MikroTik

But it could be the problem is originating from a too soon startup which causes the SIM PIN not to be set at which point watchdog might get stuck in a bootloop. So a reset of LTE interface some seconds after boot, might still be in order then. Or one will never get out of the loop. Again: I complete...

Make a support ticket with clear description of problem and supout.rif file.

MT staff is not reading all posts here (some pass by but not all).
This is a user forum.

Disconnect and check that PC offline !

Either a bot or some virusscanner trying to get in your router.
The fact it's trying to use several different user names, makes me think it's not up to any good.

If your carrier is giving you a CGNAT address (and most do), nothing you can do about it. What is the ultimate aim of getting your dynamic IP address. To get back in ? Doesn't work that way with most LTE carriers. You need to create a tunnel OUT first to a known location and via that way you can get...

Flash is flash. Flash used in pendrives should be more or less the same quality as flash used on MT devices. It's best to avoid lesser know brands, however. I've run some things on a Pi-3 for years using a flash drive. No issues whatsoever. Currently I run 3 containers on RB5009 using Sandisk flash ...

Yes, now the rb5009 doesn't need the qcom package you will have to upload it for the ax APs for auto upgrade to work via capsman Actually, you ALSO need to upload the base ROS package to that folder or those APs simply disappear from capsman once you got a folder specified. Even with "none&quo...

Upgraded RB5009 from 7.13b1. It appears upgrade of APs (AX2 and AX3) via capsman manager does not work anymore like it used to be. Select APs, hit "Upgrade" and nothing happens. Log file shows an interesting entry: 0xf7f0f460 manual upgrade request failed, no file (wifi-qcom-7.13rc2-arm64....

Not sure what you're trying to achieve with all those port_scanner rules ? Waste of time, if you ask me. Drop everything, simply add accept rules before that drop rule (don't forget winbox, webfig,... whatever you need for yourself. And use SAFE MODE or isolate a port, off bridge). No need to spend ...

1- no. ARM/ARM64 devices only. That point is quite clear. 2. It may, it may not. Depends if a path can be found using the parts still left operational :lol: But you can always host your own zerotier cloud controller ... 3. Yes and no. ONE part on that network needs to be zerotier-capable. From there...

Off topic: Is this a planned exciting move, or a not so glad eviction notice? Planned move to apartment. Our house was built for 5, the kids all left. So time to move into something smaller, easier to maintain, ... In reality the new place is as far as habitable floor space is concerned, the same as...

7.12.1 or older, no problem to add wifiwave2 package to CHR and use that one as capsman controller.
7.13 beta, capsman should be included already in base bundle. The whole wifiwave2 menu tree is from here labeled wifi.

I'll put it on a someday/maybe list ... moving places, still got large part of current house to be emptied.

Dear MT,

Can u check this issue please.
So many people using your hardware as enterprise things not just a home things

Thx

What are you doing with a beta version on enterprise environment then ??

What settings do you want me to show, happy to help!

In previous versions Winbox showed possibility for 20/40/80/160 as channel width on AX2 and AX3.
Seems it's not the case anymore from what I can see on some of my devices so that's a good thing, no confusion anymore.

Just a word of caution: 80+80 is not the same as 160. And if I'm not much mistaken, ax2 doesn't support any of these variants. Correct. That chipset, also used in AX3 and cAP AX, is unable to go to 160MHz channel width (or any underlying combinations). Why the settings you see in Winbox/webfig do s...

@holvoetn: I can just imagine you reading the following resolution thinking... I told you so.

I NEVER would do such a thing

Good thing you found it yourself.

@whatever: that's the one I use as well on my phone. On PC I use Wifi Analyzer https://matthafner.com/wifi-analyzer It appears that out-of-the-box my Mikrotik hAP ac3 doesn't have the wifiwave2 package installed. Out of the box it still comes with ROS6, I believe :lol: @holvoetn: If I install the wi...

I understand the confusion. Also because in R6 it was shown in Gb from CLI... Wiki pages (R6) show it with Gb. Help pages (R7) however are all in bytes. My advice: Divide the number 3 subsequent times by 1024, a bit of free mental training :) Or simple place mentally a decimal sign between 9th and 1...

Use simple queue ?

The hard but most effective method for cleaning = netinstall.
With reset some things may still be left.
With netinstall everything is completely gone, a real clean install.

I don't know what country you're in but for me, it shows this (AC3 device with wifiwave2 driver): [xyz@TP-Lint-AC3] > inter wifiwave2/radio reg-info country: Belgium number: 1 ranges: 2402-2482/20 5170-5250/23/indoor 5250-5330/23/indoor/dfs 5490-5710/30/dfs If your iPhone is transmitting above 5710,...

@normis: don't get me wrong ! I welcome what you guys did a lot, it really shows your company is willing to make the extra effort for your customer base. It will certainly help to boost sales on the still existing arm-AC devices now they can be reused/reconfigured and even expanded in numbers for ex...

Just some thoughts ... I have the impression with the release of 7.13beta and the wave2 ac-drivers, MT shot a bit in their own foot. On one side it will make sure current owners of wap AC have no real incentive anymore to move towards AX. Potential missed sales. On the other hand, since wAP AX is no...

Not if those non-Mikrotik devices ARE capable of using those higher frequency ranges.
Don't assume. Check.

Assumptions are the #1 reason for most failures.

To my knowledge: As it is now: You need (at least) one capsman controller using wifiwave2 and (at least) one separate controller using legacy wifi-package for controlling the respective access points through capsman. As far as I am aware you can not run both wifi-packages on the same capsman contro...

Are you sure the frequency used by iPhone when in hotspot mode is within range of AC3 5GHz band ?

...and at the same time kills radio signals, mr radio engineer

Already tested on ac2 and cap ac, it works just fine !

Leds in the back can be disabled.
Turn around the device then ?

All mikrotik routers can use DDNS (IP / Cloud).

My view as well.
Moving from V6 to 7.12, it might be better to netinstall to be sure all cobwebs in the dungeons are cleared.

Just noticed on AX2 ... all ethernet ports have POE tab ??

EDIT: my bad. Ether1 only and that's correct.

Look on this page:
https://help.mikrotik.com/docs/display/ ... geFirewall

Hello Time (and lots of other STP stuff) is a setting under Bridge Firewall, so it seems.

The CME Gateway is interesting — like the PoE IN & OUT — but what does the "CME" acronym stand for?

Educated guess ... Cat-M to Ethernet ?

You need a different MAC address for each end of each EOIP tunnel. If you use IP address, 1 IP for each device where you connect to. In your case: 2 tunnels = 4 ports = 4 MAC addresses. 3 devices being connected = 3 IP addresses. You need to look at EOIP as an ethernet cable. Every ether port has it...

If you can replicate this behavior, best to create support ticket with supout.rif included.

I removed my reply since it was ROS only.
You're looking for swos input.

Post moved to SWOS section.

I think that shouldn't be a problem.
Just don't use wifi and set LTE interface to passthrough mode (last part is how I think it should be done, never used it myself).

True but then you loose all user info (which you can keep at reset if you set the checkbox) but you will also loose all previous made wifi settings.
And you need to remember to switch OFF caps mode again before starting to configure wifi again.

There is more then 1 way to reach Rome

ROS 6.49.10 is a special case because it is AND stable AND long term. You can ignore that message (though it's not logical at all). If you want to upgrade to ROS7, you need to use upgrade channel (but not needed here). When you configure the device using wireless, it would be a bit normal to loose c...

Now THAT's a big bug !! Have you contacted support about this ? As a side note: in your first post you mentioned you were told to move it to SWOS. Who told you so ? Personal note: I also have a SWOS device in my home network (CSS610, SWOS-Lite) to learn what it is but I prefer ROS a lot more (much m...

This is quite possible. Quick version: - Connect using Winbox MAC on ether2 of cAP AX - move ether1 from WAN to LAN list (important for firewall and NAT) - move DHCP client from ether1 to bridge - remove DHCP server - add ether1 to bridge And that's it, I would think. You could also choose to comple...

I've done quite a bit of reboots already using Winbox 3.40 / System / Reboot ...

Not really seeing where the questions are ? Here are my thoughts. I am assuming you're going to setup everything locally (read: no capsman). In that case, literally the smallest you can get is mAP Lite (about as small as a matchbox !), eventually mAP so there is one more ethernet port if needed. 2.4...

First, to answer your question about RIP, as I've mention befoure , in my work place is an VPN server witch connect 22 locations witch are sharing their network classes between them using RIP, it was the easiest way in 6.49. You never mentioned before there were 22 sites connected to that VPN :lol:...

Yes but since you can not test it in a separate environment, I advise NOT to implement this in production with a beta version. These new drivers are too new, still some quirks to be ironed out and no real long-term feedback yet as far as stability is concerned (though the first responses I've seen h...

With the release of 7.13 BETA ( ! be careful if you want to use this in production environment ! ) cap AC and cap XL AC devices are able to use wifiwave2 drivers. Is it an option for you to set up a test environment using those wifiwave2 drivers as capsman ? You would also need a controller using th...

Wait what? wAP ac is mipsbe with AR9300, but the wifi-qcom-package works on it?
That's pretty cool!

Sorry to burst your bubble but this is about wAP AC arm version...
https://mikrotik.com/product/wap_ac

No experience with RIP. I could be wrong but I didn't see anything specifically being mentioned on that function not working anymore in release notes for ROS7 ? Maybe best to open new topic on that specific part. As a workaround, you can still setup the needed routes manually for now. Question from ...

Just setup L2TP.
It should work between 6.9 and 7.12

Find that hard to believe, wireguard was not possible on vers6 Yes, I have 2-3 port forward rules, and one VPN out, with RIP on it, and one VPN in wireguard to an interner Homeassistent server. Who says wireguard was setup on Tik ? It's WG in to internal HA server, so I understand ... Who's making ...

Actually not.
The way old capsman worked is quite similar how wifiwave2 is set up.
The commands shown in the web page can quite easily be found back in the gui part.

I'm going to let this one pass to show this is a CLEAR chatGPT response.
It DOESN'T know yet MT made wifiwave2 drivers available for AC devices... so much for the parrot response.

But the member posting it ... bye bye.

1- local radios are managed locally. Those can not be controlled by capsman but since they are running on the same device acting as capsman controller, radios will participate in roaming (provided you use the same config/ssid/...) 2- no, that's not normal. Where is your DHCP server ? I don't see it ...

The help page I linked to is a quite good start. Make sure in configuration FT tab to enable "FT enable" to yes and "FT over DS" to yes If you also plan to use radios of AX3, those need to be configured locally (don't set them to use capsman, only local). But since they will shar...

... but it does require, for now, 7.13 beta version.

If you have 2000 devices in the field, I would think you have some leverage to get this corrected through support channel ?

Which devices do you plan to use via capsman ?
If you only have that one ax3, set it up locally and done.

AX3 is a wifiwave2 device.
Capsman for wifiwave2 can be found under the wifiwave2 menu structure.

https://help.mikrotik.com/docs/pages/vi ... d=46759946

What does log say ?

Most likely not enough space to upgrade.

This one from Mikrotik helped me a lot setting up pcc between vdsl and lte.
But you need to hide the subtitles since some key info was hidden under them

https://youtu.be/nlb7XAv57tw?si=Jcst1QXGBJI-8Fp-

Using vlan, certainly so.

I suppose it should be PCC.
Per Connection Classifier.

Another thing to consider: If the devices communicating unexpectedly are on the same network segment without passing the router, it's normal they can talk to each other. The router didn't have a chance to block anything. A network diagram might help to clarify things (can be a simple drawing on pape...

We need to know a bit more on the context, a network diagram perhaps ? Simple drawing on paper can be enough. General advice: 1 bridge on your router, unless you have a real good reason to have multiple which for most, myself included, means if you do not exactly know why you want to split, keep it ...

Which is probably why nobody answered yet.
That and it's weekend...

Nope.
Only as of 7.13b this should be possible.

Towards old Wireless, it says.

Wireguard
L2TP/IPsec
Openvpn

Pick one.
Help pages from Mikrotik describe setups for each of them.

Personal favorite: wireguard. Outperforms all the others.

Best to create supout.rif and make a ticket to support with your findings.

and also station-bridge is not supported on wifiwave2

Actually, since 7.12 it is.
Already tested it.

*) wifiwave2 - added station-bridge interface mode;

And you may want to start to read this excellent reference material from member pcunite:
viewtopic.php?t=143620

(read it a couple of times, it will take some time to digest)

Proper reset sequence: The reset button has these functions: Hold this button during boot time until the user LED light starts flashing, and release the button to reset the RouterOS configuration. Keep holding the button for 5 more seconds or until the user LED turns off, then release it to make the...

To do what ?

Side comment: personally I would increase lease times on some of those DHCP parts. 10m is too short for most (and it will cause unnecessary writes to flash each time a new lease is handed out) Guest wifi could be relatively shorter (1h), rest I would put at 4h, even 1d. On your RB4011-config (I was ...

A couple of misinterpretations on CAP config: /interface bridge add admin-mac=*** auto-mac=no comment=defconf name=bridgeLocal /interface wifi datapath add bridge=bridgeLocal comment=defconf disabled=no name=capdp ====ADD === /interface vlan add interface=bridgeLocal name=VLAN99 vlan-id=99 /interfac...

No tag bridgelocal needed.
Cap also needs to listen to vlan99 interface.

Interface

Your port 10 is tagged vlan 99?
Then you need to add vlan 99 itf to bridge on cap.
Don't enable vlan filtering.
And set listen itf for cap to vlan99.
Then it should work.

In my setup: Router: normal VLAN setup (see for reference excellent guide from pcunite). Cap: added VLAN itf to bridge with pvid of mgmt vlan. Set cap to listen to this VLAN-itf for controller. And that was all. No VLAN filtering activated, no ports defined, nada. When you have a hybrid VLAN setup (...

Not really.
Never use webfig, only winbox ( direct or via Romon).

Why ranges ? Every time the AP changes frequency (because you allow it), you will loose connection. I always set my frequencies fixed (after planning and scanning of the environment, either manually, either through provisioning) Can you enable wireless debugging, it will show you more info on what's...

Configured an AX2 with your settings for local 5GHz on wifi1. Laptop connected to it using wifi5-card. It shows 802.11ac (in one of your last screenshots I saw 802.11n being mentioned ??) No issues. No disconnects (with connection to Azure Remote Desktop I would know immediately if it disconnects, e...

You only changed that frequency setting ?
I am going to load your config up on a spare AX2.

This is turning into a monologue ... I think I am going to close the door.

Fuzzy explanation ...

More info needed on the complete context of the setup.
What is located where ?
And what are you trying to do ?

Tip:
Check allowed addresses in peer settings.
Most likely your problem is there.

Probably because you only have a path for 0.0.0.0/0 to gateway of VDSL and Coax with each having their distance and no specific path towards your Coax gateway (or VDSL gateway). Just guessing since you did not provide any further info. Distance makes sure the first one which gets found for the same ...

Ok, then we change focus...
I see you use frequency ranges. What if you set a specific frequency ?

If you want to do routing between ports of different pvid, the bridge needs to know about each of them.
If not, it passes simply by since the bridge can not " read" the packets.

That's my probably too simplistic understanding.

Whenever you change firewall rules, clear conntrack table or reboot router.
Then you will see the new situation being applied.

Check help pages.

Don't believe me.
I have a working setup (multiple).

Watched the video, it's the one from Mikrotik ?
I stand corrected then.

But...
There is a section there which mentions provisioning.
You missed that part ?
Even for 1 cap you need to do that.

In your case, I advise using dynamic enabled

Yes, that's what I am referring to. CAP you set in caps mode and done. Nothing else to be done there (assuming it's AX device and everything is running wave2 drivers). Capsman, there you set the configs for the cap to be applied. If you use a device having own wireless interfaces as capsman, you nee...

Why use capsman if you set the interfaces manually ???

Definitely not default config. Focusing on the wifi part since that's the part giving you the most trouble. Where does this block come from ? Manual setting ? add channel.band=5ghz-ax .frequency=5500-5560 .skip-dfs-channels=10min-cac \ .width=20/40/80mhz configuration.country="United Kingdom&qu...

Post your config please.
controller and cap.

Up til now we never saw it.

And still we never saw that config ...

Maybe @holvoetn can sharw config, if im not wrong he have ax2 as CAP. At home I have capsman setup with RB5009, 1 AX2 and 1 AX3. I have a couple of AX2 standalone with a customer (running just nicely) and I also have capsman setup with RB5009, 11 cAP AX, 3 AX3 and 1 AX Lite. Also running as smooth ...

Post your config please.
controller and cap.

Up til now we never saw it.

Already launched a support ticket about it ?
What was the response ?

Why ?
The discussion on itself remains civil.
People can agree to disagree.

Thread locked.
Please continue in the other one

I never ran into a wall either.
I know it will hurt ... don't need to do that to know it.

Drop the youtube video (since clearly it's not working) and use this guide.

viewtopic.php?t=143620

TIp: most likely there are some firewall rules to be corrected.

Nearest possible solution would be hap AC2. Drawback: old wifi drivers. With 7.13beta channel it is possible however to load the wifiwave2 drivers on it but space is a problem on that device, not much left for other things then like e.g. zerotier. If you want to move to AX wifi, then it immediately ...

@mkx Believers will keep on believing. I have the impression someone is not willing to listen to reason because of tunnel vision. My personal view not affected by any AI tool ... Besides, if I ask ChatGPT itself, this is what I get. So who to believe??? :lol: Will chatgpt be able to write a perfect ...

Or it was a real quiet weekend ...

Native language Dutch (Belgium, northern part)
Fluent in English and French
Notions of German.

You're looking at the wrong page.
So you did not read the release notes for 7.13beta.

https://help.mikrotik.com/docs/display/ROS/WiFi

Yup

7.13beta

Which older devices can not use anyhow...

What IP address did your PC get ?
Could be it should be 192.168.88.1 for accessing the router (though user manual does mention 192.168.188.1).

If your APs are going to run wave2 drivers, obviously the controller will have to do so as well. And there I am not so sure it can be done on RB750r2 ... it is a rather limited device, resource wise. Processorwise it will be possible but I'm not sure about storage or RAM. You'll have to test. Again:...

Until 7.12, wifiwave was not supported on a lot of devices. With 7.13beta this had changed and your wap devices are supported, if I recall correctly. This requires replacing stock wireless package with new qcom-ac package. And then roaming will work. But... beta. So use at your own risk or wait for ...

Looks like the device already has been used ?

Factory reset.
If that doesn't work, netinstall.

What security settings do you have on 2ghz channel ?

Some old devices only want as low as WPA.

Netinstall

Unless i am mistaking
Subnet is L3.
Vlan is L2.

While not common, you CAN have multiple subnets in 1 VLAN.
Vlan is virtually a cable so l2.

My take: if you put IoT devices on their own vlan and they want to create havoc within that subnet, let them. They will not be able to get to the rest of your network (if properly firewalled). If needed, you can segregate further and put each device in its own VLAN (solitary confinement, poor things...

Ok Anav.
Eagerly awaiting your version then ...
Let's see if it is better.

FWIW the PCC youtube vid made by MT is quite good. https://www.youtube.com/watch?v=nlb7XAv57tw Used it again to clean up an AC3 LTE setup for PCC sharing across VDSL and LTE. Only, THIS time I disabled the subtitles which all of a sudden made me see a couple of important things I missed the previous...

VLAN combined with proper firewall rules, yes.

Caveat
One of your requirements is about isolation of wireless clients.
What APs are in use and what control do you have there ?
Because if the acces point can not block it, no way you can prevent it from happening.

I think you may have to start to study this excellent guide on setting up VLANs. A lot of stuff will become more clear then on how to proceed. https://forum.mikrotik.com/viewtopic.php?t=143620 (read, let it sink in, reread again, digest it more, test setup, read again) High level I don't see immedia...

So you're trying to add cAP XL ac to capsman controller running on AC2.
Correct ?

AC2 is running which version ? And which packages on it ?
cAP XL ac is running which version ? And which packages on it ?

Winbox has nothing to do with memory leak on my test RB951 running 7.13Beta2 (since Winbox was not in use). Here you see memory usage last 2 days. Stange it increments in the same amount, but not at a fixed time. Span on every sample is 5 min, . memory.png Must be something new for 7.13b2/3 ?? My R...

When cable is not connected, interface will not work.

As soon as it is connected, the DHCP client will make sure to get an IP address from the router upstream.
And it should then also provide a route and DNS settings for internet access to work.

i.e. To me it was not clear that after the upgrade and the installation off the qcom-ac package I have to reconfigure my wifi and under which menu tab I had to do that. Personal comment: when you add wifiwave2 package to AC3 (pre-7.13 chain), you would have to do the exact same thing. Old wireless ...

Can't say I'm seeing this.
I have 1 AC2 installed since 14/11 with 7.13b1 (because I was really eager to test the new wifi package), hasn't been reboot since.

Supout and support, I would say...

Without further information on context and setup, the answer is going to be rather generic too.

Use MAC address and static DHCP lease to hand out IP address to the relevant device ?

Cap ac to cap ac, it is possible but you still would need to correct MAC addresses etc...

If you have multiple, why not use capsman so the caps device can be simply reset to caps mode and you're done ?
That's the whole idea of capsman.

Simple AP config with external router. Connect to device using winbox MAC address remove dhcp server from bridge remove dhcp client from ether1 add ether 1 to bridge add static ip address to bridge add route 0.0.0.0/0 to your router add DNS settings (typically that would be your router) That should ...

hAP AX2 7.13_Beta2 When I add channel to the WiFi menu with show coloums channel dissapears when I reopen the WiFi tab as follows below, also there are two instances in the show colums box. I think this might be a winbox thing. I'm seeing it as well on a brand new AX2, still running 7.8. (although ...

Why not ?
A reported bug is a reported bug. Doesn't matter where it comes from.

Not realy sure if i became stupid or i don't understand something.

... What am i doing wrong?

If i upload old Wireless package back again, it installs normaly and i can see my Wifi interfaces.

Probably not enough space for the new wifi package ?

Export config
Netinstall
Import config

As indicated in other thread, use correct country settings.

Yes, that's a consequence from Mikrotik observing quite strictly country settings (as everyone should but some manufacturers are quite a bit less obeying).

And if you set country correctly as it should be ?

DFS detection, perhaps ?
Normally it should move to another frequency on its own.
(but maybe it got confused because it thinks it is in Canada

)

Can you downgrade to 7.13b1 to test again with auto ?

Q: why do you use Canadian country settings when you are based in Kiev ?

Added: you left 5GHz channel selection to auto.
What if you do specify a frequency (pick one preferably not in DFS range) ?

Can you also provide on AX2 output for
/interface wifiwave2 radio reg-info country=Canada number=0

I have the exact same setup at home which I use for testing as well before moving to production devices on my clients network. For now still on 7.13b1, everything working smooth using VLANs and everything. Is something mentioned in log file of AX2 ? I ask because I saw someone mentioning a problem w...

SAFE MODE will be your friend when testing/configuring.
https://help.mikrotik.com/docs/display/ ... %2B%5BD%5D.

1- can you make a drawing how everything is connected because it's not clear to me ... 2- Since you changed base vlan (pvid=1) for that cap AX (I think ? Hence my question for a more clear picture), on cap ax you need to add VLAN133 interface as part of bridge. Don't enable VLAN filtering. Set DHCP ...

On router Chateau 5g will i be able to use the new wifi and zerotier at the same time? I am using it at home and purchased as "future proof". Am I facing a replacement? Alternatively to what model? A device with 16Mb of flash does not really fit my definition of future proof ... FWIW I fa...

Please post actual config for both controller and cap.
Most likely you added something manually on cap, which depending on how you did provisioning, will take preference over config coming from controller.

Quickset setups for this specific version are rather limited, I agree (as for most AX devices). Then again, I never use Quickset :D But make no mistake, this is a rather powerful device for it's price range ! And all the goodies you get with ROS, make you can do an incredible amount of things where ...

Correct. Because of the way routing and distance works. Routing engine will try to find where to send a packet to, if multiple options are present (in this case for 0.0.0.0/0) , the one with the lowest distance will be taken. If an interface is not usable, it will simply not be used by routing. So n...

You will always run into situations where a client device is responsible for slow speeds.
Nothing you can do about it (unless you can also sell them a new phone

)

Adding:
RB4011 also has the added (possible) complexity of 2 switch chips.

My advise would also be to move to RB5009.

Adding another argument why it should NOT be mentioned:
if for one reason or the other pihole decides to change that admin entry ... MT (and everyone else referencing PiHole) should adapt their documentation as well ?
I don't think so.

MT stuff stays with MT.
PH stuff stays with PH

I don't think Quickset will help here. Not much to choose from. Config to be changed: - remove ether1 from bridge - remove ether1 from LAN and add to WAN interface list - add DHCP client to ether1, set distance to lower value then LTE (check APN settings) And that should be it. When ether1 is not co...

1 -I hope you did not restore a binary backup instead of importing config manually ? If so, you put the ballast simply back. 2- AC3 LTE is known for having a real tight storage space. Mine only as 346K left (recently upgraded to ROS 7.12). But it runs stable as a rock. I don't keep backups on that d...

If a DFS channel is used, it can take up to 15 minutes before it comes back.

What android phone ?

Can you use laptop for testing ? Anything else with wireless capabilities ?

Can you please answer ??
What device do you use for testing ?

Even only on 2.4GHz, you should see close to or over 100Mb on AC2.
Heck, I get close to 90Mb using a stupid mAP (and there the ethernet port is the bottleneck) !

What device do you use to test then ? Because even on AC2 you get really LOW speeds, considering you test on internal network. Should be around 400Mb at least, when using 5GHz. What if you attach computer using cable to AX Lite, cable from AX Lite to your network. Then speed test. Ideally I would li...

I don't see a channel/frequency being defined so it's auto. Never use auto for maximum results... select the channel yourself. What device do you use to test ? Can it take advantage of AX wifi ? And where do you test to ? External speedtest server ? Best to use an internal server (then you _know_ wh...

updated a CCR2004 to 7.13beta1. Moved some hapac2 w/ wifi-qcom-ac package over to the new "WiFi capsman". The remaining devices lost connection to old capsman v1. Is it not possible to have both capsman versions running on the same device? I don't see any other reason why capsmanv1 should...

Odd ... I can get around 400Mb on mine (tested from laptop on AX Lite, wireless to AX3, then towards internal iperf3 server). https://forum.mikrotik.com/viewtopic.php?p=994027#p994027 Are you sure you selected a channel which is as free as possible from other radios ? (in 2.4GHz range it will be har...

Yes, I now see the CAP in CAPSMAN but for some reason the configuration isn't applied. Do I need to define separate configuration for AC and AX?

If your provisioning rules are specific enough so it ends up only using AX, yes you need new rules for AC.

Can someone please shed some light how to make CAPSMAN work with wifi-qcom-ac? I have a wAP AC (the supported version), I installed 7.13b1 on it and it shows up on my CAPSMAN controller (RB4011 with manually installed wifiwave2 package, already managing 2 hap ax2-s) but I cannot provision the CAP a...

So when 7.12 with installed wifiwave2 package gets upgraded to 7.13beta1 (or newer), wifi-qcom (or wifi-qcom-ac) package replaces the previously installed wifiwave2 package. I noticed an important difference on AC2 (no previous wifiwave2). Wireless was there after upgrade, not qcom-ac (and yes, I D...

Okay, I updated ax3 to 7.13beta1, only ROS package, nothing else, do I need to install another package or what ? Does it work ? On my AX3 (and AX2) I see ros package and wifi-qcom. I didn't do anything but check for upgrades and hit 'the' button. But when did you do that upgrade ? Because there is ...

@Jotne: The way I understand it: upgrade to 7.13 chain unbundled wireless from the core ROS package. That's why you see it being mentioned again (it was also like that in older ROS6 versions). And you DO need that package or your wireless radios will not work anymore (I think but easy to test). Wifi...

Wishlist: At least 24 switch ports with 1 Gbit/s, connected with the patch panel, going to the rooms and three APs The APs should support WiFi Roaming I want to have several VLANS for the internal home network, guest, IOT devices... I need some VLAN routing, so that e.g. my Smartphone from home VLA...

MT support does not frequent this forum that much. It is mostly a USER forum.

Try contacting support directly via support@mikrotik.com.
Make sure to have a COMPLETE description of your network, what setup you made, what you see failing.
And for all involved Mikrotik devices, provide supout.rif.

qcom-ac package does not work on mipsbe. Only arm.

https://help.mikrotik.com/docs/display/ ... ss'package

As a rule of thumb, the package is compatible with 802.11ac producs, which have an ARM CPU.

@strods or @normis:
I do have one question which is not mentioned in the docs (or not clear enough):
hAP ac^3, does that also include LTE version ?

If you install wireless and wifi packages at the same time, then of course there are two menus. You can run both of them at the same time as separate solutions on a single router. Wireless package and wifi package can be installed on a router at the same time, but one of them will be disabled. Both...

@normis: That conclusion I made already on my previous post. As a consequence everything needs to be reconfigured for a device where you do that replacement (and that "replacement" part is in the documentation, so that's clear). Fully understandable reconfiguring is needed, no mistake ther...

OK, now I see. Still need to get used to the new naming style. But I wasn't able to use the Wifi part for the radios on AC2 until I uninstalled wireless package. And only then was I able to install qcom-ac and then I could configure radios under the new settings. So running both on same device doesn...

Why isn't there a way like "dir /s" in Windows to easily check what's taking up space in memory - and do that via the console?

Because it is ROS, not WIndows, not Linux, not OS2, ...

Upgrade AC2.
At first I thought wireless settings were not transferred, but then I noticed there are 2 references in the menu: wifi and wireless.
It's there under wireless /wireless (there is also wireless/capsman).
Confusing !

I don't do the 2nd reboot but I do set Auto Update for firmware. - either a power loss/recovery will take care of reboot at which point firmware will be in line with ROS. Doesn't happen that often around here. - either a next install will take care of reboot (and then device will remain 1 version be...

There is nothing you can do if a device draws too much power from RB5009 except for inserting a power injector to protect that RB5009 from being taken down.

It seems the wireguard is broken , can't connect to anywhere .

3 different ones on 1 RB5009 working just fine here.

Capsman works fine in my case, vlans and everything
on the v7.13?

Yes.

Read user manual.
It's in there.

Just upgrade in testing channel.

Read the sticker on the little hidden tab on the back.

It contains something called... password.

OK, then we can mark that one off.

Cat5e cable should not be the problem.
Already tried another cable ?

How long is that cat5e cable you used now ?

Stupid question perhaps but did you also attach the power brick to the injector ?

Last part first
Because ROS is based on Linux but it is not as open as Linux.
No way to peek into the internal kitchen.

First part
A little search perhaps ?

https://help.mikrotik.com/docs/display/ROS/Netinstall
and
viewtopic.php?t=182373
Paragraph H

For cap ax to work as cap device, you need wifiwave2 package on the controller acting as capsman. Without it, it will never work. No other combinations possible. Install wifiwave2 package on rb, do your config, then export for review. Because up till now, we haven't seen anything from you ( screensh...

Then I guess it's time for netinstall.
It's clear something is eating that storage space...

Xmas is early this year

WHATTTT ??

Wifiwave2 compatibility for AC2, cap AC, cap XL AC, ... ???
Do I understand that correctly ?

Or is it only bringing everything in one menu structure ? Old and new wifi remain incompatible ?
Please ? Let it be the first option ...

Are you sure it's not because the slot name of USB disk changes after reboot ?

If you use capsman, don't touch those wifi interfaces.
It will come through capsman.

Again, that's the whole point of using capsman.

Quick question:

what's this ?
/ip pool
add name=dhcp ranges=192.168.0.10-192.168.88.254

That's quite a BIG range for a DHCP pool ... and possibly the cause of your problem.

Use provisioning rule with mac address of radio to be isolated.

What type of router ?
Have you tried to move the backup files to your computer to make space ? (drag-n-drop to computer, verify its there, then delete in Files)
Which version are you running now and to which version do you want to upgrade ?

I have 2 Rb5009 running. Apart from reboot because of upgrade or power loss, they never get rebooted.
Never.

A big +1 on previous remark. NEVER import binary backup into another router having different HW. (Even for same HW, it is not really advised IMHO since you will also copy MAC addresses over causing possible problems on your network if both devices remain active). If you already imported that binary ...

It also looks to me (viewing your screenshot) you did some config on that cap AX (because if it has no connection, who changed the name of the wifi interfaces then ?). It is not needed. Simply reset to caps mode and that's it (that's the point of cap device, plug in and it should work). Unless you u...

No problem on RB5009.
Advertises 1Gb just nicely.

Start a new thread and post network diagram and config of relevant devices.

Anything being mentioned in log ?

Nope.
Just let it be.

Me too with my question regarding config.

Search found 4682 matches