Hello, I’ve configured WireGuard on my MikroTik router (version 7.16), and it’s working correctly for one peer (Hamed-PC). This peer is able to connect, access the internet, and use the tunnel without any issues. However, for a second peer (Omid), the handshake is successfully established, but no tr...

Hi everyone, :( I’m trying to set up a wireless network with CAPsMAN, and I need the clients to receive IP addresses from a DHCP server on VLAN 202. Here’s my current setup: I created VLAN 202 on the CAPsMAN router. I added a bridge named Bridge-CAPsMAN-202 with vlan-filtering=yes. DHCP server is co...

These look like 10cm thick. I would expect to have at least a weak signal -80 or worse. My AP penetrates at 2 times a 25cm brick wall and some 10cm brick walls in between and I still have a very weak signal. But no signal is super strange. Look at my config: set [ find default-name=wifi2 ] channel....

Can you estimate the wall thickness? Solid brick or with air chambers?

Bricks with air chambers like this:

The walls are made of bricks.

Hello everyone, I’m using a MikroTik cAP ax access point mounted on the ceiling. Based on the specs and power of this device, I expected the signal to reach a room that is two walls away, but unfortunately, I’m not getting any signal there. The distance between the access point and the room is less ...

I am experiencing issues with CAPsMAN configuration on my network and would appreciate some guidance. Here's the setup: I have three cAP ax access points, all running RouterOS version 7.15 with the wifiqcom package. CAPsMAN is configured on my main router, a CRS326, also with the wifiqcom package. T...

I have a MikroTik RB951 router running RouterOS version 6.49, which I want to manage using CAPsMAN on my CRS326-24G-2S+ switch that is running RouterOS version 7.15 with the new CAPsMAN setup under the WiFi package. However, I am unable to see the RB951 in the CAPsMAN interface, even though other CA...

/ip firewall nat add chain=srcnat out-interface=l2tp-out1 action=masquerade /ip route add gateway=l2tp-out1 routing-mark=via-l2tp /ip route rule add src-address=192.168.1.95 action=lookup-only-in-table table=via-l2tp Depending on your current configuration, you may need to place the firewall rule a...

Hello, Anybody there ?

Good Morning, what kind of VPN are you using ? Can you Post your Config ? I'm using an L2TP client and I want route all traffic of 192.168.1.95 through VPN. there is no config. I want to know what should I do. I don't know if I should use Mangal and Mark or simple route will work thanks a bunch

Hi Everyone!
Please tell me how can I preroute all traffics on local device to VPN connection?
for example my device IP: 192.168.1.95
I want all the packets sent and received by this device to be done through VPN

After connecting to VPN can't see and ping local network devices. I have routing through a VPN connection using Mangle and mark routing, when I disable the IP route (mark routing) my problem will fix.
give me some help
ty