MikroTik

enk

I mean, either cisco router allows binding services to specific interface/address and is far away, or it doesn't, and it's not logical, not user-friendly and not usable For RoS it is not logical to binding services to specific interface/address (although sometimes it use this method - pppoe server,...

enk

cisco is far far away from MT. It is not good things to compare...

enk

There is really some kind of problem. Session sets up not quickly. Sometimes policy becomes invalid, enable/disable helps.

enk

There is some kind of problem in RoS I think. But I was able to configure GRE over IPSEC in 5.2
Session sets up not quickly.

enk

Was it helpful?

enk

Tunnel mode is set at the request of a network engineer. I tried to use the transport mode.

Thanks, I did not know that the release 5.2 is now available.
I'll try to update.

But I still recommend you change your mode to transport.

enk

Provide Bug tracking system. Provide complete release notes with detailed information about linux kernels used and packages. Provide complete information about security vulns in RoS. Provide bug description for each confirmed bug (versions affected, fixed versions, workarounds) looks like you are n...

enk

Provide Bug tracking system. Provide complete release notes with detailed information about linux kernels used and packages. Provide complete information about security vulns in RoS. Provide bug description for each confirmed bug (versions affected, fixed versions, workarounds) looks like you are n...

enk

At first try to change you redistribution configuration on each OSPF router like this: /routing ospf set redistribute-static=as-type-1 Explanation: A type 1 route has a metric that is the sum of the internal OSPF cost and the external redistributed cost. A type 2 route has a metric equal only to the...

enk

Only from core router, firs and last router.

enk

the driver is the same for all those chipsets, this line only shows the driver used.

So there is no possibility to determine chip exactly?

enk

Sometimes "unicast key exchange timeout" happens when time is not synchronized between APs. Use NTP for this purpose.

enk

check you RoS versions on both device and wireless settings.
It will be helphful to provide

/int wireless export

enk

I think it would be helpful also to provide /routing ospf neighbor print /routing ospf interface print /ip route print where static Also show us this and above output from the tower 6 (last router in loop). Also please show me output from the core router: /ip route print where static /ip addresses p...

enk

Please priovide us with output of the following commands from console (ssh, new terminal, etc.): /routing ospf export /ip address print It would be really helpful. Please confirm that you would like to use only one shortest path from each router to the modems as the default route and alternative par...

enk

Paraphrasing. demanded a status of certified consultant?

enk

Please draw a basic diagram and post it here. It is hard to understand your topology and requirements without such drawing.

enk

Please draw a basic diagram and post it here. It is hard to understand your topology and requirements without such drawing.

enk

Is there no certified consultants? I'm disappointed. According to http://www.mikrotik.com/consultants.html there is 12 consultants. Please someone reply!

enk

Well, I'm trying with different RouterOS versions to find a 4.xx stable one without this bug, and I'll post the results of my search. BY the way, so far no replies from Mikrotik support but I hope someone is taking care of this issue! 4.xx is based on same kernel and maybe on same daemons. I think ...

enk

wrong R52=AR5414 Check vendor by mac address

wrong? Maybe you have no real experience with routerboard? Please, purchase one with R52 to check it again and than post again ))))

enk

Did you know what RoS is ROUTER OS? For example Cisco ISR's G1 and older (not newer ISR G2, they have more advanced switch modules) with etherswitch module support only crappy old per-vlan STP! I do not think that is is enough, but MSTP is backward compatible with RSTP and STP. So in this case MT Ro...

enk

The next advice will be made by mikrotik team is to upgrade to latest stable version 5.2. Try this.

enk

What do you mean? MPLS penultimate hop popping? As I remember the answer is yes =)

enk

/interface wireless print detail

Here you can see chip like "interface-type=Atheros AR5413" on which card is made. Based on it you can make an assumption what is the radio card. In this case it is R52.

enk

Hi, all, especially MCTs.
Guys, please share your experiences and answer to the quesion. How often do you apply for paid help? How often do you provide consulting services related to Mikrotik?
Thank you in advance.

enk

Post your configs here.

enk

/interface pppoe-client add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 dial-on-demand=no disabled=no interface=\ ether5 max-mru=1480 max-mtu=1480 mrru=disabled name=pppoe-out1 password=test profile=default \ service-name="" use-peer-dns=no user=test /ip addr...

enk

You can apply mac address filters for your pppoe server. In this filter you can define client's addresses for whom allowed to connect (for whom your server allowed to reply with PADO packets).

enk

Hmm... I am not very good with MCAST, but you can replace your's MT mac addresses with your crappy router's mac and sniff multicast ip address group for which you are subscribed. With this information you can try to reproduce configuration on MT.
Somebody please correct me if I wrong.

enk

It is the only way to add ip address to the bridge.

enk

Provide Bug tracking system. Provide complete release notes with detailed information about linux kernels used and packages. Provide complete information about security vulns in RoS. Provide bug description for each confirmed bug (versions affected, fixed versions, workarounds)

enk

RB1000, not RB100. RB100 is crappy old board. RB1000 tested by us to handle up to 300 users with mppe128 encryption. But I don't know actual limitations. I think it is only CPU and Memory dependent. You can use one vrrp group for active/standby failover or you can DNS names and two vrrp groups for a...

enk

physical port on RoS it is Cisco's routed port analog. You can use physical interface to operate with native vlan or you can create logical sub-interfaces (interface vlan in Mikrotik).

enk

Personally I think you have an MTU problem. Try to adjust your TCP MSS like this:

/ip firewall mangle
add action=change-mss chain=forward disabled=no new-mss=1420 protocol=tcp \
    tcp-flags=syn

enk

You can't add multicast mac-address to interface actually. But you can subscribe to multicast group. As I understand you right, you need to recieve IPTV on your computer. So you need to configure PIM routing on your 750. Look at the example here: http://wiki.mikrotik.com/wiki/Multicast_detailed_exam...

enk

please provide us with your xonfiguration detail and diagram if it possible.
You can use bridge filter to protect you users on L2.

enk

Hello how to implement the scheme vlan-per-user on mikrotik 3.20 with ip unnumbered?. komp ----- cisco2950 trunk ------ ether1 mikrotik ether2 ----- internet in the trunk are vlan11-13 on mikrotik created vlan11-13 at ether1. vlan11-13 added to bridge1. bridge1 address is 10.10.10.2/24, komp addres...

enk

The issue is not with tring - please notice that when someone has bgp router, this is not a toy to play with, but equipment used to serve services ... I'vd made update to 5.2 - for now, cpu usage is much higher than in 3.30 and 4.17 - with traffic ~20m it has 60%! when on 4.17 it had ~20%. M. You r...

enk

Enk, but this is not a solution ...

Did you try it? It is fair game. Either you solve the problem or not. Worth a try.

enk

Hi! This is simple task for any network engineer, but I think nobody wants to do your job for you here. If you have problems with implementation, try to hire consultant:
http://www.mikrotik.com/consultants.html

enk

psm, you can use tunnels to brind nonbackbone areas to area 0.
Another variant is to use virtual-links, but it was broken since 3.30, so currently this is not good solution.

enk

We are using central pptp-server on RB1000 and hotspots across the network. Working just fine.

enk

...

Also try to redirect the traffic with NAT NetMap SMTP and POP traffic to the IP address of the card's internal network server and neither worked.

Someone would know as I could do this? they would appreciate much

Try to use dst-nat redirect.

enk

Upgrade is always removing of old bugs to make room for new bugs.
Try this, maybe your problem will be resolved.

enk

can anyone brief this link
http://wiki.mikrotik.com/wiki/Advanced_ ... _Scripting

like how to setup host1 and host2 in mikrotik
i have tried this but its not working.

Arman

Dude, it is just an ip-address. Replace Host1 and Host2 with yours ))))

enk

Hi all,

Can anyone deploy an OSPF multi-area (3 or more consecutive areas) topology without virtual links (virtual links has a bug since 3.30 routing-test)?
is it possible with EoIP or VPLS tunnels?

Thanks.

I think it is possible with IPIP or GRE tunnels.

enk

Maybe you facing up with MTU problem. try to lower TCP MSS througth firewall mangle.

enk

Good day! Configure IPSEC tunnel between Mikrotik 750G [192.168.200.129] with latest RouterOS 5.1 and Cisco 1841 [192.168.200.130]. When using GRE tunnel there is a problem: Mikrotik does not encrypt packets GRE, protocol 47, for a given policy / ip ipsec policy add action = encrypt disabled = no d...

enk

My ISP provides 8 IPs for me, but I can only get it through PPPoE client. My initial setup for single PPPoE client + masquerade is working, but I decided to have more public IPs and assign them to internal computers. In SRC-NAT, I need to translate private IPs to public IPs, but my public IPs are d...

enk

Harold, it is hard to understan your requirements. Maybe you can provide us with some sort of diagram? There is no actual problem with pptp-client setup.

enk

Please provide us with your firewall configuration. Maybe the issue is with blocked udp/5678 port.

enk

Hello guys. So, my question is: how many connected users can I get using a RB450? ... PS: I'm also running OSPF and marking some Squid HIT packets to bypass the default customer queuing. PS 2: All authentication types were enabled before and some customers were connecting using "MPPE128 statel...

enk

hello , please help me to convert my http file transfer server to any address I need to use internal ip address like 192.168.128.27 to open when any client in the network type http://www.trk-server.com i tried to use dns but not working when I try DNS method in old version mikrotikOS like 2.9.27 .....

enk

as I know nothing. I'll try to ask rus123 about it.
UPD: bug was fixed in 5.0beta
Why can't DEV team backport this fixes to 4.11?

enk

RoS 4.11 is out, but still no results...
UPD: bug was fixed in 5.0beta
Why can't DEV team backport this fixes to 4.11?

enk

BTW:
http://forum.mikrotik.com/viewtopic.php ... 51&start=0
seems this is nstream-related bug...

enk

I mean, does anyone know that BR230 has this problem? did you write to support@?

Yes. MT support has been notified about this bug some months ago. It'is not fixed since 4.4.

enk

RB230? does anyone know that? =) This is old MikroTik x86 based router. BTW: /system routerboard> print routerboard: yes model: "230r3" serial-number: "hidden" current-firmware: "1.3.8 (apr/02/2008 10:56:39)" upgrade-firmware: "1.3.8 (apr/02/2008 10:56:39)" T...

enk

RoS 4.11 is out. RB230 is still running 10 times faster....

/system hardware
set multi-cpu=no

is not helpful. What's wrong with my old boards?

enk

OK. this is interesting.

enk

describe your problem in email for support, also attach supout.rif file.

enk

please, provide more info about your IOS version, configuration and topology.

enk

wait for 3.23, maybe this issue will be fixed.
Version 3.23 is running on demo.mt.lv already.

enk

BTW,
[offtopic]
Wiki search is not working correctly. For example, try to searchkeyword "routing"
http://wiki.mikrotik.com/wiki/Special:S ... ch=routing
result: there is no such page
[/offtopic]

enk

use scripts and scheduling for this purpose.
look at this: http://wiki.mikrotik.com/wiki/Scripts

enk

i think it is not possible with latest version because of routeros anticrack defence.
try to install earlier version like 3.13.

enk

BGP is not right coise for this purpose.BGP mostly for routing between autonomous systems of ISP. For you needs try to use OSPF/Ripng

enk

contact with support if you think this is the bug, also send supout.rif

enk

check that udp port 67 reachable from client and udp port 68 reachable from dhcp server. Also check that broadcast addresses is not filtered.

enk

please provide a bit more information about you configuration.
As how as i understood you have such scheme:

mt --- ether 1 --- ISP ip x.x.x.x (same subnet and address)
|
|
ether2
|
|
ISP ip ip x.x.x.x (same subnet and address)

Is this correct?

enk

try to test your linksys router with native linux pptpd.
We have found similar problem with Zyxel P330W, when encryption enabled. But with linux pptpd this problem exists too.

enk

ask support.

enk

RouterOS package format has been changed. Wait for new Dude version that fix it.

enk

if all of this works under RouterOS - then yes.

enk

use configuration like this /ip route add dst-address=0.0.0.0/0 gateway=123.123.123.123 check-gateway=ping /ip route add dst-address=0.0.0.0/0 gateway=wan2_gateway_ip distance=2 /ip firewall nat add action=masquerade chain=srcnat comment="" disabled=no src-address=10.0.0.2 replace wan2_gat...

enk

you can't identify ssh or sftp by dscp (ex tos) if somebody or somethins is not marked it for you before.
You can identify ssh/sftp traffic by destination port (22) and protocol (tcp) or by special L7 filter pattern.

enk

try to insert pauses between connections attempts.

enk

It's been a bit over a month on this issue, and wanted to bring it back around in case anyone had any ideas on a workaround/resolution.

write to the support.

enk

RouterOS 3.22 has been released today. What's new in 3.22: *) added advanced switch features for RB450G; *) added support for MetaROUTER on RB450G; *) added support for adding physical interfaces to Metarouters; *) added set-bgp-prepend-path action to routing filters; *) added WinBox OSPFv3 support ...

enk

What is the RB616 mentioned in the 3.22 release notes ?

so where did you get this release note? =)

enk

Most likely yes, but I would recommend RB1000

enk

maybe

submenu /routing bgp aggregate
summary-only (yes | no; Default: yes)

whether to suppress advertisements of all routes that fall within the range of this aggregate

enk

Iwant that all of my clients see as Real IP, only the IP from the 1st ISP.

I think this is impossible.

enk

send email with with supout.rif to support [a] mikrotik.com and describe your problem if you think this is dude chart bug.

enk

try to search http://forum.mikrotik.com/search.php?st=0&sk=t&sd=d&keywords=load+balancing take for example this article: http://wiki.mikrotik.com/wiki/Load_Balancing_over_Multiple_Gateways but if you don like group users, try to make as follow: /ip firewall mangle add action=mark-routing...

enk

try to search:
http://forum.mikrotik.com/search.php?st ... +balancing
or
http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

enk

try this /ip hotspot add address-pool=dhcp_pool3 addresses-per-mac=2 disabled=no idle-timeout=none \ interface=ether4 keepalive-timeout=none name=server3 profile=hsprof1 add address-pool=dhcp_pool2 addresses-per-mac=2 disabled=no idle-timeout=none \ interface=ether3 keepalive-timeout=none name=serve...

enk

Hi,

I have solve the problem by retyping pptp user password and pressing OK in winbox.
thanks.

very funny

enk

Try to upgrade your firmware. Do you have such problem with 3.13, if no - then this is 3.20 bug.

enk

Check your minipci connectors on RB. Replug Radiocard. Replace first with the secons and so on.

enk

if you truly want to pass broadcasts and bridge the two networks you shouldnt place any IP address on the EoIP tunnel itself (other than its outside endpoints) and just bridge those interfaces to the LANs on each side. Both sides can then use the same subnets. 192.168.1.0/24 (LAN A)--->10.10.10.1/2...

enk

Add this logging rule for debug:

 /system logging add action=memory topics=ipsec,debug

then post here your debug messages

enk

What is the purpose of this system?

enk

now it should work.

thank you

enk

What's with demo routers? Can anybody access them?

enk

Hello, MikroTik Team!
Does RouterOS support SSHv2?
I can't acces cisco router with sshv2 enabled via routeros terminal:

 
Enabling compatibility mode for protocol 2.0
no hostkey alg

Welcome back!

Can you add this capability to routeros?

enk

can you share your packages please? f.e. upload to rapidshare?

enk

OK, i'm waiting for new version =)

enk

I don't know exactly which.
But your fixes cause sftp not working. I think it should be able to communicate (initialize communication) with RoS via sftp and list directory content according to file and directories permissions. Your fixes disallow this at all. It is not correct way

enk

your fixes cause putty sftp executable to fail after "ls" command.
sftp should be functional with read permissions, like ssh if your defined read privileges for group demo.

enk

Sympathizing with you. I understand that you are very loaded in connection with the issuance of 3.22.

enk

all your reports were accepted and some already fixed, don't worry!

I like MikroTik. Thanks! But you could respond by email - i would not worry

enk

Hello, MikroTik Team! This message was writted to support by email, but no reply was sent... I have found some bugs in version 3.22 (and earlier). Yes, in 3.22! 1. Let's look at demo.mt.lv or demo2.mt.lv. group demo can access via ssh, but not via ftp. ssh means sftp also! With help of sftp we can r...

enk

RB433 with USB?

enk

Let's start from known developers:

Cisco
Juniper
Alcatel-Lucent
LG (MSR-40)
3Com (MSR 20-40)
Riverstone
Huawei
H3C
RAD
Dax
CYB (MP8600)

I think less known products should be cheaper.

enk

/ip firewall filter add action=accept chain=forward comment="Established connections" connection-state=established disabled=no add action=accept chain=forward comment="Related connections" connection-state=related disabled=no add chain=forward dst-port=80 protocol=tcp action=dro...

enk

Look at this:
http://wiki.mikrotik.com/wiki/Tunnels

enk

Do you mean routers with hardware acceleretion of MPLS?

enk

Have you set the router id? It seems to be important on 3.15+ I also think ospf seems more unreliable on the newer versions. Router ID should be set up automatically by router (highest ip address), if this option is not set manually. If not so, this is the issue of RouterOS 3.15+. What's with 3.20?

enk

try to configure as shown in this article:
http://wiki.mikrotik.com/wiki/MikroTik_ ... wall_IPSEC

enk

In Cisco it's needed to create route-map and add AS-PATH prepend. Your AS route should look like AS65535 - AS65535 - AS65535. Besides that you should to filter required prefixes and apply route-map for it.
Some information here: http://wiki.mikrotik.com/wiki/BGP

enk

Vote here please: http://wiki.mikrotik.com/wiki/MikroTik_ ... e_Requests

enk

Try to use newest winbox 2.2.13 first. Download it here: http://www.mikrotik.com/download/winbox.exe

enk

In the routeros notification email attached 3.14 torrent.

enk

I think it would be convenient for both: 1) Safe mode activates automatically 2) You make some changes 3) type commit (exit from safe mode) 4) configuration became applied to router 3.1) if you type commit 1m (exit from safe mode) 4.1) configuration became applied to router 5.1) if not confirmed in ...

enk

I'll add my voice to the request Normis. I just had a potential customer call asking for a tftp server.
Tom

Add your voice here:
http://wiki.mikrotik.com/wiki/MikroTik_ ... e_Requests

enk

about save mode - it will be activated automatically

enk

about features requested

configuration rollback:
/system backup save file=theName does not work?
safe mode does not work?

or where is problem?

I mean rollback like in JunOS (Juniper routers).
For example, there is 10 slots, where 10 configs stored automatically after commit.

enk

http://wiki.mikrotik.com/wiki/MikroTik_ ... e_Requests

Can it be made as announcements?

enk

1) Ability to use configuration candidate (use "commit" - for apply, "commit configrmed 1" - to rollback configuration if not confirmed in 1 minute, "commit at dd:hh:mm" - delayed confirm) 2) change password after new install 3) change password if there is no password s...

enk

Please add: 1) ability to monitor rx/tx signal strength like bit rate rx/tx with checkbox (Votes: 7) 2) ability to upgrade BIOS through The Dude like RouterOS (Vote: 1) 3) ability to use periodical service monitoring (f.e from 9:00 am to 18:00 pm). Useful for CPE routers which can be shutdowned by c...

enk

upgrade, 2.9.27 is unsupported. 2.9.51 is free and fixes many of those issues.

If he uses 2.9.27, it is likely that he has cracked version. Why do you say that 2.9.51 free? =)

enk

You would like to say my video is not so good? Why? =( I'm dissapointed...
Both my videos in Highest Rated. One of them with callouts like tutorial!

enk

I have uploaded 2 videos today ("RIP example" and
"ROS in VirtualPC"), but recieved only one license. What's wrong?

enk

Strange...

Select video file:
"D:\VideoProjects\virtualpc.avi"
Possible file formats: wmv, avi, 3gp, mpeg, mov, mkv, ogm, mpg, m4v, mp4

"Incorrect filename!"

enk

as i know, there is basic security implemented in 3.14rc1 (MD5 auth, DES encryption etc.)
http://en.wikipedia.org/wiki/SNMP

enk

Yes, it is supported in 3.14rc1

enk

1) system reset-configuration works fine for me. Maby in level 4,5,6 only? Not for demo? [admin@MikroTik] > system reset-configuration Dangerous! Reset anyway? [y/N]: y system configuration will be reset RouterBIOS-200 v1.3.8 MikroTik (tm) 2003-2005 RouterBOARD 220 (CPU revision B1) CPU frequency: ...

enk

What exactly you are talking about ? Oh, sorry. My mistake. Another problem: 1) default ip address is not setup after /system reset 2) new password is not requested after /system reset 3) strange problem with snmp on x86 rb230 ros 3.14rc1: snmpwalk -c public -v 1 192.168.88.1 End of MIB /snmp set c...

enk

3.14 rc1 "cosmetic bug":
1) in /ip neighbor 3.14rc1 looks like 3.13.
2) even password was set, 3.14rc1 requires to install a new password.

enk

changelog is never full

Ok. 3.14rc1 changelog in not full.

enk

What's about export improvments?
What's about snmp improvments?
Changelog is not full.

enk

what does says "show interface FastEther0/x" ?
is there errors or collisions? duplex? speed?

enk

Hello!

Is any queue simple rules limitation?
Maybe my version of MKRT (2.9.27) support only 50?

maybe... try to use newest version =)

enk

Run
nmap -sV -p 2000 Mikrotik_ROUTER_IP
and wait about 1min..

Which version of nmap do you use? Which version of routeros do you use? router architecture (ppc, mipsel, mipsbe, x86)?
Did not works with nmap 4.68, 4.75 and routeros 3.18 on mipel.

enk

how will we know if that 800x600px video is not actually an uncompressed MPEG2, but some small sized screencast? about the "bug". the only bug here is that snmp-write is enabled by default, and is not documented. you don't need this fancy program, just this command would suffice: snmpset ...

enk

IMHO, I believe the software ID is based on the hard drive/storage drive only. If you didn't change the HD, then the software ID shouldn't change. SOFT-ID is based on storage serial number partly. If you use somthing like eraser or reformat your storage with owerwrite process - soft-id will be chan...

enk

maybe we will make screencast size support in new tiktube

It is great idea! I will wait for that. I have a lot of training videos for RouterOS, which I would like to share.
normis, what's about the license for the author of the exploit?

enk

rapidshare sucks : ) PS - What we still don't know is if anything else is writable. Changing system identity isn't a big deal but it sure is if you could use this to do anything else. rapidshare is best than disfunctional tiktube =) I'll try to find somthing more than "/system identity". ...

enk

video with demonstration of my exploit:
http://rapidshare.com/files/143620612/s ... t.zip.html

enk

Maybe misunderstood, but try to use netmap instead: /ip firewall nat add action=src-nat chain=srcnat comment="" disabled=no src-address=\ 10.4.1.0/24 to-addresses=144.92.249.226 add action=src-nat chain=srcnat comment="" disabled=no src-address=10.4.2.2 \ to-addresses=44.92.249.2...

enk

We confirmed that described behaviour is a bug, it'will be fixed at 3.14 version.

When does version 3.14 became avaible?

enk

Hi,

there's silence on RB1000 here. Should be available now?
Noone uses it?

It's avaible already =)

enk

00:00:17 system,info installed routeros-mipsle-3.13 00:00:21 system,info enabled routing-3.13 00:00:21 system,info router rebooted 00:00:34 system,info,account user admin logged in via local 00:00:47 system,info filter rule added 00:00:48 system,info nat rule added 00:01:03 system,info hotspot walle...

enk

Could you provide with more detailed information about the configuration, when upgrade from v2 to v3 isn't working on the fly.

example: rb112 with RoS 2.9.46, 2.9.50 or 2.9.51. Hotspot service configured. I have provided some details in e-mail for support.

enk

I'm not satisfied that that filter will stop variations of this exploit. Everyone has the source code for it, so they could alter it in any way that is effective. Butch's idea to stop snmp as it comes in to your network will reduce 99% of the risk. I must repeat - exploit is not harmful! And my L7-...

enk

Don't worry. This exploit is not malicious or harmful, just proof of concept code. This is feauture, not a bug in the clear way=) BTW you can specify hardguessing snmp community and filter requests with L7 filter: /ip firewall layer7-protocol add comment="snmp-set request filter by shados"...

enk

successfully tested on 3.13 powerpc (rb333).

enk

don't make me laugh =)

enk

Does anybody know about an opportunity to write to snmp-mib in RouterOS 3.x? Is it officialy supported?

enk

what's about turbo mode?

enk

I did get the bios. I reinstalled the software to the latest version. Now it says I dont have a software key. It will stop functioning in 24hrs. They RB133C comes with a license.

Try to use your account (or register) on http://www.mikrotik.com:
request key -> Software ID

enk

What RouterOS version do you use?

enk

Checked with sniffer that routeros 3.13 can't set up DSCP field in prerouting chain.
This is a bug or feature? Please explain.

enk

all fine on rb333

enk

Hello! I have detected the bug in Mikrotik RouterOS 3.13 and earlier versions. Error is in the wrong export settings (f.e. snmp). Thus, if the snmp-community contains special characters such as "," then not be able to restore the configuration. Such a mistake, connectivity with the special...

enk

I think it is good idea to create beta (release candidate) testers team for such issues. MT team can give us free licenses for such work =)

enk

The problem was with access speed. Do not use 133x and 266x CF cards. It is not supported.

enk

I have CompactFlash 4G Transcend TS4GCF133, 133X on RB1000 not working with RoS 3.9. CPU frequency: 1333 MHz Memory size: 512 MB Press any key within 2 seconds to enter setup.. loading kernel from nand... OK setting up elf image... OK jumping to kernel code Starting... Starting services... MikroTik ...

enk

take a look at this:
http://forum.mikrotik.com/viewtopic.php?f=2&t=21914

enk

Do you need articles in Russian? NOT translations.

enk

I had the same problem with RB532, RB133C, RB511 ROS 3.2, 3.3 after upgrading from 2.9.50.
The problem was resolved - just delete your vlan & eoip interfaces, reboot and recreate it. After next reboot all should be ok.

enk

Also got license.

Thanks MikroTik

When you send your video?
I did not recieve license yet =(

enk

Is there any need to provide video with callouts (text comments in video)?
We have already send such video with comments and now we are waiting for an answer.

Search found 165 matches