Community discussions

MikroTik App

Search found 24 matches

by akeeltaj
Tue May 14, 2024 7:48 pm
Forum: RouterBOARD hardware
Topic: SFP transceivers to connect L009 & RB5009
Replies: 21
Views: 7471

Re: SFP transceivers to connect L009 & RB5009

Exactly. I am going crazy looking for clear steps to do that. I hope someone here is able to help me out I contacted support & I am pleasantly surprised with their promptness & help. They said it should work, just to make sure to execute this command (similar to above link) to get 2.5G link...
by akeeltaj
Sat Dec 09, 2023 10:13 am
Forum: RouterBOARD hardware
Topic: SFP transceivers to connect L009 & RB5009
Replies: 21
Views: 7471

Re: SFP transceivers to connect L009 & RB5009

Exactly. I am going crazy looking for clear steps to do that. I hope someone here is able to help me out
by akeeltaj
Fri Dec 08, 2023 5:55 pm
Forum: RouterBOARD hardware
Topic: SFP transceivers to connect L009 & RB5009
Replies: 21
Views: 7471

Re: SFP adapters to connect L009 & RB5009

I'd like to ask the same question quoted here. I have one L009 and would like to connect it to my RB5009 over SFP. I earlier got the S+ RJ10 but they seemed to be incompatible with the L009 so I replaced them with a pair of S+85DLC03D. This as per the compatibility chart on Mikrotik docs should supp...
by akeeltaj
Sat Nov 18, 2023 8:53 am
Forum: RouterOS beta
Topic: IPERF3 server on RouterOS ARM
Replies: 8
Views: 16748

Re: IPERF3 server on RouterOS ARM

[admin@L009] /container> shell 0 / # iperf3 -s iperf3: error - unable to start listener for connections: Address in use iperf3: exiting / # iperf3 -c 192.168.1.10 iperf3: error - unable to connect to server: Network unreachable I have this issue when trying to run commands on the iperf container Wha...
by akeeltaj
Fri Nov 17, 2023 8:45 pm
Forum: Announcements
Topic: v7.12.1 [stable] is released!
Replies: 252
Views: 106604

Re: v7.12 [stable] is released!

Any idea why PoE auto was removed for L009?
by akeeltaj
Fri Nov 17, 2023 8:42 pm
Forum: General
Topic: PoE Auto on issues on L009
Replies: 3
Views: 2105

Re: PoE Auto on issues on L009

I just checked the release notes for 7.12 and looks like it's intentional. One of the items say that support for poe auto mode is removed for L009 devices.
I just don't understand why?
by akeeltaj
Fri Nov 17, 2023 7:00 pm
Forum: General
Topic: PoE Auto on issues on L009
Replies: 3
Views: 2105

PoE Auto on issues on L009

I upgraded my L009 today to 7.12 and the PoE port just stopped giving out power. After checking, the PoE out was set to off and whenm trying to set it to PoE auto, it throws an error saying Couldn't change interface <ether8>. This model does not support poe-out auto-on mode(6) winbox error.png Has a...
by akeeltaj
Tue Nov 14, 2023 9:32 pm
Forum: RouterBOARD hardware
Topic: Help with SFP needed
Replies: 0
Views: 2910

Help with SFP needed

I have one L009 and R5009 is on the way. I would like these to talk over the SFP ports. The L009 has a 2.5G SFP and the R5009 has a 10G SFP+ port. I am not sure which SFP modules/transceivers to use here. I would like to use the full 2.5G potential of the L009 SFP here. Please provide your suggestio...
by akeeltaj
Tue Oct 17, 2023 9:58 pm
Forum: Wireless Networking
Topic: cAP ax 5 GHz not working
Replies: 15
Views: 4656

Re: cAP ax 5 GHz not working

So even if you reset to factory default, there is no 5GHz channel being sent out (Mikrotik-vwxyz) ? I did another reset and it did kinda work this time so if I set the frequency on 5g to any or all bands between 5170-5250 the SSID comes up. If I include any frequency after this e.g. 5300 the SSID d...
by akeeltaj
Tue Oct 17, 2023 10:36 am
Forum: Wireless Networking
Topic: cAP ax 5 GHz not working
Replies: 15
Views: 4656

Re: cAP ax 5 GHz not working

True about 5180 being minimum. One thing which is also missing in your minimal config: country settings. I've tried that as well, but it didn't work Basically every combination of Channel width, frequency, country, security. None of them helped And even if all the above mentioned settings are left ...
by akeeltaj
Tue Oct 17, 2023 9:13 am
Forum: Wireless Networking
Topic: cAP ax 5 GHz not working
Replies: 15
Views: 4656

Re: cAP ax 5 GHz not working

Another thing worth mentioning is, I wanted to check if the radios in the device are good, so I did a scan using the 5GHz radio
Within 5 seconds all the 5 GHz networks around me showed up in the scan window (networks on multiple frequencies within 5GHz)
by akeeltaj
Tue Oct 17, 2023 9:12 am
Forum: Wireless Networking
Topic: cAP ax 5 GHz not working
Replies: 15
Views: 4656

Re: cAP ax 5 GHz not working

Set frequency manually so you KNOW which frequency you should see.
Start with the lowest one (5160).
I tried that too
FYI, 5160 is unsupported. cap ax supports 5180 to 5885
by akeeltaj
Tue Oct 17, 2023 9:02 am
Forum: Wireless Networking
Topic: cAP ax 5 GHz not working
Replies: 15
Views: 4656

cAP ax 5 GHz not working

I have a new cAP ax and tried to set it up with a 5GHz and a 2.4 GHz network. the 2.4 seems to work fine but the 5 GHz SSID never shows up on any of the devices. I initially tried setting it up as a cAP where my L009 was the cAPsMAN but when it didnt work, I did a reset of the cAP and set it up from...
by akeeltaj
Sat Jan 07, 2023 9:06 am
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Re: Policy based routing for return traffic back to the internet.

Anything new here?
Did my last detailed post help with any ideas?
by akeeltaj
Thu Dec 29, 2022 8:21 pm
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Re: Policy based routing for return traffic back to the internet.

here is the config file
like the last time, I have redacted the personal info and replaced it with #############
by akeeltaj
Wed Dec 28, 2022 11:26 pm
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Re: Policy based routing for return traffic back to the internet.

Any ideas from someone after my last post?
by akeeltaj
Mon Dec 26, 2022 11:15 pm
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Re: Policy based routing for return traffic back to the internet.

I know the config is a bit messy I'll try to put here just the snippets of the config relevant to this topic. First things first, I did take your advice and change the distance of BSNL from 2 to 10, and the LTE connection to 20 to give a more clear idea on the preference of each route. This is the c...
by akeeltaj
Sun Dec 25, 2022 8:43 pm
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Re: Policy based routing for return traffic back to the internet.

Attaching my config here I have redacted some of the personal information with ##### in the file, like usernames, local IP address leases (LAN), etc Also adding some context about the WAN interfaces, there are a total of 3 (you can ignore the 3rd one which is LTE) Primary internet interface - Excite...
by akeeltaj
Sat Dec 24, 2022 7:11 pm
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Re: Policy based routing for return traffic back to the internet.

I tried this but it did not work, and I think I know why. I did run a packet capture to have a better understanding of this. When a connection is initiated from the internet (SYN), coming into my network via ISP B (backup route for my netowrk), it is correctly routed to the internal host based on th...
by akeeltaj
Fri Dec 23, 2022 10:14 pm
Forum: Forwarding Protocols
Topic: Policy based routing for return traffic back to the internet.
Replies: 12
Views: 4677

Policy based routing for return traffic back to the internet.

Can someone help create mangle rules/PBR for return traffic to internet? I have ISP A-primary(behind a NAT of another router) and ISP B- backup(PPPoE connection from my router). I can only use ISP B to reach my home network from the outside(IPSec tunnel, Port forwarding to internal network devices, ...
by akeeltaj
Wed Dec 21, 2022 9:37 pm
Forum: Useful user articles
Topic: force Mikrotik Cloud DDNS to use a specific interface Topic is solved
Replies: 3
Views: 14888

force Mikrotik Cloud DDNS to use a specific interface Topic is solved

I have a Mikrotik router that has 3 Internet connections. 1) PPPoE connection - Public IP address gets assigned to the PPPoE interface of the router 2)Fiber connection where ISPs PON does not allow a public IP address to be assigned. (Behind a double NAT) 3)USB LTE (Behind a double NAT) Only the con...
by akeeltaj
Tue Jan 18, 2022 10:02 am
Forum: Beginner Basics
Topic: Seamless failover [SOLVED]
Replies: 20
Views: 10069

Re: Seamless failover [SOLVED]

Hello dave12 I'm trying to setup almost exactly what you have mentioned here. WAN1 is a PPPoE connection (Public IP- Dynamic) that works over ethernet and WAN2 is an android USB hotspot (Private IP - NAT ) My preferred WAN is WAN1 and I want to failover when the PPPoE interface is down and also in s...
by akeeltaj
Fri Oct 16, 2020 9:51 pm
Forum: Wireless Networking
Topic: Unstable connection between sunset and midnight.
Replies: 0
Views: 500

Unstable connection between sunset and midnight.

Hello! I'm using LHG5 as the CPE with my local WISP. The connection seems to work fine during the day but after around sunset till midnight (Peak time I'm guessing), the connection becomes very unstable. Ideally I get a ping time of ~20ms to google DNS but during such fluctuations, it goes upto 700m...