But I still recommend you change your mode to transport.Tunnel mode is set at the request of a network engineer. I tried to use the transport mode.
Thanks, I did not know that the release 5.2 is now available.
I'll try to update.
So there is no possibility to determine chip exactly?
the driver is the same for all those chipsets, this line only shows the driver used.
/int wireless export
wrong? Maybe you have no real experience with routerboard? Please, purchase one with R52 to check it again and than post again ))))wrong R52=AR5414 Check vendor by mac address
/interface wireless print detail
/ip firewall mangle
add action=change-mss chain=forward disabled=no new-mss=1420 protocol=tcp \
tcp-flags=syn
Did you try it? It is fair game. Either you solve the problem or not. Worth a try.Enk, but this is not a solution ...
Try to use dst-nat redirect....
Also try to redirect the traffic with NAT NetMap SMTP and POP traffic to the IP address of the card's internal network server and neither worked.
Someone would know as I could do this? they would appreciate much
Dude, it is just an ip-address. Replace Host1 and Host2 with yours ))))can anyone brief this link
http://wiki.mikrotik.com/wiki/Advanced_ ... _Scripting
like how to setup host1 and host2 in mikrotik
i have tried this but its not working.
Arman
I think it is possible with IPIP or GRE tunnels.Hi all,
Can anyone deploy an OSPF multi-area (3 or more consecutive areas) topology without virtual links (virtual links has a bug since 3.30 routing-test)?
is it possible with EoIP or VPLS tunnels?
Thanks.
Yes. MT support has been notified about this bug some months ago. It'is not fixed since 4.4.I mean, does anyone know that BR230 has this problem? did you write to support@?
/system hardware
set multi-cpu=no
write to the support.It's been a bit over a month on this issue, and wanted to bring it back around in case anyone had any ideas on a workaround/resolution.
so where did you get this release note? =)What is the RB616 mentioned in the 3.22 release notes ?
submenu /routing bgp aggregate
summary-only (yes | no; Default: yes)
I think this is impossible.Iwant that all of my clients see as Real IP, only the IP from the 1st ISP.
very funnyHi,
I have solve the problem by retyping pptp user password and pressing OK in winbox.
thanks.
/system logging add action=memory topics=ipsec,debug
thank younow it should work.
Enabling compatibility mode for protocol 2.0
no hostkey alg
Welcome back!
I like MikroTik. Thanks! But you could respond by email - i would not worryall your reports were accepted and some already fixed, don't worry!
Add your voice here:I'll add my voice to the request Normis. I just had a potential customer call asking for a tftp server.
Tom
I mean rollback like in JunOS (Juniper routers).about features requested
configuration rollback:
/system backup save file=theName does not work?
safe mode does not work?
or where is problem?
upgrade, 2.9.27 is unsupported. 2.9.51 is free and fixes many of those issues.
Ok. 3.14rc1 changelog in not full.changelog is never full
maybe... try to use newest version =)Hello!
Is any queue simple rules limitation?
Maybe my version of MKRT (2.9.27) support only 50?
Which version of nmap do you use? Which version of routeros do you use? router architecture (ppc, mipsel, mipsbe, x86)?Run
nmap -sV -p 2000 Mikrotik_ROUTER_IP
and wait about 1min..
It is great idea! I will wait for that. I have a lot of training videos for RouterOS, which I would like to share.maybe we will make screencast size support in new tiktube
When does version 3.14 became avaible?We confirmed that described behaviour is a bug, it'will be fixed at 3.14 version.
It's avaible already =)Hi,
there's silence on RB1000 here. Should be available now?
Noone uses it?
example: rb112 with RoS 2.9.46, 2.9.50 or 2.9.51. Hotspot service configured. I have provided some details in e-mail for support.Could you provide with more detailed information about the configuration, when upgrade from v2 to v3 isn't working on the fly.
Try to use your account (or register) on http://www.mikrotik.com:I did get the bios. I reinstalled the software to the latest version. Now it says I dont have a software key. It will stop functioning in 24hrs. They RB133C comes with a license.
When you send your video?Also got license.
Thanks MikroTik