MikroTik

denissMT

Check testing release tree:
https://mikrotik.com/download/changelogs
What's new in 7.17beta5 (2024-Nov-13 12:51):
*) wifi - improved FT roaming with WPA3 for some Apple devices;

try this firmware.

denissMT

Not possible.
They only work as gateway ("acess point") to LoRa devices.

denissMT

Disappointed IOT does not get connection to the internet and when I downgrade to 7.14.3 connected again to the internet

Same as above, please send us a rif file via the ticket system:
https://mikrotik.com/support

denissMT

MQTT no longer works after upgrade to 7.15

Tested mosquitto and AWS and both brokers work on 7.15. Please send us a rif file via a ticket:
https://mikrotik.com/support

denissMT

Please create a support ticket:
https://mikrotik.com/support

denissMT

Unfortunately, you can not.
The only option you have is to enable "LoRa" logging:
/system logging
add topics=lora
and see some "general" info about the packet in there.

denissMT

We have found the issue, and we are working on a fix!

denissMT

Please create a support ticket:
https://mikrotik.com/support
and attach ChirpStack logs to it.

denissMT

I can confirm that different triggers should report different events. From the guide: https://help.mikrotik.com/docs/display/UM/MikroTik+Tag+advertisement+formats#MikroTikTagadvertisementformats-Example More examples (for 21 octet's value): "08" is the impact on just the x-axis; "18&q...

denissMT

Yes, you would need more than 1 KNOT to cover the whole Bluetooth area.
An idea of such setup is shown at:
https://help.mikrotik.com/docs/display/ ... hingsBoard

denissMT

Can you please elaborate on the "There is no "disable", only remove – so no way to for a disconnect/reconnect."? Well I didn't read the WHOLE page. ;). Adding a "/iot/mqtt/connect broker=" after subscription before publish fixed the "lost first message" probl...

denissMT

*) mqtt - added on-message feature for subscribed topics; *) mqtt - added wildcard topic subscription support; Great work! It works* and there are docs for it, too! "on-message" script works, even UTF-8 encoding passes through okay. "#" wildcard seem to work in quick test. *mino...

denissMT

You can find the block diagram over at: https://i.mt.lv/cdn/product_files/RB924iR-2nD-BT5BG77R11e-LR8_220113.png miniPCIe is occupied by the LR8 miniPCIe card and it is meant to be used for LoRa. You can try installing other miniPCIe cards instead, but it is not the "primary design" of the...

denissMT

As per the guide: https://help.mikrotik.com/docs/pages/viewpage.action?pageId=61046813#heading-ReadingMODBUSdatausingRouterOS the new "transceive" function allows you to send "function=x" command. In the example, we demonstrate: /iot modbus transceive address=1 function=3 data=20...

denissMT

Unfortunately, our LR8 and LR9 cards support only CLASS A and CLASS C devices:
https://i.mt.lv/cdn/product_files/IoTpr ... 210717.pdf
(specification section in the brochure).

CLASS B is not supported.

denissMT

What's new in 7.10beta5 (2023-May-09 13:38): *) iot - added option to send Modbus function code commands directly from RouterOS (CLI only); This means that you can now communicate with the Modbus connected device dirrectly from within RouterOS. You can script the KNOT to send specific function code ...

denissMT

https://mikrotik.com/download/changelogs/testing-release-tree What's new in 7.10beta5 (2023-May-09 13:38): *) iot - added option to send Modbus function code commands directly from RouterOS (CLI only); Meaning, that you can now script the KNOT to send function code commands to the directly connected...

denissMT

Please make a support ticket:
https://mikrotik.com/support

denissMT

Unfortunately it seems, my Mikrotik router cannot directly accept the join request from my device, but only forward that to a network server. It is as you say. You will not be able to install such a package (3-d party one) on RouterOS. Only MikroTik "made" (official) packages are guarante...

denissMT

Unfortunately, it is not possible to push LoRa payloads via MQTT.
LoRa payloads can only be sent to LoRa servers.

denissMT

Please make a support ticket:
https://mikrotik.com/support

denissMT

@denissMT Why then does Getic sell them with and without the LR8? https://www.getic.com/product/mikrotik-knot-lr8-kit https://www.getic.com/product/mikrotik-knot The knot that is not the LR8 kit should have a spare mini pcie slot? As mentioned above, we have KNOT and KNOT LR8: https://mikrotik.com/...

denissMT

Please check the guide at:
https://help.mikrotik.com/docs/display/ ... matization

Make sure that you change the priority - see if it helps. If it does not, please make a support ticket to us -> we will need more information:
https://mikrotik.com/support

denissMT

Hi There Deniss, i have tried this guide and followed each step setting up the email server, and created the schedule. However I still do not get any emails or output from the Knot router at all to email. Apart from the email server setup, is there any thing in the firewall settings that might caus...

denissMT

Thanks Deniss. Is there a way within the KNOT itself to see if there is interference on the BLE channels? If I turn on the Wi-Fi radio and go to the status page it shows a noise floor of -119dBm. Unfortunately, there is no such feature. I would highly suggest trying to see if the payloads are lost ...

denissMT

Our LoRa gateways use miniPCIe cards, like: https://mikrotik.com/product/r11e_lr8#fndtn-specifications or: https://mikrotik.com/product/r11e_lr9 or, new addition: https://mikrotik.com/product/r11e_lr2 The main difference is operating frequency. They are "packet forwarders" and are meant to...

denissMT

If you mean: https://mikrotik.com/product/knot It does not have a free miniPCIe slot that you can use. Devices, like: https://mikrotik.com/product/RBwAPR-2nD Do have one. You need to check the specifications page and check the "Peripherals" section. If the device has a usable miniPCIe slot...

denissMT

LoRa package should be available under "Extra packages":
https://mikrotik.com/download

denissMT

Hi Guys I have a LoRa Gateway connected to The Things Network. Using TTNV3, I have the Integration passing data to Home Assistant. Does anyone know if you can directly configure LoRa to pass directly to Home Assistant, with out using The Things Stack on an internal network? LoRa to MQTT? Cheers Cur...

denissMT

To use an external antenna you need to physically connect the MiniPCIe LR chip with a UFL connector to the SMA slot, as per the guide at:
https://help.mikrotik.com/docs/display/ ... stallation
There is no need for the additional settings - just physically connecting it will make it work.

denissMT

Please create a support ticket in our system:
https://mikrotik.com/support

denissMT

Based on the changelog:
https://mikrotik.com/download/changelogs
It was fixed starting with 7.3.
*) lora - fixed bogus TOO_EARLY errors;

denissMT

Please make sure that you have an external CAT-M/NB-IoT antenna connected to the KNOT's SMA.

If you still have issues and you are certain that another device works perfectly fine in the same location using the same SIM card, please create a support ticket for us.

denissMT

The port should be called a "modem". Please make sure that the issue is not relevant on the latest stable v7 release. We have added a new script to the "PDU structure" guide: https://help.mikrotik.com/docs/display/UM/MikroTik+Tag+advertisement+formats#heading-Scriptfordecoding Th...

denissMT

First of all, make sure SMS is supported by your ISP. Secondly, make sure that the "port" is not used by the PPP out interface: ___ [admin@Blabla] > tool sms send modem phone-number="+xxxxx" message="message" channel=2 failure: port's channel is already in use ___ If yo...

denissMT

If we are talking about specifically/strictly the Bluetooth interface - the main idea is to "listen" for advertising reports. The reports that are stored under the "Advertising reports" tab (under the Bluetooth interface) can then be structured into a message (or specific "o...

denissMT

Please create a support ticket:
https://mikrotik.com/support

denissMT

We have recently added a new guide on how to send an e-mail notification from the KNOT in case the "trigger" is detected. You can find the guide by following the link: https://help.mikrotik.com/docs/display/UM/Email+notification+on+the+MikroTik+BLE+tag%27s+accelerometer+triggers You can fi...

denissMT

Unfortunately, KNOT's Bluetooth interface is not meant for pairing. It is, currently, only meant for "scanning" advertising reports and "advertising" custom payloads using 37, 38, and 39 Bluetooth channels.

denissMT

Please check the video at: https://www.youtube.com/watch?v=YTuZ-VHmqRo There is no need to "pair" anything. Once the tags are in the advertising mode: https://help.mikrotik.com/docs/display/UM/TG-BT5-IN#heading-Tagmodes tags will broadcast information about themselves in the Bluetooth pack...

denissMT

In the current Bluetooth implementation, the "data" parameter shows the "AdvData" (0...31 octets) part of the whole "PDU payload".

denissMT

What about latest OS v 7.1.5? I can't find LoRa on updates wAP LoRa8 kit.

Is it hidden somewhere?

Thank You!

https://mikrotik.com/product/wap_lr8_kit is MIPSBE architecture.
You can find the lora package under "extra packages" on our download page:
https://mikrotik.com/download

denissMT

Hello! We have already found a similar issue with the LoRa. If you can confirm that this behavior happens every 70 minutes (after the device is rebooted or LoRa interface is disabled and reenabled) and that after 70 minutes, the downlink messages stop being sent for the duration of 2 minutes (even t...

denissMT

Create different variables for each address and set up the scheduler (to run the script whenever you like).

denissMT

It would look something like this: :local modbusread [/iot modbus read-holding-registers slave-id=0x03 num-regs=0x1 reg-addr=0x0 as-value once] :local modbus [:put [($modbusread->"values")]] #################################### MQTT ##################################### :local message \ &q...

denissMT

Currently, it is only available to post the Bluetooth data via a script. It is the only solution we have.

We will see what we can change/add in the future.

denissMT

<r>We have added a note to the guide:<br/> <URL url="https://help.mikrotik.com/docs/display/UM/MikroTik+Tag+advertisement+formats"><LINK_TEXT text="https://help.mikrotik.com/docs/display/ ... nt+formats">https://help.mikrotik.com/docs/display/UM/MikroTik+Tag+advertisement+formats</LINK_TEXT></URL><b...

denissMT

AoA and AoD are not supported.
You can track tags based on the RSSI level.

denissMT

Currently, only MQTT publish is supported (MQTT subscriber is not). MODBUS allows KNOT to act as a TCP bridge and read data from Modbus-supported devices connected to a 2-pin terminal block on the board. Modbus clients (slaves) can access the data from the Modbus server (master - KNOT) using the 502...

denissMT

Unfortunately, it is not possible.

denissMT

Make sure that pings between the MQTT broker/server and RouterOS work. If both devices can reach each other and pings are successful, you can use a tool like Packet Sniffer - to see whether the MQTT packets are sent/received back:
https://help.mikrotik.com/docs/display/ ... et+Sniffer

denissMT

Try applying filters to the script: # POSIX regex for filtering advertisement Bluetooth addresses. E.g. "^BC:33:AC" # would only include addresses which start with those 3 octets. # To disable this filter, set it to "" :local addressRegex "" # Signal strength filter. E....

denissMT

Currently, MODBUS in RouterOS can display only the response/reply to function code 3 (Modbus) request (that is if Modbus "slave" device that is connected to KNOT supports "function code 3"): https://help.mikrotik.com/docs/pages/viewpage.action?pageId=61046813#heading-ReadingMODBU...

denissMT

You can use a command like this: curl -k -u admin: -X POST https://ip_address/rest/system/gps/monitor --data '{"once":""}' -H "content-type: application/json" HTTP GET will only return the data that is available using "print" command, like, for example, "...

denissMT

Hi wonderful feature, but I tried it and doesn't work for me. [admin@jindra] > iot export /iot mqtt brokers add address=192.168.12.2 client-id=test name=kancl password=***** username=user [admin@jindra] > iot mqtt publish broker=kancl message="test" topic=mikrotik No traffic in sniffer to...

Search found 55 matches