MikroTik

İmposss

Hello, I tried mikrotik doh dns and I could not a doh dns connection over ipv6. My configuration is as below. While it can make a DNS query directly via the IPv6 DNS address, an error appears over https. "DoH server connection error: resolving error" Can anyone use doh dns over ipv6? Thank...

İmposss

hi you can try "ft-over-ds=yes" to no.

It was working with problems for me too. It disrupts the connection between AP and router. The Ethernet interface was disconnected and connected again at a lower speed and remained at 100mbps.

edit:it is fixed

İmposss

@İmposss authentication rejected means what it says. There is something wrong with authentication for that device/radio. Please create new thread and post your problem and config there. Hello, today we decided with the support team that the problem occurred because the device causing the problem do...

İmposss

Hello, I am having a similar problem and I am looking for a solution with the support team. When you enable wireless debug in the logging section, will "authentication rejected" appear in the logs when an error occurs? We may be experiencing the same problem. For logging: /system logging a...

İmposss

solution for me:

/interface/wifiwave2/configuration> set [find] security.connect-priority=0/1

İmposss

Hello. I don't open new threads. I am writing about my experiences with similar problems. To support myself or to support someone else. There was a return from the support ticket I opened today. My problem was due to choosing different countries for 5 and 2.4 ghz. It used the lowest values on both r...

İmposss

In the logs my other clients show "[client MAC]@[radio name] roamed to [client MAC]@[radio name]" when fast roaming. My XPS only ever has a disconnect/reconnect log entry or the dreaded SA Query Timeout. This is a 2x hAPax3 setup with an rb5009 as capsman controller. Hi try it: /interface...

İmposss

How / where are you monitoring the TX power? Are you using the wireless link when the power is decreased? There should be something downloading when you check Hi you can see it in this post : https://forum.mikrotik.com/viewtopic.php?p=1017316#p1017316 On wifiwave2 tab, two tx power selected on colo...

İmposss

Hello, I have a similar error. As a solution, I choose the wrong radio in the radios tab and fix it by pressing the provision button. Sometimes it is powered by Cap poe, and the system may stop working due to low voltage. If there is autosupout.rtf in the files, the poe voltage is insufficient. my o...

İmposss

Did you try to contact Mikrotik support ? At this point they maybe can help you more.
Best recommendation to get... create supout.rif, contact support.

I did, waiting for support

İmposss

Did you try to disable WPA3 ? That was problem in earlier versions of ROS.

i tried, problem is not solved

İmposss

This happens in clients roaming between two 5ghz APs. Unable to connect to network without disconnecting and reconnecting. During this break, the message "disconnected, SA Query timeout, signal strength -54" appears. Roaming is not working. My config:https://forum.mikrotik.com/viewtopic.ph...

İmposss

same problem. i am waiting for solution

İmposss

Try disabling band steering. I noticed these SA Query Timeout messages just before re-associating with another radio. https://help.mikrotik.com/docs/display/ROS/WifiWave2#WifiWave2-Steeringproperties /interface wifiwave2 configuration set [find] rrm=no wnm=no Hi i tried it doesn't work /interface w...

İmposss

An issue that came with version 7.11. I reverted to version 7.10.2

İmposss

Hello, I have two hapax3 devices. One is located on the upper floor of my house and the other on the lower floor, and I use the one on the upper floor as a router and the one on the lower floor as a cap. They are connected to each other with a cable. All of my problems are related to wifiwave2. I'm ...

İmposss

ı opened support ticket

edit: 17db txrate: my fault. I was selecy two different country

bridge port created automaticly when interface "R"

İmposss

Hi first thanks. I tried local radios work on capsman. First select manager=local and you need one time provisioning local radio on radio window and radio stuck on local managed mod :D InkedEkran görüntüsü 2023-08-05 132714.jpg Ekran görüntüsü 2023-08-05 132810.jpg Local and remote cap works on same...

İmposss

Hi i have 2 hap ax3. I use capsman on my home. Remote cap work great and create datapath port for bridge but local cap not create port on bridge. I need to add rule for all dynamics. Second ıssiuse when provisioned local cap, stuck on dynamic mode. When disable provisioning rule and again provisioni...

İmposss

Hello, I am using two Mikrotik Hapac2 at my home. My internet speed has increased and a problem has emerged. While there is no problem with 1x1 devices at both close and far distances, computers with 2x2 Intel chipset adapter cards (I couldn't try other brands) become unusable at far distances, it i...

İmposss

Testing with laptop, Windows 10, Intel(R) Wi-Fi 6 AX201 160MHz. BTW, just tested same laptop with TP-Link Ancher C5 and with cAP AC. cAP AC gives me 40 Mbps, while TP-Link gives a stunning 300 Mbps. Both on 5 GHz. Hello, I have the same problem. Only on ax210 devices. Did you find a solution or doe...

İmposss

Hardware request: RB5009UPr+7G+1XG-S+IN Ethernet Details 10/100/1000/2.5G Ethernet ports 7 Number of 2.5G Ethernet ports with Reverse PoE (PoE-in) 7 Number of 10G Ethernet ports 1 Number of 10G Ethernet ports with Reverse PoE (PoE-in) 1

İmposss

Hi remove isp port from bridge. not necessary

already natted pppoe client or dhcp client for internet.

or

you can try dhcp snooping on bridge settings

İmposss

It works, but you have to specify interface as part of address (fe80:xxxxxxxx%etherx), that's normal for link-local addresses.

İt is working thankyou.

İmposss

Hi. I have two hap ac2 connect with cable. I have ipv4 and ipv6 addresses and connections. Bt test working behind two devices with ipv4 (local) and global ipv6 address. But bt test is not work with link-local address (fe80::/64)

Thanks.

İmposss

Hi i thinking you can add new bridge and add your isp interface to this bridge and copy isp routers mac address to this bridge (admin mac) and use this bridge for isp interface.

İmposss

If you trust all the devices in your home network, a firewall on the device connecting the home network to the internet is sufficient. If you don't trust all of them, and create multiple VLANs/SSIDs so that trusted devices would use one VLAN/SSID and non-trusted ones would use another, it may still...

İmposss

Hi
I have setup in my house, i using capsman and one cap. I have a firewall on router. Am i need firewall on cap for input chain? (ipv4)
Second one, accept RA:yes on ipv6 settings for cap. Am i need firewall ipv6 on cap? Cap have a global ipv6 address. Because cap is my second dns server.

Thanks.

İmposss

flush dns cache

İmposss

Hi ı have a question. Am i need nd ipv6 and ipv4 both protocols on caps?
What happens if I turn it off on caps?

Thanks.

İmposss

I understanding this is on clients. When disabling tcp/ipv4 ı can see ipv6 dns. No problem on mikrotik.

İmposss

Yes, but with a rather different configuration - v6.48.6; ND has advertise-dns=no , as this version does not allow the offered DNS servers to be configured, and other-configuration=yes ; DNSv6 addresses provided by DHCP option 23. Additionally no capsman, as the radios are configured directly, but ...

İmposss

Anyone can see ipv6 dns on wifi clients?

İmposss

Maybe viewtopic.php?t=157341 although odd that it affects DNS but not the gateway.

Thanks. I tried to multicasthelper:full. No affect

İmposss

Is the bridge interface the gateway for these devices?

Yes my local bridge is gateway and my dns server

İmposss

If you are using SLAAC for addressing RDNSS is used to hand out name servers. Still check that you have the interfaces in /ipv6/nd handing out name servers. Here is a setup from winbox that is issuing RDNSS to all interfaces to Google's IPv6 DNS servers. Screenshot 2022-05-01 073206.png Thanks, Yes...

İmposss

Make sure in /ipv6/nd you have the dns servers you want advertised available to all the interfaces you plan to use them on.

Thanks My dns server is my gateway. Ethernet's clients can get auto ipv6dns config but wifi's clients can not get ipv6dns auto config address.

İmposss

Hi i use two hapac2 and capsman. My problem: i wrote my bridge ipv6 address (my gateway) in "ipv6/ND dns server". It advertise on ethernet clients. I can see it but on wifi clients cant see ipv6 dns. I use doh in mikrotik and nslookup command work with mikrotiks ipv6 address.

İmposss

Hello
I am using ''channel/save-selected'' in /caps-man configuration. İt saves the last picked frequency.
https://wiki.mikrotik.com/wiki/Manual:CAPsMAN

İmposss

Hello I have 2x hap ac2. Windows computers are get reassociating when internet connection is not used. Sometimes phones reassociating only one time too. İs this a problem? https://i.ibb.co/mbKcYTg/Ads-z.png Problem logs 12:38:09 caps,info BC:77:37:10:25:0C@Wlan 2.4GHz-hAP ac22-1 connected, signal st...

İmposss

I had to disable dhcp snooping

İmposss

I guess it happens when internet connection is not used on windows pces. I have tried almost everything. I set ACL rules, adjusted transmit power, changed dhcp settings, changed bridge settings. Unfortunately same problem 12:38:09 caps,info BC:77:37:10:25:0C@Wlan 2.4GHz-hAP ac22-1 connected, signal ...

İmposss

add action=reject allow-signal-out-of-range=10s disabled=no interface=any ssid-regexp="" A lockout of 10 seconds might be too long if the roaming back happens faster. I use 1s for the reject line, even 30s for the accept line. All that should be based on own experience and preference of c...

İmposss

same problem 10:55:02 caps,info E8:93:09:5B:B0:00@Wlan 5GHz-hAP ac22-1-1 connected, signal strength -74 10:55:02 caps,info E8:93:09:5B:B0:00@Wlan 5GHz-hAP ac2-1-1 disconnected, registered to other interface 11:38:14 caps,info 00:1B:9E:4F:CA:DB@Wlan 2.4GHz-hAP ac22-1 connected, signal strength -44 11...

İmposss

Same problem

İmposss

I think dhcp nak packets are blocking on trusted interfaces. And why i see the '' lease not found '' before nak packet? İs nak packet receiving by client? Does anyone know?

İmposss

Up up

İmposss

Hello I think there is a problem in dhcp snooping. I have same problem on my two hap ac2. Main router work well but when connect to like cpe hap ac2, clients can not get ip. I disabled dhcp snooping for now. Search to solution.

İmposss

Hello I configured my two hap ac2s like this link: https://wiki.mikrotik.com/wiki/Manual:Interface/Bridge#DHCP_Snooping_and_DHCP_Option_82 (F)First hap ac2 : capsman, dhcp server, firewall,pppoe client and bridge with dhcp snooping and op82 (S)Second hap ac2: only bridge and dhcp client for bridge. ...

Search found 49 matches