MikroTik

pingus

Hi

Do not all devices give health informations? I don't have any health data nor a menu item on RB941-2nD.

Thanks
Pingus

pingus

I had to change the predefined server. I'm not sure if I had changed it but mine was wrong, Also this information from support was helpful: Gateway ID in winbox is Gateway EUI in TTS. Gateway ID in TTS is just a name, you can write anything there, but Gateway EUI should match the gateway-id field fr...

pingus

pingus

Hi Two switches given: CRS354-48G-4S+2Q+ CRS312-4C+8XG I first created a bonded interface on CRS354 but i didn't get it to work. Then I created a bonding interface on CRS312 the same way as on CRS354 and it worked with the same host connected. I don't see a difference in the configs (except some quo...

pingus

Ok, good to know! Many thanks.

pingus

Hi

Is it possible to configure vlan's on crs125 the new way as on the crs3xx series?

Regards,
Pinugs

pingus

Ok, got it. The npk file was in a subfolder ...

pingus

I have the same problem with rb600a: jan/02/1970 00:41:33 system,error,critical System rebooted because of kernel failure jan/02/1970 00:41:33 system,error,critical Out of memory condition was detected jan/02/1970 00:41:33 system,error,critical router was rebooted without proper shutdown And I am no...

pingus

Thanks a lot!

pingus

Hi

I installed ROS 6.28 on a RB532A and have permanent rebooting because of kernel failure, out of memory condition detected.

Where can I download ROS 6.27?

Regards,
Pingus

pingus

The chosen master-port matters when configuring IP addresses for management or routing, for switching it can be any of the used ports. I think sample configuration could look like this: This means, it has to be a used port? How about management VLAN and IP address. Where do I have to define the mas...

pingus

Great, I will implement this asap and add it to the CSR examples.

Many thanks!

pingus

Hi I would like to use my CSR125 with a Cisco Switch and an ESXi Host. I am able to configure Cisco Switches, HP Switches, Linksys Switches but I have big problems configuring this CSR125. As you can see below I would like to have an LACP Trunk with all VLAN's to the Cisco Switch, different Clients ...

pingus

I have the same problem, not more than about 100mbps throughput, 250mbps with RB600

Very disappointed about CRS125. They shouldn't use the R in CRS.

pingus

I went back to my Cisco L3 Switch .... Mikrotik should stop selling them!

pingus

+1, the same here, still in the box

pingus

I usually use Cisco, HP L3/L2 Switches and Fortigates. I had many hours to find out how to tag a port or how to get a LACP trunk between two devices. Most of what I tried didn't work. Maybe it's me not clever enough, maybe it's not yet implemented (couldn't believe that the first time I read it) and...

pingus

nobody?

pingus

Hi What's wrong with the following time based filter? It was running with ROS 5.* but not anymore with 6.* 38 I ;;; Block kid's PC's 22:00 - 23:59 chain=kid -> wan action=drop time=22h1s-23h59m59s,sun,mon,tue,wed,thu,fri,sat 39 I ;;; Block kid's PC's 00:00 - 05:59 chain=kid -> wan action=drop time=0...

pingus

Can somebody explain how the "Auto Upgrade Mirror" is working ?

pingus

Hi

How is it possible to get a rtsp stream to a computer behind a nated routeros?

I opened the following ports:

554 UDP/TCP
6970-6977 UDP
3544 UDP

There are no droped ports anymore in the log. I guess there is a problem with nat.

Thanks
Pinugs

pingus

Hi

How can/should I use the switch feature with the firewall? What sould I use as SRC interface or DST interface - the master interface or do I have to set rules for each switched interface? With bridged interfaces I could use the bridge interface.

Regards,
Pingus

pingus

I have the same problem when changing some IPsec settings they do not negotiate a new connection and also sometimes in normal business they do not negotiate a new connection. The only solution is to restart the routers. See also [Ticket#2008061266000311]

pingus

I can confirm this, same problem on RB532 v3.0

pingus

Yes, the same here. I have it configured as a simple AP and wireless is really unstable. I hope they can find a solution. Also for unstable OpenVPN.

Mikrotik, please take some more time to bring out the next version and try to solve ppp and wireless problems.

pingus

Hi

I enabled logging to email on RB532 with 3.0RC11. It works well but all information is in the subject and therefor not easy to read.

Can I do something to change this? Or can you change this in the next version?

pingus

I have problems with OpenVPN on RC11. The first client connection is ok. As soon as the second tries to connect I am not anymore able to browse the internet trough my pppoe connection on MT.

Has anybody else the same problem?
Has someone a solution?

pingus

Please vote here: http://wiki.mikrotik.com/wiki/MikroTik_ ... e_Requests

pingus

Hi

Is it possible to add a IP address manually to the firewall address list with a timeout? I want to add IP addresses blocked from a postfix server to be added but with a timeout.

Thanks
pingus

pingus

The problem is solved.

comp-lzo is the problem. After removing compression I am able to ping through the tunnel, finally

pingus

Hi all Setup: MT Router (3.0RC9) as OpenVPN server, Linux box as OpenVPN client I send a Ping to the OpenVPN Endpoint with IP 10.10.11.33 from the linux box. When I torch the VPN connection (displays registred in PPP) I get 37.10.10.11 as destination address and 80.10.10.11 as source address (should...

pingus

Sure, I will do this as soon as I fixed ping issues.

pingus

Finally I got OpenVPN working to the point where I have a registred connection. I also get an IP address. Now I have to find out how to ping across the two routers. Here are my linux client settings: dev tun0 proto tcp-client remote example.com 1194 ca root.pem cert client.cert key client.key tls-cl...

pingus

Should adding a default gateway be possible with 3.0RC9 and a Level 1 License? Is it in general not possible with Level 1 License?

pingus

As I could test with 2 RouterOS the firewall isn't a problem. Two RouterOS are connecting well.

Is it possible that OpenVPN Server on RouterOS is waiting for a username? Can I send a username from OpenVPN Client running on Linux?

pingus

How do I have to configure the firewall to get MT as OpenVPN server running?

pingus

Hi

Is http://www.mikrotik.com down? I was not able to connect yesterday at home and also not today in the office.

pingus

This is good for you but doesn't helps me :) Here is my linux config: dev tun0 proto tcp-client ifconfig 10.10.11.34 10.10.11.33 #because I don't receive an IP address remote mt.fqdn.tld 1194 ca /etc/ssl/certs/root.pem #CAcert root certificate cert client.cert key client.key tls-client tls-remote mt...

pingus

Did it one the other way around, MT as server and linux as client?

I can open a connection but I can not ping MT and the client doesn't receive an IP from the router.

pingus

Hi

Is the problem described here
http://forum.mikrotik.com/viewtopic.php ... 564#p83560
http://forum.mikrotik.com/viewtopic.php ... 564#p80366

with RB564 already solved? I could not find any information in the Changelog until 3.0RC3

Search found 40 matches