Community discussions

MUM Europe 2020

Search found 80 matches

by Madrox
Tue May 08, 2012 10:51 am
Forum: General
Topic: RB1000 STOPS!
Replies: 0
Views: 320

RB1000 STOPS!

My RB1000 main GW stops, can not connect to the console or any thing.
If i reboot i still not working, but if i leave the power off in a houre or two. its starts upp again and run like normal.
then after a month or two its hangs again.

Any one have this problem?
by Madrox
Thu Mar 22, 2012 3:26 am
Forum: General
Topic: Help! Ethernet port stops responding on live border router!
Replies: 3
Views: 1017

Re: Help! Ethernet port stops responding on live border rout

did u find the problem? got the same now on rb1000 i just stop working. but i have also problem to boot it up agian. it just hang do not get dobbel pip sound. in the lab i just plugd it in the power and after 2 hours i did get full bootup. but no errors.

Any one?
by Madrox
Fri Dec 02, 2011 9:27 am
Forum: General
Topic: how to route 2 subnets and 1 local subnet
Replies: 0
Views: 373

how to route 2 subnets and 1 local subnet

Hello

How do we route 2 publics subnet from 2 difrents isp, and one local one that is use on all the mikrotik units?

Today i have tird to router mark the 2 public ones, but then the local one do not work right.
by Madrox
Tue Jun 14, 2011 11:22 pm
Forum: General
Topic: Urgent help, unstabel PtP link and Mtp link, going crazy
Replies: 8
Views: 1565

Re: Urgent help, unstabel PtP link and Mtp link, going crazy

Do you mean set manual data rate?, have try whit one inteface on nv2 but the cpu go high and then i got the ping problem again. never use nv2, try to read the manual but dint find any thing to keep the cpu low. + its stand on the v5 of router os that x86 is not supportet by nv2
by Madrox
Fri Jun 10, 2011 3:41 pm
Forum: General
Topic: Urgent help, unstabel PtP link and Mtp link, going crazy
Replies: 8
Views: 1565

Re: Urgent help, unstabel PtP link and Mtp link, going crazy

I have upgrade to 5.4 on every clients and alle the routeros in the network and one the ptp link i can run 30mbps / 30 mbps whit great ccq. this is was i have figour out to now, i have change all coax cables, every nettwork card and pci-pcim card. did take every thing apart, and connet one and one c...
by Madrox
Tue Jun 07, 2011 4:58 pm
Forum: General
Topic: Urgent help, unstabel PtP link and Mtp link, going crazy
Replies: 8
Views: 1565

Re: Urgent help, unstabel PtP link and Mtp link, going crazy

system: uptime: 4m11s version: 5.4 free-memory: 1012652KiB total-memory: 1035012KiB cpu: Intel(R) cpu-count: 2 cpu-frequency: 1866MHz cpu-load: 5% free-hdd-space: 307481920KiB total-hdd-space: 307647764KiB write-sect-since-reboot: 1618 write-sect-total: 1618 architecture-name: x86 board-name: x86 pl...
by Madrox
Tue Jun 07, 2011 4:55 pm
Forum: General
Topic: Urgent help, unstabel PtP link and Mtp link, going crazy
Replies: 8
Views: 1565

Re: Urgent help, unstabel PtP link and Mtp link, going crazy

AP 3 wirless interface: 0 R name="Wlan_201" mtu=1500 mac-address=00:0C:42:18:E0:72 arp=enabled disable-running-check=no interface-type=Atheros AR5413 radio-name="ggnetfjell" mode=ap-bridge ssid="ggnetfjell" area="" frequency-mode=manual-txpower country=norway antenna-gain=0 frequency=5765 band=5ghz-...
by Madrox
Tue Jun 07, 2011 3:06 am
Forum: General
Topic: Urgent help, unstabel PtP link and Mtp link, going crazy
Replies: 8
Views: 1565

Urgent help, unstabel PtP link and Mtp link, going crazy

2 weeks ago we started to have big problem to one of oure ap. ping bettwen 400-999 ms and timouts. we have tryd ever thing and cant get it to gether. This link is a rb600 to x86 system the x86 is our ap and ptp the rb600 deliver the network to the ap from 3 km away. singal is -65 -65 ccq is stable. ...
by Madrox
Sat Sep 11, 2010 3:20 am
Forum: General
Topic: Problems with DNS in Version 4.x
Replies: 47
Views: 7727

Re: Problems with DNS in Version 4.x

Hey
I did have this problem whit my rb1000, think i figuret out that it stops when it get to mutch reqest.
But now i run servers bind9. and the problem was gone.
by Madrox
Fri Sep 03, 2010 12:08 am
Forum: General
Topic: Urgent Help Needed
Replies: 3
Views: 702

Re: Urgent Help Needed

if it urgent you have also to remember to post config of your boxes, it can be many resons
by Madrox
Sat Aug 28, 2010 12:20 am
Forum: General
Topic: How have 2 pppoe router on the client side? whitout tunnels
Replies: 3
Views: 510

Re: How have 2 pppoe router on the client side? whitout tunn

yes iknow that, but if i set it on station mode, and brigde wlan whit eth1 og eth2 it will not work?. so is it any other whys do do it, whitout creating wds? or manual make eoip tunnels to every clients that have more then one pppoe tunnel?
by Madrox
Fri Aug 27, 2010 12:39 pm
Forum: General
Topic: How have 2 pppoe router on the client side? whitout tunnels
Replies: 3
Views: 510

How have 2 pppoe router on the client side? whitout tunnels

Hello, when we install to or clients we use statios psubrigde, and then a wirless router.
How can we do it, when we have to routers? iknow i just can make tunnel, but this will be messi at the end. and wds it out?
Is it som other ways?
by Madrox
Sun Apr 18, 2010 8:37 pm
Forum: General
Topic: Redirect traffic to Squid ( Linux )
Replies: 30
Views: 88398

Re: Redirect traffic to Squid ( Linux )

U can install squid whit Tproxy and set the squid as brigde this work great but you have use 2 NIC and if the power of squid goes you have to unplugg squid. as router-squid-switch-clients. The good thing is that u do not have to change any thing to the network. Im workin now whit triangel routing so...
by Madrox
Wed Apr 14, 2010 9:37 pm
Forum: General
Topic: Mikrotik, squid and tproxy
Replies: 34
Views: 13811

Re: Mikrotik, squid and tproxy

edit. bump
by Madrox
Sun Apr 11, 2010 1:08 am
Forum: General
Topic: Mikrotik, squid and tproxy
Replies: 34
Views: 13811

Mikrotik, squid and tproxy

Hello, I have a problem making an trancparent proxy whit tproxy working whit mikrotik. Have read mutch about how to do it, but can't get it to work. Everybody use the proxy as a brigde, but i se this ass one more point that can make everything to go down. So what i want is to use it on core switch, ...
by Madrox
Mon Feb 22, 2010 9:34 am
Forum: General
Topic: How to diagnose(repair) Mikrotik router (it doesnt work)
Replies: 3
Views: 1880

Re: How to diagnose(repair) Mikrotik router (it doesnt work)

connect the serial cable to the computer and mikrotik and use terminal software, se whats its says when it boots. then you can se if the can be a boot error, or maby you can try to reset RB.. if not, maby time to buy a new one
by Madrox
Tue Feb 02, 2010 9:47 am
Forum: General
Topic: PPPOE server and Mikrotik-Rate-Limit
Replies: 4
Views: 1113

Re: PPPOE server and Mikrotik-Rate-Limit

Im looking for this to, so that my local part of the network get higher speed. use pppoe rate on out from our network.
by Madrox
Sun Jan 31, 2010 3:17 am
Forum: General
Topic: BW managing for WISP
Replies: 20
Views: 3308

Re: BW managing for WISP

The best why to learn is to read, and explore the many facilities of RouterOS. But to get you on track, make "lab" testing area. take you router innside make small network. Ex: Add simple queue Open terminal put this in / queue simple add name="Local" target-addresses=192.168.0.0/24 dst-address=0.0....
by Madrox
Sun Jan 24, 2010 9:37 pm
Forum: General
Topic: BW managing for WISP
Replies: 20
Views: 3308

Re: BW managing for WISP

use the mikrotik`s wiki page
http://wiki.mikrotik.com/ mutch good info and configs.
http://wiki.mikrotik.com/wiki/Bandwidth ... and_Queues
esay why can be just to use simple queues
by Madrox
Sun Jan 24, 2010 6:27 pm
Forum: General
Topic: asus wl530g connect to pppoe chap fail
Replies: 1
Views: 687

Re: asus wl530g connect to pppoe chap fail

Did get in to work, was a bug on the asus
by Madrox
Sun Jan 24, 2010 6:07 pm
Forum: General
Topic: asus wl530g connect to pppoe chap fail
Replies: 1
Views: 687

asus wl530g connect to pppoe chap fail

i got error message when i try to connect a asus wl530g to pppoe, asus: Jan 1 01:02:03 pppd[60]: Starting link Jan 1 01:02:03 pppd[60]: PPP session is 11 Jan 1 01:02:03 pppd[60]: Connect: ppp0 -> eth0 Jan 1 01:02:03 pppd[60]: CHAP digest 0x5 requested but not available Jan 1 01:02:03 pppd[60]: Exit....
by Madrox
Sun Jan 24, 2010 1:26 am
Forum: General
Topic: PPPoe to clients side
Replies: 4
Views: 799

Re: PPPoe to clients side

It was that i meen that then they only can have one unit, on there side. Bad English :D
Thx very mutch again.
by Madrox
Sat Jan 23, 2010 10:49 pm
Forum: General
Topic: PPPoe to clients side
Replies: 4
Views: 799

Re: PPPoe to clients side

station-pseudobridge will also make brigde auto, not exstra configurasjon on the client or ap side? Have long time seek after a sulusion as the pseudobrigde, this will also help me the places where i not using the pppoe. so i have control over how many that are connected. so pepol not just connect a...
by Madrox
Sat Jan 23, 2010 9:48 pm
Forum: Wireless Networking
Topic: wireless step back
Replies: 0
Views: 361

wireless step back

Poor wirless performence from 4.0... Its not first time this have been posted? But its it som answers? Or are just every body drunk when i install links? Or is it som setups in 4.0 that is new? My reading is singal streng -74/-65 ccq: 93/94 singal to noise:28 But the rate is crazy it stable tx 54 an...
by Madrox
Sat Jan 23, 2010 9:34 pm
Forum: General
Topic: PPPoe to clients side
Replies: 4
Views: 799

PPPoe to clients side

This is my setup rb600 AP .-wlan-. rb433 antenna client .-ethernet-. router client How can i bridge the wlan and ethernet so the client router can accsess the PPPoE server. I understand that i can use WDS, but will not WDS limits the speed? and making alots of tunnels is just making a mess on ap. is...
by Madrox
Mon Dec 14, 2009 11:36 am
Forum: Wireless Networking
Topic: Unstalbe AP/clients
Replies: 3
Views: 2963

Unstalbe AP/clients

Hello. I got issu on my ap, clients stands 48Mbps/48Mbps but go back to 48Mbps/6Mbps often and then up to 48Mbps/48Mbps agein. When i look at the clients it standing 48Mbps/48Mbps not dropping. And the ccq is not good its 80/85 % but dropp down to 70/70 % and can ho up to 80/97% but look like the tx...
by Madrox
Thu Nov 12, 2009 4:00 pm
Forum: Forwarding Protocols
Topic: route /28 netmask
Replies: 10
Views: 2776

Re: route /28 netmask

Did get it to work, wrong on cable bettwen isp and me. strange it was new cable.
by Madrox
Wed Nov 11, 2009 8:55 pm
Forum: Forwarding Protocols
Topic: route /28 netmask
Replies: 10
Views: 2776

Re: route /28 netmask

What i want is to route this addrese to my network. so my clients can get public ips.
but i cant get it to work?
by Madrox
Wed Nov 11, 2009 8:14 pm
Forum: Forwarding Protocols
Topic: route /28 netmask
Replies: 10
Views: 2776

Re: route /28 netmask

Hey, thx for answare but im littel un secure. When you say place the /28 on my internal interface? eks xx.xx.xx.208/28 on the ether2 as ipaddrese or on the route? Will post my config. 10.xxx.3.202/30 this is the link addresse 10.xxx.3.201/30 is the provider addresse 62.xx.32.208/28 is my ipnet 192.1...
by Madrox
Wed Nov 11, 2009 6:53 pm
Forum: Forwarding Protocols
Topic: route /28 netmask
Replies: 10
Views: 2776

Re: route /28 netmask

Then 99% of this forum is not about ROS it self.
If you look at the forum you will get that everyboody ask about BGP, OSFP, MPLS, MME, RIP, HWMPplus, DHCP, Wirless: about cables and anntena etc!!! All this is things that you can do whit ROS.
by Madrox
Wed Nov 11, 2009 4:48 pm
Forum: Forwarding Protocols
Topic: route /28 netmask
Replies: 10
Views: 2776

Re: route /28 netmask

anybody? that now the answere?
by Madrox
Wed Nov 11, 2009 12:01 pm
Forum: Forwarding Protocols
Topic: route /28 netmask
Replies: 10
Views: 2776

route /28 netmask

Hello? i got /28 from my isp, but i cant understand how to use it.
the ips are route to 10.xxx.10.202/30, and 10.xxx.10.201/30 is my gateway as isp.
and my ips xx.xx.32.208/28
What now?
by Madrox
Sun Oct 11, 2009 9:09 pm
Forum: Forwarding Protocols
Topic: Pleas help me understand :)
Replies: 1
Views: 731

Pleas help me understand :)

Hello, the images is my network. have susesfull use set up ap but never done just brigde ptp links. and im littel confust. do i have to use wds, eoip or mpls when i have brigde mode? i know when i have set up ap-brigde have to use ex, wds. then i have read that mpls is the best thing to setup. how t...
by Madrox
Fri Oct 02, 2009 10:23 pm
Forum: General
Topic: PPPoE server where to place it?
Replies: 6
Views: 733

Re: PPPoE server where to place it?

What i want is to have open for clients between them. and limit out to the world.
how can i do this then? have never setup pppoe server before, but its shoud go esay, is it any posibal to send all trafikk from my ip subnet whit out pppoe tunnel but still use pppoe ip that is delivertd from pppoe?
by Madrox
Fri Oct 02, 2009 8:13 am
Forum: General
Topic: PPPoE server where to place it?
Replies: 6
Views: 733

Re: PPPoE server where to place it?

thanx to you :) well what is my situation then? :P the esay way have to be after the core switch for me, but i was also thing how will the capasty work, do meen PPPoE makes a tunnel from client to the core switch then. or will it still send the pack thats is going from one client to other just over ...
by Madrox
Wed Sep 30, 2009 8:20 pm
Forum: General
Topic: PPPoE server where to place it?
Replies: 6
Views: 733

Re: PPPoE server where to place it?

wow? what happen to this forum?. before pepole use to help othere on this forum.
this is my second post this month that not have been answerd.
And a basic thing like PPPoE server shoud be pepole there out that have a view/idea about how to place it.
by Madrox
Tue Sep 29, 2009 1:02 pm
Forum: General
Topic: PPPoE server where to place it?
Replies: 6
Views: 733

PPPoE server where to place it?

Where shoud we have the PPPoE server?
on every AP, or can we have it after the on the main switch?.

.....................- DNS
.....................- PPPoE server
---Gateway-Switch----------Ptp1 ------- ap
.....................- radius
.....................----------PtP2 --------ap
by Madrox
Tue Sep 22, 2009 10:17 pm
Forum: General
Topic: Wireless N standard, beta, and criticism
Replies: 0
Views: 359

Wireless N standard, beta, and criticism

As i understand pleas corect me if im wrong, that r52n and r2n is not working on 3.xx Just on 4.0 that is at this moment only beta, understand that N is new future and its solud be tested and the best whey to do this is by new ver, but on first this shoud have been listed in www.routerboard.com site...
by Madrox
Thu Sep 17, 2009 8:31 pm
Forum: Wireless Networking
Topic: construc Wireless network, Open for any tip.
Replies: 0
Views: 362

construc Wireless network, Open for any tip.

http://forum.mikrotik.com/download/file.php?mode=view&id=2753&sid=a5c48c24b21d4fd34cfc00ee43812cf7 Its whas bad images, so i will try to explain. After our provider whe have a RB1000 gateway that then go to a Mysql-DNS server and to rb600 to send the signal over to site 2 and 3 and client anntenna ...
by Madrox
Wed Aug 26, 2009 8:17 pm
Forum: Wireless Networking
Topic: 2 x 29 db antenna is it to close?
Replies: 3
Views: 810

2 x 29 db antenna is it to close?

Every day we are toking about how long we can get, but is it posibal to be to close for big anntennas? Is i think wirless cards more mw more noise? is this true? this is my senerio i have 2 29 dbi antennas that are just 0.280 km from etche other, whit 350 mw cards. is i better to have 65 mw? are sma...
by Madrox
Fri Jan 02, 2009 11:08 am
Forum: General
Topic: Graphing each host
Replies: 4
Views: 836

Re: Graphing each host

Im doing Simple queue and queue tree whit mangle,
post the simple queue conf, queue tree conf
by Madrox
Wed Dec 31, 2008 5:23 am
Forum: General
Topic: nat problem newby
Replies: 6
Views: 826

Re: nat problem newby

chain=dstnat
action=dst-nat
to-addresses=<-- ipaddr to you computer -->
to-ports=<-- port that you want -->
dst-address=<-- Your public ipaddr -->
dst-port=<-- port that you want -->
protocol=<-- your protocol -->
by Madrox
Wed Dec 31, 2008 5:14 am
Forum: General
Topic: Graphing each host
Replies: 4
Views: 836

Re: Graphing each host

Did have this problem before.
One of the v3 versions they change Queue Type to
default-small as standard i think, try to change to default.
that did work for me.
Hope its work ;)
by Madrox
Fri Sep 12, 2008 4:47 pm
Forum: General
Topic: Help! PPPOE clients
Replies: 6
Views: 1103

Re: Help! PPPOE clients

then the user will get local ip, not a public one, then i have to chage the rules on the firewall, ETC
by Madrox
Fri Sep 12, 2008 1:04 am
Forum: General
Topic: Help! PPPOE clients
Replies: 6
Views: 1103

Re: Help! PPPOE clients

bump :)
by Madrox
Tue Sep 09, 2008 7:28 pm
Forum: General
Topic: Help! PPPOE clients
Replies: 6
Views: 1103

Re: Help! PPPOE clients

What i want is to use the PPPOE client on the routerboard, so it gets ip to my user and then delivert this to eth1, so that he can connect a router or to a computer whitoute runing a PPPOE client.
by Madrox
Sat Sep 06, 2008 3:49 pm
Forum: General
Topic: Help! PPPOE clients
Replies: 6
Views: 1103

Help! PPPOE clients

Can use PPPOE client on routerOS to login get ip addrese and send it to eth1? So when a juse connect to the eth1 its get ipaddrese? and only one addrese? I have never tray PPPOE, but i have understand that it more safe, and gets more control. And use Freeradius whit MYSQL. Is it any downside whit PP...
by Madrox
Fri May 23, 2008 5:48 pm
Forum: Wireless Networking
Topic: Whats the best cable to use 5ghz minipci - anntenna
Replies: 6
Views: 2045

Whats the best cable to use 5ghz minipci - anntenna

Whats the best cable to use outdoor?
by Madrox
Fri May 23, 2008 9:41 am
Forum: Wireless Networking
Topic: Help!!!? Lost connection
Replies: 3
Views: 1027

Re: Help!!!? Lost connection

fix it
by Madrox
Fri May 23, 2008 9:40 am
Forum: Wireless Networking
Topic: signal crap, does this look right?
Replies: 10
Views: 1934

Re: signal crap, does this look right?

Have fix it, did get wrong cable, was 10 meters, no its just 5 meters, and right cable.
so signal is to 57/61, 60/62 and 66/66
by Madrox
Thu May 22, 2008 2:27 pm
Forum: Wireless Networking
Topic: Freq antenna and minipci
Replies: 1
Views: 1041

Freq antenna and minipci

Hey, got a question SuperRange5 whit 5 ghz freq can this card run on?
I just find that the card can run on 5,8 ghz can i only run it on 5805 and 5825?
and if my antenna only support 5,4 - 5,7?

Becose i got so bad signal..
by Madrox
Wed May 21, 2008 3:51 pm
Forum: Wireless Networking
Topic: signal crap, does this look right?
Replies: 10
Views: 1934

Re: signal crap, does this look right?

thx normis, Here is 4 the ap: 0 R name="wlan1" mtu=1500 mac-address=00:0C:42:18:E0:72 arp=enabled disable-running-check=no interface-type=Atheros AR5413 radio-name="000C4218E072" mode=ap-bridge ssid="ggnetfjell" area="" frequency-mode=manual-txpower country=no_country_set antenna-gain=15 frequency=5...
by Madrox
Wed May 21, 2008 12:13 pm
Forum: Wireless Networking
Topic: signal crap, does this look right?
Replies: 10
Views: 1934

Re: signal crap, does this look right?

Get this when i write AP: [admin@Fjell_Nord] > int wi pr Flags: X - disabled, R - running 0 R name="wlan1" mtu=1500 mac-address=00:0C:42:18:E0:72 arp=enabled interface-type=Atheros AR5413 mode=ap-bridge ssid="ggnetfjell" frequency=5260 band=5ghz scan-list=default antenna-mode=ant-a wds-mode=dynamic ...
by Madrox
Wed May 21, 2008 1:33 am
Forum: Wireless Networking
Topic: signal crap, does this look right?
Replies: 10
Views: 1934

Re: signal crap, does this look right?

think it is 2-3 km to the clients, so somthing is wrong, cable on ap 5 meters, 15 dbi sectorantenna, clients its 15 dbi antenna whit 15 cm cable. 350 mw cards in ap and clients 350 and 65 mw
by Madrox
Wed May 21, 2008 12:46 am
Forum: Wireless Networking
Topic: signal crap, does this look right?
Replies: 10
Views: 1934

Re: signal crap, does this look right?

AP: Flags: X - disabled, R - running 0 R name="wlan1" mtu=1500 mac-address=00:0C:42:18:E0:72 arp=enabled interface-type=Atheros AR5413 mode=ap-bridge ssid="ggnetfjell" frequency=5260 band=5ghz scan-list=default antenna-mode=ant-a wds-mode=dynamic wds-default-bridge=bridge wds-ignore-ssid=no default-...
by Madrox
Tue May 20, 2008 4:00 pm
Forum: Wireless Networking
Topic: signal crap, does this look right?
Replies: 10
Views: 1934

signal crap, does this look right?

hello, do this look right? i goot so poor signal 350 mw cards, 15 dbi antenna sector, 15 dbi antenna clients 0 interface=wlan1 radio-name="00156D538000" mac-address=00:15:6D:53:80:00 ap=no wds=yes rx-rate="6Mbps" tx-rate="6Mbps" packets=821,728 bytes=61837,64796 frames=821,728 frame-bytes=58579,6042...
by Madrox
Tue May 20, 2008 3:16 pm
Forum: Wireless Networking
Topic: Help!!!? Lost connection
Replies: 3
Views: 1027

Re: Help!!!? Lost connection

Did change fq:

5825
to
5260 and it begin to work again,
Its only works on the lowes freq at this momment, if i change to som higher it fall out agian?
Whats can this be? i got wors signal to
by Madrox
Mon May 19, 2008 1:48 pm
Forum: Wireless Networking
Topic: Help!!!? Lost connection
Replies: 3
Views: 1027

Help!!!? Lost connection

Hey, i have lost my connection top ap brigde white wds mode 3 clients was on this ap, 2 just fall out. I have had the system upp runing in a year? whats happen? stand in the log of the ap: 00:15:6D:53:80:00@wlan1: conneted,wants WDS 00:15:6D:53:80:00@wlan1: reassociating 00:15:6D:53:80:00@wlan1: dis...
by Madrox
Sun Mar 23, 2008 3:53 pm
Forum: General
Topic: Nat-Sessions
Replies: 8
Views: 2041

Re: Nat-Sessions

ok, thx :)
by Madrox
Sun Mar 23, 2008 1:36 am
Forum: General
Topic: Nat-Sessions
Replies: 8
Views: 2041

Re: Nat-Sessions

We did think that to at the begining, but we did run som tests, and it was not that. the cpu load was betwen 20-30% @ 100 mbits, 50-80% 250 mbits was never on 100% was a strong server, so hardware is not the problem. Som other ides? Have mikrotik run sessions-test? or is it som other peppol that hav...
by Madrox
Fri Mar 21, 2008 11:58 pm
Forum: General
Topic: Nat-Sessions
Replies: 8
Views: 2041

Re: Nat-Sessions

In the beging every thing work stable. after a while when we get over 100 mbits/ 15 000 sessions then we got som problems like conecting webpages, but if you just wait 30 sec and refresh it did get the page. All the sessions that was creat befor that cut was still stable, like bittorrent, MSN. Was l...
by Madrox
Fri Mar 21, 2008 8:10 pm
Forum: General
Topic: Nat-Sessions
Replies: 8
Views: 2041

Re: Nat-Sessions

ok did look at it stand 524288 max entris is that standard of routerOS or is it hardware calc? Did have lan event whit over 200 computers, and i did get a problem when i get over 100 mbits or over 15000 sessions? But im note sure if it was my router or it was the gateways out side my network. did ru...
by Madrox
Fri Mar 21, 2008 3:02 am
Forum: General
Topic: Nat-Sessions
Replies: 8
Views: 2041

Nat-Sessions

What is the max Nat-sessions routerOS can have?
by Madrox
Wed Jan 30, 2008 5:15 am
Forum: General
Topic: Setup ipv6 gateway
Replies: 1
Views: 1373

Setup ipv6 gateway

hello, To day i did get the ipv6 tunnel to work. Use: http://www.tunnelbroker.net I have never setup a ipv6 gateway, have done it whit ipv4. But ipv6 was tricky. Assigned /64: 2001:470:1f09:bc:: What now? IP: Did add 2001:470:1f09:bc::1 to my router Route: Did add 2001:470:1f09:bc::1 gateway des: ::...
by Madrox
Mon Jan 28, 2008 5:18 am
Forum: General
Topic: Ipv6
Replies: 64
Views: 18634

Re: Ipv6

hey, im just playing around whit ipv6.

/ipv6 route add dst-address=2000::/3 gateway=::216.66.80.26
Wonder why that address?: dst-address=2000::/3
by Madrox
Fri Nov 30, 2007 1:32 am
Forum: General
Topic: RC11 very bad wireless
Replies: 28
Views: 6105

Re: RC11 very bad wireless

Have run now beta on all my routerbords and ap a while. All working great, ofc som problem here and there but find always a soulosion. and remember its e beta. be for i did jus avaya wirless systems. And the mikrotik systemts it 10 times more stable, and more control. You can do what you want. About...
by Madrox
Thu Nov 29, 2007 4:29 am
Forum: General
Topic: How to get multicast to work? :shock:
Replies: 0
Views: 1035

How to get multicast to work? :shock:

Im trying to setup a multicast on my nettwork I got Mikrotik router 192.168.0.1 I got Linux server whit vlc 192.168.0.2 I have tride to follow the guid on wiki, but i dont understand how to set it up This is form the wiki guid. Sender -- (subnet I) --> Router A -- (subnet II) --> Router B -- (subnet...
by Madrox
Tue Nov 27, 2007 7:10 pm
Forum: General
Topic: Winbox stop working Beta 3.0rc11
Replies: 3
Views: 1712

Re: Winbox stop working Beta 3.0rc11

thx that works ;)
by Madrox
Tue Nov 27, 2007 4:29 pm
Forum: General
Topic: Winbox stop working Beta 3.0rc11
Replies: 3
Views: 1712

Winbox stop working Beta 3.0rc11

After upgrading from rc10 to rc11 the winbox stop working.
Its a X86 other pepol that got this problem?

It loggin in and opening the windows but close right away.
Have also upgraded my 333 whit rc11 and that works.
by Madrox
Fri Oct 26, 2007 1:40 pm
Forum: General
Topic: Help me understand: PublicIP and LocalIP
Replies: 1
Views: 444

Help me understand: PublicIP and LocalIP

This is my nettwork -ISP-PTP-PTP-Router-Switch-AP-Clients Im getting a subnet /24 from them Then i got a local net for all the ap's and clients routerbords on /24 subnet How do i route the public subnet /24 to my clients? I have never done this, i have route local nettworks before but not public. Wh...
by Madrox
Tue Oct 16, 2007 8:25 am
Forum: Wireless Networking
Topic: My first 5ghz Ap mikrotik. Ping unstable
Replies: 4
Views: 1145

Re: My first 5ghz Ap mikrotik. Ping unstable

Now i have ben here in 23 hours and have try evrey thing. :P I dont know if im going crazy or that i fact did get it littel better . I did get the system about 1 week ago. Did i think its was finsh full upgradet firmware and software. But when i did type system routerbord print AP current-firmware: ...
by Madrox
Tue Oct 16, 2007 2:28 am
Forum: Wireless Networking
Topic: My first 5ghz Ap mikrotik. Ping unstable
Replies: 4
Views: 1145

Re: My first 5ghz Ap mikrotik. Ping unstable

ok, but ping chage up to 30-100 ms just on 20 mbits its that real hight?
So if i chage my ap to be from routerbord to a pc?
Whill i have better ms then?

But have i good signal or bad?
by Madrox
Mon Oct 15, 2007 11:48 pm
Forum: Wireless Networking
Topic: My first 5ghz Ap mikrotik. Ping unstable
Replies: 4
Views: 1145

My first 5ghz Ap mikrotik. Ping unstable

Hey i have sett up my first mikrotik ap, but i got a ping problem. And i do not now what is a good signal and a bad singal. All this things is new for me. Will try to give you all the info that i now about so u mabe can help me. Its 2.17 km bettwen the client and AP AP Hardware: Routerboard 532A Sup...
by Madrox
Tue Oct 02, 2007 10:21 pm
Forum: Wireless Networking
Topic: Brigde?
Replies: 0
Views: 498

Brigde?

Hey, I got my system to day :) Have 2 anntena and 2 routerbords whit mikrotik. my mission its to link the network at work to my home office. what i want it like i can do like this My network: 192.168.0.0 Client-192.168.0.10 - - - - - - - - - - - - - - - - - - - - 192.168.0.7 Client Client-192.168.0....
by Madrox
Wed Sep 12, 2007 11:34 am
Forum: General
Topic: Routing Internet ip
Replies: 9
Views: 1159

Re: Routing Internet ip

can you answare me?
by Madrox
Mon Sep 10, 2007 10:06 pm
Forum: General
Topic: Routing Internet ip
Replies: 9
Views: 1159

Re: Routing Internet ip

for the local ip that have i dont and work great.

So how to my make a direct nat?
Thx for a fast answer that help me :)
by Madrox
Mon Sep 10, 2007 2:05 am
Forum: General
Topic: Routing Internet ip
Replies: 9
Views: 1159

Re: Routing Internet ip

Can you write the rule? Do not understand. Just write my problem once more: Its it possible to route the local ip. And the public ip? Lets say that i have my router whit one public ip 222.222.222.222 and then i have 5 more public ip accessable 222.222.222.223 - 222.222.222.228. and its 10 mbits shar...
by Madrox
Sat Sep 08, 2007 6:05 pm
Forum: General
Topic: Routing Internet ip
Replies: 9
Views: 1159

Re: Routing Internet ip

My mikrotik router got now one public ip.
But i want to control the other public ip like shape trafik to them.
so then they have to go ttho my gatway.
My gateway now stand and controls my local ip.
whats MT?
by Madrox
Fri Sep 07, 2007 11:59 pm
Forum: General
Topic: Routing Internet ip
Replies: 9
Views: 1159

Routing Internet ip

Hey, Now i got my mikrotik box working whit mac filter and limit list, and every thing work great :D Thx MIKROTIK! ;D but i have a questen that i have wonder over in a long time, but never get a anwer that helps me. I got 5 ip from my isp and i want to get them tru my router so i can shere them to t...
by Madrox
Wed Sep 05, 2007 4:10 am
Forum: Beginner Basics
Topic: Mac filter
Replies: 2
Views: 3387

Mac filter

Hey, Im have begin to use router OS.
I wonder how can i make that its only peppol whit the right ip and the right mac, that can use the router?