0 views on my post so far
posting this comment in hopes of increased reach

I am setting up a traffic analysis system for my network and have configured Traffic Flow (IPFIX) forwarding for interface ether2 (my WAN interface) of my RB5009 router. When I analyze the flow records, the field netflow.network.direction shows the value 'unknown'. Any idea why that is the case? Any...

Exactly. I am going crazy looking for clear steps to do that. I hope someone here is able to help me out I contacted support & I am pleasantly surprised with their promptness & help. They said it should work, just to make sure to execute this command (similar to above link) to get 2.5G link...

Exactly. I am going crazy looking for clear steps to do that. I hope someone here is able to help me out

I'd like to ask the same question quoted here. I have one L009 and would like to connect it to my RB5009 over SFP. I earlier got the S+ RJ10 but they seemed to be incompatible with the L009 so I replaced them with a pair of S+85DLC03D. This as per the compatibility chart on Mikrotik docs should supp...

[admin@L009] /container> shell 0 / # iperf3 -s iperf3: error - unable to start listener for connections: Address in use iperf3: exiting / # iperf3 -c 192.168.1.10 iperf3: error - unable to connect to server: Network unreachable I have this issue when trying to run commands on the iperf container Wha...

Any idea why PoE auto was removed for L009?

I just checked the release notes for 7.12 and looks like it's intentional. One of the items say that support for poe auto mode is removed for L009 devices.
I just don't understand why?

I upgraded my L009 today to 7.12 and the PoE port just stopped giving out power. After checking, the PoE out was set to off and whenm trying to set it to PoE auto, it throws an error saying Couldn't change interface <ether8>. This model does not support poe-out auto-on mode(6) winbox error.png Has a...

I have one L009 and R5009 is on the way. I would like these to talk over the SFP ports. The L009 has a 2.5G SFP and the R5009 has a 10G SFP+ port. I am not sure which SFP modules/transceivers to use here. I would like to use the full 2.5G potential of the L009 SFP here. Please provide your suggestio...

So even if you reset to factory default, there is no 5GHz channel being sent out (Mikrotik-vwxyz) ? I did another reset and it did kinda work this time so if I set the frequency on 5g to any or all bands between 5170-5250 the SSID comes up. If I include any frequency after this e.g. 5300 the SSID d...

True about 5180 being minimum. One thing which is also missing in your minimal config: country settings. I've tried that as well, but it didn't work Basically every combination of Channel width, frequency, country, security. None of them helped And even if all the above mentioned settings are left ...

Another thing worth mentioning is, I wanted to check if the radios in the device are good, so I did a scan using the 5GHz radio
Within 5 seconds all the 5 GHz networks around me showed up in the scan window (networks on multiple frequencies within 5GHz)

Set frequency manually so you KNOW which frequency you should see.
Start with the lowest one (5160).

I tried that too
FYI, 5160 is unsupported. cap ax supports 5180 to 5885

I have a new cAP ax and tried to set it up with a 5GHz and a 2.4 GHz network. the 2.4 seems to work fine but the 5 GHz SSID never shows up on any of the devices. I initially tried setting it up as a cAP where my L009 was the cAPsMAN but when it didnt work, I did a reset of the cAP and set it up from...

Anything new here?
Did my last detailed post help with any ideas?

here is the config file
like the last time, I have redacted the personal info and replaced it with #############

Any ideas from someone after my last post?

I know the config is a bit messy I'll try to put here just the snippets of the config relevant to this topic. First things first, I did take your advice and change the distance of BSNL from 2 to 10, and the LTE connection to 20 to give a more clear idea on the preference of each route. This is the c...

Attaching my config here I have redacted some of the personal information with ##### in the file, like usernames, local IP address leases (LAN), etc Also adding some context about the WAN interfaces, there are a total of 3 (you can ignore the 3rd one which is LTE) Primary internet interface - Excite...

I tried this but it did not work, and I think I know why. I did run a packet capture to have a better understanding of this. When a connection is initiated from the internet (SYN), coming into my network via ISP B (backup route for my netowrk), it is correctly routed to the internal host based on th...

Can someone help create mangle rules/PBR for return traffic to internet? I have ISP A-primary(behind a NAT of another router) and ISP B- backup(PPPoE connection from my router). I can only use ISP B to reach my home network from the outside(IPSec tunnel, Port forwarding to internal network devices, ...

Thanks, guys!
I was able to make it work.

Later realized this was already answered in viewtopic.php?p=962282&hilit=force+cloud+to+use#p962282

I have a Mikrotik router that has 3 Internet connections. 1) PPPoE connection - Public IP address gets assigned to the PPPoE interface of the router 2)Fiber connection where ISPs PON does not allow a public IP address to be assigned. (Behind a double NAT) 3)USB LTE (Behind a double NAT) Only the con...

Hello dave12 I'm trying to setup almost exactly what you have mentioned here. WAN1 is a PPPoE connection (Public IP- Dynamic) that works over ethernet and WAN2 is an android USB hotspot (Private IP - NAT ) My preferred WAN is WAN1 and I want to failover when the PPPoE interface is down and also in s...

Hello! I'm using LHG5 as the CPE with my local WISP. The connection seems to work fine during the day but after around sunset till midnight (Peak time I'm guessing), the connection becomes very unstable. Ideally I get a ping time of ~20ms to google DNS but during such fluctuations, it goes upto 700m...