MikroTik

vaka

In firewall create address-list with hostnames (not addresses) of banks.
Create rule in firewall mangle prerouting dst address list=banks-list, set action mark routing and new routing mark to_WAN1

vaka

Create vlans on Mikrotik in bridge section, enable vlan filtering on bridge and attach ports (tagged, untagged) to this vlans. Add interface bridge as tagged to every vlan you created if you want to share vlan between ports are in bridge. Also If you attached untagged (access) port, go to bridge-por...

vaka

Hi, guys! I have iBgp between R1 and R2 routers (R1 - Mikrotik ROS7.6, R2 - Cisco IOS) R1 announces 4 networks /24. They are described in ip/firewall/address-lists in one list, for example named AS65001. 10.0.10.0/24. 10.0.20.0/24, 10.0.30.0/24, 10.0.40.0/24 announce to R2 works well. But! some subn...

vaka

*) bgp - added support for BGP advertisement displaying (CLI only);

Who knows how to display bgp session advertisement ?

vaka

oh my dear. `/export` hangs on RB941-2nD.

Try

/export verbose

vaka

still periodically added new default smb users and shares Git repo: /home/oxidized/.config/oxidized/devices.git Git commit ID: 5d0e552803905a28fc4abf390d8abaf32dcc4a43 diff --git a/x.x.x.x b/x.x.x.x index f5d732d..a92890c 100644 --- a/x.x.x.x +++ b/x.x.x.x @@ -104,10 +104,12 @@ set allow-guests=no a...

vaka

Look more more closely, /routing/bgp/session has "uptime" parameter. And regarding received prefix count, it will be added eventually, but if you really need to see how many prefixes are received then there is a workaround you can /routing/route/print count-only where received-from="...

vaka

Connection uptime is nowhere to be found... Look more more closely, /routing/bgp/session has "uptime" parameter. And regarding received prefix count, it will be added eventually, but if you really need to see how many prefixes are received then there is a workaround you can /routing/route...

vaka

SMB shares and users still self-created on ccr2004

vaka

again new smb default shares and users autocreated [ccr2004] > /ip smb/shares/print Flags: * - DEFAULT Columns: NAME, DIRECTORY, MAX-SESSIONS # NAME DIRECTORY MAX-SESSIONS ;;; default share 0 * pub /pub 10 ;;; default share 1 pub /pub 10 [ccr2004] > /ip smb/users/print Flags: * - DEFAULT Columns: NA...

vaka

I tried to upgrade from 6.48.1 to development channel 7.1rc4. I don't know firmware version, but it was probably lower than 6.48.1. Logs hint it is 6.47.7 Seems like I bricked my device (RB4011) ... Changed to older netinstall and image installed instantly. All good, device unbricked, and firmware ...

vaka

Another OVPN - Problem:
Upgraded a Chateau LTE12 from 7.1Beta5 to 7.1rc3.
Same with 7.1rc4 !

Under PPP/Interface OVPN - Server Button and PPPoE Scan Button disappeard in Winbox AND Webfig !

ccr2004 - 7.1rc4. all buttons in place

vaka

Can't create routing bgp connection via WEB-GUI. Remote AS field is always red (Invalid value in Remote AS)

vaka

dst-len in 24-24 can be simply written as dst-len == 24

Yes I know. But dst-len in 24-24 is the correct syntax and should do the same as dst-len==24

vaka

Because "in" work for check if an IP are inside one range, not for check if a number is inside an interval... [prfx prop readable] !=|==| in {address 46/} read carefully. dst-len is [num prop readable] not prfx. [num prop readable] in <---- in allowed {int..int}|{int-int} <----- interval ...

vaka

look at filter rule syntax. https://help.mikrotik.com/docs/pages/viewpage.action?pageId=74678285 Ah, interesting... Still my findings are different from what the documentation says. Tried such syntax (dst==a.b.c.d/22 && dst-len in 24-24) in my filters and broke bgp routing at all. Also lost...

vaka

anyone find where we can check advertisement route ?

Nowhere for now. Waiting if it appeared in next releases.

vaka

something like this /routing/filter/rule/add chain=bgp_out rule="if(dst==10.10.0.0/16 && dst-len in 16-24) {accept}" I think you can not use "in" with "dst-len"... Even ">=" and "<=" do not work. At least the latter would be nice, makes it m...

vaka

hi guys, sorry maybe it's noob question but how to create filter rule on v7, like from v6 ? i've been looking on wiki, but could find prefix-length, or just use dst-len ? Flags: X - disabled 0 chain=bgp-out prefix=10.10.0.0/16 prefix-length=16-24 action=accept something like this /routing/filter/ru...

vaka

Try disable enable your filter rule, it works for me I removed whole bgp-related config and paste it again. And it works now. A kind of mystery... You need to set "output.network=AS65172" for your bgp Connection instance. That's where you tell it to advertise the prefixes in the address l...

vaka

I had the same problem. What seems to have fixed it for me was disabling all BGP address-lists and re-enabling them. Thanks for the tip it worked. and how and where do you describe BGP address-lists? I have described the address list in the firewall /ip firewall address-list add address=172.16.10.0...

vaka

SMB support should be removed from RouterOS! This kind of thing does not belong in a router and is not required anymore.

And what about ftp, tftp?
If you have device with external usb drive, SMB also can be used as remote storage protocol for PXE purposes.

vaka

On my ccr2004 7.1rc2 config-diff catched a funny bug. Growth SMB shares and guest users. 2021-09-03 22:27 /ip smb shares add comment="default share" directory=/pub name=pub +add comment="default share" directory=/pub name=pub /ip smb users add name=guest +add name=guest 2021-09-0...

vaka

Devices that support this feature:

CCR2004
...

can not install zerotier-7.1rc2: it is not made for arm64, but for arm

vaka

Where did you find "Route Filter" dialog?
I have no such selection in my winbox 3.29
Strange... for me it appears in the menu.

It appears if I connected to ros6.xx device but not on ros7.1rc1

vaka

what is the syntax to use BGP AS-PATH in the ROSv7 filter ?

Captura de Tela 2021-08-24 às 16.40.37.png

Where did you find "Route Filter" dialog?
I have no such selection in my winbox 3.29

vaka

Reporting that on multiple CCR2004 with zero configuration that the system is barely responsive.

catched the same problem on my ccr2004 with 7beta3. 7beta2 worked more stable

Search found 27 matches

Re: One Web Site 2 ISP

Re: Mikrotik Router & Cisco Switch VLAN Configuration [SOLVED]

BGP Filters. Do not understand it strange behaviour

Re: v7.6rc is released!

Re: v7.1 is released!

Re: v7.1 is released!

Re: v7.1 [testing] is released!

Re: v7.1 [testing] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc4 [development] is released!

Re: v7.1rc2 [development] is released!

Re: v7.1rc2 [development] is released!

Re: ZeroTier added to RouterOS v7.1rc2

Re: v7.1rc1 [development] is released!

Re: v7.1rc1 [development] is released!

Re: v7.1beta3 [development] is released!