MikroTik

YUJOBIKA

Anyone can help me build script for Mikrotik ? The scenario is simple, but I really don't know about script. Here the scenario: If ARP for ethernet name not contain words "ether-backbone" and "ether-mainlink" and total ARP at those ethernet less than 3 IPs, Mikrotik will send ema...

YUJOBIKA

Hi, anyone have script for detecting conflict IP in OSPF LSA table ?

If there are "same ID" with "different Originator", I want Mikrotik send email to me.
This will be useful for OSPF network, so there will be no conflict IP in the network.

YUJOBIKA

My network using OSPF for redistribute default gateway. I need to route some clients to use other gateway. What I can do is using static route or routing mark, but I want to use dynamic routing protocol to do this job. Anybody know how to route some clients to use other gateway with Routing Filter (...

YUJOBIKA

chechito, sure I did connect to powerline for both of them

YUJOBIKA

I have CCR1009-8G-1S-1S+ using v6.26. Please help why PSU-2 State is Failed ?
Is this hardware damage or software damage ? How to repair it ?

Screenshot (36).png

YUJOBIKA

ping to self is not a diagnostics method. traffic could be slow because of traffic source. Usually ping to itself is a way for troubleshoot. I was using x86 Xeon before, and just try CCR16 for two weeks. With x86, ping to itself always 0ms, even with CPU load above 50%. Also I have RB1100AH with CP...

YUJOBIKA

What happened with CCR1016-12G ? Is there anyone can help me please ?
CPU load below 40%, but my throughput so small because ping to 127.0.0.1 (itself) is bad

bad--ccr16.jpg

YUJOBIKA

Anyone can help my issue, please ?

YUJOBIKA

Dear All, Please see my picture. Is it possible to force traffic that outbound from Office1 via RB1100B, and inbound to RB1100B ? My problem is: why some traffic that outbound from Office1 via RB1100B, inbound through RB1100C===Office1. So I have overload link between Office1 and Office2 because of ...

YUJOBIKA

you cannot make all trafic come from one ISP with BGP even with PREPEND i am wondering if you are not speaking allso for outbound trafic because in your picture we can see same metric and local-pref ( 0 and 70 ) so you must also modify local-pref to send traffic through correct ISP ( highest number...

YUJOBIKA

Telia side is good no prepend x.x.4.0/24 *[BGP/170] 2d 07:12:08, localpref 200, from 213.248.80.240 AS path: xxx47 xxx02 xxx33 I to 213.155.131.136 via ae6.0 > to 213.155.131.138 via ae9.0 GBLX is also good prepend 5 3491 4761 xxx52 xxx52 xxx86 xxx33 xxx33 xxx33 xxx33 xxx33, (received & used) g...

YUJOBIKA

What are showing the looking glass of Telia Sonera and Global Crossing from your AS announces Regards Thierry Thanks for your attention. From Global Crossing, prepend 5x still a winner. Here the result (ASxxx33 is mine): Route Server: route-server.gblx.net BGP routing table entry for x.x.4.0/24, ve...

YUJOBIKA

Here my route filter: /routing filter add action=accept chain=isp1-out disabled=no invert-match=no prefix=x.x.4.0/24 prefix-length=24 protocol=connect,static,bgp set-bgp-prepend-path="" add action=accept chain=isp2-out disabled=no invert-match=no prefix=x.x.4.0/24 prefix-length=24 protocol...

YUJOBIKA

Have you tried 6.0 beta2?

Just upgrade to 6 beta2. Yes it can detect i82578M. Great! !!

But I cannot use beta for reallive. I really hope Mikrotik Team can support i82578M in stable version....very soon

YUJOBIKA

Have you tried 6.0 beta2?

Using beta version is not recommend in our company policy

YUJOBIKA

Hi,

After almost 1 year, NIC i82578M still doesnot work on v5.18

When it will be supported? ????

Regards

YUJOBIKA

Hi, I have 2 ISP in 1 Mikrotik router: ISP A: Download 3 Mbps + Upload 3 Mbps ISP B: Download 3 Mbps + Upload 512 Kbps I want all uploading email (yahoo mail) going through ISP A. Because ISP B upload is so slow and can make congestion issue. While other traffic going through ISP A and B (using PCC ...

YUJOBIKA

Thanks fewi for your advice.
I had many heard Squid is the best. The problem (for me), I don't know how to configure Squid with multiple WAN

That is why, internal proxy from Mikrotik is in my plan.

YUJOBIKA

You mean it is because IO rate ?
If so, what about caching with SSD Intel X25-E which have fastest IO rate in this planet ?

Because the built in proxy is for small deployments. Disk IO is serial, for example. It's a router. Get a dedicated proxy.

YUJOBIKA

Hi, I am using ROS v5.0rc5 on X86, motherboard Intel S3200SH, Xeon Dual Core 3Ghz, 2GB RAM. Using 1GB USB Flash Disk for OS....and Hard Drive WD Caviar Blue 80GB (7500 RPM, SATA AHCI) as proxy cache. I had setup 30GB space for caching. When cached fill the space below 25GB, browsing speed was perfec...

YUJOBIKA

SSD is my choice so far.
But are u sure ROS support for SSD ?
Because I had read somewhere in forum, ROS did not support SSD.

YUJOBIKA

Hi, I am using ROS v5.0rc5 on X86 , motherboard Intel S3200SH, Xeon Dual Core 3Ghz, 2GB RAM. Using 1GB USB Flash Disk for OS. This router will serves arround 2000 PC clients (behind 175 NAT) . I want to add 1 store for web proxy. What is the FASTEST Disk/Hard Drive for Mikrotik Internal Proxy ? Rega...

YUJOBIKA

Mikrotik v5.0 RC5 cannot send email.
ROS on x86 + Core 2 Duo + RAM 2GB.

Which v5.x can send email ? I have to use send mail for my SLA monitoring.

mail.JPG

YUJOBIKA

Hi fewi, My reason because my Mikrotik Gateway serves 354 clients. I don't want to make its load more high than now (about 20%). I have tried my Mikrotik Gateway + internal Web Server, the result....minimum load was 75% :( And sometimes it reached 100%...then packet loss happend :( Is there any spec...

YUJOBIKA

Hi, Anyone had succeed building Mikrotik Bridge as Web Proxy ? I tried search whole forum and google, but nothing :( Since 3 years ago, I have a solid network like this: Clients ----- Mikrotik Gateway ----- Internet (4 WAN load balance). Now, I want to add web proxy in my network, so it will be like...

YUJOBIKA

YUJOBIKA, any success with openvpn connection to strongvpn.com ?

Hi, never success

So I am using normal VPN only.

YUJOBIKA

please see wiki.mikrotik.com for script example that pings and reports results. Yes, I already read wiki, but there are no script for counting how many percentage loss packets. Since more than a year ago, here script I am using. :if (([/ping x.x.x.x count=10 interval=1]<1) && ([/ping y.y.y....

YUJOBIKA

Hi, Anyone know how to make mikrotik as SLA Monitoring ? Ex: if 3 of 10 pings to Yahoo timeout, it will send email with subject "Yahoo loss 30%". if 5 of 10 pings to Yahoo timeout, it will send email with subject "Yahoo loss 50%". if 10 of 10 pings to Yahoo timeout, it will send ...

YUJOBIKA

Hmmm...so not only me have this problem.
I hope Mikrotik Team can solve this issue in the next version.

YUJOBIKA

Hi, Anyone can help me how to use regex in static dns ? Mine is ROS v3.30 I want to make regex for: 1) http://abc.xyz.domain.com/folder/ .....and all path beyond 2) match for www.domain2.com/ ..... and all path beyond, but doesn't want resolve www.abc.domain2.com Thanks in advanced for your help. Re...

YUJOBIKA

Thanks tgrand for you reply. I really appreciate

And yes, radio at AP side is broken.

YUJOBIKA

I already changed antenna, no luck

Already changed polarity V to H, no luck

Is it possible if the RX Sensitivity in AP side was damaged ? So AP could not hear Client clearly. Please advice.

YUJOBIKA

Hi, Is there any way to know which site have problem. At the beginning, this link was very solid (TX/RX CCQ 95%-100%), but suddenly the link drop very bad. Is the problem at AP site or Client site ? At AP site: Overall TX CCQ: 100 % ; Signal Strength -87dbm ; Noise Floor -106 dbm. At Client site: Ov...

YUJOBIKA

The most common IP conflict I experience is 192.168.88.1. Is that ip assigned to more than one interface in your setup? Check all ether1 interfaces on the RouterBoards. I am sure there are no same IP in my network. I always changed default IP from any device, before plug into my network. Anyway, th...

YUJOBIKA

Please anyone can help me ?

Thanks

YUJOBIKA

Hi, Please see my topology in picture topo.jpg Yesterday, mikrotik which act as Station Pseudobridge was hit by lightning. The wireless still connected, but I could not ping client's PC behind that mikrotik. The problem is, after that all of my network was down. And MY PC (windows) which connected t...

YUJOBIKA

@missinlnk Yesterday I sent supout file to them. Waiting with big hope for their answer about this issue. Thanks That's the 8 digit softid, which doesn't have the superchannel associated with it. And there's no entry in the old-software-id field, which is where your 7 digit softid w/ superchannel wo...

YUJOBIKA

@roc-noc.com /system license print software-id: "MDXC-QXXX" upgradable-to: v4.x nlevel: 4 features: And under my account, in my virtual folder, I could not find any OLD SoftID / Plan License. There only 1 SoftID like this: Soft ID:MDXC-QXXX Key: -----BEGIN MIKROTIK SOFTWARE KEY------------...

YUJOBIKA

@missinlnk I already login to Mikrotik site and able to export my ID. But after I pressed UPGRADE button, it said: Message This key already have full features! That means my license is full with superchannel, right ? But why in my router, I cannot use superchannel ? :( You can either go back to the ...

YUJOBIKA

@missinlnk Thanks for very fast reply :) Yes, it was 7 digit before I upgrade to ROS v4.x. How can I login to Mikrotik site ? I did not buy these license from that site. I bought from my local reseller in my country. Is there any other way to get back my old license ? Thanks Was your superchannel li...

YUJOBIKA

Hi, I am using DOM in x86 and also I bought superchannel license since 6 months ago. Then yesterday I tried to upgrade to ROS v4.6. But, this version have problem with my router. My wireless disconnected periodically. Then I downgrade again to ROS v3.30 and it is work good. But, now my router have N...

YUJOBIKA

sure if you have routed network, u must ask to your ISP to creat a route to your border router. Example Internet (isprouter)-------- Router ------ RBXX ))))) (((((( PC client in the isrouter they must add a route, ip route add xxx.xxx.xxx.xxx/yy via ROUTER_IP in your site, if u are goin to use a /3...

YUJOBIKA

Hi,

Is there any way to use Public IP in user's PC without bridging mode ?

Thanks

YUJOBIKA

Hi, I could not find any tutorial about Wireless Routing setup, which had topology as follow: Internet _____ RB411A (AP Bridge) ----- RB411A (Station) _____ PC client I do not want to use wireless bridging because of security reason. So I prefer to use wireless routing. And PC Client must be using P...

YUJOBIKA

Hi,

Anyone can help this issue please.

Regards

YUJOBIKA

Hi, I had 235 host in netwatch. I use it to monitor those host. No script inside netwatch. Netwatch said some host are DOWN, but I can ping those host via PING menu. And this happend intermitten. I use this since 2 years ago, never have this problem. Only today this problem made headache :( Anyone c...

YUJOBIKA

Chupaka, thanks for reply.
But I really in a dark room

I don't understand any linux script.
Would you please show me in detail, please ?

Thanks

seems like you need to parse ':local currentrate [/queue simple get queue1 rate]' variable to get needed rate

YUJOBIKA

Hi,

I am using Simple Queue.
Please help me to make script for this purpose:

- If queue1 TX Rate > 512k ... change queue2 Max Limit to 1M/1M
- If queue1 TX Rate < 512k ... change queue2 Max Limit to 2M/2M

Thanks in advance, and sorry for my bad English.

YUJOBIKA

Hi, I just noticed Mikrotik have feature for M3P. As I read in document, this M3P would increase VOIP quality over wireless link. My questions are: 1. Is it possible to combine NSTREAM + M3P to get good quality voip ? 2. How to configure M3P for VOIP or Small Packets ? 3. Is it only configure in &qu...

YUJOBIKA

This is very good question. I also want to hear feedback from others.
Please if anyone can support this post.

Thanks.

YUJOBIKA

Hi, /ip addr pr and /ip route pr seems normal. And also I "can" telnet into it using IP. Seems just port 8291 closed, but...I checked it already open. Anyway, my router generated autosupout.rif automatically & it sent to my email automatically. I will forward to support team. Thanks

YUJOBIKA

Hi, Suddenly I could not login with Winbox using IP, but...I can login using MAC Address. Is this only happen to me or happen to others too ? My machine: /system resource> pr uptime: 1d3h36m30s version: "3.25" free-memory: 1665596kB total-memory: 1945840kB cpu: "Intel(R)" cpu-cou...

YUJOBIKA

Grounding is xtremely good for more than 2 years.
Because I had a bad experience with ligthning.

I am using:
Grounding < 0.5 Ω
Cable BCC-50 with depth 40 Meters.

Regards

YUJOBIKA

Yes, I always limit "Proxy-Hit" to clients. 512 Kbps for each client. Because I don't want my wireless link overload.

I am using PCQ with rate 512 Kbps. But still...self reboot happen

YUJOBIKA

In v3.24 such problem "failed: Stale NFS file handle" is no more exist in my log. But....everyday...still... my Mikrotik reboot by its self if I use internal proxy. This self reboot also happen in v3.23. And yes, I did "check disk" after upgrade to v3.24. The process took about 1...

YUJOBIKA

Ok, thanks for your help.

YUJOBIKA

They already switch my OpenVPN to TCP port. Here files I got from them: ta.key ovpn007.ovpn ovpn007.key ovpn007.crt install-ovpn007.sh install-ovpn007.cmd ca.crt Then I open those files with notepad to see what inside. Here is inside those files: ta.key # # 2048 bit OpenVPN static key # -----BEGIN O...

YUJOBIKA

I am chatting with their support now. And he said can switch OpenVPN Server to TCP.
I will make new config now and will let you know soon.

Thanks

YUJOBIKA

I just earased all config yesterday. But I will make it again.

OpenVPN from strongvpn used UDP. Does Mikrotik support it ?
I use ROS v3.24.

Thanks

YUJOBIKA

Hi,

Anyone have tried to use Mikrotik as OpenVPN Client with OpenVPN Server from www.strongvpn.com ? I tried many times and Mikrotik could not connect to their server.

Please solve this.

Regards

YUJOBIKA

Mikrotik support reply as follow:

Hello Adam,

The problem should be fixed in the next 3.25 version.
At least I'm not able to reproduce it the same procedure as you provided us.

Regards,
Sergejs

YUJOBIKA

@Chupaka

Yes I activated routing-test because I need to try BGP.

Thanks

YUJOBIKA

I just sent email to Mikrotik. Hope will be solve in the next version.

Thanks

YUJOBIKA

Hi, I have problem with ROS v3.24 x86. Seems it is a bug in v3.24. Please try this... First: Add any subnet IP Address in your ether. (/ip address add......) Second: Disable that IP Address you made for 10 seconds, then enable it again. And wait 10 seconds...then Disable that IP Address you made for...

YUJOBIKA

for 2nd way you have to set up correct NAT rule, so traffic is not looped, set, for example, src-address that can be directed to proxy using your NAT rule.

You mean set NAT in "Gateway Router" or in "Client Proxy Router" ?

Thanks

YUJOBIKA

Dear Muhammad, You said I have to choose only 1 way. First way: you can change Mangle-Rules in Clint-Proxy-Router (Protocol TCP Dst-Port !80) OR Second way: Do not change any thing in Mangle-Rules in Clint-Proxy-Router but add some rules in Gateway-Router Firewall NAT For First way, it does not work...

YUJOBIKA

WOW !!! Thanks Muhammad

Great tutorial ! I will try again tonight.
100000x thanks Muhammad.

YUJOBIKA

Hi Muhammad,

I have tried your idea, I already "mark route" the traffic, but the traffic always go through "default gateway" of my bridge.

So my router could not shapping my client's IP, because the router see my Proxy's IP

Please help me.

Thanks in advance.

YUJOBIKA

Thanks Muhammad

I will try your idea and will let you know the result.

YUJOBIKA

Suggestion. Replace the switch with an RB450 or similar. From there you can redirect the packets to the proxy-bridge. Thanks Aug, But I could not replace switch with RB or PC with ROS because actually those are 2 X 48 port switch (un-manageable switch). I believe, "Mikrotik as bridge" can...

YUJOBIKA

still waiting answer from all of you

YUJOBIKA

Hi,

Please help me

where is my mistake ? I still need to solve this problem.

Regards

YUJOBIKA

I think because your gateway is behind the bridge you will have difficulty doing it transparently except by redirecting it back using a firewall rule on the gateway router. That seems a bit inefficiant since it's sat before the router from the clients perspective. For it to be transparant you will ...

YUJOBIKA

In your dst-nat rule, try using "in-bridge-port" (ethernet facing router). The bridge will only shape traffic traffic if you have it configured to. If it were me, I might put my dst-nat rule on the router pointing to the proxy bridge.....well actually, I'd run proxy on the router....unles...

YUJOBIKA

Intresting i am not test in MT . i used Linux+squid instead of MT and its work for me. The problem was same as you facing in MT. Add the ip addresses and gateway on bridge interface. the ip range must be your client using. e.g 192.168.1.254/24 gw 192.168.1.1 . Thanks for reply, pokeman :) If I add ...

YUJOBIKA

I still need someone who can help me

Please...

YUJOBIKA

Yes, from my bridge I can ping and traceroute to internet.

YUJOBIKA

36 users view this post, and no one can help me ?
I wonder...does Mikrotik support proxy in bridging ?

YUJOBIKA

No one can help me ?

Please.....

YUJOBIKA

Hi all, I need your help to solve my problem. My boss asked me to build proxy server very soon. I am using Mikrotik proxy and do not want to use Squid because I don't know any Linux script. Please see my attached picture. PROX.gif My question is: Is it possible for MIKROTIK AS BRIDGE + INTERNAL PROX...

YUJOBIKA

Please..I need confirmation from Mikrotik Team.

YUJOBIKA

Hi, I still beleive ROS can do proxy route, because ROS proxy have multiple ports. Anyway, why ROS making multiple proxy ports ? It can be use for something, isn't it ? My topology in ROS v3.20 Gateway for WAN1: 1.1.1.1/29 Gateway for WAN2: 2.2.2.1/29 LAN 1: 192.168.1.1/24 LAN 2: 192.168.2.1/24 I re...

YUJOBIKA

No solution from other members ?
I am still waitting any answer.

YUJOBIKA

is it an issue of MTU across your tunnel ? Are you mangling MSS on the PPP profile ?

I did not change any MTU and did not mangling any MSS.
Do you have solution for my problem ?

Thanks

YUJOBIKA

Hi, I have 2 gateways to internet. My topology: Clients >>> RouterOS >>> Internet 1 >>> Internet 2 I setup RouterOS as VPN Client. Then I mangle TCP Port 80 and make mark route, so these packets go through Internet 1. And Internet 2 will be for all packets beside TCP Port 80. My question: 1) Why som...

YUJOBIKA

Hi,

Can Mikrotik do Multiple Connection to TCP port 80, IP 1.2.3.4 ? So it will act like Download Manager software. Please anyone, how to do it ?

Regards

YUJOBIKA

Hi, How to make script to telnet other device from ROS v3.17 ? I want Mikrotik can do below steps if ping to 1.1.1.10 is Time Out: - telnet 1.1.1.200 - telnet user: admin - telnet password: 1234 - and do this command in device 1.1.1.200 " power backup up " then " reboot " I know ...

YUJOBIKA

Hi Normis,

Thanks for your answer. So I don't wasting my time.

Thanks

YUJOBIKA

Chupaka, where is TTL setting ? I don't want users see xternal IP from "what is my IP" sites.

Thank you

YUJOBIKA

you may buy your own addresses. or just play with TTL, so that users do not see your provider's hops

Chupaka, would you give me sample how to do it ?

Thank You

YUJOBIKA

Hi,

Is it possible to manipulate my ISP's IP address, beside using VPN & Proxy ?
Because I don't want my clients know which ISP I use.

Thank You

YUJOBIKA

No one can help me ?

Please anyone....

Thanks

YUJOBIKA

Hello, My topology: WAN1 gateway: 11.11.11.1/30 WAN2 gateway: 22.22.22.1/30 I have one VPN Server in other country (username: abcd & pass: 1234) What I need: WAN1 goes to gateway 11.11.11.1/30 WAN2 goes to my VPN Server. Question: I tried config in "interface > PPTP Client", but my VPN...

YUJOBIKA

ohh..ROS cannot do that ?

What about squid ? Is it can work for multiple gateway ?

YUJOBIKA

I use dst-nat.

add action=redirect chain=dstnat comment="Proxy" disabled=no dst-port=80 protocol=tcp to-ports=3128

YUJOBIKA

Please help me. My topology in ROS v3.16 Gateway for WAN1: 1.1.1.1/29 Gateway for WAN2: 2.2.2.1/29 LAN 1: 192.168.1.1/24 LAN 2: 192.168.2.1/24 Internal Proxy Port: 3128 My problem: Why my LAN2 always use proxy for WAN1. (It always goes through WAN1's Proxy) What I need: LAN1 go through WAN1's Intern...

YUJOBIKA

So... does Intel D945GCLF compatible in new ROS v3.15 ? I would like to use this mainboard for my new 70 km link with "micro" latency. Please let me know if it is already supported.

Thanks

YUJOBIKA

Mikrotik team should have solution for multi core CPU. I hope nest version will be compatible for Multi Core CPU.

Thanks.

YUJOBIKA

it should help

I already made it NO. And now it work perfecto !!!
Thanks Chupaka. U save my life

YUJOBIKA

multi-cpu=yes

Should I make it NO ?

YUJOBIKA

NTP already allowed. I never had this problem before. Version 3.15 already installed and problem still there.

Please see my detail post here:
http://forum.mikrotik.com/viewtopic.php?f=2&t=27361

Thanks.

YUJOBIKA

Hi, My hardware detail are Motherboard: Intel S3210 SHLC Processor: Intel Xeon 3110 Ram: 2GB (EEC) Case + PS: 350w Hard Drive: 500 GB SATA NS (only for proxy cache) ROS v3.15: installed in USB Flashdisk 1GB (Kingston) My problems are: 1) The clock was never synchronize with NTP Server. The "sec...

YUJOBIKA

NTP client and NTP server for Intel x86 v3.14 is error. It could not sync so time is incorrect. Please repair this bugs.

Thanks

YUJOBIKA

galaxynet, thanks for your help. It working again

YUJOBIKA

galaxynet, would you help me one more time ? I already had working script as follow: :if (([/ping XXX count=10]<5) || ([/ping YYY count=10]<5)) do={......... But how to make this script ? :if (([/ping XXX and AAA count=10]<5) || ([/ping YYY and BBB count=10]<5)) do={......... Would you tell me what ...

YUJOBIKA

Then Squid seems the winner for now. I have 6 MT Router and each of them connected to 6 different internet backbone. Is it possible to use only 1 Squid proxy server for those 6 routers ? I prefer using 1 proxy server only (huge server), so this server will be full of harvest cached Please advice and...

YUJOBIKA

v3.9 still NOT ready for proxy. When it will be ready ??

What's new in 3.9:

*) bridge could make router busy even without traffic;
*) fixed route redistribution in RIP (bug introduced in 3.

;
*) fixed AR5212 kernel crash on setting change;

YUJOBIKA

Make sure that you have enough free space on your disk for cached file. Hi, i am using 320 GB Hardisk. So space is not my problem. I tried all size of zip files (2mb, 3mb, 50mb, 100mb) but mikrotik won't cache those. Some people said beter do with squid. But more hardware means more cost, more powe...

YUJOBIKA

Hi, Many days I tried proxy in ROS v3.7 and today (with hope) just tried v3.8. Come on Mikrotik ! what are you doing ??? My proxy can cache JPG, GIF, BMP, etc. But NEVER cache zip, exe, rar, etc. What is going on ?? I read all forums, but no clue...even ask to Mikrotik also no answer ! Anybody have ...

YUJOBIKA

No one can solve mine ? Please

YUJOBIKA

Dear, Anyone can show me where is the wrong of my script below ? It does not work :( :if (/que tree find packet-mark="packet-A" rate>100000) do={ {/que tree set [find packet-mark="packet-B"] max-limit="300000"} } else={ {/que tree set [find packet-mark="packet-B&qu...

YUJOBIKA

bravo galaxynet

Again...you solved my problem

Hope my boss happy and increase my sallary

Thank You

YUJOBIKA

Dear galaxynet,

My script is work now

But when the script ping to yahoo & google, why they can not ping in the same time ?
The script ping yahoo first then ping google.

Thanks

YUJOBIKA

Dear galaxynet "my best teacher"

Thanks for the info. I'll try it.

YUJOBIKA

galaxynet, I could not found script tutorial for ROS v3.x in http://www.mikrotik.com/testdocs/ros/3.0/ Where is it ? Because I want to now the string/script if my condition like this: - if ping to yahoo AND ping to google is timeout, then script will be execute - if ping to yahoo OR ping to google i...

YUJOBIKA

Dear galaxynet,

I did it !!! I finally success make the script !!!!

You just saved my life

I can not do anything for you beside say HUGE THANKS !!
May GOD bless your kindness !

YUJOBIKA

Dear galaxynet,

What is the script to check if ping is "timeout" or "reply" ?
So if "timeout" to YAHOO, then it will run the script. Then if "reply" to YAHOO, it will run the other one.

Thank You

YUJOBIKA

Dear galaxynet,

Thank you very much for your "very clear" explanation. I will try to set the script you gave me.
Anyway, my ROS is v3.6.

YUJOBIKA

No one can help me ?

Please...my boss start to angry to me

YUJOBIKA

(sorry for my bad english) Please anybody help me. I want to make script which PING to YAHOO once each 1 minute. If PING to YAHOO timeout more than 10 times, will do: /ip address set [find address="1.1.1.1/30"] disabled=yes /tool netwatch set [find host="1.1.1.6"] disabled=yes /i...

YUJOBIKA

Sure .. why not ? By using the load-balancing, option check gateway, it should be able to give you the solution you need. 8) Would you please explain the detail config to me, please ? Because RouterOS is very new for me. I just used Mikrotik since 2 weeks ago, so very new for this :( Thanks for you...

YUJOBIKA

Hallo, I am newbie for Mikrotik RouterOS. Please see my topology in attachment. All of my network are in the same subnet 192.168.1.1/24. And internet backbone at tower 1 & tower 2 are from different ISP. Does mikrotik can do case as follow: - If tower 1 is OFF, then tower 2 & 3 will still co...

Search found 122 matches