Community discussions

MikroTik App

Search found 18 matches

by jgauthier
Mon Jun 21, 2021 2:52 pm
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

Re: VLAN can't access internet, router, or local LAN

Makes sense. Thanks again!
by jgauthier
Mon Jun 21, 2021 5:01 am
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

Re: VLAN can't access internet, router, or local LAN

:( when you waste too many hours because you fat fingered something.

Thanks for spotting that. That, naturally, fixed it.
by jgauthier
Mon Jun 21, 2021 4:24 am
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

Re: VLAN can't access internet, router, or local LAN

I didn't omit anything intentionally. But the copy and pasting from the terminal wasn't great. Here's a better output. /caps-man channel add band=2ghz-b/g/n control-channel-width=20mhz name=2.4Ghz add band=5ghz-a/n/ac control-channel-width=20mhz frequency=5180 name=5.0Ghz /interface bridge add admin...
by jgauthier
Mon Jun 21, 2021 3:15 am
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

Re: VLAN can't access internet, router, or local LAN

You got it, /caps-man security add authentication-types=wpa2-psk encryption=aes-ccm group-encryption=aes-ccm name=security1 add authentication-types=wpa2-psk encryption=tkip name=security2 /caps-man configuration add channel=2.4Ghz country="united states3" datapath=datapath1 datapath.bridg...
by jgauthier
Mon Jun 21, 2021 1:05 am
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

Re: VLAN can't access internet, router, or local LAN

Simplification is good. I reverted to the default list you recommended. Unfortunately, there was no change with the issue. VLAN clients can access (ping) each other, but not the router itself, nor the internet, nor the other network. the router cannot access the clients either. So, perhaps there is ...
by jgauthier
Mon Jun 21, 2021 12:48 am
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

Re: VLAN can't access internet, router, or local LAN

I've been goofing around for the firewall for sometime, and even with logging enabled I'm not getting any hints as to what the issue is. Since the VLAN was added to the bridge, both interface are on the address list "LAN" Adding "bridge" to an interface list does not also add an...
by jgauthier
Mon Jun 21, 2021 12:12 am
Forum: General
Topic: VLAN can't access internet, router, or local LAN
Replies: 13
Views: 747

VLAN can't access internet, router, or local LAN

Well, it seems I've been all over these forums this weekend trying to make a (seemingly) simply change and not having much luck. Recently, I added a VLAN and attached the VLAN to the bridge. I set up the IP pool, DHCP server, and added a new SSID to CAPsMAN. My clients are able to connect to the SSI...
by jgauthier
Sun Jun 20, 2021 10:52 pm
Forum: General
Topic: Trying to add a wireless VLAN (CAPsMAN)
Replies: 2
Views: 304

Re: Trying to add a wireless VLAN (CAPsMAN)

Great! I knew I missed something. That definitely got me an IP address! Now I will see if there are networking issues/firewall masq things I need to do.
Thanks for the close eye.
by jgauthier
Sun Jun 20, 2021 10:43 pm
Forum: General
Topic: Trying to add a wireless VLAN (CAPsMAN)
Replies: 2
Views: 304

Trying to add a wireless VLAN (CAPsMAN)

I'm trying to add a VLAN to segregate an SSID. I thought it would be pretty straight forward, and I'v done plenty of work with VLANs in the past (but not router OS), But I can't seem to get it to "work". Steps I've taken: Added a VLAN interface (named it alexa) and attached it to the bridg...
by jgauthier
Sun Jun 20, 2021 5:48 pm
Forum: Wireless Networking
Topic: Added SSID in CAPsMAN - doesn't show up
Replies: 2
Views: 645

Re: Added SSID in CAPsMAN - doesn't show up

If you are adding it to existing caps, you will need to set it (the new SSID config) as a slave config on the provisioning rule. You might also want to manually provision the cap/radio again as well. Yup, I figured it out after awhile! A slave config made it show up. Now I am having trouble getting...
by jgauthier
Sat Jun 19, 2021 10:59 pm
Forum: Wireless Networking
Topic: Added SSID in CAPsMAN - doesn't show up
Replies: 2
Views: 645

Added SSID in CAPsMAN - doesn't show up

I added an SSID, "Alexa" to my CAPsMAN config. It doesn't show up on the APs though. This the caps config /caps-man channel add band=2ghz-b/g/n control-channel-width=20mhz name=2.4Ghz add band=5ghz-a/n/ac control-channel-width=20mhz frequency=5180 name=5.0Ghz /caps-man datapath add bridge=...
by jgauthier
Tue Jun 08, 2021 8:41 pm
Forum: General
Topic: port forwarding restrictions
Replies: 9
Views: 663

Re: port forwarding restrictions

Even without an (complete) export, set the Src. Address (or a list if you have multiple IP addresses) on your NAT rule.
Ugh. Seriously, I tried this and it did not work. Now, you tell me to do it and it works.

Thanks ;)
by jgauthier
Tue Jun 08, 2021 7:28 pm
Forum: General
Topic: port forwarding restrictions
Replies: 9
Views: 663

port forwarding restrictions

I have several ports opened for various things. I'd like to lock some of the ports down by IP address.

I'm not seeing how to do this with the firewall/NAT interface. Can someone help me out with how that is done?
by jgauthier
Wed Jun 02, 2021 4:02 pm
Forum: General
Topic: Bridge not getting IP address.
Replies: 7
Views: 560

Re: Bridge not getting IP address.

Easiest steps to follow: https://wiki.mikrotik.com/wiki/Manual:Reset#Using_reset_button (and follow "Enabling CAPs mode" description) I have seen that. But I wasn't a big fan of removing a plate and pushing a button for 5s every time I decided to reboot an AP. Or bring the home network do...
by jgauthier
Wed Jun 02, 2021 4:00 pm
Forum: General
Topic: Bridge not getting IP address.
Replies: 7
Views: 560

Re: Bridge not getting IP address.

If you have only two devices why are you using capsman? Well, I have more. However, I'm only setting up one at a time. Right now it's just a WAP router. Connected itself to capman. Then I will start up the APs. This is my first AP. Hopefully, once it's working I can export and import the config.
by jgauthier
Wed Jun 02, 2021 1:53 pm
Forum: General
Topic: Bridge not getting IP address.
Replies: 7
Views: 560

Re: Bridge not getting IP address.

A network diagram with 2 devices doesn't make sense. I created a bridge on my RouterBOARD wAP G-5HacT2HnD. /interface bridge add name=bridge /interface bridge port add bridge=bridge interface=ether1 /ip dhcp-client add disabled=no interface=bridge It doesn't get an IP address from DHCP. If I assign ...
by jgauthier
Wed Jun 02, 2021 4:13 am
Forum: General
Topic: Bridge not getting IP address.
Replies: 7
Views: 560

Bridge not getting IP address.

Greetings, I have a RouterBOARD wAP G-5HacT2HnD, and I am trying to add it to CAPsMAN Following these instructions: https://wiki.mikrotik.com/wiki/Manual:Simple_CAPsMAN_setup When I tried to create a bridge, I never get an IP address from DHCP. /interface bridge add name=bridge /interface bridge por...
by jgauthier
Sat May 22, 2021 11:51 pm
Forum: General
Topic: New MikroTik board.. problem?
Replies: 1
Views: 355

New MikroTik board.. problem?

Greetings, I just bought my first MikroTik device (RB962UiGS-5HacT2HnT-US). I am trying to set it up, but not getting a DHCP address from ports 2-5. Every 30s or the device emits two clicks, all the LAN ports light up for moment then off. It seems if it's rebooting itself every 30s or so. Not sure w...