Community discussions

MikroTik App

Search found 8 matches

by Suhrab
Sat Nov 21, 2020 12:37 pm
Forum: General
Topic: Problems with MT [SOLVED]
Replies: 11
Views: 785

Re: Problems with MT [SOLVED]

I made /tool sniffer uploaded the file

https://my-files.su/z3r1vb
by Suhrab
Thu Nov 19, 2020 11:22 am
Forum: General
Topic: Problems with MT [SOLVED]
Replies: 11
Views: 785

Re: Problems with MT [SOLVED]

Check that the bridge MAC addresses are unique, different for each device.
Yes, the Mac addresses in the network are unique, I tried to reset and re-configure, it did not help
by Suhrab
Thu Nov 19, 2020 5:17 am
Forum: General
Topic: Problems with MT [SOLVED]
Replies: 11
Views: 785

Re: Problems with MT [SOLVED]

The Mikrot logs contain these messages

ether1: bridge port received packet with own address as source address (6c:3b:6b:a7:e0:86), probably loop

Although there is no loop
by Suhrab
Fri Oct 30, 2020 11:49 am
Forum: General
Topic: Problems with MT [SOLVED]
Replies: 11
Views: 785

Re: Problems with MT [SOLVED]

Have I understood it correctly that ping cannot get through the QinQ cloud but mac-telnet can, and that this is only a problem for VLAN 202 while other VLANs on the same path work OK? Yes, the ping does not pass through the qinq cloud, and only 202 VLANs, all other VLANs work without problems. 202 ...
by Suhrab
Fri Oct 30, 2020 5:32 am
Forum: General
Topic: Problems with MT [SOLVED]
Replies: 11
Views: 785

Re: Problems with MT [SOLVED]

You might want to explain which exact Mikrotik products you are using, and how they are configured. model = 921UAGS-5SHPacT with antennas mANT 19S /interface bridge add name=bridge1 /interface wireless set [ find default-name=wlan1 ] antenna-gain=1 band=5ghz-a/n/ac disabled=no \ frequency=5765 freq...
by Suhrab
Thu Oct 29, 2020 7:24 am
Forum: General
Topic: Problems with MT [SOLVED]
Replies: 11
Views: 785

Problems with MT [SOLVED]

https://lux.loli.net/2020/10/29/MT30425d88a41119d6.png Hi There is a network, drew Mikrotik with the IP address 192.168.2.33/24 from the office does not ping, but it goes through Mac-telnet, all other devices are pinged. Also, if you go to Mikrotik 192.168.2.33/24 from it, the ping goes to 192.168....
by Suhrab
Thu Oct 29, 2020 5:07 am
Forum: Forwarding Protocols
Topic: BGP default originate
Replies: 2
Views: 278

Re: BGP default originate

Add a route filter for that peer and only allow default to it, something like: /routing filter add action=accept chain=BGP-Out prefix=0.0.0.0/0 add action=discard chain=BGP-Out If I add /routing filter add action=accept chain=BGP-Out prefix=0.0.0.0/0 add action=drop chain=BGP-Out [/quote] And I do ...
by Suhrab
Wed Oct 28, 2020 12:43 pm
Forum: Forwarding Protocols
Topic: BGP default originate
Replies: 2
Views: 278

BGP default originate

Hi Setting up BGP on Mikrotik. There is one higher-level provider from which I get about 3000 routes. There is a provider that is connected to me, I have to give it Default view, ticked Default Originate = if installed, but for some reason all 3000 routes are transmitted, what am I doing wrong ? Imm...