Community discussions

MUM Europe 2020

Search found 30 matches

by ManUtd
Mon Apr 20, 2015 1:20 pm
Forum: General
Topic: Exclude hotspot messages in log
Replies: 2
Views: 417

Re: Exclude hotspot messages in log

It works.

Thanks!
by ManUtd
Mon Apr 20, 2015 11:36 am
Forum: General
Topic: Exclude hotspot messages in log
Replies: 2
Views: 417

Exclude hotspot messages in log

Hi,

How can exclude any messages with "hotspot" topic from log ?

I have also error, info, debug topics with hotspot in that message. I want to exclude only that messages related to hotspot and to see everything else with those topics (error, info, debug)...

Any help ?
by ManUtd
Sun Feb 26, 2012 11:50 pm
Forum: RouterBOARD hardware
Topic: VERY big difference in CPUs usage on RB1100AHx2
Replies: 11
Views: 4786

Re: VERY big difference in CPUs usage on RB1100AHx2

RPS was always turned on. No change in load under ROS 5.14.
frankie
RPS has helped you?
It has become better?
Thanks for info frankie.
by ManUtd
Fri Feb 24, 2012 8:53 am
Forum: RouterBOARD hardware
Topic: VERY big difference in CPUs usage on RB1100AHx2
Replies: 11
Views: 4786

Re: VERY big difference in CPUs usage on RB1100AHx2

normis,

thats ok but why cannot select which process using which CPU ? I mean, why i.e. queuing or firewall is not processing by CPU which have less load ?
by ManUtd
Thu Feb 23, 2012 8:13 pm
Forum: RouterBOARD hardware
Topic: VERY big difference in CPUs usage on RB1100AHx2
Replies: 11
Views: 4786

Re: VERY big difference in CPUs usage on RB1100AHx2

frankie,

No, conn. tracking is OFF. I see that you have same situation even with only 2 ether i-faces. Did you try to update to 5.14?

DobroFenix,

Maybe you have some loops in network, do /tool torch to found out that
by ManUtd
Sun Feb 19, 2012 9:24 pm
Forum: RouterBOARD hardware
Topic: VERY big difference in CPUs usage on RB1100AHx2
Replies: 11
Views: 4786

VERY big difference in CPUs usage on RB1100AHx2

Hi, RB1100AHx2, ROS 5.13, latest firmware. About 300/40mbit of traffic and I have very big usage of only one CPU. First 10 ports bridged, ether13 using as uplink. Even, in /profile, it some CPU load on firewall but I don't have ANY filter, nat or mangle rule. Is there any way to make usages of CPUs ...
by ManUtd
Sun Nov 27, 2011 2:18 pm
Forum: General
Topic: disappearing default route on SXT ?
Replies: 2
Views: 509

Re: disappearing default route on SXT ?

sadeghrafie,

pppoe-client remains connected but no default route when I do MAC telnet to SXT from AP and see routes in ip route table.
Yes, add default route is checked.
by ManUtd
Sat Nov 26, 2011 2:39 pm
Forum: General
Topic: disappearing default route on SXT ?
Replies: 2
Views: 509

disappearing default route on SXT ?

Hi to all, I have problem with disappearing dinamic default route on SXT. It's happening randomly, after few hours and after few days...no rule. SXT works in client (station) mode, connected via pppoe-client to AP. On various version of ROS (5.x) is same problem. Anyone with same siptoms ?! Of cours...
by ManUtd
Tue Nov 15, 2011 9:56 am
Forum: RouterBOARD hardware
Topic: OmniTIK default, new, config ?!
Replies: 4
Views: 1345

Re: OmniTIK default, new, config ?!

Nice to hear that. Thanks again.
by ManUtd
Sat Nov 12, 2011 8:46 pm
Forum: RouterBOARD hardware
Topic: OmniTIK default, new, config ?!
Replies: 4
Views: 1345

OmniTIK default, new, config ?!

Hello, just to ask MikroTIK team why the default config of OmniTIK is same as on RB750 (cannot access ROS via ether1 because no neighbor and ip on this port and firewall rules block access) ?! That's don't make any sense because in RB750 case you have router on the desk and it's easy to put lan cabl...
by ManUtd
Thu Oct 20, 2011 9:33 am
Forum: Wireless Networking
Topic: 300/24Mb. Which side is the interference?
Replies: 2
Views: 984

Re: 300/24Mb. Which side is the interference?

Interference is on TX side (where air rate is 300Mbps), probably caused by another radio on same board/box.
by ManUtd
Fri Aug 19, 2011 12:55 am
Forum: General
Topic: How to Block UnknownUsers Using Free PtP Links via MyDevices
Replies: 9
Views: 1212

Re: How to Block UnknownUsers Using Free PtP Links via MyDev

Turn off default forward on APs.
by ManUtd
Thu May 19, 2011 10:30 pm
Forum: Scripting
Topic: Automatically Change Frequencies To Compensate for Weather
Replies: 27
Views: 10971

Re: Automatically Change Frequencies To Compensate for Weath

RK, It was great chatting with you and I hope you enjoy the script. It was thoughtful of you to pay for the work and then let the community benefit from it freely. If you or anyone else should have a need for advanced MT scripting and design, please do not hesitate to call on me! -John INSTALLATION...
by ManUtd
Sun Apr 10, 2011 3:11 pm
Forum: Wireless Networking
Topic: NV2 link - iface is R but no traffic
Replies: 3
Views: 974

NV2 link - iface is R but no traffic

NV2 link, 22km, site A: RB800/R52n-M/ROS 5.0/ site B: RB433AH/R52n-M/ROS 5.0, signal is ~ -60 on both chains and after a while (2 days in this case) uptime of link, traffic stops but iface is still running with same signal and TX/RX rates (130/130). After disable and enable iface, everything works a...
by ManUtd
Wed Sep 22, 2010 9:48 pm
Forum: RouterBOARD hardware
Topic: RB800 don't stop beeping
Replies: 6
Views: 1481

Re: RB800 don't stop beeping

Nothing at all, i tryed to change speed settings (10/100/1000, FD/HD) on eth interface on PC, still nothing
Is there any chance to boot up RB800 via CF card with instaled ROS (for powerpc) on it ? And how to install ROS which is not for x86 on CF anyway ?!
by ManUtd
Wed Sep 22, 2010 8:33 pm
Forum: RouterBOARD hardware
Topic: RB800 don't stop beeping
Replies: 6
Views: 1481

Re: RB800 don't stop beeping

It's only file you can upload to the router via serial port - *.fwf but can't use it for reinstall ROS
by ManUtd
Wed Sep 22, 2010 8:01 pm
Forum: RouterBOARD hardware
Topic: RB800 don't stop beeping
Replies: 6
Views: 1481

Re: RB800 don't stop beeping

I can't because eth1 is broken and it's impossible do netinstall over other 2 ethernet ports...
by ManUtd
Wed Sep 22, 2010 5:49 pm
Forum: RouterBOARD hardware
Topic: RB800 don't stop beeping
Replies: 6
Views: 1481

RB800 don't stop beeping

So, RB800 stay beeping for a while when he power up. He made first beep ok and when he should beep twice and finish booting, he stays on beeping (pretty fast beeping) for a minut and reboot himself. After reboot, it's same thing again. Connected to serial port , I got this in console: ______________...
by ManUtd
Fri Jun 18, 2010 8:59 am
Forum: General
Topic: Netinstall RB532 without Eth1 (PoE)
Replies: 13
Views: 2655

Re: Netinstall RB532 without Eth1 (PoE)

COELPL, any news from you about this problem ?
by ManUtd
Tue Apr 13, 2010 12:43 am
Forum: General
Topic: Log to file clarification.
Replies: 6
Views: 1379

Re: Log to file clarification.

like he said, disable your "memory" rules first, then see if it happens Normis, I not have any memory rules... My loggin export: [admin@hotspot] /system logging> export ... /system logging action set memory memory-lines=100 memory-stop-on-full=no name=memory target=memory set disk disk-file-count=2...
by ManUtd
Wed Oct 28, 2009 10:38 pm
Forum: Wireless Networking
Topic: low CCQ
Replies: 1
Views: 1032

Re: low CCQ

It's same ROS version/equipment on both clients ? We have same problem, Mikrotik, 5G, omni antenna and ~10 clients connected. Clients that have NanoStation 5 works fine with good ccq in both sides (with or w/out active traffic). Others, that have MT have very poor and unstable ccq and rx rate, in sa...
by ManUtd
Sun Oct 25, 2009 10:08 am
Forum: Wireless Networking
Topic: long distance link keeps dropping
Replies: 5
Views: 1030

Re: long distance link keeps dropping

Try to swap R52H with R5H (if you need little more dB) or use old good CM9.
We have some long links with R52H and have same problems until changing radio cards.
by ManUtd
Mon Sep 08, 2008 7:04 pm
Forum: General
Topic: PPPOE DIE even on 3.13
Replies: 50
Views: 9699

Re: PPPOE DIE even on 3.13

Problem with PPPoE is in RouterOS version which is not RC (release candidate). If you (I) use 3.0rc9 for example, on RB333/600, pppoe never freeze and everything works fine. Ok, try to upgrade it to 3.13 - pppoe die. I tried to do same thing (put 3.0rc9) on RB433 but not working on this board, only ...
by ManUtd
Fri Mar 21, 2008 12:30 am
Forum: Wireless Networking
Topic: Low signal After one month
Replies: 10
Views: 1506

Re: Low signal After one month

yes omni antenna, at 10 dbi.

Is an abnormal situation after some time the MINI PCI-stops working on arrangements and has a low gain.

ThX
I try CM9, R52(H), some TP-LINKs...all lose power on omni, only WLM54(A)G (Compex) card works fine. Try that one...
by ManUtd
Thu Mar 20, 2008 8:23 pm
Forum: Wireless Networking
Topic: Low signal After one month
Replies: 10
Views: 1506

Re: Low signal After one month

Omni antenna on R52H ?
by ManUtd
Fri Feb 15, 2008 6:49 pm
Forum: Wireless Networking
Topic: Problem with upgrading RB112...
Replies: 3
Views: 823

Re: Problem with upgrading RB112...

Yes, I try drag and drop and same thing.
Yes, version of .npk is correct, for rb100 series (same for rb500 too)
by ManUtd
Thu Feb 14, 2008 7:19 pm
Forum: Wireless Networking
Topic: Problem with upgrading RB112...
Replies: 3
Views: 823

Problem with upgrading RB112...

Hi, I can't upgrade RB112 (ROS 2.9.24) to 2.9.50. When I put new package (.npk) in files directory on RB and do reboot, system won't stand up. After switching POE off and turn on again, old ROS is running. I try this on another 112 and same thing is happening, even when I try to downgrade to oldest ...
by ManUtd
Fri Jan 25, 2008 9:09 pm
Forum: General
Topic: ROS v3.0 freezing client computers!
Replies: 5
Views: 3103

Re: ROS v3.0 freezing client computers!

Of course the Windows machine can freeze only due to a bug in software drivers. If we could find out why, we could make a workaround. Did you try upgrading to 3.1? There is a fix for other client wireless issues. I also think that the problem is not in ROS but how can else explain? Everyone use sam...
by ManUtd
Thu Jan 24, 2008 10:01 am
Forum: General
Topic: ROS v3.0 freezing client computers!
Replies: 5
Views: 3103

ROS v3.0 freezing client computers!

Hi, I have AP with RB333 and 3 miniPCI on it. 2 Compex WLM54G for clients and 1 R52 for link. Clients are connected trough 2 sectors (120 degree each) and ALL clients have same equipment (D-Link PCI card, 20db grid antenna). Some of them works fine and never disconnect and some have problem that com...
by ManUtd
Sun Sep 16, 2007 10:52 pm
Forum: Wireless Networking
Topic: 65km p2p link - floating and unstable signal
Replies: 2
Views: 757

65km p2p link - floating and unstable signal

Hi to all, I have 65km 5.8 GHz link between two cities. Each side has 32dbi parabolic antenna, 532A, Compex miniPCI 200mW. Thats all works fine at ~ -65-70dbm but sometimes i have very large floating of signal. It happends that link works fine for 5 days at -65 and than start to going down to -80, -...