Replies: 19
Views: 6016

Re: API login problem on RB133

try to insert pauses between connections attempts.
by enk
Mon Mar 16, 2009 4:02 pm
Forum: The Dude
Topic: Charting Cisco ASA Connections
Replies: 2
Views: 812

Re: Charting Cisco ASA Connections

It's been a bit over a month on this issue, and wanted to bring it back around in case anyone had any ideas on a workaround/resolution.
write to the support.
by enk
Mon Mar 16, 2009 3:47 pm
Forum: General
Topic: 3.22 released
Replies: 43
Views: 6254

3.22 released

RouterOS 3.22 has been released today. What's new in 3.22: *) added advanced switch features for RB450G; *) added support for MetaROUTER on RB450G; *) added support for adding physical interfaces to Metarouters; *) added set-bgp-prepend-path action to routing filters; *) added WinBox OSPFv3 support ...
by enk
Mon Mar 16, 2009 3:40 pm
Forum: RouterBOARD hardware
Topic: RB616
Replies: 17
Views: 6775

Re: RB616

What is the RB616 mentioned in the 3.22 release notes ?
so where did you get this release note? =)
by enk
Mon Mar 16, 2009 3:39 pm
Forum: General
Topic: Will routeros properly run on this x86 system?
Replies: 11
Views: 947

Re: Will routeros properly run on this x86 system?

Most likely yes, but I would recommend RB1000
by enk
Mon Mar 16, 2009 3:34 pm
Forum: Forwarding Protocols
Topic: BGP auto-summary
Replies: 4
Views: 2146

Re: BGP auto-summary

maybe
submenu /routing bgp aggregate
summary-only (yes | no; Default: yes)
whether to suppress advertisements of all routes that fall within the range of this aggregate
by enk
Mon Mar 16, 2009 3:30 pm
Forum: General
Topic: Help Please
Replies: 3
Views: 768

Re: Help Please

Iwant that all of my clients see as Real IP, only the IP from the 1st ISP.
I think this is impossible.
by enk
Mon Mar 16, 2009 3:28 pm
Forum: The Dude
Topic: Chart error
Replies: 2
Views: 575

Re: Chart error

send email with with supout.rif to support [a] mikrotik.com and describe your problem if you think this is dude chart bug.
by enk
Mon Mar 16, 2009 2:59 pm
Forum: General
Topic: multi wan load balancing - ADSL, DSL, Cable modem
Replies: 3
Views: 6392

Re: multi wan load balancing and aggregating?

try to search http://forum.mikrotik.com/search.php?st=0&sk=t&sd=d&keywords=load+balancing take for example this article: http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways but if you don like group users, try to make as follow: /ip firewall mangle add action=mark-routing chain=prero...
by enk
Mon Mar 16, 2009 2:54 pm
Forum: Beginner Basics
Topic: Mikrotik 1000u -setting up ether ports
Replies: 2
Views: 410

Re: Mikrotik 1000u -setting up ether ports

try this /ip hotspot add address-pool=dhcp_pool3 addresses-per-mac=2 disabled=no idle-timeout=none \ interface=ether4 keepalive-timeout=none name=server3 profile=hsprof1 add address-pool=dhcp_pool2 addresses-per-mac=2 disabled=no idle-timeout=none \ interface=ether3 keepalive-timeout=none name=serve...
by enk
Sun Mar 15, 2009 7:46 pm
Forum: RouterBOARD hardware
Topic: routerboard 1000 PPTP stopped
Replies: 4
Views: 679

Re: routerboard 1000 PPTP stopped

Hi,

I have solve the problem by retyping pptp user password and pressing OK in winbox.
thanks.
very funny
by enk
Sun Mar 15, 2009 7:45 pm
Forum: RouterBOARD hardware
Topic: Kernel failure with ROS 3.20 in 433AH
Replies: 3
Views: 1152

Re: Kernel failure with ROS 3.20 in 433AH

Try to upgrade your firmware. Do you have such problem with 3.13, if no - then this is 3.20 bug.
by enk
Sun Mar 15, 2009 7:42 pm
Forum: RouterBOARD hardware
Topic: RB133 and r52-350
Replies: 3
Views: 1499

Re: RB133 and r52-350

Check your minipci connectors on RB. Replug Radiocard. Replace first with the secons and so on.
by enk
Sun Mar 15, 2009 7:34 pm
Forum: General
Topic: How to create multiple EoIP tunnels ?
Replies: 19
Views: 9747

Re: How to create multiple EoIP tunnels ?

if you truly want to pass broadcasts and bridge the two networks you shouldnt place any IP address on the EoIP tunnel itself (other than its outside endpoints) and just bridge those interfaces to the LANs on each side. Both sides can then use the same subnets. 192.168.1.0/24 (LAN A)--->10.10.10.1/2...
by enk
Sun Mar 15, 2009 7:21 pm
Forum: General
Topic: Lost packets over IPsec tunnel
Replies: 3
Views: 838

Re: Lost packets over IPsec tunnel

Add this logging rule for debug:
 /system logging add action=memory topics=ipsec,debug
then post here your debug messages
by enk
Sun Mar 15, 2009 7:17 pm
Forum: General
Topic: Will routeros properly run on this x86 system?
Replies: 11
Views: 947

Re: Will routeros properly run on this x86 system?

What is the purpose of this system?
by enk
Sat Mar 14, 2009 8:36 pm
Forum: General
Topic: demo.mt.lv & demo2.mt.lv
Replies: 2
Views: 543

Re: demo.mt.lv & demo2.mt.lv

now it should work.
thank you
by enk
Sat Mar 14, 2009 6:00 pm
Forum: General
Topic: demo.mt.lv & demo2.mt.lv
Replies: 2
Views: 543

demo.mt.lv & demo2.mt.lv

What's with demo routers? Can anybody access them?
by enk
Sat Mar 14, 2009 2:30 pm
Forum: General
Topic: SSHv2 MikroTik to Cisco device
Replies: 3
Views: 1429

SSHv2 MikroTik to Cisco device

Hello, MikroTik Team!
Does RouterOS support SSHv2?
I can't acces cisco router with sshv2 enabled via routeros terminal:
 
Enabling compatibility mode for protocol 2.0
no hostkey alg

Welcome back!
Can you add this capability to routeros?
by enk
Sat Mar 14, 2009 2:23 pm
Forum: General
Topic: ROS 3.22
Replies: 2
Views: 783

Re: ROS 3.22

can you share your packages please? f.e. upload to rapidshare?
by enk
Fri Mar 13, 2009 2:35 pm
Forum: General
Topic: RoS 3.22 sftp bugs
Replies: 10
Views: 2224

Re: RoS 3.22 sftp bugs

OK, i'm waiting for new version =)
by enk
Fri Mar 13, 2009 1:54 pm
Forum: General
Topic: RoS 3.22 sftp bugs
Replies: 10
Views: 2224

Re: RoS 3.22 sftp bugs

I don't know exactly which.
But your fixes cause sftp not working. I think it should be able to communicate (initialize communication) with RoS via sftp and list directory content according to file and directories permissions. Your fixes disallow this at all. It is not correct way ;)
by enk
Fri Mar 13, 2009 11:15 am
Forum: General
Topic: RoS 3.22 sftp bugs
Replies: 10
Views: 2224

Re: RoS 3.22 sftp bugs

your fixes cause putty sftp executable to fail after "ls" command.
sftp should be functional with read permissions, like ssh if your defined read privileges for group demo.
Image
Image
by enk
Fri Mar 13, 2009 10:57 am
Forum: General
Topic: RoS 3.22 sftp bugs
Replies: 10
Views: 2224

Re: RoS 3.22 sftp bugs

Sympathizing with you. I understand that you are very loaded in connection with the issuance of 3.22.
by enk
Fri Mar 13, 2009 10:25 am
Forum: General
Topic: RoS 3.22 sftp bugs
Replies: 10
Views: 2224

Re: RoS 3.22 sftp bugs

all your reports were accepted and some already fixed, don't worry!
I like MikroTik. Thanks! But you could respond by email - i would not worry ;)
by enk
Fri Mar 13, 2009 10:01 am
Forum: General
Topic: RoS 3.22 sftp bugs
Replies: 10
Views: 2224

RoS 3.22 sftp bugs

Hello, MikroTik Team! This message was writted to support by email, but no reply was sent... I have found some bugs in version 3.22 (and earlier). Yes, in 3.22! 1. Let's look at demo.mt.lv or demo2.mt.lv. group demo can access via ssh, but not via ftp. ssh means sftp also! With help of sftp we can r...
by enk
Thu Mar 12, 2009 9:09 am
Forum: RouterBOARD hardware
Topic: RB433U When ?
Replies: 15
Views: 2358

Re: RB433U When ?

RB433 with USB?
by enk
Fri Feb 20, 2009 11:51 pm
Forum: Forwarding Protocols
Topic: Cheapest MPLS router?
Replies: 15
Views: 8655

Re: Cheapest MPLS router?

Let's start from known developers:

Cisco
Juniper
Alcatel-Lucent
LG (MSR-40)
3Com (MSR 20-40)
Riverstone
Huawei
H3C
RAD
Dax
CYB (MP8600)

I think less known products should be cheaper.
by enk
Thu Feb 19, 2009 8:29 pm
Forum: General
Topic: block all ports except 80
Replies: 1
Views: 1725

Re: block all ports except 80

/ip firewall filter add action=accept chain=forward comment="Established connections" connection-state=established disabled=no add action=accept chain=forward comment="Related connections" connection-state=related disabled=no add chain=forward dst-port=80 protocol=tcp action=drop disabled=no add ch...
by enk
Thu Feb 19, 2009 8:20 pm
Forum: General
Topic: vpn config
Replies: 1
Views: 410

Re: vpn config

by enk
Thu Feb 19, 2009 8:15 pm
Forum: Forwarding Protocols
Topic: Cheapest MPLS router?
Replies: 15
Views: 8655

Re: Cheapest MPLS router?

Do you mean routers with hardware acceleretion of MPLS?
by enk
Thu Feb 19, 2009 1:14 pm
Forum: General
Topic: OSPF issue with 3.15+ Works fine with 3.13
Replies: 10
Views: 3945

Re: OSPF issue with 3.15+ Works fine with 3.13

Have you set the router id? It seems to be important on 3.15+ I also think ospf seems more unreliable on the newer versions. Router ID should be set up automatically by router (highest ip address), if this option is not set manually. If not so, this is the issue of RouterOS 3.15+. What's with 3.20?
by enk
Mon Feb 09, 2009 2:11 pm
Forum: General
Topic: IPSec VPN stops external communication
Replies: 11
Views: 1674

Re: IPSec VPN stops external communication

try to configure as shown in this article:
http://wiki.mikrotik.com/wiki/MikroTik_ ... wall_IPSEC
by enk
Sat Feb 07, 2009 6:17 pm
Forum: General
Topic: BGP routing - how can I manually weight a route?
Replies: 4
Views: 745

Re: BGP routing - how can I manually weight a route?

In Cisco it's needed to create route-map and add AS-PATH prepend. Your AS route should look like AS65535 - AS65535 - AS65535. Besides that you should to filter required prefixes and apply route-map for it.
Some information here: http://wiki.mikrotik.com/wiki/BGP
by enk
Mon Oct 20, 2008 8:36 pm
Forum: General
Topic: Having issues since updating to 3.15
Replies: 5
Views: 1007

Re: Having issues since updating to 3.15

Try to use newest winbox 2.2.13 first. Download it here: http://www.mikrotik.com/download/winbox.exe
by enk
Fri Oct 17, 2008 9:26 am
Forum: General
Topic: routeros notification
Replies: 1
Views: 501

routeros notification

In the routeros notification email attached 3.14 torrent.
by enk
Tue Oct 14, 2008 3:38 pm
Forum: General
Topic: Feautures Request - Wiki Page: Vote for feautures!
Replies: 5
Views: 1289

Re: Feautures Request - Wiki Page: Vote for feautures!

I think it would be convenient for both: 1) Safe mode activates automatically 2) You make some changes 3) type commit (exit from safe mode) 4) configuration became applied to router 3.1) if you type commit 1m (exit from safe mode) 4.1) configuration became applied to router 5.1) if not confirmed in ...
by enk
Tue Oct 14, 2008 9:53 am
Forum: General
Topic: Feature Request : TFTP server
Replies: 27
Views: 7489

Re: Feature Request : TFTP server

I'll add my voice to the request Normis. I just had a potential customer call asking for a tftp server.
Tom
Add your voice here:
http://wiki.mikrotik.com/wiki/MikroTik_ ... e_Requests
by enk
Mon Oct 13, 2008 4:26 pm
Forum: General
Topic: Feautures Request - Wiki Page: Vote for feautures!
Replies: 5
Views: 1289

Re: Feautures Request - Wiki Page: Vote for feautures!

about save mode - it will be activated automatically
by enk
Mon Oct 13, 2008 2:03 pm
Forum: General
Topic: Feautures Request - Wiki Page: Vote for feautures!
Replies: 5
Views: 1289

Re: Feautures Request - Wiki Page: Vote for feautures!

about features requested

configuration rollback:
/system backup save file=theName does not work?
safe mode does not work?

or where is problem?
I mean rollback like in JunOS (Juniper routers).
For example, there is 10 slots, where 10 configs stored automatically after commit.
by enk
Mon Oct 13, 2008 10:58 am
Forum: General
Topic: Feautures request: Configuration
Replies: 1
Views: 791

Feautures request: Configuration

1) Ability to use configuration candidate (use "commit" - for apply, "commit configrmed 1" - to rollback configuration if not confirmed in 1 minute, "commit at dd:hh:mm" - delayed confirm) 2) change password after new install 3) change password if there is no password set 4) export password as md5-h...
by enk
Thu Oct 09, 2008 3:38 pm
Forum: The Dude
Topic: Vote for new DUDE features!
Replies: 117
Views: 47033

Re: Vote for new DUDE features!

Please add: 1) ability to monitor rx/tx signal strength like bit rate rx/tx with checkbox (Votes: 7) 2) ability to upgrade BIOS through The Dude like RouterOS (Vote: 1) 3) ability to use periodical service monitoring (f.e from 9:00 am to 18:00 pm). Useful for CPE routers which can be shutdowned by c...
by enk
Thu Oct 02, 2008 4:21 pm
Forum: General
Topic: Adding Routes with DHCP
Replies: 10
Views: 2936

Re: Adding Routes with DHCP

upgrade, 2.9.27 is unsupported. 2.9.51 is free and fixes many of those issues.

If he uses 2.9.27, it is likely that he has cracked version. Why do you say that 2.9.51 free? =)
by enk
Thu Oct 02, 2008 3:51 pm
Forum: General
Topic: More ways to earn free licenses!
Replies: 162
Views: 73822

Re: More ways to earn free licenses!

You would like to say my video is not so good? Why? =( I'm dissapointed...
Both my videos in Highest Rated. One of them with callouts like tutorial!
by enk
Thu Oct 02, 2008 3:35 pm
Forum: General
Topic: More ways to earn free licenses!
Replies: 162
Views: 73822

Re: More ways to earn free licenses!

I have uploaded 2 videos today ("RIP example" and
"ROS in VirtualPC"), but recieved only one license. What's wrong?
by enk
Thu Oct 02, 2008 11:11 am
Forum: Beginner Basics
Topic: Tiktube.com is back!
Replies: 15
Views: 8844

Re: Tiktube.com is back!

Strange...

Select video file:
"D:\VideoProjects\virtualpc.avi"
Possible file formats: wmv, avi, 3gp, mpeg, mov, mkv, ogm, mpg, m4v, mp4

"Incorrect filename!"
by enk
Thu Sep 18, 2008 3:36 pm
Forum: General
Topic: SNMP Support
Replies: 3
Views: 699

Re: SNMP Support

as i know, there is basic security implemented in 3.14rc1 (MD5 auth, DES encryption etc.)
http://en.wikipedia.org/wiki/SNMP
by enk
Thu Sep 18, 2008 3:23 pm
Forum: General
Topic: SNMP Support
Replies: 3
Views: 699

Re: SNMP Support

Yes, it is supported in 3.14rc1
by enk
Fri Sep 12, 2008 4:35 pm
Forum: General
Topic: RouterOS v3.14rc1 released
Replies: 42
Views: 5510

Re: RouterOS v3.14rc1 released

1) system reset-configuration works fine for me. Maby in level 4,5,6 only? Not for demo? [admin@MikroTik] > system reset-configuration Dangerous! Reset anyway? [y/N]: y system configuration will be reset RouterBIOS-200 v1.3.8 MikroTik (tm) 2003-2005 RouterBOARD 220 (CPU revision B1) CPU frequency: ...
by enk
Fri Sep 12, 2008 3:56 pm
Forum: General
Topic: RouterOS v3.14rc1 released
Replies: 42
Views: 5510

Re: RouterOS v3.14rc1 released

What exactly you are talking about ? Oh, sorry. My mistake. Another problem: 1) default ip address is not setup after /system reset 2) new password is not requested after /system reset 3) strange problem with snmp on x86 rb230 ros 3.14rc1: snmpwalk -c public -v 1 192.168.88.1 End of MIB /snmp set c...
by enk
Fri Sep 12, 2008 3:45 pm
Forum: General
Topic: RouterOS v3.14rc1 released
Replies: 42
Views: 5510

Re: RouterOS v3.14rc1 released

3.14 rc1 "cosmetic bug":
1) in /ip neighbor 3.14rc1 looks like 3.13.
2) even password was set, 3.14rc1 requires to install a new password.
by enk
Fri Sep 12, 2008 3:36 pm
Forum: General
Topic: RouterOS v3.14rc1 released
Replies: 42
Views: 5510

Re: RouterOS v3.14rc1 released

changelog is never full
Ok. 3.14rc1 changelog in not full.
by enk
Fri Sep 12, 2008 3:29 pm
Forum: General
Topic: RouterOS v3.14rc1 released
Replies: 42
Views: 5510

Re: RouterOS v3.14rc1 released

What's about export improvments?
What's about snmp improvments?
Changelog is not full.
by enk
Fri Sep 12, 2008 12:40 pm
Forum: General
Topic: RB433AH and cisco catalyst 3524 XL
Replies: 2
Views: 758

Re: RB433AH and cisco catalyst 3524 XL

what does says "show interface FastEther0/x" ?
is there errors or collisions? duplex? speed?
by enk
Thu Sep 11, 2008 7:49 pm
Forum: General
Topic: Queue simple.
Replies: 5
Views: 876

Re: Queue simple.

Hello!

Is any queue simple rules limitation?
Maybe my version of MKRT (2.9.27) support only 50?
maybe... try to use newest version =)
by enk
Thu Sep 11, 2008 12:42 pm
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

Run
nmap -sV -p 2000 Mikrotik_ROUTER_IP
and wait about 1min..
Which version of nmap do you use? Which version of routeros do you use? router architecture (ppc, mipsel, mipsbe, x86)?
Did not works with nmap 4.68, 4.75 and routeros 3.18 on mipel.
by enk
Tue Sep 09, 2008 12:30 pm
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

how will we know if that 800x600px video is not actually an uncompressed MPEG2, but some small sized screencast? about the "bug". the only bug here is that snmp-write is enabled by default, and is not documented. you don't need this fancy program, just this command would suffice: snmpset -c public ...
by enk
Tue Sep 09, 2008 11:28 am
Forum: General
Topic: Screwed up my license?
Replies: 11
Views: 2219

Re: Screwed up my license?

IMHO, I believe the software ID is based on the hard drive/storage drive only. If you didn't change the HD, then the software ID shouldn't change. SOFT-ID is based on storage serial number partly. If you use somthing like eraser or reformat your storage with owerwrite process - soft-id will be chan...
by enk
Tue Sep 09, 2008 9:57 am
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

maybe we will make screencast size support in new tiktube
It is great idea! I will wait for that. I have a lot of training videos for RouterOS, which I would like to share.
normis, what's about the license for the author of the exploit?
by enk
Mon Sep 08, 2008 7:41 pm
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

rapidshare sucks : ) PS - What we still don't know is if anything else is writable. Changing system identity isn't a big deal but it sure is if you could use this to do anything else. rapidshare is best than disfunctional tiktube =) I'll try to find somthing more than "/system identity". Just wait ...
by enk
Mon Sep 08, 2008 5:05 pm
Forum: General
Topic: Correct dstnat setup
Replies: 2
Views: 957

Re: Correct dstnat setup

Maybe misunderstood, but try to use netmap instead: /ip firewall nat add action=src-nat chain=srcnat comment="" disabled=no src-address=\ 10.4.1.0/24 to-addresses=144.92.249.226 add action=src-nat chain=srcnat comment="" disabled=no src-address=10.4.2.2 \ to-addresses=44.92.249.228 add action=netmap...
by enk
Mon Sep 08, 2008 4:28 pm
Forum: General
Topic: Major problems with webproxy!
Replies: 7
Views: 1461

Re: Major problems with webproxy!

We confirmed that described behaviour is a bug, it'will be fixed at 3.14 version.
When does version 3.14 became avaible?
by enk
Mon Sep 08, 2008 4:23 pm
Forum: General
Topic: RB1000?
Replies: 2
Views: 773

Re: RB1000?

Hi,

there's silence on RB1000 here. Should be available now?
Noone uses it?
It's avaible already =)
by enk
Mon Sep 08, 2008 4:10 pm
Forum: General
Topic: Upgrading fron 2.9.x to 3.x - How to succeed every time
Replies: 8
Views: 2036

Re: Upgrading fron 2.9.x to 3.x - How to succeed every time

00:00:17 system,info installed routeros-mipsle-3.13 00:00:21 system,info enabled routing-3.13 00:00:21 system,info router rebooted 00:00:34 system,info,account user admin logged in via local 00:00:47 system,info filter rule added 00:00:48 system,info nat rule added 00:01:03 system,info hotspot walle...
by enk
Mon Sep 08, 2008 1:23 pm
Forum: General
Topic: Upgrading fron 2.9.x to 3.x - How to succeed every time
Replies: 8
Views: 2036

Re: Upgrading fron 2.9.x to 3.x - How to succeed every time

Could you provide with more detailed information about the configuration, when upgrade from v2 to v3 isn't working on the fly.
example: rb112 with RoS 2.9.46, 2.9.50 or 2.9.51. Hotspot service configured. I have provided some details in e-mail for support.
by enk
Sun Sep 07, 2008 7:09 pm
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

I'm not satisfied that that filter will stop variations of this exploit. Everyone has the source code for it, so they could alter it in any way that is effective. Butch's idea to stop snmp as it comes in to your network will reduce 99% of the risk. I must repeat - exploit is not harmful! And my L7-...
by enk
Sat Sep 06, 2008 5:38 pm
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

Don't worry. This exploit is not malicious or harmful, just proof of concept code. This is feauture, not a bug in the clear way=) BTW you can specify hardguessing snmp community and filter requests with L7 filter: /ip firewall layer7-protocol add comment="snmp-set request filter by shados" name="snm...
by enk
Sat Sep 06, 2008 11:12 am
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write vulnirability

successfully tested on 3.13 powerpc (rb333).
by enk
Fri Sep 05, 2008 12:36 pm
Forum: General
Topic: MicroTik RouterOS 3.13 SNMP write vulnirability
Replies: 37
Views: 12275

Re: MicroTik RouterOS 3.13 SNMP write (Set request) PoC

don't make me laugh =)
by enk
Thu Sep 04, 2008 1:59 pm
Forum: General
Topic: snmp-write
Replies: 0
Views: 524

snmp-write

Does anybody know about an opportunity to write to snmp-mib in RouterOS 3.x? Is it officialy supported?
by enk
Tue Sep 02, 2008 5:02 pm
Forum: General
Topic: worrying about the future of wifi
Replies: 22
Views: 4095

Re: worrying about the future of wifi

what's about turbo mode?
by enk
Tue Sep 02, 2008 1:43 pm
Forum: RouterBOARD hardware
Topic: Reinstalling routeros
Replies: 8
Views: 2130

Re: Reinstalling routeros

I did get the bios. I reinstalled the software to the latest version. Now it says I dont have a software key. It will stop functioning in 24hrs. They RB133C comes with a license.
Try to use your account (or register) on http://www.mikrotik.com:
request key -> Software ID
by enk
Tue Sep 02, 2008 1:37 pm
Forum: General
Topic: MTU, Netbios Hangs and Radmin close connections
Replies: 3
Views: 1034

Re: MTU, Netbios Hangs and Radmin close connections

What RouterOS version do you use?
by enk
Tue Aug 19, 2008 3:24 pm
Forum: General
Topic: DSCP prerouting
Replies: 0
Views: 575

DSCP prerouting

Checked with sniffer that routeros 3.13 can't set up DSCP field in prerouting chain.
This is a bug or feature? Please explain.
by enk
Mon Aug 18, 2008 11:34 pm
Forum: General
Topic: File list display bug in 3.13
Replies: 3
Views: 925

Re: File list display bug in 3.13

all fine on rb333
by enk
Mon Aug 18, 2008 11:23 pm
Forum: General
Topic: routeros <= 3.13 export bug
Replies: 0
Views: 568

routeros <= 3.13 export bug

Hello! I have detected the bug in Mikrotik RouterOS 3.13 and earlier versions. Error is in the wrong export settings (f.e. snmp). Thus, if the snmp-community contains special characters such as "," then not be able to restore the configuration. Such a mistake, connectivity with the special character...
by enk
Fri Aug 15, 2008 9:16 am
Forum: General
Topic: v3.12 crashing on x86
Replies: 42
Views: 10212

Re: v3.12 crashing on x86

I think it is good idea to create beta (release candidate) testers team for such issues. MT team can give us free licenses for such work =)
by enk
Tue May 27, 2008 10:21 am
Forum: General
Topic: CF not working RB1000 ROS 3.6
Replies: 8
Views: 1665

Re: CF not working RB1000 ROS 3.6

The problem was with access speed. Do not use 133x and 266x CF cards. It is not supported.
by enk
Fri May 23, 2008 8:56 pm
Forum: General
Topic: CF not working RB1000 ROS 3.6
Replies: 8
Views: 1665

Re: CF not working RB1000 ROS 3.6

I have CompactFlash 4G Transcend TS4GCF133, 133X on RB1000 not working with RoS 3.9. CPU frequency: 1333 MHz Memory size: 512 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... Starting services... MikroTik ...
by enk
Wed Feb 27, 2008 10:36 am
Forum: General
Topic: More ways to earn free licenses!
Replies: 162
Views: 73822

Re: More ways to earn free licenses!

Do you need articles in Russian? NOT translations.
by enk
Wed Feb 27, 2008 9:47 am
Forum: General
Topic: BUG in ROS 3.3: vlan interfaces aren't runing after boot!
Replies: 4
Views: 1224

Re: BUG in ROS 3.3: vlan interfaces aren't runing after boot!

I had the same problem with RB532, RB133C, RB511 ROS 3.2, 3.3 after upgrading from 2.9.50.
The problem was resolved - just delete your vlan & eoip interfaces, reboot and recreate it. After next reboot all should be ok.
by enk
Tue Aug 21, 2007 4:37 pm
Forum: General
Topic: Free licenses to anyone...
Replies: 85
Views: 20151

Re: Free Level6 license to anyone...

Also got license.

Thanks MikroTik :D
When you send your video?
I did not recieve license yet =(
by enk
Mon Aug 20, 2007 8:18 am
Forum: General
Topic: Free licenses to anyone...
Replies: 85
Views: 20151

Re: Free Level6 license to anyone...

Is there any need to provide video with callouts (text comments in video)?
We have already send such video with comments and now we are waiting for an answer.