Community discussions

MikroTik App

Search found 300 matches

by wireless12
Sat Jan 21, 2023 4:01 pm
Forum: Wireless Networking
Topic: Netpower 16P adapter
Replies: 3
Views: 616

Re: Netpower 16P adapter

Thanks for Reply @ biomesh sir, i only have 24 v operated devices on tower, i have no device which require 48 v. my query is that if i use mikrotik adapter: model ( (24HPOW), will that power and run all 18 devices which are connected to all 16 PoE ports of netpower 16 p ( only have 24 v devices). i ...
by wireless12
Fri Jan 20, 2023 11:32 am
Forum: Wireless Networking
Topic: Netpower 16P adapter
Replies: 3
Views: 616

Netpower 16P adapter

Dear Friends.. I had just purchase Netpower 16 P, i want to power Mimosa C5C and C5X , Power beam 400 ,power beam Ac, rocket Ac lite and also airfiber 5xHD, now i m confused which power adopter i should use to power up net power so that i could easily powered all the devices i mentioned above on the...
by wireless12
Wed Feb 02, 2022 8:52 pm
Forum: RouterBOARD hardware
Topic: CCR 2116-12g-4s+ powerhouse
Replies: 6
Views: 2802

CCR 2116-12g-4s+ powerhouse

Does anyone have real world performance tested for new ccr 2116-12g-4s +. Does CCR is really double powerful by any model of CCR of CCR1036 ? As claimed by mikrotik. As far it's look to me that if CCR 2116-12g-4s + is really double powerful then CCR 1036 then it is nearly equal to CCR 1072. Kindly s...
by wireless12
Thu Dec 10, 2020 10:57 am
Forum: Wireless Networking
Topic: mikrotik Poe switch
Replies: 4
Views: 1578

Re: mikrotik Poe switch

Thanks for reply. can [CRS328-24P-4S+RM] be used for both Airmax devices and airfiber devices.? Because many Poe switch of ubiquity could only power Airmax devices but not Airfiber devices. only Edgepoint S16 of ubiquity could power both Airmax and Airfiber Devices. i have came across to mikrotik Ne...
by wireless12
Wed Dec 09, 2020 8:35 pm
Forum: Wireless Networking
Topic: mikrotik Poe switch
Replies: 4
Views: 1578

mikrotik Poe switch

Dear Friends,
which mikrotik poe switch is best to power both ubiquity airmax devices and ubiquity airfiber 5x,5xhd and 5u devices.

kind Regards.
by wireless12
Sat Jan 14, 2017 7:09 pm
Forum: General
Topic: torch hotspot user
Replies: 2
Views: 710

Re: torch hotspot user

kindly reply.
by wireless12
Fri Jan 13, 2017 10:56 am
Forum: General
Topic: torch hotspot user
Replies: 2
Views: 710

Re: torch hotspot user

any answer
by wireless12
Thu Jan 12, 2017 7:42 pm
Forum: General
Topic: torch hotspot user
Replies: 2
Views: 710

torch hotspot user

friends, i run an wisp, i use mikrotik ccr router as NAS i use radius server. when i log into my mikrotik router and then open PPPOE sessions i could able to torch of any pppoe session. (Pic attached) but i cannot torch a hotspot user session. ( pic attached) how could i torch a hotspot user in mikr...
by wireless12
Fri Sep 16, 2016 10:16 am
Forum: Wireless Networking
Topic: Request time out and only few operating frequencies
Replies: 3
Views: 1032

Request time out and only few operating frequencies

Dear Frds, i have got a PTP wireless link having RB Metal 5SHPn at both end with 27 dbi grid antenna. issue: 1) only frequencies in dark bold font ( Pic attached of Access point ) are workable, if i select any other frequency other then the bold font the link do not work, how ever i have selected su...
by wireless12
Sun Mar 20, 2016 2:25 pm
Forum: General
Topic: hotspot and PPPOE
Replies: 1
Views: 679

hotspot and PPPOE

Hello everyone. I want to shifted my entire broadband users on Radius (listed in Made for mikrotik) and Mikrotik 1036 router NAS. I have got few public IP pools: (A) 103.239.xxx.129/27 | (B) 103.239.xxx.161/27 | all these four pools for giving static public to business customers. (C) 103.239.xxx.193...
by wireless12
Fri Feb 26, 2016 12:37 pm
Forum: General
Topic: Radius and Mikrotik NAS latency
Replies: 2
Views: 908

Re: Radius and Mikrotik NAS latency

its one STM ILL and only arround 90 Mbps at peak.

Regards
by wireless12
Fri Feb 26, 2016 5:30 am
Forum: General
Topic: Radius and Mikrotik NAS latency
Replies: 2
Views: 908

Radius and Mikrotik NAS latency

Dear friends, i have set a new management solution for my existing customers. i have installed Jaze ISP Manager ( listed in MADE for Mikrotik site) as Radius and Mikrotik CCR 1036 EM as NAS. but there is a problem, i just open command prompt and set a ping to google public dns and also i ping yahoo ...
by wireless12
Mon Feb 22, 2016 12:54 pm
Forum: General
Topic: SNAT
Replies: 1
Views: 1157

SNAT

Dear Frds, i have CCR router i have configured eth1 as WAN and eth2 as LAN the wan ip of Router is 103.239.XXX.XX. i have a public ip pool of /25 (103.239.XXX.130 to 103.239.XXX.254) for SNAT i have added multiple /27 private ip pools on eth(LAN) 1st_32_IP_pool Gateway -> 172.17.0.1 Network/Cidr -> ...
by wireless12
Wed Sep 16, 2015 7:11 pm
Forum: General
Topic: DNS server and cache server
Replies: 4
Views: 1549

Re: DNS server and cache server

It's unlikely a DNS server will make anything blazingly fast. It may shave a few milliseconds off...
Ok, then what should i do to give my customer a faster surfing and streaming experience.

Regards
by wireless12
Wed Sep 16, 2015 6:05 pm
Forum: General
Topic: DNS server and cache server
Replies: 4
Views: 1549

DNS server and cache server

Dear all friends, i have got a handful of more then 850 + concurrent customers under my ISP belt. the Broadband provided to them through RF only, with the help of CPE. i m in search of some brilliant, blazing fast, very robust, rock solid DNS server solution for my clients. and i wanna do it in such...
by wireless12
Wed Oct 03, 2012 12:21 pm
Forum: Beginner Basics
Topic: latecny prob
Replies: 3
Views: 1606

Re: latecny prob

its simply interference prob..how many wireless providers are running in small area like kosi? how many sectors u are using and, does all the sectors are connnected to seperate mikrotik.? tell us more may be we can find out the prob.
by wireless12
Tue Jul 17, 2012 11:04 am
Forum: General
Topic: Suguest me for Wireless
Replies: 3
Views: 1046

Re: Suguest me for Wireless

Respected seniors. i have a wireless network. in which i m using. Omini 15 Dbi Antena with Bullet m2 and Mikrotik Router OS on my pc. but i m not satisfied with transmiting of the Data.. wheni got more then 5 connection activ then browsing speed goes down. and client cannot get even 100 kb transfer...
by wireless12
Tue Jul 17, 2012 10:58 am
Forum: General
Topic: Suguest me for Wireless
Replies: 3
Views: 1046

Re: Suguest me for Wireless

Respected seniors. i have a wireless network. in which i m using. Omini 15 Dbi Antena with Bullet m2 and Mikrotik Router OS on my pc. but i m not satisfied with transmiting of the Data.. wheni got more then 5 connection activ then browsing speed goes down. and client cannot get even 100 kb transfer...
by wireless12
Tue Jul 17, 2012 10:51 am
Forum: Wireless Networking
Topic: new products
Replies: 14
Views: 2780

Re: new products

I'm sorry but we do not discuss unannounced products. Keep an eye on our MUM events for new product announcements.
ok..by the way luckily this MUM in AUG 2010 is going to held in INDIA but i m confuse whether it would held in DELHI or in MUMBAI.


Regards
by wireless12
Tue Jul 10, 2012 11:57 am
Forum: Wireless Networking
Topic: new products
Replies: 14
Views: 2780

Re: new products

Thanks for sharing your ideas. We are also working on higher gain products for the future.
oh that is fantastic but could u please give us a little hint of your new products of higher gain. and what is the approximate time and month of its launching.


Regards...
by wireless12
Tue Jul 10, 2012 10:19 am
Forum: Wireless Networking
Topic: new products
Replies: 14
Views: 2780

Re: new products

Similar and with more gain is the SEXTANT. It has a bigger gain antenna and works great. It is a 2x2 antenna too. For example: http://routerboard.com/RBSEXTANTG-5HnD thx one again normis i appreciate your reply i m aware of RBSEXTANTG-5HnD but its only have a 18 dbi gain and Ubnt Nanobrdige is of 2...
by wireless12
Tue Jul 10, 2012 10:11 am
Forum: Wireless Networking
Topic: new products
Replies: 14
Views: 2780

Re: new products

Please clarify what features exactly are you interested in? We always consider user opinions when planning for new products. Let us know what features are missing from current product line, and we will see how to make them. thx normis first of all i would like to say without fear and hesitation tha...
by wireless12
Tue Jul 10, 2012 9:45 am
Forum: Wireless Networking
Topic: new products
Replies: 14
Views: 2780

new products

i would like to see something like NBM5 from mikrotik. when?? is mikrotik planning to launch new products in wireless category.



Regards
by wireless12
Sat May 05, 2012 9:39 am
Forum: Wireless Networking
Topic: Dbii card mis readings TX power
Replies: 4
Views: 1693

Dbii card mis readings TX power

Dear all i have orderd a DBII F-50 PRO, and i fix it in a RB 411 AH with ROS version 5.11. but when i configure it i see a low tx power values. its show only 19 dbm max. while in its data sheet it shows 27 dbm. i have replaced it in another RB 411 AH with version 5.4 but issue remain unchanged. now ...
by wireless12
Mon Jan 16, 2012 6:30 am
Forum: Wireless Networking
Topic: strange problem.
Replies: 1
Views: 889

strange problem.

hi @all one of my mikrotik have a strange issue. when i connect my mikrotik directly into my laptop it appears in winbox and i can able to ping this mikrotik also but when i plugged the mikrotik in a switch and connect my laptop to the switch then neither it appears in Winbox nor i can ping it.. thi...
by wireless12
Fri Jan 06, 2012 7:10 pm
Forum: Wireless Networking
Topic: Access list rule
Replies: 5
Views: 1740

Re: Access list rule

dear@all
No ideas...??
by wireless12
Fri Jan 06, 2012 3:02 pm
Forum: Wireless Networking
Topic: Access list rule
Replies: 5
Views: 1740

Re: Access list rule

if you have 3rd party clients (cpe) then the upload limit from the clients will not be limited as it isn't possible to tell the client not to send the traffic so fast. If you would have Mikrotik CPE it would use those upload limits. Thx for reply, but it work when i set same values in AP Tx limit a...
by wireless12
Fri Jan 06, 2012 1:34 pm
Forum: Wireless Networking
Topic: Access list rule
Replies: 5
Views: 1740

Re: Access list rule

hello, knock knock anybody there?
by wireless12
Fri Jan 06, 2012 9:19 am
Forum: Wireless Networking
Topic: Access list rule
Replies: 5
Views: 1740

Re: Access list rule

dear @all

no idea!!!!


Regards
by wireless12
Fri Jan 06, 2012 5:53 am
Forum: Wireless Networking
Topic: Access list rule
Replies: 5
Views: 1740

Access list rule

i wanna set some rule for my client CPE's (they all are TPLINK-501G with patch anetnna.) i wanna set different Rx, Tx limit for each different station of my access point using AP Access Rule policy. for example i want that station A could be able to download not greater then 2Mbps(2048kbps) and coul...
by wireless12
Fri Oct 07, 2011 7:54 pm
Forum: Wireless Networking
Topic: 20Mbps 1:1
Replies: 6
Views: 1938

Re: 20Mbps 1:1

Dude simple just put 2x SXT with dish u will get more than 20:20mbits thxx. is not abou 20Mbps 1:1 i m aslo able to push this much of traffic with ease but its not stable, lot of spikes in latency, aslo the through put increases and decreases ever then and now, some time its reaches to 40-50 Mbps o...
by wireless12
Wed Sep 28, 2011 7:23 am
Forum: Wireless Networking
Topic: Wireless Full Duplex with the latest Technology
Replies: 4
Views: 2564

Re: Wireless Full Duplex with the latest Technology

I have deployed Dual Wireless OSPF links and they do work well and provide the required reldundancy.
are these dual OSPF links are transparent bridges.


Regards
by wireless12
Wed Sep 28, 2011 7:11 am
Forum: Wireless Networking
Topic: 20Mbps 1:1
Replies: 6
Views: 1938

Re: 20Mbps 1:1

no response..
by wireless12
Tue Sep 27, 2011 8:31 pm
Forum: Wireless Networking
Topic: 20Mbps 1:1
Replies: 6
Views: 1938

20Mbps 1:1

hello everyone last day i got a call from a desperate customer asking for a dedicated link of 20 Mbps internet connection i.e 20 Mbps up and 20 Mbps down. he is already having the service of another WISP, and in past he also tried couple of other WISP in the area. he complained me about the poor spe...
by wireless12
Tue Aug 30, 2011 9:52 am
Forum: Wireless Networking
Topic: what wireless security
Replies: 2
Views: 976

what wireless security

hiii.

i m looking for a decent security steps for my 5GHz CPE's.
which form of security is better and why?
WPA(TKIP or AES) or WPA2(TKIP or AES) i have read some where that WPA is better if u need throughput. plz suggest your ideas.

Thx
Regards.
by wireless12
Tue Aug 30, 2011 9:47 am
Forum: Wireless Networking
Topic: help a dying small wireless ISP
Replies: 11
Views: 3070

Re: help a dying small wireless ISP

come on its so BIG that they will not talk to us. well the ISP is Tiokna digital networks. Regards Ohh...TIKONA ......hahahahaha.... If u are giving proper service to ur customers TIKONA can do nothing .. we are taking TIKONA head on. and they can't even touch 1 customer. I agree they have very com...
by wireless12
Mon Aug 29, 2011 3:01 pm
Forum: General
Topic: back up and restore
Replies: 1
Views: 1012

back up and restore

hiii how we can take backup of a RB settings and then restore these settings to a fresh and new RB. actually its takes lot of time to configure a RB, so instead of configuring a new routerboard i just download the backup file in this new routerboard and this will save my time.. i generally do this i...
by wireless12
Mon Aug 29, 2011 2:11 pm
Forum: Wireless Networking
Topic: help a dying small wireless ISP
Replies: 11
Views: 3070

Re: help a dying small wireless ISP

come on its so BIG that they will not talk to us.
well the ISP is Tiokna digital networks.

Regards
by wireless12
Mon Aug 29, 2011 10:50 am
Forum: Wireless Networking
Topic: help a dying small wireless ISP
Replies: 11
Views: 3070

Re: help a dying small wireless ISP

yes that big ISP is still in market and previously they were using locostation 2 as CPE and ruckus at their base station. but now they are using rukus for CPE TOO. BUT FOR BACKHAUL THEY ARE USING NANOBRIDGE5. they are going on and on and capturing a huge market...they are spreading like a huge cloud...
by wireless12
Tue Aug 09, 2011 1:35 pm
Forum: General
Topic: help help help
Replies: 12
Views: 1828

Re: help help help

your signal is -50/-50, how can the link "not connect"?? either your nv2 settings were wrong, or some other reason. upgrade to v5.6 where we have more detailed logs, and make a supout.rif file when it doesn't connect i dont know why, its a mere 6 km link but it appears to be 60 km link. o...
by wireless12
Tue Aug 09, 2011 1:24 pm
Forum: General
Topic: help help help
Replies: 12
Views: 1828

Re: help help help

please upgrade to v5.6 Try using advanced rate-selection in the Data-rates tab (do that on both AP and station). Enable the 20/40Mhz HT Above(Below) channel width to use 40mhz option cince you were using 5ghz-turbo in old setup. Make sure you use the same frequencies. Try disabling adaptive noise-i...
by wireless12
Tue Aug 09, 2011 1:00 pm
Forum: General
Topic: help help help
Replies: 12
Views: 1828

Re: help help help

you are running bandwidth test on the groove itself? this is the problem. bandwidth test generates a lot of random data, this impacts the CPU and you don't get any speed. correct way to test is: [powerful pc] --> [grove] -- [groove] ---> [powerful pc] i have done it too the results are the same, i ...
by wireless12
Tue Aug 09, 2011 12:45 pm
Forum: General
Topic: help help help
Replies: 12
Views: 1828

Re: help help help

data rates = default wds mode = disable, tx-power = default
here are the pictures of site-B
by wireless12
Tue Aug 09, 2011 12:35 pm
Forum: General
Topic: help help help
Replies: 12
Views: 1828

Re: help help help

CCQ = 70-90 sometimes above 90%
Data rates = default, tx power= default. WDS= dynamic
here are the pictures for Site -A
by wireless12
Mon Aug 08, 2011 5:16 pm
Forum: General
Topic: help help help
Replies: 12
Views: 1828

help help help

any one can tell me how to get a decent through put using groove. i am only getting 12 Mbps one side throughput on a transparent bridge, using Ros 5.5 on both groove. and i use 29 dbi grid antenna in hope to achieve more throughput. i have tried every possible settings... but all in vain. i have ano...
by wireless12
Sun Aug 07, 2011 3:12 pm
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

thx
i think the prb is solved let see how long it will work

Regards
by wireless12
Sun Aug 07, 2011 11:05 am
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

just copy and paste your etherner mac address into the Admin mac-address.
you mean to say the Ethernet mac address of my routerboard



Regard.
by wireless12
Sun Aug 07, 2011 10:14 am
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

Make sure you enable RSTP and static MAC address for all WDS bridges. admin-mac=xx:xx:xx:xx:xx:xx auto-mac=no where to do these settings in winbox this is on the bridge interface... look at the left panel once you login via winbox. there is bridge, click on it. i can see the protocol mode = None, S...
by wireless12
Sun Aug 07, 2011 9:32 am
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

Make sure you enable RSTP and static MAC address for all WDS bridges.
protocol-mode=rstp admin-mac=xx:xx:xx:xx:xx:xx auto-mac=no
where to do these settings in winbox


regards.
by wireless12
Sun Aug 07, 2011 8:22 am
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

previously we also thought that there might be an issue with the routerboard but all new routerboard 711A and Groove 5A all with ROS 5.0 or higher hav the issue.. how ever to over come this i use MPLS and vpls transparent bridge and i also get great through put but the latency is very unstable and ...
by wireless12
Sat Aug 06, 2011 7:56 pm
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

previously we also thought that there might be an issue with the routerboard but all new routerboard 711A and Groove 5A all with ROS 5.0 or higher hav the issue.. how ever to over come this i use MPLS and vpls transparent bridge and i also get great through put but the latency is very unstable and t...
by wireless12
Sat Aug 06, 2011 5:24 am
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

Re: how to prevent loop

but why ts happening in ROS versions above 5.0 and not in below 5.0.


regrads
by wireless12
Wed Aug 03, 2011 9:42 pm
Forum: Wireless Networking
Topic: nv2 for legacy 5 GHz
Replies: 1
Views: 877

nv2 for legacy 5 GHz

hello everyone
is NV2 is specially meant only for "n" or could it be used with old a/b/g (5,10,20,40 MHz) regular protocols.


Regards
by wireless12
Wed Aug 03, 2011 9:25 pm
Forum: Wireless Networking
Topic: how to prevent loop
Replies: 15
Views: 3120

how to prevent loop

hiii i have got 6-10 point to point transparent wireless link... the summary of configuration is: i create a bridge interface and wds interface and then add ether-1, wlan-1, and wds1 to brdige interface in wireless setting i kept mode = bridge, wds= dynamic and in wds-1 interface i add the mac addre...
by wireless12
Fri Jul 29, 2011 6:47 pm
Forum: Wireless Networking
Topic: Mikrotik And Nano Loco 2
Replies: 8
Views: 2535

Re: Mikrotik And Nano Loco 2

You save 40$ but you will save a lot of time spending fixing client connections.. ?
is fixing client connections is not necessary with mikrotik. is NV2 is better then airmax.. pl z through some light.

Regards
by wireless12
Fri Jul 29, 2011 6:44 pm
Forum: Wireless Networking
Topic: Mikrotik And Nano Loco 2
Replies: 8
Views: 2535

Re: Mikrotik And Nano Loco 2

I suggest the first choice btw
any specail reasons for that

Regards
by wireless12
Tue Jul 26, 2011 5:48 pm
Forum: Beginner Basics
Topic: no support for freq. above 5825 for RB711-5Hn-MMCX
Replies: 13
Views: 2675

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

i think u have configured a ptp wireless transparent link using MPLS/Vpls, if so then u cant use those frequencies which are not marked as BOLD or in dark black in frequency list. this is wrong! if your link fails, it means that the other end of the link doesn't support the selected frequency. what...
by wireless12
Mon Jul 25, 2011 9:11 pm
Forum: Beginner Basics
Topic: optimizing a single chain 5GHz link
Replies: 0
Views: 842

optimizing a single chain 5GHz link

hiii,
what steps and configurations could be done in order to get stable but maximum throughput and highest CCQ , in a single chain 5GHz-N transparent MPLS/VPLS wireless link.


Regards
by wireless12
Mon Jul 25, 2011 8:36 pm
Forum: Beginner Basics
Topic: no support for freq. above 5825 for RB711-5Hn-MMCX
Replies: 13
Views: 2675

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

hey thanx for the reply...

but that sounds strange.... :shock:

-sid
ji haan sarkar mere saath bhi aisa he hai.......
by wireless12
Mon Jul 25, 2011 8:05 pm
Forum: Beginner Basics
Topic: no support for freq. above 5825 for RB711-5Hn-MMCX
Replies: 13
Views: 2675

Re: no support for freq. above 5825 for RB711-5Hn-MMCX

hi normis... i tried what you said.. still no luck :( screenshots attached below: freq01.png freq02.png although when i shift to SUPERCHANNEL i can see a lot of frequencies.... but when i switch to any more than 5825 on both the link fails... please help. . i think u have configured a ptp wireless ...
by wireless12
Mon Jul 25, 2011 7:58 pm
Forum: General
Topic: comparison
Replies: 4
Views: 1303

Re: comparison

We now have the OmniTIK, the perfect AP for SXT: http://www.routerboard.com It's a strange question to be asking in a MikroTik forum. Of course Nv2 is better, that's why we make it. @Normis i know your product are really good and i use 97% mikrotik in my network, you always wanna escape when someon...
by wireless12
Sat Jul 23, 2011 12:14 pm
Forum: General
Topic: comparison
Replies: 4
Views: 1303

comparison

i wanna plant a 5.GHz MIMO PtMp setup for 25-50 users. 2Mbps up and 2 Mbps down. i m bit confused between Ubnt Airmax and Mikrotik NV2 which one is better.? Ubnt have many readymade products in hand like LocoM5, NanostatonM5 and off course NanoBridgeM5 for little more distance client while mikrotik ...
by wireless12
Sat Jul 23, 2011 10:55 am
Forum: General
Topic: RB7115-Groove5 40 Mhz
Replies: 2
Views: 1429

Re: RB7115-Groove5 40 Mhz

hello friends. when we use groove & RB 711 sereis in orthodox 5 GHz we can see & use only 5Ghz-5Mhz and 5GHz-10 MHz where is 5GHz-40 MHz is missing how to enable and use 5GHz-40MHz in regular 5 GHz band, note i know that in 5GHz-N i can enable 40MHz by setting above control or below control...
by wireless12
Sat Jul 23, 2011 10:53 am
Forum: General
Topic: RB7115-Groove5 40 Mhz
Replies: 2
Views: 1429

RB7115-Groove5 40 Mhz

hello friends. when we use groove & RB 711 sereis in orthodox 5 GHz we can see & use only 5Ghz-5Mhz and 5GHz-10 MHz where is 5GHz-40 MHz is missing how to enable and use 5GHz-40MHz in regular 5 GHz band, note i know that in 5GHz-N i can enable 40MHz by setting above control or below control ...
by wireless12
Thu Jul 21, 2011 1:00 pm
Forum: Wireless Networking
Topic: transparent bridge
Replies: 2
Views: 1010

transparent bridge

hello, we can bridge two networks transparently by following methods 1. WDS 2. MPLS/VPLS said to be 60 percent more faster. 3. EoIP question: why we mostly use WDS in compare to other methods. i have try to use MPLS/VPLS using 2 groove-5H-n i m able to see 45 Mbps one sided throughput but its highly...
by wireless12
Mon Jul 11, 2011 8:38 pm
Forum: Wireless Networking
Topic: getting best out of groove
Replies: 2
Views: 855

getting best out of groove

hello, is there any guide or documentation for configuring two groove for a transparently bridge two networks. to achieve maximum throughput i only manage 25 Mbps one direction only, i need more and expected more for this 6 KM link. i have tested every possible setting, signals are -50 to -55 very p...
by wireless12
Tue Jul 05, 2011 12:17 pm
Forum: Wireless Networking
Topic: p2p is killing my head
Replies: 4
Views: 1344

Re: p2p is killing my head

thx for reply.. i cant do such kind of things for my clients...because i m using a Linux based bandwidth management software to create internet packages. as it does not have such kind of traffic priority systems. is it possible to set in access rule for each client in my mikrotik AP or is there any ...
by wireless12
Tue Jul 05, 2011 11:12 am
Forum: Wireless Networking
Topic: p2p is killing my head
Replies: 4
Views: 1344

p2p is killing my head

i have a 411AH with Sector antenna. it have mostly 16-19 online concurrent user. with no issue. the pings to the CPE from AP is 1-3 ms regular but when any user start its torrent the pings goes as high as 2000-3000 and also request time out. this happens even only also a single client use torrent. a...
by wireless12
Sun Apr 24, 2011 6:56 pm
Forum: Wireless Networking
Topic: SXT With nv2
Replies: 12
Views: 4173

Re: SXT With nv2

[quote=
If you can - you need to improve your signal strengths. Try re-aligning the antenna's. If that doesn't help - You may need to switch to external antennas to get more gain.
[/quote]

how can we attach external antenna to SXT. because its has integrated antenna.

Regards
by wireless12
Sat Apr 23, 2011 7:30 am
Forum: General
Topic: what protocol
Replies: 1
Views: 907

what protocol

hello frds.

in point to point wireless bridge which protocol mode shd be selected STP or RSTP and why?
Pls help..


Regards
by wireless12
Fri Apr 22, 2011 3:59 pm
Forum: Wireless Networking
Topic: SXT With nv2
Replies: 12
Views: 4173

Re: SXT With nv2

It looks like you only have one chain enabled. I wrote a tutorial for connecting two SXT's together...you might skip to the configuration section for details on how to get the best out of your connection. http://www.wispforum.net/entry.php?5-How-to-Connect-two-Mikrotik-SXT-5D-s-In-Bridge-Mode-Part-...
by wireless12
Sat Apr 16, 2011 9:55 pm
Forum: Wireless Networking
Topic: how to tackle this problem.
Replies: 1
Views: 671

how to tackle this problem.

hello frds;- i have got a Linux based ISP level Bandwidth management with me. and i have installed it on a server class machine. then i have created IP pools like 172.17.10.xx and then i have assign separate private IP-address to each individual user in this server. and then i have assign internet p...
by wireless12
Wed Apr 13, 2011 7:46 pm
Forum: Wireless Networking
Topic: how to enable 40 MHz channel width in RB-711 series
Replies: 4
Views: 2292

Re: how to enable 40 MHz channel width in RB-711 series

if u have one of this RB711A-5Hn-M/RB711-5Hn-U/RB711-5Hn-M
in HT Tab select HT Extension Channel below/above control
is it below control or above control.

Regards
by wireless12
Mon Mar 21, 2011 8:23 pm
Forum: Wireless Networking
Topic: how to enable 40 MHz channel width in RB-711 series
Replies: 4
Views: 2292

how to enable 40 MHz channel width in RB-711 series

hello frds

how we can use and enable 40 MHz channel width in all RB 711 boards.
i can see only 5,10,20 MHz width.


Thx
by wireless12
Wed Mar 02, 2011 11:59 am
Forum: Wireless Networking
Topic: poor throughput of SXT
Replies: 11
Views: 2130

Re: poor throughput of SXT

set both devices to Nv2 mode. Also try to align them better, to improve signal. What about line of sight and interference? Could try to change frequency, use Snooper or Spectrum analyzer features to see other frequencies that are used. thanks normis. when i set both of these to NV2, the link betwee...
by wireless12
Wed Mar 02, 2011 6:10 am
Forum: Wireless Networking
Topic: poor throughput of SXT
Replies: 11
Views: 2130

Re: poor throughput of SXT

Try to use 40MHz channel width instead of 20mhz!
thx

but from where i can get 40 MHz enabled, i dont see this option in my SXT

ROS VERSION IS = 4.14
by wireless12
Wed Mar 02, 2011 6:07 am
Forum: Wireless Networking
Topic: poor throughput of SXT
Replies: 11
Views: 2130

Re: poor throughput of SXT

1. Your signal (-72/-75) is not that good. It should be-60 to -65. 2. You don't show us the SNR and CCQ. 3. Try enable HT Extention Channel --> below control 4. Enable nstreme (with framer policy=best fit and framer limit=3200) or NV2. i have set extension channel to below control but result was sa...
by wireless12
Tue Mar 01, 2011 8:22 pm
Forum: Wireless Networking
Topic: poor throughput of SXT
Replies: 11
Views: 2130

poor throughput of SXT

i wanna made a transparent bridge using two SXT but reults are horrible, can anyone tell me the trick to increase the throughput distance o link is approx 6 km.

thxs

here are the attachments
by wireless12
Mon Jan 31, 2011 6:19 pm
Forum: Wireless Networking
Topic: help a dying small wireless ISP
Replies: 11
Views: 3070

Re: help a dying small wireless ISP

Use MT RB450G or 493Ah for routing and nat-ing and for Sectors use Ubiquity AirMax Mimo Sector 16db or 19db with Rocket m5. For CPE's use Nanostation M5, NanoBridge M5... U can give speeds up to 10Mbps per user. 1 Sector can handle 30,40 users(depending on how much they use)... ahhh... :) thx for r...
by wireless12
Thu Jan 27, 2011 6:10 pm
Forum: General
Topic: bandwidth management for broadband users.
Replies: 1
Views: 772

Re: bandwidth management for broadband users.

hii..
surprise to see that no one have any idea of good Linux based Bandwidth management software...
how u people create packages for for home users,

regrads
by wireless12
Wed Jan 26, 2011 11:23 pm
Forum: General
Topic: bandwidth management for broadband users.
Replies: 1
Views: 772

bandwidth management for broadband users.

hii.. could somebody suggest me a decent and powerful Linux based bandwidth management software. to manage my broadband users. which must include username password authentications, mac address authentication, IP address authentications, IP pool management, post pay and prepay package management, ant...
by wireless12
Mon Jan 24, 2011 7:04 pm
Forum: Wireless Networking
Topic: help a dying small wireless ISP
Replies: 11
Views: 3070

Re: help a dying small wireless ISP

[quote=

I offer 2MB to my customers with Mikrotik and Ubiquiti gear; so I know it is doable. Some of my AP's have as much as 45 on them. [/quote].

how u do it. can u plz paste your AP and CPE Configurations and which ubiquity product u use for your cpe.

thx..
by wireless12
Mon Jan 24, 2011 3:23 pm
Forum: Wireless Networking
Topic: help a dying small wireless ISP
Replies: 11
Views: 3070

help a dying small wireless ISP

hello frds. everything was going fine, since a big ISP launch in my city, slowly this BIG ISP is eating up my costumers, they are offering 2Mbps speeds over wireless(2.4 Ghz), they are installing ruckus wireless CPE and ruckus wireless access point and they are using mesh. for back-haul they are usi...
by wireless12
Sun Jan 16, 2011 3:56 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 2574

Re: Success Report 70mbps rb411ah

Great! :)
What about signals? Please show us registration table, thanks.
hahaaaa haaaa..... :lol: well Mr. Miahac is not going to share anything with us...he wanna keep things secret..
by wireless12
Fri Jan 14, 2011 9:01 pm
Forum: RouterBOARD hardware
Topic: 5Ghz not working
Replies: 7
Views: 3499

Re: 5Ghz not working

one more thing, My AP is not supposed to be working like a DHCP. its simply must be passing the data to and fro. i need the mac address of the client computer so that it can bind the mac with the issued IP in the internet server. here is the scene = Internet server(private FIX IP being given to user...
by wireless12
Fri Jan 14, 2011 9:00 pm
Forum: RouterBOARD hardware
Topic: 5Ghz not working
Replies: 7
Views: 3499

Re: 5Ghz not working

one more thing, My AP is not supposed to be working like a DHCP. its simply must be passing the data to and fro. i need the mac address of the client computer so that it can bind the mac with the issued IP in the internet server. here is the scene = Internet server(private FIX IP being given to user...
by wireless12
Fri Jan 14, 2011 8:28 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 2574

Re: Success Report 70mbps rb411ah

hey "miahac"

where are u my dear Frd.

kindly tell us how u configure your Ap and your CPE step by step.

yours resluts makes me curious.

Thx and Regards.
by wireless12
Fri Jan 14, 2011 8:24 pm
Forum: RouterBOARD hardware
Topic: 5Ghz not working
Replies: 7
Views: 3499

Re: 5Ghz not working

few more pic of my CPE.

thx, plz suggest me
by wireless12
Fri Jan 14, 2011 8:20 pm
Forum: RouterBOARD hardware
Topic: 5Ghz not working
Replies: 7
Views: 3499

Re: 5Ghz not working

thx but its still not working

following r the attachments of my CPE
stat-3.GIF
stat-4.JPG
station-1.GIF
by wireless12
Mon Jan 10, 2011 6:58 pm
Forum: RouterBOARD hardware
Topic: 5Ghz not working
Replies: 7
Views: 3499

5Ghz not working

hello all this is my first 5 GHz-n PT-MP setup. but i m not able to configure it. i have one RB711-UFL(level 4) fixed with 90 deg. 5GHz sector and 5 CPE ( RB-711-UFl in an enclosure with 5 GHz 20 Dbi pannel antenna i want my setup work like this: setup.JPG but when i configure my AP-bridge and one C...
by wireless12
Fri Jan 07, 2011 3:41 pm
Forum: RouterBOARD hardware
Topic: new base station
Replies: 3
Views: 1396

Re: new base station

NV2 is still in Beta - if you will use all MT CPE - then just use Nstream until NV2 is stable :) It will work very well. thanks for response in what manner i should configure my AP (WDS-, Nstreame-settings etc,) and what settings i need in mikrotik CPE ? to get best results... thx, i would really a...
by wireless12
Sun Jan 02, 2011 7:13 pm
Forum: RouterBOARD hardware
Topic: Confused about 711 and 711A
Replies: 5
Views: 1892

Re: Confused about 711 and 711A

this is rate race, we people are crazy to earn money by any means we can, even by befooling our frds, we hav lost honesty completely, off course we are civilized and living in scientific age. no space for truth. u have been cheated by ur disributor, my dear frd.

Regards.
by wireless12
Sat Jan 01, 2011 6:37 pm
Forum: Wireless Networking
Topic: Success Report 70mbps rb411ah
Replies: 8
Views: 2574

Re: Success Report 70mbps rb411ah

great stuff.

can u show us snapshot how u configure your AP and and off course the snap shot of ur Cpe configuration too, any special settings in advance Tab.

thx
by wireless12
Sat Jan 01, 2011 1:59 pm
Forum: RouterBOARD hardware
Topic: new base station
Replies: 3
Views: 1396

new base station

hii.. i m planning for a new base station in 5.8 GHz n only in one chain. becuase we dont have good Mimo antenna aviable here. for base station. moreover even miktriok dont hav a Mimo package as like RB711, it only have a/n single chain, so we dont have good Mimo Cpe package for clients. so we decid...
by wireless12
Thu Dec 30, 2010 9:53 am
Forum: RouterBOARD hardware
Topic: which one is better
Replies: 1
Views: 889

which one is better

hii..

which one is better 5GHz n 2*2 chains or Nstreame-dual in terms of bandwidth capacity, stabilty and speeds.

thx
by wireless12
Fri Dec 10, 2010 2:51 pm
Forum: RouterBOARD hardware
Topic: 5.8 N 2*2 chains
Replies: 2
Views: 1099

5.8 N 2*2 chains

hiiii.

if i use in 5.8 Ghz n 2*2 chians , then will it become a full duplex link like we hav in N-stream-2


thx
by wireless12
Thu Oct 28, 2010 10:30 am
Forum: The Dude
Topic: RJ45 connetors
Replies: 3
Views: 1534

RJ45 connetors

hiii. in our outdoor installtion. we use ordinary RJ45 connectors from mikrotik to POE, but we need to change the connectors after few months climbing all the way to the mikrotik on tower because the Ethernet stop responding, its shows unplugged when directly connected to LAPTOP when connected to LA...
by wireless12
Sat Oct 23, 2010 9:51 pm
Forum: Wireless Networking
Topic: need suggestions
Replies: 1
Views: 874

need suggestions

i hav bought a 5.8 Ghz vertical sector Pannel antenna 90 degree coverage.(Hyperlink) i m planning to fix it with RB 411 AH with R52Hn card. actually i got 20-30 potenial coustomers towards west side of my tower which can produce me some big profit s. but most of them are not ready to pay for a point...
by wireless12
Sat Oct 23, 2010 9:28 pm
Forum: Wireless Networking
Topic: confused about antenna selection
Replies: 5
Views: 1798

Re: confused about antenna selection

ROS 4.11 is OK for N. Please post your results using the R52HN cards when you know them. I will be very, um, curious to see how well it works for you................ hii..sorry but i dont hav enough time to install new R52Hn cards..bec i m busy with some other network issues.. but i will definately...
by wireless12
Thu Oct 21, 2010 7:33 am
Forum: Wireless Networking
Topic: confused about antenna selection
Replies: 5
Views: 1798

Re: confused about antenna selection

ROS 4.11 is OK for N. Single chain N is still very fast. You will see a big speed increase from 802.11a to 802.11n so its means its not neccessary to change antenna if i need single and still i can get better speed then 802.11.a, right ? can i use WDS to create point to point link using "N&quo...
by wireless12
Wed Oct 20, 2010 8:03 pm
Forum: Wireless Networking
Topic: confused about antenna selection
Replies: 5
Views: 1798

confused about antenna selection

hii i hav got a PTP link at 5 Km distance using Site A = 411AH+compex 23 mw a/b/g card running at 5.8(Turbo 40MHz) + 5 GHz 24 dbi hyperlink Grid antenna Site B = 411AH+compex 23 mw a/b/g card running at 5.8(Turbo 40MHz) + 5 GHz 24 dbi hyperlink Grid antenna i got a 35 Mbps one side throughput out of...
by wireless12
Thu Oct 14, 2010 8:19 pm
Forum: Wireless Networking
Topic: a new range of mikrotik hardware
Replies: 2
Views: 1310

a new range of mikrotik hardware

hiii.. can we hopeful to see something similar sort like ubiquity airmax range from mikrotik. no doubt mikrotik is an excellent stuff. but we would me more then happy to see something like ubiquity frm mikrotik. no tension for antenna selections no worry for pigtail all mikrotik setup. a nice decent...
by wireless12
Mon Oct 11, 2010 8:41 pm
Forum: Wireless Networking
Topic: RB411AH VS RB433AH
Replies: 4
Views: 2208

RB411AH VS RB433AH

hi.... i m a wisp and i got three 120 degree sector antenna on my tower. and each sector is being separately connected to a RB 411AH. so i got three sectors and three RB411AH. and i use XR2 card in each of them. each sector have more then 40 allowed CPE by using access list feature in mikrotik. howe...
by wireless12
Sat Aug 28, 2010 8:45 pm
Forum: Beginner Basics
Topic: cpu utilization?
Replies: 0
Views: 529

cpu utilization?

hello frds. can interference increase CPU load. i m using 5875 and there are more then 15 PTP mikrotik based link on same mast.on same band. i noticed heavy CPU load upto 20 % ...and immediately the ping increase..but as soon as the CPU load come down to 2-4 % then the ping beacome absolutely stable...
by wireless12
Sun Jun 27, 2010 9:03 pm
Forum: Wireless Networking
Topic: can 433 board support 2 mbps load
Replies: 10
Views: 2339

Re: can 433 board support 2 mbps load

dear murali

i think u ar using TP link at clinet side, just change the country to japan or India of those client who are not able to connect when u change the frequency to channel 12 , 13.

Good luck
by wireless12
Sun Jun 20, 2010 7:57 pm
Forum: Wireless Networking
Topic: setting the correct time and date
Replies: 1
Views: 720

setting the correct time and date

hello all,

in all of my mikrotik devices when i see the LOG table, i dont see the correct time, so i m not bale to see the right time of any LOG.
i live in INDIA, i wanna set the LOG time and date according to Indian stand time.[IST]
how to do it..?

Thx & Regards.
by wireless12
Tue Jun 15, 2010 7:20 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

Glad to see you finally listened to me. Running one box at ROS 4.x and one at ROS 3.x was not a good idea. Do this: 1. upgrade to ROS 4.10 or 5.x beta 2. enable nstreme, enable polling, and disable CSMA 3. increase rate to 48mbps only and see if you get 100% CCQ and good power report back with your...
by wireless12
Mon Jun 14, 2010 8:00 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

hi @colebert i hav manully fixed data rates to 24Mbps, and now i can push arround 23 Mbps in bandwidth test one direction. how can i produce more throught over this link. should i set the data rates to 36 or 48 Mbps to achive more through put... i wanna see aroound 35 to 40 Mbps over this link..i wo...
by wireless12
Mon Jun 14, 2010 7:53 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

hello all, finally get the prob solved, i hav one 411 with ROS 4.5 and compex 23 dbm a/b/g card i just changed miktoik box at Site-A with the above box on same antenna... and the link beacome stable, aslo when i see the tx power setting ROS shows the correct 23 dBm also i manulayy fixed data rates t...
by wireless12
Mon Jun 07, 2010 7:22 pm
Forum: Wireless Networking
Topic: Planning for a 5.8 Ghz Pt-MTP sloutions.
Replies: 8
Views: 2173

Re: Planning for a 5.8 Ghz Pt-MTP sloutions.

hello... why all genius are silent over this question. does a point to mulit point solution dont work good in 5.7-5.8 GHz? why exprets and veteran mikrotik users. are not giving suggestion.. plz help.. @ normis,ste, aaa,colebert,desert admin,media net,chupaka,MRZ,jainisk,tom...,changeip...i m scream...
by wireless12
Sun Jun 06, 2010 5:30 pm
Forum: Wireless Networking
Topic: Planning for a 5.8 Ghz Pt-MTP sloutions.
Replies: 8
Views: 2173

Re: Planning for a 5.8 Ghz Pt-MTP sloutions.

thx for reply.

i cant go for ubiquity products, they are not easily available in my country and if some how i got them then they got issue of warranty cover.

so i like to go wid mikrotik.
by wireless12
Sun Jun 06, 2010 4:18 am
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

Dear All,

i found out some eror in site-B system health, while Site-A hav good system health.
is this is the reason by which this link hav less signals.
by wireless12
Sun Jun 06, 2010 4:09 am
Forum: Wireless Networking
Topic: Planning for a 5.8 Ghz Pt-MTP sloutions.
Replies: 8
Views: 2173

Re: Planning for a 5.8 Ghz Pt-MTP sloutions.

still waiting for response
by wireless12
Sat Jun 05, 2010 5:58 am
Forum: Wireless Networking
Topic: Planning for a 5.8 Ghz Pt-MTP sloutions.
Replies: 8
Views: 2173

Re: Planning for a 5.8 Ghz Pt-MTP sloutions.

humm...really a tough question, its hard to suggest right????
by wireless12
Fri Jun 04, 2010 7:38 pm
Forum: Wireless Networking
Topic: Planning for a 5.8 Ghz Pt-MTP sloutions.
Replies: 8
Views: 2173

Planning for a 5.8 Ghz Pt-MTP sloutions.

hii all.. while 2.4 Ghz is getting crowded day by day, its very difficult to mange wireless ISP, scanning shows 100's of networks..result is poor services to the coustomers. so i hav decided to use 5.8 Ghz to deliver internet to my main & certain big coustomers. But i m confused in planning it. ...
by wireless12
Wed Jun 02, 2010 11:08 am
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

.

Is there a reason you are not addressing the Nstreme issue I have been mentioning?

.
Both sites are configured as bridge mode as far as i know i must make site-A as Access point and site-B as station

for some reason i m using bridge mode

Regards...
by wireless12
Tue Jun 01, 2010 1:56 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

You prolly have a competing signal. Or...... Your example shows India as your frequency on one side with superchannel on while the other side is set to "no_country_set" with "manual txpower" on. Please make sure that they are both what ever country freqs you want to use but you ...
by wireless12
Tue Jun 01, 2010 1:53 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

Is "antenna mode" set to "antenna b" for a reason? i set anntena mode to B bec my vendor toild me that he hav got no good quality pigtail for MMCX connector, and he hav good quality for UFL connector. so i use antenna B, but after getting such unwanted results i bought a MMCX fr...
by wireless12
Tue Jun 01, 2010 1:49 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

Try other cards. May be you have blown them. You dont need high power for this short link using high gain antennas. R52(n) does the job. i have changed with a new pair of mini pci compex 26dBm same model but with no success, the scene remain the same...but when i put in R52h card in both of them th...
by wireless12
Tue Jun 01, 2010 1:46 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

i noted something may be this is the cause..i m using 26 dbm but when i see the card tx-power in both boxes its shows as under: if i m not mistaken it shd be 26 dbm, sorry for bad english.. and even if i try to increase it manually the signals dont even increase by 1dBm
by wireless12
Tue Jun 01, 2010 5:09 am
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

no anntena are correctly align... we spent 5-6 hours just to align the antenna..


thx
by wireless12
Tue Jun 01, 2010 3:55 am
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

Re: frustration all around

Turn on Nstreme, enable polling, disable CSMA. Set HW Retries to 15 You have very low signal strength for a PTP link of this distance. You should investigate possible LOS issues or come clean about what kind of antennas you are using. antenna are hyperlink-5.7-5.8 Ghz 24 dbi grid less then i mtr of...
by wireless12
Mon May 31, 2010 2:29 pm
Forum: Wireless Networking
Topic: frustration all around
Replies: 31
Views: 5113

frustration all around

hello frds. i m facing a starnge prob here. i hav configured a PTP wireless link for 5 km (air distance) but the link is very unstable. sometimes the ping varies from 1-3 ms but anytime it goes as high as 500-900 ms i m using RB-433AH at both ends. with compex 26dbm mini pci cards. Note- changed ant...
by wireless12
Mon Apr 26, 2010 8:34 am
Forum: Wireless Networking
Topic: polarization???
Replies: 3
Views: 1215

polarization???

hello evryone,

what are the advantages and disadvantges in point to point and also in Point to Multipoint of vertical polarization over horizontal polarization. in 5GHz band ?

thx.
by wireless12
Tue Apr 20, 2010 12:26 pm
Forum: Wireless Networking
Topic: Bandwdith management software suggestions
Replies: 2
Views: 1029

Bandwdith management software suggestions

hii..

can anyone suggest me a good bandwidth management software..for 500 concurrent users. must be good in controlling spam, fishing, arp spoofing, arp poisoning, stateful firewall, a really good solution, plzz suggest

thxx
by wireless12
Mon Dec 14, 2009 9:23 am
Forum: RouterBOARD hardware
Topic: strange problem, its irritating
Replies: 5
Views: 1773

Re: strange problem, its irritating

dear@eneimi...thx i m using RB411AH with alfa-200 mw card. i m running on channel 13 (my ssid is MOSSKER) and my competitor ssid is alpha numeric(if u look into the scan list) if u deeply notice the sacn list u find the hidden SSID's all run on channel 6, and look at the mac address of all those hid...
by wireless12
Sun Dec 13, 2009 6:26 pm
Forum: RouterBOARD hardware
Topic: strange problem, its irritating
Replies: 5
Views: 1773

strange problem, its irritating

hello..frds i hav got three 120 sectors on my mast...for 2 years now. (without any problem )one of my sector antenna is facing towards west..unfortunately 15-20 days back a new competitor has installed his mast 400 meter away towards west side of my tower he is using one omni antenna for disturbtion...
by wireless12
Sun Oct 25, 2009 3:54 pm
Forum: RouterBOARD hardware
Topic: R5H problems
Replies: 72
Views: 22460

Re: R5H problems

hii..
ya u are right. purchased two R5H for a important point to point link. with huge expectations.
one of them endded at time of configuation.
its really hurt.

thx
by wireless12
Fri Oct 23, 2009 5:50 pm
Forum: RouterBOARD hardware
Topic: what to do?
Replies: 1
Views: 837

what to do?

hello all.. i hav got few RB 133/133c, i hav upgarded their ROS to 3.13 but they didnt perform upto the expectations, they trouble me like anything, they will gonna make me nuts. so i decided to downgarde..but all in vain.. mikrotik have deleted the older version of ROS. now where to find them and w...
by wireless12
Thu Sep 17, 2009 10:18 am
Forum: Wireless Networking
Topic: possible to carry or not?
Replies: 3
Views: 1005

Re: possible to carry or not?

hello....i think the answer is no, bec everyone is silent...?

bad luck to me..
i was hoping mikrotik can do it..


regards..
by wireless12
Wed Sep 16, 2009 3:26 pm
Forum: Wireless Networking
Topic: possible to carry or not?
Replies: 3
Views: 1005

possible to carry or not?

hii.. i got a call to give 8 Mbps dedicated internet bandwith for a export house.. the arial distance between my POP and the Export house is 24 Km...LOS is clear.(i have got bandwidth already on single ethernet interface at my POP) is it possible for mikrotik to carry 8 Mbps premium dedicated intern...
by wireless12
Wed Sep 16, 2009 3:15 pm
Forum: Wireless Networking
Topic: comparison
Replies: 1
Views: 648

comparison

hiiii... when we look into the hardware details of 411AH and 433AH RB411AH have: CPU =680MHz RAM =64MB Architecture MIPS-BE LAN ports 1 MiniPCI 1 CPU =680MHz RAM =128MB Architecture= MIPS-BE LAN ports= 3 MiniPCI =3 Memory Cards =1 Memory card type =microSD 1.now if i wanna use only one mini pci card...
by wireless12
Wed Sep 02, 2009 4:18 pm
Forum: Wireless Networking
Topic: BAD BLOCKS.
Replies: 5
Views: 1603

BAD BLOCKS.

hello evry1.. i hav just purchase a RB411AH i but when i see its resources i see 2 bad blocks... i wanna know that if it is not a thing to worry about. i m in doubt that this RB might hav been used used for some time somewhere else and then the resller sale it to me, as it has bad blocks... becuase ...
by wireless12
Thu Aug 20, 2009 4:55 pm
Forum: Wireless Networking
Topic: a simple wireless question
Replies: 1
Views: 720

a simple wireless question

hiiiii.. i hav got a 3-4 Point to point short distance wireless(2-4 km) link @5.8 GHz with 27 dbi grid antenna at both end futhremore RB411AH + R52 at both sides. i get decent throughput, but if i change these mini pci card with better cards like SR5, XR5, R5H or R52H or with any other card which wi...
by wireless12
Thu Aug 20, 2009 4:40 pm
Forum: Wireless Networking
Topic: a humble request!!!!!
Replies: 12
Views: 2807

Re: a humble request!!!!!

hii..

i think radwin and motorla also got this feautre..


regards..
by wireless12
Thu Aug 20, 2009 10:14 am
Forum: Wireless Networking
Topic: why my mikrotik got hanged most of the times?
Replies: 8
Views: 2361

Re: why my mikrotik got hanged most of the times?

really so big that even so called experts are not not willing to answer..
by wireless12
Thu Aug 20, 2009 10:13 am
Forum: Wireless Networking
Topic: why my mikrotik got hanged most of the times?
Replies: 8
Views: 2361

Re: why my mikrotik got hanged most of the times?

hiiii...
i think its a huge prob... and there is no sloution to it...m i right normis???

thx..
by wireless12
Wed Aug 19, 2009 4:17 pm
Forum: Wireless Networking
Topic: a humble request!!!!!
Replies: 12
Views: 2807

a humble request!!!!!

hii..

it would be great if mikrotik add a feautre where its shows airial distance between two mikrotik units in a point to point wireless link.

and also if it possible the distance of all CPE connected to a mikrotik AP-bridge.

thxxx..
by wireless12
Wed Aug 19, 2009 4:01 pm
Forum: Wireless Networking
Topic: why my mikrotik got hanged most of the times?
Replies: 8
Views: 2361

why my mikrotik got hanged most of the times?

hii.. i hav got many mikrotik install in my WISP network now, slowly i will make it a complete mikrotik gear only. mikrotik products are excellent, but i m having a liitle problem in all of them. my mikrotiks got hanged on regualar base may be in a month or two or may be in a week...but as soon as i...
by wireless12
Sun Aug 16, 2009 3:59 pm
Forum: Wireless Networking
Topic: My success story's
Replies: 4
Views: 1721

Re: My success story's

hi@vijay
Intersesting but frm where u got R5H, i dont think they are avialable in India..i m trying to buy it but the distributor in Delhi dont hav even single piece of them.. can u tell us the wlan configuration of both sides ..

regards.
by wireless12
Tue Jul 07, 2009 9:12 am
Forum: General
Topic: WHICH IS CORRECT POE ADAPTOR
Replies: 2
Views: 838

Re: WHICH IS CORRECT POE ADAPTOR

ooops..
seems to be a really tough question to answer..
by wireless12
Mon Jul 06, 2009 1:16 pm
Forum: General
Topic: WHICH IS CORRECT POE ADAPTOR
Replies: 2
Views: 838

WHICH IS CORRECT POE ADAPTOR

Hello everyone... We install various combinations of RB models and Mini- Pci models : for eg. 411+R52, 411AH+R5H, 411AH+XR2, etc. etc, Now we all know that few RB are more powerful then others, like RB 411AH is more powerful then 411,& 411A and 433AH is more powerful frm all of them. Similarly f...
by wireless12
Sat Jul 04, 2009 12:41 pm
Forum: General
Topic: cant able to reset RB133c by jumper setting.
Replies: 0
Views: 635

cant able to reset RB133c by jumper setting.

hello,

i forgot the password of one of my RB 133c i wanna rest it, i just short the jumpers as mentioned but it cant reset..

how to do it...? is shorting reset jumper really reset RB133c or the jumper is just there merely as a showpiece.
by wireless12
Sat Jun 20, 2009 12:07 pm
Forum: Wireless Networking
Topic: Superchannel & 40MHZ
Replies: 3
Views: 1683

Re: Superchannel & 40MHZ

if u have the superchannel license u can get from 4.9 to 6.1 band hiii, but are these 20 MHz channels or just 5 MHz width channels... someone frm ubiqiuty forum quoted " For those of you who don't understand, 201 20 MHz channels would require 4020 MHz bandwidth. Since the difference between 50...
by wireless12
Tue May 26, 2009 12:35 pm
Forum: Beginner Basics
Topic: will this method reduce or eliminate the interference
Replies: 3
Views: 1145

Re: will this method reduce or eliminate the interference

heyyyyyyyyyyy....whts up? is this is so much tough question.?
by wireless12
Mon May 25, 2009 12:49 pm
Forum: Beginner Basics
Topic: will this method reduce or eliminate the interference
Replies: 3
Views: 1145

will this method reduce or eliminate the interference

hii all. when we make a base station using 2.4 GHz, we have to face lot of difficulties due to extensive interfence in 2.4 GHz and it also hav only 3 non overlaping channels. some time its very hard to run our network in 2.4 GHz. But when we see in wireless setting we find 2 GHz-10MHz and 2 GHz-5Mhz...
by wireless12
Fri May 08, 2009 11:30 am
Forum: Wireless Networking
Topic: ap, changing wireless card, no client connected - problem
Replies: 6
Views: 1615

Re: ap, changing wireless card, no client connected - problem

hello, as u change the card its mac address also got changed....while ur all CPE's are looking for the old MAC, and when u got to the client end and connect to AP it caputre the new mac address and it works..so u must hav to go go to each coustomer to again connect to ur AP or may be u can change th...
by wireless12
Tue Apr 28, 2009 2:37 pm
Forum: Wireless Networking
Topic: really frustrating
Replies: 4
Views: 1377

Re: really frustrating

-----

solustion: turn off wireless topic of your access point log.
-----
and how to turn off wireless topic of my access point log?
by wireless12
Tue Apr 28, 2009 2:31 pm
Forum: Wireless Networking
Topic: Mikrotik AP problem! Please what can i do?, its urgent
Replies: 6
Views: 1795

Re: Mikrotik AP problem! Please what can i do?, its urgent

if you cant solve my problem i think you should let others do that for me my dear frd plz calm down anger and attitude takes u no where....just disscuss ur prob with cool head provide us the relevant details....i m sure one can help u out here.. rem always keep smiling even u cant... best of luck
by wireless12
Tue Apr 28, 2009 2:27 pm
Forum: Wireless Networking
Topic: really frustrating
Replies: 4
Views: 1377

Re: really frustrating

will turing off wireless log can solve the prob are u sure or the problem will remain same..
by wireless12
Tue Apr 28, 2009 11:57 am
Forum: Wireless Networking
Topic: really frustrating
Replies: 4
Views: 1377

really frustrating

hii... i m undergoing with a very critical problem with one of my mikrotik AP. actually letancy of CPE's varies frm 3-8 ms...but in a very short time and any time it spike and keep increasing and raeches uto 2000-3000, and finally all CPE's shows "Request time out". i just reebot the AP an...
by wireless12
Mon Apr 27, 2009 1:58 pm
Forum: Wireless Networking
Topic: Nstreme Advantages
Replies: 17
Views: 4097

Re: Nstreme Advantages

nstream is good, but sometime the hike in letancy could & may cause issue to low letancy needed stuffs.

regards
by wireless12
Sat Apr 11, 2009 8:17 am
Forum: Wireless Networking
Topic: negative impact
Replies: 3
Views: 1047

Re: negative impact

no replies yet this seems to be pretty tough question.
by wireless12
Fri Apr 10, 2009 5:16 pm
Forum: Wireless Networking
Topic: negative impact
Replies: 3
Views: 1047

Re: negative impact

heyy guys.

plz share ur thoughts..


thx
by wireless12
Fri Apr 10, 2009 3:20 pm
Forum: Wireless Networking
Topic: negative impact
Replies: 3
Views: 1047

negative impact

hello evryone, i hav one RB411 AH+compex 200 mw b/g (AP-bridge) RoS - 3.20 10 users are coneccted to it, ANI (AP-client mode) enabled, rest of the seetings are default. but the performance of this is not consistent, in a moment its work like a charm, just exactly what u hav expect frm mikrotik, but ...
by wireless12
Sat Mar 28, 2009 10:05 am
Forum: Wireless Networking
Topic: rb433ah interference between mpci cards
Replies: 75
Views: 23232

Re: rb433ah interference between mpci cards

well, its always better a RB with single minipci slot i mean its always better to use 411AH instead of 433AH (exceptions may be there) because of the following reasons: 1. if u are having only one 433ah and three mini pci crad then u must be using a single POE and adapotor and again only one Cat5 to...
by wireless12
Sat Mar 28, 2009 8:33 am
Forum: Wireless Networking
Topic: look at this combination.
Replies: 1
Views: 662

Re: look at this combination.

oooooops no ideas, no reply.where all experts are gone.
by wireless12
Thu Mar 26, 2009 2:20 pm
Forum: Wireless Networking
Topic: look at this combination.
Replies: 1
Views: 662

look at this combination.

hi guys..

411A or 411AH + compex WLM54G-26(400mw) for Point to mulipoint(b/g)

is this would be decent combination..atleast somewhere near to the combination of SR2 with these borads.

experts comments plzzzz.(its an urgent call.)

thxxx
by wireless12
Tue Mar 24, 2009 12:46 pm
Forum: Wireless Networking
Topic: what is the difference
Replies: 1
Views: 637

what is the difference

hi guys, if we look into the datasheets of various mini pci cards we come to know that almost each of them consist of different atherors chipsets for e.g compex WLM54G-26 hav got 2413 atheors chipset compex WLM54AG-23 Hav got 5413 atheors chipset CM9 hav got atheors 5004 chipset UBNT SR2 Hav got ath...
by wireless12
Mon Mar 23, 2009 2:33 pm
Forum: General
Topic: Minimize torrent download speed
Replies: 9
Views: 3404

Re: Minimize torrent download speed

opps i hope some day we can reduce download speed in a torrent download.
by wireless12
Fri Mar 20, 2009 11:22 am
Forum: General
Topic: identifying 411/411A/411AH
Replies: 3
Views: 979

Re: identifying 411/411A/411AH

hii

thanks, so much, this forum is great. keep it up
by wireless12
Thu Mar 19, 2009 12:17 pm
Forum: General
Topic: hotspot kills my LAN
Replies: 13
Views: 1955

Re: hotspot kills my LAN

ooooooooops if its really an ARP poisoning (i wish is is not) only GOD can save you. if suffer a lot by this issue and my entire wisp network become a fish market. but i don't know how i came out with it, i remember i disallow all the wlan interface and allow them one by one only after formating the...
by wireless12
Thu Mar 19, 2009 10:50 am
Forum: General
Topic: identifying 411/411A/411AH
Replies: 3
Views: 979

identifying 411/411A/411AH

HI.

if we look at RB 411,411A,411AH they almost look same, is there any difference in layout or any chip so that we can identify that this is RB 411, this is RB411A and this is 411AH, just by looking at the board. or what are other methods to confirm the exact models of RB.

thx.
by wireless12
Thu Mar 19, 2009 10:45 am
Forum: Wireless Networking
Topic: about ANI?
Replies: 1
Views: 824

about ANI?

hii.

will ANI work exactly same in both SR2 and XR2 or will it work better in XR2 bec XR2 is 6th generation atheors AR5414 cards while SR2 is 4th generation atheors AR5213 card.(RB will be 411A) ROS version. would be 3.10

thxxx.
by wireless12
Mon Mar 16, 2009 2:09 pm
Forum: Wireless Networking
Topic: mini pci support for 411/411a
Replies: 5
Views: 2186

Re: mini pci support for 411/411a

ok..
i would be more then happy if someone share more ideas on this...
411A+16dbi sector antenna+??????(?= which mini pci) to feed 25 wireless users in 3km area

knock knock @jwcn,mrz,roc-noc,jp,normis,angboontiong,jordantrx,kameelperdza, plz put some light on this issue.
by wireless12
Mon Mar 09, 2009 2:47 pm
Forum: Wireless Networking
Topic: Best ROS version for RB133's ?
Replies: 6
Views: 1694

Re: Best ROS version for RB133's ?

I have found the best version is V2.9.51. Some of the functions that are available in the V2.9 version will not work on V3.X on the RB133. I think it may be a memory challenge.
which functions u are talking about which will work on v2.9.51 and not in version 3.x
by wireless12
Mon Mar 09, 2009 2:44 pm
Forum: Wireless Networking
Topic: 60km wireless link
Replies: 12
Views: 4363

Re: 60km wireless link

nice staticts
by wireless12
Mon Mar 09, 2009 2:02 pm
Forum: Wireless Networking
Topic: signal to noise
Replies: 9
Views: 23359

Re: signal to noise

Here's the average value of one of the SU: Signal Strength -69 dBm TX Signal Strength -71 dBm Signal to Noise 30 dB Tx/Rx CCQ 45/55% At this moment, the link of SU to AP is still quite good and the througput is between 1 - 3 Mbps average. how did u calculated the throughput of AP and SU.?
by wireless12
Fri Mar 06, 2009 12:11 pm
Forum: General
Topic: winbox login
Replies: 6
Views: 1022

Re: winbox login

thxx normis

oh i c...if it is then its very dangerous to do that.. bec we hav to alter in mikrotik then and there...is there no other way to dissapear and access it in the time of need.

thxx
by wireless12
Fri Mar 06, 2009 11:45 am
Forum: General
Topic: winbox login
Replies: 6
Views: 1022

Re: winbox login

ok in the follwoing picture i want that mikrotik in red circle dont aapear in winbox laoder.
by wireless12
Fri Mar 06, 2009 11:33 am
Forum: General
Topic: winbox login
Replies: 6
Views: 1022

winbox login

hello all.

is there any way to stop/restrict/hide specific mikrotik appearing in winbox...?

thxx
by wireless12
Thu Mar 05, 2009 2:34 pm
Forum: Wireless Networking
Topic: can't get Clients mac address ..
Replies: 3
Views: 1171

Re: can't get Clients mac address ..

u can see client mac address but only of one computer after ur AP9but u hav to use some different Acess point for client side,i.e which hav the facility of mac cloning, like micronet-GK, dlink etc. if u still wanna see the mac address of all computer after ur TP-link then u can aslo do that but for ...
by wireless12
Mon Feb 16, 2009 2:41 pm
Forum: Wireless Networking
Topic: Band 2GHZ-5MHz, 2GHz-10MHz
Replies: 15
Views: 8624

Re: Band 2GHZ-5MHz, 2GHz-10MHz

Now my question are : Why band 2GHz-10MHz/5MHz can not see/working with 2.4 GHz B/G ? what is the difference between 2GHz-10MHz/5MHz with 2.4GHz B/G ? Thx[/quote] hee heee heeeee.... i also wanna know the same thing but no one is giving right answer to ur question. why we see 2GHz-10MHz/5MHz along w...
by wireless12
Sat Feb 14, 2009 8:30 am
Forum: Wireless Networking
Topic: high ping time
Replies: 3
Views: 2989

Re: high ping time

hmm.
right words
by wireless12
Tue Feb 10, 2009 12:41 pm
Forum: Wireless Networking
Topic: Base station & CPE wireless connectivity diagram.plz paste
Replies: 0
Views: 681

Base station & CPE wireless connectivity diagram.plz paste

hello. We WISP install BASE station and we install CPE at customer's end. when we go and explain to user how it works we sometime use diagram to show wireless connectivity. do any one have such attractive diagram to tell customers how he would connect to our base station..we can convince the custome...
by wireless12
Thu Feb 05, 2009 10:46 am
Forum: Wireless Networking
Topic: How many Client connected to Mikrotik AP??
Replies: 13
Views: 8308

Re: How many Client connected to Mikrotik AP??

well running a WISP is always a challenge u miss it u loose it, situations changes every new day, "its not like install it and forget it". u shd be sound enough to understand the RF manipulation, implementation. its not about how many CPE can be associated wid a single AP, but the thing wh...
by wireless12
Thu Feb 05, 2009 10:24 am
Forum: Wireless Networking
Topic: making PABX local.
Replies: 1
Views: 867

making PABX local.

hello evryone. i hav got a project in hand. but i m not sure how to do it? actually an enterprise got 3 offices in same city. and each office got its own PABX. Office A (PABX) Office B (PABX) Office C (PABX) question: is it possible to interconnect ever PABX with each other, so that it work like one...
by wireless12
Wed Jan 28, 2009 11:31 am
Forum: Wireless Networking
Topic: RB411AH not available?
Replies: 5
Views: 1769

Re: RB411AH not available?

more frustration all around, even R5H also not available. Normis where are you? why don't mikrotik stop exporting 411A to INDIA and only import 411AH, i need it badly and no distributor have it although there are 4-5 distributor in INDIA, they don 't have R5H either.
by wireless12
Wed Jan 28, 2009 11:22 am
Forum: Wireless Networking
Topic: how to do it
Replies: 3
Views: 1067

Re: how to do it

no idea?
by wireless12
Tue Jan 27, 2009 2:59 pm
Forum: Wireless Networking
Topic: how to do it
Replies: 3
Views: 1067

how to do it

hello.
how to do the correct grounding of 411A. will the grounding of RB is sufficient for stability or we have to ground minipci as well separately.

is any snapshot available how to do grounding. pls show me.

thx n regards
by wireless12
Tue Jan 27, 2009 2:36 pm
Forum: Wireless Networking
Topic: is it relaible?
Replies: 13
Views: 2497

Re: is it relaible?

ok, after lot of discussion, i make up my mind to use 90 degree sector i will use 411A+R5H WITH EACH SECTOR. I will allow only 35 CPE on each sector. i will use NS5,PS5,or RB411 for CPE now: will the combination of 411A+R5H is sufficient for 35 CPE, i don't wanna use RB433 for some reasons. all cost...
by wireless12
Fri Jan 23, 2009 1:49 pm
Forum: Wireless Networking
Topic: is it relaible?
Replies: 13
Views: 2497

Re: is it relaible?

some people recommend 90 degree instead of 120 degree in 5ghz operations..why?
by wireless12
Wed Jan 21, 2009 1:02 pm
Forum: Wireless Networking
Topic: RB411AH not available?
Replies: 5
Views: 1769

RB411AH not available?

hello,

i need 411AH, but it is not available in India. when i asked my reseller he told me it is not imported in India, so why RB411AH not have been exported to India?


thx n regards.
by wireless12
Tue Jan 20, 2009 2:54 pm
Forum: Wireless Networking
Topic: is it relaible?
Replies: 13
Views: 2497

Re: is it relaible?

ok.. ths very useful informations from u people..no what u suggest for sactor antenna.. shd i use 90 degree or 120 degree. which is best in 5 ghz band.
by wireless12
Thu Jan 15, 2009 12:23 pm
Forum: Wireless Networking
Topic: Adaptive noise immunity - Client/AP and client mode
Replies: 9
Views: 20411

Re: Adaptive noise immunity - Client/AP and client mode

Actually on this particular tower it helped immensely. There were some Ubiquiti nanostation CPE's that were getting terrible CCQ (2-8) and Pthroughput was around 80k-200k. After changing to Client and AP ANI then CCQ jumped to (50-60) and Pthroughput was around 20000K. Also clients quit dropping co...
by wireless12
Sat Jan 10, 2009 12:46 pm
Forum: Wireless Networking
Topic: Card supportive configuration for long links
Replies: 10
Views: 2641

Re: Card supportive configuration for long links

hav u trried replacing antenna and pigtails, my suggestion is that u shd 1st give a try using XR2 card both sides.(2.4 GHZ just give a try for troubleshooting,) and if still u dont connect u shd install one section(3 meter) of mast each side..i m sure u will win it.. keep updating us.
by wireless12
Sat Jan 10, 2009 12:37 pm
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

You could try pointing antena upwards (look at the picture). http://seamcat.iprojects.dk/raw-attachment/wiki/Manual/Seamcat/ant_az_elev_setting/ant_az_elev_setting.PNG I've had a problem like yours when we were doing 26km link over lake, but i solved it pointing antenna upwards. I would also recomm...
by wireless12
Fri Jan 09, 2009 10:44 am
Forum: Wireless Networking
Topic: Card supportive configuration for long links
Replies: 10
Views: 2641

Re: Card supportive configuration for long links

wht is the height of the mast at both ends for the 65 km link.
by wireless12
Fri Jan 09, 2009 7:34 am
Forum: General
Topic: strange behaviour..how?
Replies: 4
Views: 1023

Re: strange behaviour..how?

ok finally i got it.. the RJ 45 socket of RB is not holding the RJ45 connector tightly. like when i just hold and push the RJ45 connector of cat5e cable into the RB Ethernet port...it works.. so i just tight it with adhesive tape.its working now.

thx u all for supporting n response.
by wireless12
Fri Jan 09, 2009 7:27 am
Forum: Wireless Networking
Topic: is it relaible?
Replies: 13
Views: 2497

Re: is it relaible?

so i means. that 5.8 is reliable but more challenges as far as LOS is concerned. right?
by wireless12
Thu Jan 08, 2009 6:51 am
Forum: General
Topic: strange behaviour..how?
Replies: 4
Views: 1023

Re: strange behaviour..how?

yes i hav changed POE but no results.
by wireless12
Wed Jan 07, 2009 4:32 pm
Forum: General
Topic: strange behaviour..how?
Replies: 4
Views: 1023

strange behaviour..how?

Dear frds. I came through a strange experience 1st time ever with mikrotik. i have got a point to point wireless link..suddenly this link went down. after doing a troubleshooting i noticed that one mikrotik was not working ( no power, no activity, no beep sound). then i took RB out of the box and gi...
by wireless12
Tue Jan 06, 2009 1:59 pm
Forum: Wireless Networking
Topic: is it relaible?
Replies: 13
Views: 2497

is it relaible?

hello frds. For last 3-4 years i m delivering internet as a WISP in pure 2.4 ghz, i never used 5.7, or 5.8 ghz to deliver internet. to my customers.(but i hav 3-4 PTP links on 5.8 ghz) , NOW, as 2.4 ghz is getting crowded day by day and there is less non-overlapping channels. i found difficult to ma...
by wireless12
Tue Jan 06, 2009 1:24 pm
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

I have about 20 PTMP 6-10km backbone - links. I've experienced a problem like yours few times , and almost always the solution was changing the pigtail. Nowadays it's hard to find a good pigtail. i think u are right..cost reduction also brings reduction in quality. but i hav changed the pigtails to...
by wireless12
Fri Jan 02, 2009 8:58 am
Forum: Wireless Networking
Topic: wireless PRI conection?
Replies: 0
Views: 542

wireless PRI conection?

helo frds..

is it possible to give Wireless PRI connection using mikrotik, how to do it?
by wireless12
Fri Jan 02, 2009 8:55 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

Yep, this is why you should never use cards without some type of load or antenna connected to them. thx @jwcn i m liite surprise to accpet that these card are now damged as u said. but i always test all my mikrotik before hooking the on the mast, numerous time i hav doen it, i never got my card dam...
by wireless12
Fri Jan 02, 2009 8:51 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

I think the cards are damaged. Try with CM9 for example. Low power cards.
how can these card are damaged i never expereinced such thing. i m using these R52 for a long time. even R52 is less then 100 mw, is it not lower enough as far as power is concerend...?
by wireless12
Thu Jan 01, 2009 8:58 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

hii, i would like to add one more thing.. before hooking up these units on mast.. i check them in my lab but wihout any external antenna,when i placed both mikrotik 10 mts away frm each other in my lab, singal were arround - 45 db, signal to noise was also good, and throught was good too..and imedia...
by wireless12
Thu Jan 01, 2009 8:53 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

Are you sure you have your grid antennas assembled correctly and the same at both ends? The feed horn in the center should be running to the the short sides. See my crude diagram below. The feed horn is in the center. |||| | ||||| = correct |||| - ||||| = wrong Both antennas the same polarity? Bad ...
by wireless12
Thu Jan 01, 2009 8:51 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

Re: OH..MY.....GOD!!!! what is happening?

5860? Are you sure the antennas are good for 5860?
ya i m almost sure antenna are good. for 5860
by wireless12
Wed Dec 31, 2008 9:14 am
Forum: Wireless Networking
Topic: wireless 5km p-t-p, why results are horrible?
Replies: 19
Views: 3770

wireless 5km p-t-p, why results are horrible?

helloo friends. i hav just made a wireless point to point of link 5 km , but the results are just horrible. but there is no ping timed out between them and the ping varies frm 1ms - 3 ms. Hardware use: 1. RB411+R52 + 26 dBi GRID ANTENNA ON BOTH SIDES 2. LINE OF SITE IS VERY VERY CLEAR( 80 FEET MAST ...
by wireless12
Wed Dec 31, 2008 8:51 am
Forum: Wireless Networking
Topic: which one is best?
Replies: 1
Views: 745

which one is best?

hello all.. which one is better 5.7 GHZ or 5.8 GHZ and why? a) For point to multipoint wireless connections upto 3-15 kms b) For point to point wireless links of distance between 4-18 kms. kept in mind that there is very very less interference on both 5.7 & 5.8 in my physical area. thx & reg...
by wireless12
Wed Dec 24, 2008 7:29 am
Forum: General
Topic: This Forum NOT with MS IE ?
Replies: 12
Views: 2281

Re: This Forum NOT with MS IE ?

really...its now working with even in IE-6, but note for last 5-6 days.
by wireless12
Mon Dec 22, 2008 10:52 am
Forum: General
Topic: This Forum NOT with MS IE ?
Replies: 12
Views: 2281

Re: This Forum NOT with MS IE ?

ok..i will download I.E 7 and lets see wht happend..i will report back.
by wireless12
Mon Dec 22, 2008 9:44 am
Forum: General
Topic: This Forum NOT with MS IE ?
Replies: 12
Views: 2281

Re: This Forum NOT with MS IE ?

yaa..i m facin the same prob too..www.forum.mikrotik.is not opening in I.E 6 . its is in distorted format when i open it in I.E. but i can smoothly login in mozilla..huhh. strange...
by wireless12
Wed Dec 17, 2008 10:10 am
Forum: General
Topic: how to rest?
Replies: 4
Views: 1130

Re: how to rest?

thx a lot @normis..i would be very nice of u if u could also provide me a snapshot..i dont wanna do any mistake, every piece of mikrotik i own is a treasure for me.i dont to loose a single of them.

thxxxxx
by wireless12
Wed Dec 17, 2008 9:40 am
Forum: General
Topic: how to rest?
Replies: 4
Views: 1130

how to rest?

hello frds..
how to reset both RB133C & RB133 for default factory settings not by using terminal command(software reset). but by hardware manually reset. if possible can i have the snapshot of all this stuff..

thx n regard
by wireless12
Wed Dec 17, 2008 8:56 am
Forum: RouterBOARD hardware
Topic: New RB models?
Replies: 14
Views: 4359

Re: New RB models?

can you please help me in brand making? Ex: like the name of the radio is to be hidden and in top of the winbox, in place of mikrotik something else to be written. Can we somthing regarding this issue. Second in new terminal, if I want to replace mikrotik.com and want to write abc.com in place of t...
by wireless12
Wed Dec 17, 2008 8:51 am
Forum: Wireless Networking
Topic: WISP Starter
Replies: 7
Views: 1999

Re: WISP Starter

hi.. ya ths a big prob...actually lot of gear are presents in market today. some time we are very very confused wht to use wht not to use....but i believe..that...we shd find better among the cheapest...i mean we can make a list of the cheapest brand and then decide for the best among them..i think ...
by wireless12
Wed Dec 17, 2008 8:43 am
Forum: Wireless Networking
Topic: third party CPE ?
Replies: 6
Views: 2233

third party CPE ?

hello.. a wisp always feel concern about CPE (low cost yet optimum) we can install good base station by adding sectors to Mikrotik AP and good wireless card. but having such a powerful base station if we fail to install correct CPE. moreover its not possible to install mikrotik at all clients. so pl...
by wireless12
Fri Dec 12, 2008 8:52 am
Forum: Wireless Networking
Topic: CPE, share ur thoughts
Replies: 7
Views: 2350

CPE, share ur thoughts

hello all.. generally we WISP got two kind of coustomers to dealth with: 1. Domestic or home users. 2. Corporate or enterprise users. Now, the enterprise users dont mind to pay for costly CPE installations..bec there business rely on the internet and they need stable links but the picture is not sam...
by wireless12
Thu Dec 11, 2008 6:51 am
Forum: Wireless Networking
Topic: Sector antenna, share ur thoughts
Replies: 4
Views: 1269

Re: Sector antenna, share ur thoughts

plz also share ur thoughts on the dimensions of a good sector, thickness, vertical length, horizontal width, etc..how these things effects the performance of a sector.
by wireless12
Wed Dec 10, 2008 9:41 am
Forum: Beginner Basics
Topic: what is the solution?
Replies: 8
Views: 2177

Re: what is the solution?

i did mention teh client hardware.. mostly they are dlink DWL-2100 Ap, and longest distnace is approx 1.5km all clinets are not more then 1.5 km away frm the sector.
by wireless12
Wed Dec 10, 2008 9:36 am
Forum: Wireless Networking
Topic: Sector antenna, share ur thoughts
Replies: 4
Views: 1269

Sector antenna, share ur thoughts

hello guys. most of 2.4 GHZ WISP use sector antenna on their tower to deliver internet to the wireless coustomers. what are the points shd be kept in mind before we purchse sector antenna for our tower:- (A.) like how many sectors we shd purchse to cover 360 degree(shd it be 90 deg, or 120 deg)? (B....
by wireless12
Mon Dec 08, 2008 11:37 am
Forum: RouterBOARD hardware
Topic: its hard to choose
Replies: 2
Views: 1114

Re: its hard to choose

ohhhhh, i thin no one else had use alfa mini pci cards.
by wireless12
Thu Dec 04, 2008 10:31 am
Forum: RouterBOARD hardware
Topic: its hard to choose
Replies: 2
Views: 1114

its hard to choose

hello frds. 1. did anyone use Alfa network mini pci cards and which model of Alfa is good.? 2.can i use ALFA wireless cards with RB411A/AH without issues.? 3.which wireless mini pci card will be good to work in point to mulitpoint operations for connecting 25-28 simultaneous users. in 2.4 ghz band. ...
by wireless12
Thu Nov 27, 2008 11:24 am
Forum: RouterBOARD hardware
Topic: DISTNACE?
Replies: 2
Views: 1095

Re: DISTNACE?

hummmmm, i think this question is very typical one...no replies yet.
by wireless12
Thu Nov 27, 2008 7:52 am
Forum: RouterBOARD hardware
Topic: DISTNACE?
Replies: 2
Views: 1095

DISTNACE?

HELLO

How far(air distance) a Point to Point link go in 5.8 frequency for solid n stable link
How far(air distance) a Point to MultiPoint link go if i use secor in 5.8 frequency?
by wireless12
Fri Nov 21, 2008 11:33 am
Forum: RouterBOARD hardware
Topic: usefull question.
Replies: 3
Views: 1131

Re: usefull question.

thx normis, but how many versions avialable in version 3 sereies till now..?
by wireless12
Fri Nov 21, 2008 10:44 am
Forum: RouterBOARD hardware
Topic: usefull question.
Replies: 3
Views: 1131

usefull question.

hello... how many version are realsed in version 3 series of ROS. till now and which ROS version will be best out of best to allow wireless clients to use high speed internet.? experts suggestions would be very usefull to me and to other miktotik users. Note:- all wireless clients would hav netgear ...
by wireless12
Thu Nov 20, 2008 9:54 am
Forum: RouterBOARD hardware
Topic: which one will be the best
Replies: 1
Views: 994

which one will be the best

hiii. i hav got one 120 sector antenna almost 32 wirleless would be conncted to it when i hook up on mast. i hav to choose From these: Uqibity Nanostation-2 or PowerStation-2 or Mikrotik 411AH Question:- 1. Which Radio out of above three i shd use along with sector for decent results & why Note-...
by wireless12
Mon Nov 03, 2008 11:11 am
Forum: RouterBOARD hardware
Topic: what happend to extra channels?
Replies: 5
Views: 2525

Re: what happend to extra channels?

this soft ID: ph6y-3tt doesn't have extra channel license.
thxxx@ 'uldis"....oh i c...then wht is the solution to this prob? without any extra expenditures..if i upgrade to higher version of ROS then could i get extra channels.

regards
wireless12
by wireless12
Mon Nov 03, 2008 6:52 am
Forum: RouterBOARD hardware
Topic: what happend to extra channels?
Replies: 5
Views: 2525

Re: what happend to extra channels?

ohhhhhhhh is this question is very difficult that no one can able to reply...
by wireless12
Sat Nov 01, 2008 11:05 am
Forum: RouterBOARD hardware
Topic: what happend to extra channels?
Replies: 5
Views: 2525

what happend to extra channels?

hello....

i hav two RB133C an hav licnece level 4 on both them. but one hav got ROS version 2.9.38 and the second hav got ROS version 2.9.34. below are the snapshot of these two RB
question:-
why i am not able to see extrachannels in RB which hav got ROS version 2.9.34 ????
by wireless12
Fri Oct 24, 2008 9:55 am
Forum: Beginner Basics
Topic: very basic question but the most important one
Replies: 1
Views: 1162

Re: very basic question but the most important one

oooooooooops.no reply,no help?
by wireless12
Thu Oct 23, 2008 1:41 pm
Forum: Beginner Basics
Topic: very basic question but the most important one
Replies: 1
Views: 1162

very basic question but the most important one

hiii...i hav RB-411AH, i want to use it to distribute internet to 25 wireless users. all wireless client will be issued a local static ip for thier computer's NIC .(there is no DHCP server behind this RB-411AH, a Gateway server is used to distribute internet). Now to configure it, i hav connected it...
by wireless12
Mon Oct 20, 2008 8:53 am
Forum: Wireless Networking
Topic: basics of measuring throughput, dont ignore it plz..
Replies: 2
Views: 1419

Re: basics of measuring throughput, dont ignore it plz..

thxxx. guzzz.

some more thoughts and opinion ???? anyone else?.
by wireless12
Sun Oct 19, 2008 4:40 pm
Forum: Wireless Networking
Topic: basics of measuring throughput, dont ignore it plz..
Replies: 2
Views: 1419

basics of measuring throughput, dont ignore it plz..

hello.. sorry, i m pasting a very stupid question..but i believe if few exprienced RF and network Engeeniers explain and discuss the basic of "throughput checking" it would greatly help learners and will root off many wrong explanantion of THROUGHPUT. suppose i hav setup a PTP link which l...
by wireless12
Thu Oct 16, 2008 12:06 pm
Forum: Beginner Basics
Topic: Mac filtering / restrication on wireless network
Replies: 13
Views: 2972

Re: Mac filtering / restrication on wireless network

do hav yahoo messenger.? and yahoo messenger ID?
by wireless12
Thu Oct 16, 2008 11:57 am
Forum: Beginner Basics
Topic: Mac filtering / restrication on wireless network
Replies: 13
Views: 2972

Re: Mac filtering / restrication on wireless network

are u frm KOSI which is near to MATHURA
yes who is this
well are u a ISP and are u attached wid sify..
by wireless12
Thu Oct 16, 2008 11:02 am
Forum: RouterBOARD hardware
Topic: Best Mikrotik configuration
Replies: 4
Views: 3622

Re: Best Mikrotik configuration

where is ANI in advance tab...i cant see the premabe type but i m not abl e too see adoptive noise immunity. i m usiing ROS 2.9.38
by wireless12
Thu Oct 16, 2008 10:04 am
Forum: Beginner Basics
Topic: Mac filtering / restrication on wireless network
Replies: 13
Views: 2972

Re: Mac filtering / restrication on wireless network

are u frm KOSI which is near to MATHURA
by wireless12
Thu Oct 16, 2008 10:02 am
Forum: Wireless Networking
Topic: can mikrotik stop this?
Replies: 5
Views: 2562

Re: can mikrotik stop this?

dear @bushy @ netrat sorry but i dont think that this will solve my problem actaully i want that the traffic of one link should not clash with the traffic of any other link. Secondly i m not usling any DHCP server or PPOE server. i m using a gateway server by which i issue fix local IP to my cleints...
by wireless12
Mon Oct 13, 2008 3:11 pm
Forum: Wireless Networking
Topic: can mikrotik stop this?
Replies: 5
Views: 2562

can mikrotik stop this?

hello all. i have got three PTP link in the following manner:- LNK1: RB411AH -----RB411AH--SWITCH---OMNI(A)[SENAO 2611+]---10 wireless internet clinets LNK2: RB411AH -----RB411AH--SWITCH---OMNI(B)[RB433]---16 wireless internet clinets LNK3: RB411AH -----RB411AH--SWITCH---OMNI(C)[RB433]---20 wireless...
by wireless12
Tue Sep 30, 2008 12:31 pm
Forum: Wireless Networking
Topic: what to do?
Replies: 3
Views: 1089

Re: what to do?

ahhhhhhhh wow "normis"

its like dream comes true..i hav just posted this thread and my god..i got a fast response, and importanly by you..i m overwhelmed..

anyways..i just simply use parabolic 5 ghz grid antenna.
by wireless12
Tue Sep 30, 2008 12:18 pm
Forum: Wireless Networking
Topic: what to do?
Replies: 3
Views: 1089

what to do?

hii all i hav got a job in my hand..i hav got a contract to create a point to point wirless link(5GHZ) Demands : 1. the wirless link should hav a troughput of 15-20 mpbs. Challenges and Limitations : 1.The air distnace between two link is 8 Km. 2.I can only use RB433/433AH. i can use R52H, seano 860...
by wireless12
Sun Sep 28, 2008 12:48 pm
Forum: Wireless Networking
Topic: vedio conferencing using mikrotik
Replies: 4
Views: 1676

Re: vedio conferencing using mikrotik

thxx jack..

but i hav siad we hav to do vedio conferencing without "Internet" and the solution i.e. 'Ekiga' is a internet needy conferencing tool...i m sorry i m not very much awaring of vedio conferencing..plz help me..this project is very crutial for my future..
by wireless12
Sat Sep 27, 2008 4:59 pm
Forum: Wireless Networking
Topic: vedio conferencing using mikrotik
Replies: 4
Views: 1676

Re: vedio conferencing using mikrotik

knock knock...no replies yet.
by wireless12
Sat Sep 27, 2008 11:27 am
Forum: Wireless Networking
Topic: vedio conferencing using mikrotik
Replies: 4
Views: 1676

vedio conferencing using mikrotik

HELLO is it possible to do vedio conferencing without using internet with the help of mikrotik..at a distnace of 12 Km Site(A)-----"Mikrotik"<=============>Mikrotik------Site(B) NOTE: 1. air distance between site(A) & site(B) = 12 km 2. Also there are 34 CCTV cameras at site(A), can we...
by wireless12
Wed Sep 10, 2008 2:42 pm
Forum: Wireless Networking
Topic: mini pci support for 411/411a
Replies: 5
Views: 2186

Re: mini pci support for 411/411a

A NEW QUESTION hello...i got a wisp network where:- RB 411A + R52 + 16 dbi (120 sector) can it handle 25 simulatenous users mostly online all the time,where most users have 128 kbps and 256 kbps unlimited ineternet connection. all clients are not more then 3 km away. i will not allowed more then 60...
by wireless12
Sat Aug 16, 2008 6:45 am
Forum: Wireless Networking
Topic: which is the most stable mini pci card ever for RB
Replies: 5
Views: 2063

Re: which is the most stable mini pci card ever for RB

but some people state that few cards give thier best in point to point applications and not in Point to multipoint .while few cards work great in point to multipoint applications but they show retarted performnce when we configure them for PTP applications....is it so?
by wireless12
Fri Aug 15, 2008 8:59 pm
Forum: Wireless Networking
Topic: which is the most stable mini pci card ever for RB
Replies: 5
Views: 2063

which is the most stable mini pci card ever for RB

hii..

1. which mini pci card is best performer with RB..?
2. which mini pci card is most stable ever in 2.4 ghz..?
3. which mini pci card is most stable ever in 5 GHZ ...?
4. which mini pci is stable and rock solid performer for point to multipoint internet connections.(2.4 ghz)...?
by wireless12
Thu Jul 24, 2008 8:42 am
Forum: Wireless Networking
Topic: GRID ANTENNA SELCTION FOR POINT TO POINT LINK
Replies: 1
Views: 1451

GRID ANTENNA SELCTION FOR POINT TO POINT LINK

Hiii, 1. there are many grid antenna available in the market for WISP. 2. every vendor declare that there grid antenna are best. 3. what are the qualities of a good grid antenna...how to choose a correct grid antenna for a reliable PTP link of 15-30 km. 4. how can we check that our purchased grid an...
by wireless12
Sat Jul 19, 2008 7:02 am
Forum: Wireless Networking
Topic: PERFORMANCE OF CROSSROADS
Replies: 5
Views: 1795

Re: PERFORMANCE OF CROSSROADS

I dont think is good to use on ptp link...better use RB411 because is more powerful, Crossroad have only 180Mhz.
ok...but for shorter distance of 4-5 km,can we use it. for point to point link?
by wireless12
Fri Jul 18, 2008 9:18 am
Forum: Wireless Networking
Topic: PERFORMANCE OF CROSSROADS
Replies: 5
Views: 1795

PERFORMANCE OF CROSSROADS

hiii,
did anyone here who have tested the performance and reliability of Mikrotik "CROSSROADS" ACCESS POINT..are they really good for point to point link of 15 km (air distance)..how much throughtput? wht abt the stability of this product..

thxx....
by wireless12
Sun Jun 22, 2008 6:44 pm
Forum: Wireless Networking
Topic: mini pci support for 411/411a
Replies: 5
Views: 2186

mini pci support for 411/411a

hello evryone,

can RB411 or 411A support R52H(350mw),or sr2(400mw).
i mean can we use a high power minipci for RB411 or 411A.
plzzz help me to sort out this issue.
by wireless12
Sun May 11, 2008 6:17 am
Forum: Wireless Networking
Topic: wht ip range shd i give to my clients AP
Replies: 3
Views: 1516

Re: wht ip range shd i give to my clients AP

thxxx jwcn..
u are really wonderful and kind person. u always help me when no one replies...
thxxxxxxx a lot..