Community discussions

MikroTik App

Search found 8 matches

by jonmill
Thu Apr 22, 2021 12:32 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

That's unfortunate...does anyone else have any ideas?

Thanks for your help anav!
by jonmill
Fri Apr 16, 2021 11:51 pm
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

Correct - I'm using a phone on 4G (WiFi fully disabled) to both port-scan and connect. The port-scanner shows that the ports are open but no connections are established and no counters are incremented in the router dashboard, showing that no packets are flowing through my dst-nat rules...I'm at a loss
by jonmill
Fri Apr 16, 2021 8:38 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

My full config (minus sensitive) is below. My router is directly connected to my modem and has a public IP (verified by checking the DHCP Client IP against external requests source IPs). My routing table has 3 routes: 1) DAS Dst Address : 0.0.0.0/0 Gateway (external IP here) reachable ether1 Distanc...
by jonmill
Fri Apr 16, 2021 8:38 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

My full config (minus sensitive) is below. My router is directly connected to my modem and has a public IP (verified by checking the DHCP Client IP against external requests source IPs). My routing table has 3 routes: 1) DAS Dst Address : 0.0.0.0/0 Gateway (external IP here) reachable ether1 Distanc...
by jonmill
Fri Apr 16, 2021 2:45 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

I don't have any routing rules setup specifically...I've never had a problem and internal traffic works fine; that and the DST-NAT specifies the destination IP address through the bridge. What do I need to add to the routing table? I turned UPNP off I added the router (192.168.1.1) and CloudFlare (1...
by jonmill
Thu Apr 15, 2021 4:42 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

Meaning I can access the server locally using the internal IP address but external access does not increment the Packet Counters and does not connect. Port scanning, however, does show the ports as open...so it looks like the packet is being dropped or not routed correctly. Any ideas?
by jonmill
Thu Apr 15, 2021 3:29 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

Re: DST-NAT not opening port

Thanks for the info - I've fixed the issues you mentioned (thanks for pointing out the additional issues, I appreciate it) and the ports are open but external traffic doesn't seem to be routing there properly. Internal traffic is routed just fine, but external requests don't make it (tested via a ph...
by jonmill
Wed Apr 14, 2021 3:34 am
Forum: Beginner Basics
Topic: DST-NAT not opening port
Replies: 14
Views: 1168

DST-NAT not opening port

Hi - I'm trying to open a couple of ports and have looked at the forum / documentation here, followed the previous advice, but the port is still not open. I'm on a MikroTik hEX S and I know my ISP is not blocking the ports since it worked on my old Ubiquiti router. I'm trying to open (to start) port...