You already have MPLS button. Why dont add SD-WAN one?

What device do you have?
It is a big step to jump but should be fine I think.
If you can partition your device then rollback will be simple.

It's Mikrotik RB2011UiAS

Hello guys,

About firmware upgrades.

Is it safe to skip versions when upgrading routerOS? I need to upgrade 6.42 to 6.49 can i do that directly or should i do it version by version?

Literally everyone: NAT loopback
Mikrotik: Hairpin NAT

Use Alexa devices... From my Office I can control devices at my Home (different cities and networks) with vocal commands... :lol: im gonna tell them to change system who cost them 20 000 euro :D (its more of home automatization then smarthome) but if i have to be honest we switched them to fortigat...

Ever home user needs mDNS. I am a home user and do not need it. Why is your assumption so absolute? It is absolute-ly false. My 4,000 contracts (home and business), corresponding to more than 16,000 people, do not have it and no one has ever complained about it. Please explain which critical part o...

@sindy

Oh sry i had fasttrack rule enabled back for some reason. Its working now.

@sindy So basically when i do just this rule: Flags: X - disabled, I - invalid, D - dynamic 0 name="APT1" target=10.0.0.151/32 parent=none packet-marks="" priority=8/8 queue=ethernet-default/ethernet-default limit-at=0/0 max-limit=20M/20M burst-limit=20M/20M burst-threshold=10M/1...

@sindy I would be glad just for simplest solution. Its not big complicated network. Just building with few apartments. They get address from DHCP pool in vlan with MAC binding on their router WAN port. I need to give different tenants different speed, thats why i tried to do simple dedicated queue. ...

Hi, Need to limit internet speed per ip in vlan. Using simple queue for that. It only works to limit internet speed for whole vlan. But not specific IP in that vlan. [admin@MKTK-RYBNA] /queue simple> print Flags: X - disabled, I - invalid, D - dynamic 0 name="internet_limit" target=10.0.0....

@sindy

Oh i didnt know it automatically assign /32 CIDR, thought its /24 all the time.

@anav

The FW rule was there only for logging traffic and debugging reasons it will not be active.

There is L2 switch on the end of ether3 port where i need to have LAN and vlan traffic aswell.

Two points:

/interface vlan set [find interface=ether3] interface=rybna_lan

/ip address set [find interface=VLAN-BYTY] address=10.0.0.1/24

Hi, it helped.

Can you please just explain what it exactly did or what was wrong?

Thanks,

Hi, Dealing with problem on MikroTik RB4011. Have VLAN with DHCP server on it(10.0.0.0/24). When i connect laptop into VLAN i get right ip adress, gw and dns from vlan-2 dhcp pool. But internet is not working and cannot even ping my default GW (10.0.0.1 - vlan interface). On default LAN(1) everythin...

@anav 1.) Oh i didnt know i can just assign address and it will act as WAN interface. Still new to mikrotik but that kind of fixed all my issues. Thanks 2.) Its just connected to L3 switch which have assigned vlans on specific ports. 3.) They are in use on the switch - access points, which broadcast...

It still says: "failure: it can not run on slave interfaces"

Paste this on terminal without omit the { } !!! { /ip dhcp-client set [find where interface=WAN2] interface=ether2 /ip firewall nat remove [find where out-interface=ether1] remove [find where out-interface=WAN2] /interface bridge port remove [find where bridge=WAN2] /int bridge remove [find where n...

paste actual /export hide-sensitive without remove anything, simply censoring sensitive data with * # aug/04/2021 13:00:46 by RouterOS 6.48.3 # software id = 1PH9-QHR7 # # model = RB3011UiAS # serial number = E7E60E25645E /interface bridge add name=WAN2 add admin-mac=2C:C8:1B:B5:C8:BB auto-mac=no c...

The forum is full of examples... On both DHCP client remove "add default route" Remove all mangle and all routes you are set and paste this on terminal. /ip dns set servers=1.1.1.1,8.8.8.8 /ip route add comment="A - 1.1.1.1 must be reachable only from ISP1" distance=1 dst-addres...

Hi my fellow network admins, Im trying to configure dual WAN failover on Mikrotik RB3011. For now both "WAN" ports are DHCP, i have 2 bridges designated to ether1 and ether2 ports and each one have own dhcp client which im simulating "ISP" https://i.imgur.com/htZ5FDb.png Gateway ...

Hi, Im trying to establish ipsec tunnel between mikrotik and my linux server with Libreswan but im still getting "NO PROPOSAL CHOSEN" i literally tried every combination of proposals and always the same error. Peer settings i have now (i tried weaker ciphers cause i was desperate): https:/...