Community discussions

MikroTik App

Search found 25 matches

by murray654
Fri Jan 03, 2014 12:14 pm
Forum: The User Manager
Topic: unable to access userman
Replies: 1
Views: 882

Re: unable to access userman

what device?

Mine is RB750 - Reboot gets everything working, but after a short time its not working again. I opened my own thread.
by murray654
Fri Jan 03, 2014 11:00 am
Forum: The User Manager
Topic: usermanager failed to open
Replies: 0
Views: 713

usermanager failed to open

Hi, I cant load the usermanager web portal. If I reboot it works, sometime for 5 minutes, sometimes for 30 minutes. But eventually I get kicked out - sync failure or something. Then the page just does not load in any browser. I still have access in winbox. RB750 Routeros 6.7 Memory 5.1MiB CPU:0-3% D...
by murray654
Sun Mar 24, 2013 10:36 pm
Forum: Scripting
Topic: enable / disable radio script
Replies: 27
Views: 36267

Re: enable / disable radio script

Base122's script was tested on v5.19... that might be the problem, might not. Sometimes syntax changes between versions. I noticed that the following line errors out for me on v5.22 because the "status" option does not exist (no info about it on the wiki ). I wonder if the separate NTP package is b...
by murray654
Fri Mar 22, 2013 6:55 pm
Forum: Scripting
Topic: enable / disable radio script
Replies: 27
Views: 36267

Re: enable / disable radio script

Had a requirement to set the wireless radio on a RB751U to switch on and off at certain times. E.g. On during business hours only (07:00 - 17:00) I tried this and it does not work. I get "Radio name = wlan1" in the log then nothing. Any packages I need to get this to work? my version is 5.14 and th...
by murray654
Wed Dec 19, 2012 11:49 am
Forum: Scripting
Topic: Solution: Automatically clean expired User-Manager accounts
Replies: 72
Views: 50141

Re: Solution: Automatically clean expired User-Manager accou

Hi

I used this script before, but now it just says:

"
...
1419 xh9p6u

1420
interrupted
input does not match any value of value-name"

My routeros version is 5.7 on rb750

Any way to fix this? Any other solutions?
by murray654
Thu Feb 23, 2012 6:27 pm
Forum: The User Manager
Topic: WiFree service
Replies: 2
Views: 1448

WiFree service

Is mikrotik usermanager protected from Wi-Free ( a service which routes traffic through dns and icmp protocol ) ?

Wi-Free Website
by murray654
Fri Sep 23, 2011 5:00 pm
Forum: The User Manager
Topic: IE9 breaks my voucher template
Replies: 1
Views: 982

IE9 breaks my voucher template

Hi I have a custom voucher template, but I never changed the templates "page break" or "header" fields. I inserted my custom code in "Row" I am having a problem with IE9 when I print vouchers. IE9 ignores the page break - There is no page break displayed on the screen and when you print, the page br...
by murray654
Fri Sep 23, 2011 1:59 pm
Forum: General
Topic: RouterOS v5.7 released
Replies: 227
Views: 71872

Re: RouterOS v5.7 released

[Ticket#2011082066000161] memory is full

problem continues on all SXT with active OSPF
weekly.gif
yesterday 22 sept I had 5mib free RAM

23 Sept 13h59 I have 4mib free
23 Sept 17h24 I have 3.5mib free RAM

Pattern is as time passes more RAM used, less RAM free.

My router is the RB750.
by murray654
Wed Sep 21, 2011 6:34 pm
Forum: The User Manager
Topic: CPU 100% userman 5.5
Replies: 6
Views: 1835

Re: CPU 100% userman 5.5

me too .. after upgrade from 4.16 to 5.6 version my rb cpu get 100% :shock: ... pleaseeee help us ... ~_~ ... :( after my experience: I cleaned up my database before upgrading... to 5.7 Everything went smoothly. I think the users even transfered correctly. So far it seems to work great - cant wait ...
by murray654
Fri Sep 09, 2011 4:14 pm
Forum: The User Manager
Topic: POST VOUCHER TEMPLATES HERE
Replies: 19
Views: 62922

Re: POST VOUCHER TEMPLATES HERE

Hi I need to print users uptime limit on the voucher. This constant (found in wiki) does not work: %u_limitUptime% (the text is not replaced when generating vouchers) How do I print the uptime limit? Thanks in advance. Oh, my version of routeros is 4.17 and my router is RB750 Cheers, Murray OK I go...
by murray654
Fri Sep 09, 2011 4:08 pm
Forum: The User Manager
Topic: POST VOUCHER TEMPLATES HERE
Replies: 19
Views: 62922

Re: POST VOUCHER TEMPLATES HERE

Hi

I need to print users uptime limit on the voucher.

This constant (found in wiki) does not work: %u_limitUptime% (the text is not replaced when generating vouchers)

How do I print the uptime limit?

Thanks in advance.

Oh, my version of routeros is 4.17 and my router is RB750

Cheers,

Murray
by murray654
Wed Sep 07, 2011 9:40 pm
Forum: The User Manager
Topic: CPU 100% userman 5.5
Replies: 6
Views: 1835

Re: CPU 100% userman 5.5

Please share - how you fixed it.

I have the same problem, but with 5.6
by murray654
Sat Feb 19, 2011 1:01 pm
Forum: RouterBOARD hardware
Topic: Autonegotiation failure after ROS upgrade
Replies: 7
Views: 1604

Re: Autonegotiation failure after ROS upgrade

This morning the WAN interface reports an error. I can get it working if I disable the interface and enable it. This is not ideal, so: Downgraded to 4.11 and everything seems to work including autonegotiating 100mbps full duplex. From other posts it would seem that the 1A power supply is required, ...
by murray654
Sat Feb 05, 2011 10:03 am
Forum: The User Manager
Topic: hotspot for office
Replies: 5
Views: 1341

Re: hotspot for office

Yes, 'walled-garden ip' could be used to allow communications between local clients. Hi I should have mentioned that this is a wired network. Does it make any difference? Clients (Office) --- UTP Cable ---- Switch --- UTP Cable --- RB750 --- UTP Cable --- Wireless CPE --- Internet Surely, the clien...
by murray654
Tue Feb 01, 2011 12:28 pm
Forum: General
Topic: Norton Safety Minder causes browser to freeze
Replies: 10
Views: 1808

Re: Norton Safety Minder causes browser to freeze

Now after a few days without trouble, the 2 computers with Norton Safety minder which are on the hotspot interface have the Browser Freeze problem. After disabling the Norton Safety Minder I get the error "Alert: The URL is not valid and can not be loaded." The 3rd computer with the Norton software ...
by murray654
Tue Feb 01, 2011 12:19 pm
Forum: The User Manager
Topic: hotspot for office
Replies: 5
Views: 1341

hotspot for office

Hi, Current setup: Interface 1 - WAN Internet Interface 2 - Office - some workstations have internet manually enabled in the firewall - stations can contact each other - Problem is that these stations are abused when management is not in the office. Interface 3 - Public AP - hotspot running - statio...
by murray654
Fri Jan 21, 2011 3:09 pm
Forum: General
Topic: Norton Safety Minder causes browser to freeze
Replies: 10
Views: 1808

Re: Norton Safety Minder causes browser to freeze

I see KatieQ answered your question on the Norton forum. These are the URLs she recommended bypassing with the walled garden: onlinefamily.norton.com o2comm.norton.com Yes, I have inserted norton.com (this will allow both of the above) I also inserted cavern.co.za (my router internal address is in ...
by murray654
Sat Jan 15, 2011 3:57 pm
Forum: General
Topic: Norton Safety Minder causes browser to freeze
Replies: 10
Views: 1808

Re: Norton Safety Minder causes browser to freeze

You might want to try either bypassing the computer with the Norton program on it (easier), or allow access to Norton through the walled-garden. It is probably locking up because of the hotspot redirect. /ip hotspot ip-binding add mac-address=xx:xx:xx:xx:xx:xx type=bypassed For now Norton Safety Mi...
by murray654
Sat Jan 15, 2011 3:10 pm
Forum: General
Topic: Norton Safety Minder causes browser to freeze
Replies: 10
Views: 1808

Re: Norton Safety Minder causes browser to freeze

what browser are you using?
Both IE and firefox. Both freeze. its definately not the browser.
by murray654
Sat Jan 15, 2011 3:06 pm
Forum: RouterBOARD hardware
Topic: Autonegotiation failure after ROS upgrade
Replies: 7
Views: 1604

Re: Autonegotiation failure after ROS upgrade

I've had no issues with original 500ma PSU on any of my RB750 (2nd version, with silk screen for USB). ROS4.5, 4.10, 4.11. Just out of interest, how many ports are in use? I have all 5 ports in use - the autonegotiation failure only happens on the WAN port (Eth1) I suspect that the more devices con...
by murray654
Sat Jan 15, 2011 2:53 pm
Forum: General
Topic: Norton Safety Minder causes browser to freeze
Replies: 10
Views: 1808

Norton Safety Minder causes browser to freeze

Hi I have a RB750 with RouterOS v4.11 Port 1 is WAN, Port 2 is our office, Port 3 is our Lounge AP, Port 4 is our 3G router for redundancy, and Port 5 is another AP in another area. I have Bridged port 3 & 5, and hotspot is set to run on this "hs-bridge" guests are able to use the internet after log...
by murray654
Tue Dec 28, 2010 8:27 am
Forum: RouterBOARD hardware
Topic: Autonegotiation failure after ROS upgrade
Replies: 7
Views: 1604

Re: Autonegotiation failure after ROS upgrade

I've had no issues with original 500ma PSU on any of my RB750 (2nd version, with silk screen for USB). ROS4.5, 4.10, 4.11. Hi rmichael, I only had issues when I upgraded to 4.14 and 4.16 I downgraded to 4.11 and its fine -been up for 22 hours no problems (on the 500mA power supply). Edit: after 23h...
by murray654
Mon Dec 27, 2010 12:36 pm
Forum: RouterBOARD hardware
Topic: Autonegotiation failure after ROS upgrade
Replies: 7
Views: 1604

Re: Autonegotiation failure after ROS upgrade

This morning the WAN interface reports an error. I can get it working if I disable the interface and enable it. This is not ideal, so: Downgraded to 4.11 and everything seems to work including autonegotiating 100mbps full duplex. From other posts it would seem that the 1A power supply is required, e...
by murray654
Sat Dec 25, 2010 11:18 am
Forum: RouterBOARD hardware
Topic: Autonegotiation failure after ROS upgrade
Replies: 7
Views: 1604

Re: Autonegotiation failure after ROS upgrade

What power supply are you using? The RB750 was supplied with a 12v 500mA power supply in the packaging. The RB411 is a CPE owned by the ISP: The RB411 has a 12v 0.8A power supply which is probably supplied seperately. It also has a PoE injector so the power is supplied to the Eternet port. I had th...
by murray654
Fri Dec 17, 2010 10:59 am
Forum: RouterBOARD hardware
Topic: Autonegotiation failure after ROS upgrade
Replies: 7
Views: 1604

Autonegotiation failure after ROS upgrade

Hi, I had 1x RB750 (v4.11) connecting port 1 to RB411 (v3.23) There is a digital timer which switches off the power for some switches and the RB750 for 15 minutes at 03h00 After the power resumed everything was working again. I upgraded both to v4.14 Since the upgrade, when the power resumes there i...