Community discussions

MikroTik App

Search found 216 matches

by odie
Thu Jun 09, 2016 3:31 pm
Forum: General
Topic: CCR Rx FCS Errors
Replies: 6
Views: 2923

Re: CCR Rx FCS Errors

we have about 60m Cable and a SUB10 Gigbit microwave unit at the end, no errors there....
by odie
Thu Jun 09, 2016 3:00 pm
Forum: General
Topic: CCR Rx FCS Errors
Replies: 6
Views: 2923

Re: CCR Rx FCS Errors

same problem here as well, 596 FCS Errors in 30 days is not sooo much, but is not ok !! no errors on RB1100 before name="ether11" driver-rx-byte=5 347 481 269 413 driver-rx-packet=8 213 181 544 driver-tx-byte=2 765 326 209 750 driver-tx-packet=7 177 303 996 rx-bytes=5 380 334 039 817 rx-packet=8 213...
by odie
Wed Nov 19, 2014 6:42 pm
Forum: General
Topic: Winbox losing MAC connection to RB850Gx2
Replies: 44
Views: 13802

Re: Winbox losing MAC connection to RB850Gx2

same problem...
6.18 and 6.22 also...
by odie
Wed Aug 27, 2014 11:14 am
Forum: RouterBOARD hardware
Topic: Temperature Range SFP-Modules
Replies: 3
Views: 2765

Re: Temperature Range SFP-Modules

Ours are not as hot.... a bit higher then the mainboardboard temp... system health: fan-mode: auto use-fan: main active-fan: main cpu-overtemp-check: yes cpu-overtemp-threshold: 100C cpu-overtemp-startup-delay: 1m voltage: 24V current: 1599mA fan-speed: 5688RPM fan-speed2: 5875RPM temperature: 40C c...
by odie
Wed Aug 20, 2014 8:53 am
Forum: General
Topic: Downgrade from 6.18 to 5.26 - IPSec 100% CPU
Replies: 6
Views: 3577

Re: Downgrade from 6.18 to 5.26 - IPSec 100% CPU

i had the same problem on a box (RB532) up a mountain - disabled security and advanced tools then cpu was normal...
by odie
Thu Jan 23, 2014 3:23 pm
Forum: General
Topic: RB110Ahx2 RS v6.6: slow pppoe-performance (basicaly ftp)
Replies: 5
Views: 1796

Re: RB110Ahx2 RS v6.6: slow pppoe-performance (basicaly ftp)

i never tried - but i will check also ...
but now i am off for skiing...
by odie
Wed Jan 22, 2014 8:26 pm
Forum: General
Topic: RB110Ahx2 RS v6.6: slow pppoe-performance (basicaly ftp)
Replies: 5
Views: 1796

Re: RB110Ahx2 RS v6.6: slow pppoe-performance (basicaly ftp)

hi
do you use queues automatically set by ppp profile or radius ?
if yes -in the default used "default-small" set "Queue Size" to 50 packets or even higher
by odie
Sun Sep 15, 2013 6:50 pm
Forum: General
Topic: UPS does not work in OS v6.2 v6.3
Replies: 8
Views: 2418

Re: UPS does not work in OS v6.2 v6.3

Serial with UPC smart ups
works on 5.x never run in 6.x after upgrade
by odie
Thu Sep 12, 2013 11:14 am
Forum: General
Topic: UPS does not work in OS v6.2 v6.3
Replies: 8
Views: 2418

Re: UPS does not work in OS v6.2 v6.3

yes - same problem
works only in 5.xx - never got it running in 6.x
by odie
Thu Aug 22, 2013 10:30 am
Forum: General
Topic: RouterOS 6.2 x86 PPPoE issue
Replies: 4
Views: 2420

Re: RouterOS 6.2 x86 PPPoE issue

Have the same Problem on rb1100 AHx2
by odie
Wed Aug 07, 2013 9:17 am
Forum: RouterBOARD hardware
Topic: CCR1036-8G-2S+
Replies: 16
Views: 4573

Re: CCR1036-8G-2S+

they did not tell the year !!!
by odie
Thu Jul 11, 2013 8:04 am
Forum: General
Topic: Where is CRS?
Replies: 3
Views: 1023

Re: Where is CRS?

they did not tell us the year -just the month ...
by odie
Wed May 29, 2013 4:48 pm
Forum: The User Manager
Topic: USER MANAGER FOR 5000 Users - Need Help
Replies: 5
Views: 3825

Re: USER MANAGER FOR 5000 Users - Need Help

easy to use radius server and worth its money, we also bulit a billing and management solution based on microsoft navision based on this radius
www.evolynx.com
by odie
Thu May 02, 2013 12:59 pm
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 33306

Re: v6rc14 released

sent it to support this morning !!
including supout
by odie
Thu May 02, 2013 9:11 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 33306

Re: v6rc14 released

the config works until rc13....
seems to be not so wrong...
and also works on >100 other MT boxes
by odie
Thu May 02, 2013 2:45 am
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 33306

Re: v6rc14 released

it is a release candidate for sure - but major things like Vlans should work....
and also with 5.24 we have even more sudden reboots of the boxes and no answers or fixes
and MT sell routers where you cant use a final ROS ( CCR )
by odie
Wed May 01, 2013 4:39 pm
Forum: General
Topic: v6rc14 released
Replies: 125
Views: 33306

Re: v6rc14 released

after upgrade from rc13 no more connectivity via Vlan on RB1100AHx2 it is a shame that MT does not really test those releases !!! i would like to get some money for testing and wasting time with this buggy stuf ! it seems that Mikrotik OS gets worse from release to release sorry but i have enought !...
by odie
Tue Apr 16, 2013 11:19 am
Forum: General
Topic: 5.24 released!
Replies: 161
Views: 48287

Re: 5.24 released!

we have unplanned reboots with this release- just habbend again a few minuntes ago - on RB1100AhX2 used as pppoe concentrator and running in an OSPF network. 4 different boxes - even some without pppoe reboot - so it seems to be a software problem !!! the higest uptime we have is about 30 days - eve...
by odie
Mon Jan 07, 2013 8:45 am
Forum: General
Topic: RB 1100AH x2 and simple queue problems...
Replies: 9
Views: 3058

Re: RB 1100AH x2 and simple queue problems...

did you try other interfaces ?
by odie
Mon Dec 03, 2012 8:48 am
Forum: General
Topic: 6.0rc4 released!
Replies: 101
Views: 20274

Re: 6.0rc4 released!

had the same problem with queues - but had them deactivated before upgrading - same happend - after upgrade from 5.21 to RC4 (RB1100AHx2)there have been 2 targed addresses at each queue - the second one that was added at the update is 0.0.0.0/0 - not a big problem on my testbox not so good in real ....
by odie
Mon Jul 23, 2012 6:35 pm
Forum: RouterBOARD hardware
Topic: Problem with SXT Tx Signal..
Replies: 7
Views: 2694

Re: Problem with SXT Tx Signal..

are both chains turned on ?
seems that one of them is off
wireless interface/HT
by odie
Tue Jun 19, 2012 11:41 pm
Forum: Beginner Basics
Topic: Billing system with user manager or PPOE server
Replies: 3
Views: 1868

Re: Billing system with user manager or PPOE server

we built our own management system based on microsoft Dynamics NAV (former Navision) and MS SQL Based (www.evolynx.com)radiusserver togehter with a microsoft partner who is customising navision installations - well this was a bit more then customising ,-)
http://www.dynavics.com/
by odie
Wed May 09, 2012 10:37 pm
Forum: RouterBOARD hardware
Topic: How to Control 1100AHx2 fans
Replies: 7
Views: 4580

Re: How to Control 1100AHx2 fans

when you cahnge the input voltage of the board fan speed also changes
just found out today...
when running on 12V - internal power speed is about 3500 rpm, at the moment you plug in a pppoe supply with about 23V then fan speed gets upt to 7000 rpm...
bug or feature ?
by odie
Fri May 04, 2012 8:51 am
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 59560

Re: RB750UP - Issue

you cant mix tagged and untagged vlans on one physical lan port - on all mikrotiks !!
i have thrown out all my 750 UP boards 2 days ago because they are unstable and not the remote powerd UBNT devices
i am looking forward to a solution with the power problem
by odie
Sun Apr 29, 2012 10:45 pm
Forum: RouterBOARD hardware
Topic: RB750UP - Issue
Replies: 260
Views: 59560

Re: RB750UP - Issue

i have a new problem since 2 days now we have 4x 750UP each powering 2 or 3 devices (ubnt rockets) on a tower that configuration has been running now for about 2 month without a problem - since 2 days now the rb750UP hang up - all of them a t the same moment !! we are still testing and only 3 custom...
by odie
Tue Mar 06, 2012 2:45 pm
Forum: The Dude
Topic: Dude 4.0 beta4??
Replies: 39
Views: 25792

Re: Dude 4.0 beta4??

snmp problems are getting worse the more clients you monitor - seems to be an I/O problem ? we are running the dude server on a intel dual 4 core server with 32gb ram on w2k8r2 getting more and mor troubels with alarms beacuse of snmp polling errors a feature to move some items to a new sub-map woul...
by odie
Mon Feb 20, 2012 4:43 pm
Forum: General
Topic: v5.13 released
Replies: 64
Views: 9605

Re: v5.13 released

any update about the port flapping problem in 5.13 ? having the same problem here between new rb1100AH and 750up downgrade to 5.12 solved problem ... problem seems to be only on ports 6 to 10 (second switch chip) and only if there are not more then 2 or 3 of the 5 ports are used ... if there are at ...
by odie
Tue Feb 14, 2012 12:40 pm
Forum: Wireless Networking
Topic: Solar power and batteries.
Replies: 32
Views: 13315

Re: Solar power and batteries.

i can't believe that this works 24x7 !!
by odie
Wed Dec 21, 2011 10:41 am
Forum: Wireless Networking
Topic: Solar power and batteries.
Replies: 32
Views: 13315

Re: Solar power and batteries.

http://forum.mikrotik.com/viewtopic.php ... ll#p237245

this would be a solution works fine here for years now
have a look at the fuel cell ...
by odie
Sat Dec 10, 2011 5:20 pm
Forum: Wireless Networking
Topic: GigaBit POE for RB/800??
Replies: 5
Views: 1708

Re: GigaBit POE for RB/800??

PowerDsine 9001G ?
by odie
Wed Nov 09, 2011 11:32 am
Forum: General
Topic: V5.9 Nv2 performance improvement
Replies: 18
Views: 7053

Re: V5.9 Nv2 performance improvement

updated a PtmP link this night (4 Stations) - seems to run fine ;-))
can see a bit more of the signals and rateselection seems to be more stable
we will keep an eye on it...
by odie
Mon Nov 07, 2011 7:30 pm
Forum: RouterBOARD hardware
Topic: RB800 & ROS v5.8 kernel failure
Replies: 3
Views: 941

Re: RB800 & ROS v5.8 kernel failure

i have a similar problem with rb1200 - rebooting with 5.8 and imported config and can´'t find reason
but cant add config step by step becaus it is production at a railway company - working 24-7
supout to support allready sent...
by odie
Sun Aug 14, 2011 3:21 pm
Forum: RouterBOARD hardware
Topic: Solar Tracking
Replies: 10
Views: 5629

Re: Solar Tracking

around 4000€ including the 2-tank switch - that automatically changes to the other tank when the first one is empty and can be monitored also via serial console like this.. should be cheaper allready - there is a new consumer line from efoy avaliable SFC>sfc battery voltage 28.02V output current 0.0...
by odie
Wed Aug 10, 2011 8:08 am
Forum: General
Topic: v5.6 released
Replies: 91
Views: 22594

Re: v5.6 released

you should have a look at the status of the interface - not the settings to see the real connection speed !!!
settings are set to auto negotiation - the speed setting there is for nothing..
as you write that you have a 1 Gbit IF then you might also have gbit connection !!
by odie
Thu Jun 23, 2011 9:56 pm
Forum: General
Topic: Strange Uptimes....
Replies: 2
Views: 710

Re: Strange Uptimes....

sure YOU now it better ......
it is only ONE system with a bug ....
by odie
Thu Jun 23, 2011 2:37 pm
Forum: General
Topic: Strange Uptimes....
Replies: 2
Views: 710

Strange Uptimes....

how can the wireless connection time be higher then the up time of the board??
uptime.jpg
by odie
Fri Mar 25, 2011 1:23 pm
Forum: General
Topic: Mikrotik on VMWare ESX
Replies: 6
Views: 1345

Re: Mikrotik on VMWare ESX

i have 4.17 runnning on latest vmware esxi 4.1U1 - no problem - use Intel eth - problem is in the config of your virtual machine !
by odie
Sun Feb 27, 2011 5:40 pm
Forum: General
Topic: Power router 732 is hanging frequently
Replies: 3
Views: 1544

Re: Power router 732 is hanging frequently

and also update to latest ROS 4.16 !
by odie
Thu Feb 03, 2011 3:38 pm
Forum: General
Topic: RouterOS v5rc8
Replies: 110
Views: 21837

Re: RouterOS v5rc8

any news about the RB1200 that was mentioned in the first change-log-release.......
more cpu power then the rb 1000 ?

*) added extended ethernet statistics (/interface ethernet print stats) for RB800,RB1000,RB1100,RB1200 and RB7xx with AR7241 or newer cpu;
by odie
Sun Dec 12, 2010 12:10 pm
Forum: General
Topic: Upgrade RB433 v3.14-v4.14 router does not have any valid key
Replies: 8
Views: 6697

Re: Upgrade RB433 v3.14-v4.14 router does not have any valid

how did you update the software - via netinstall, ftp oder winbox ?
by odie
Mon Nov 22, 2010 6:58 pm
Forum: RouterBOARD hardware
Topic: Solar Tracking
Replies: 10
Views: 5629

Re: Solar Tracking

we updated one of our solar stations with SFC fuell cell "EFOY Pro 600" 2 weeks ago because we had troubles during winter, and now we hope, and it looks great, that we dont need to climb the hill with one of our small honda generators agin.... we have 2x 120W solarpanel, and now we have only 24V 72 ...
by odie
Mon Sep 06, 2010 10:31 am
Forum: Virtualization
Topic: RouterOS and Exsi
Replies: 9
Views: 4099

Re: RouterOS and Exsi

i have ros running in esx4 and esxi4 servers and having no problems
one of them is also running the user manager
never checked troughput - as i never had a problem
by odie
Wed Aug 18, 2010 5:09 pm
Forum: General
Topic: RouterOS v5 beta 6
Replies: 84
Views: 24933

Re: RouterOS v5 beta 6

just upgraded a production link in our network with beta6 und R52Hn cards
built in Huber&Suhner 23 Antennas using only 1 channel about 13 KM
seems to work fine ;-))
getting up to 35 Mbit with conservative settings and low power setting
also latency is very low...
waiting for finals....
by odie
Wed Aug 18, 2010 1:54 pm
Forum: General
Topic: wds bridge Beta5 R6
Replies: 3
Views: 1501

Re: wds bridge Beta5 R6

did you read the release notes !!
is beta and not fully functional !
by odie
Tue Jul 27, 2010 5:06 pm
Forum: General
Topic: New wireless protocol: Nv2 in v5.0beta5
Replies: 217
Views: 82908

Re: New wireless protocol: Nv2 in v5.0beta5

no problem staying to the rules !! but if you would like to sell more of your products you should also here to your customers !!!! we have many hundreds of your devices in use ! and we need an affordable client we have this wish since years now - and where is your answer ?? rb 411 ? - which enclosou...
by odie
Wed Jul 07, 2010 12:28 pm
Forum: RouterBOARD hardware
Topic: RB800 heat problem advisory
Replies: 58
Views: 19636

Re: RB800 heat problem advisory

so i have to put all my boards into the oven to test ??
this cant be a soluiton ....
by odie
Wed Jul 07, 2010 11:53 am
Forum: RouterBOARD hardware
Topic: RB800 heat problem advisory
Replies: 58
Views: 19636

Re: RB800 heat problem advisory

and how to find out if i have one of the problematic boards on stock ??
by odie
Sun Jun 20, 2010 7:47 pm
Forum: RouterBOARD hardware
Topic: How to reset a miniPCI 3G-modem card?
Replies: 9
Views: 4792

Re: How to reset a miniPCI 3G-modem card?

i think i have the same problem here with a usb huawei E169 as long it is connected to 1 cell it works
on changeing between cells it seems to hung up
only powercycle helps - watchdog doesnb not !
first i thougt the powersupply on the usb port is not strong enough but now i am not so sure anymore...
by odie
Wed Mar 17, 2010 8:44 am
Forum: Wireless Networking
Topic: rb433ah , Demo license expired! 4.6
Replies: 3
Views: 1301

Re: rb433ah , Demo license expired! 4.6

disable all firewall on the computer running netinstall during installing
disable all other dhcp or bootp servers in your network!
http://wiki.mikrotik.com/wiki/Netinstall

and reading documentation before acting could help.....
by odie
Mon Feb 01, 2010 11:46 am
Forum: General
Topic: IPSEC with dynamic clients
Replies: 5
Views: 1606

Re: IPSEC with dynamic clients

but works only until ip from client is renewed...
first time the dynamic policies have not been deleted
after SA flush the connecetion got up again
after next iprenew the dynamic policies have been deleted and a new SA has been stared
but no policies haven been built....
very strange all that...
by odie
Sun Jan 31, 2010 7:54 pm
Forum: General
Topic: IPSEC with dynamic clients
Replies: 5
Views: 1606

Re: IPSEC with dynamic clients

default policy adapted
and it works....

thanks a lot!
by odie
Sun Jan 31, 2010 7:34 pm
Forum: General
Topic: IPSEC with dynamic clients
Replies: 5
Views: 1606

Re: IPSEC with dynamic clients

and which proposal is used for that dynamic policy ?
by odie
Sun Jan 31, 2010 7:18 pm
Forum: General
Topic: IPSEC with dynamic clients
Replies: 5
Views: 1606

IPSEC with dynamic clients

hello did anybody try to setup an IPSEC tunnel connection to a client router with dynymic ip address ? in this case it is a AVM Fritzbox, but i also cant find a way how to do it with a mikrotik box. the client (fritz box) has a dyndns name, and when i enter the actual ip into my mikrotik config the ...
by odie
Tue Jan 12, 2010 8:17 pm
Forum: General
Topic: 4.4 BUG at x86 - clock is 10 times faster then it should be
Replies: 29
Views: 5321

Re: 4.4 BUG at x86 - clock is 10 times faster then it should be

why dont you use routerboards ?
or just test your mainboards before putting them into production ??
mt cant test all mainboards on the market if their os runs on them
and simply dont use a ros version that makes problem with your hardware
by odie
Fri Dec 18, 2009 12:48 am
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 13313

Re: v3.X uptime challenge

my lancom accesspoint is still running....
Uptime: 4Y 3M 4D 17:33:58
all mikrotiks got softwareupdates ;-((
by odie
Wed Nov 11, 2009 8:50 pm
Forum: Beginner Basics
Topic: Remove Mikrotik word from ERROR: Gateway Timeout
Replies: 28
Views: 8226

Re: Remove Mikrotik word from ERROR: Gateway Timeout

you could spend your time waiting for experts suggestion on reading the wiki or a manual.....
by odie
Wed Nov 11, 2009 10:37 am
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 13313

Re: v3.X uptime challenge

i found i mt box in our network with a nice uptime....
by odie
Fri Nov 06, 2009 8:36 pm
Forum: General
Topic: v3.X uptime challenge
Replies: 55
Views: 13313

Re: v3.X uptime challenge

hello everybody.... i found an old forgotten lancom ptp link in our network with a nice uptime on one end more then 4 years.... this box has not found its way into our dude so never got an update and never went down..... and has never been changed to an mt box........... ( LANCOM L-54ag Wireless 5.0...
by odie
Sun Aug 02, 2009 7:52 pm
Forum: General
Topic: When OSPF will work on 532 platform?
Replies: 1
Views: 478

Re: When OSPF will work on 532 platform?

if you dont show us your config nobody can help -
and its for sure no rb532 problem
by odie
Wed Jul 15, 2009 10:39 pm
Forum: General
Topic: v3.26 Released
Replies: 44
Views: 5447

Re: v3.26 Released

mikrotik guys cannot test all possible configurations
my testboxes are running without any error !!!!
by odie
Wed Jul 15, 2009 9:42 pm
Forum: General
Topic: v3.26 Released
Replies: 44
Views: 5447

Re: v3.26 Released

why do all of you just install new software without testing it with your configuration somwhere near you?????
and then blame someboby else for that....
i dont think that there is any urgent need to update a router as far as 600km away with a brand new untested release ...
by odie
Sat Jul 04, 2009 10:18 pm
Forum: Scripting
Topic: UPS power monitor script errors
Replies: 6
Views: 2804

Re: UPS power monitor script errors

copy the files you can download onto your router via winbox ond then do an "Import" of that file on the local console this keeps the syntax. we have seen problems when you just copy and paste the script into the script editor. and dont forget to set the sceduler to start the ups script every few min...
by odie
Mon Jun 15, 2009 7:46 am
Forum: Beginner Basics
Topic: Which is the best Radius Manager For Mikrotik!!!
Replies: 3
Views: 1889

Re: Which is the best Radius Manager For Mikrotik!!!

we use aradial with ms-sql backend and have a self built implementation into microsoft NAV ( Navison)
with fully atomated billing (volume and bandwith based internetconnects including automated billing of overtraffic) and complete voip billing from an ansterisk log file ....
by odie
Fri Mar 27, 2009 10:58 pm
Forum: General
Topic: Monitoring battery voltage on solar panels
Replies: 13
Views: 6049

Re: Monitoring battery voltage on solar panels

Soaring_Volt.jpg
here we go
by odie
Fri Mar 27, 2009 10:36 pm
Forum: General
Topic: Monitoring battery voltage on solar panels
Replies: 13
Views: 6049

Re: Monitoring battery voltage on solar panels

but you could run the dude on one of your routerboards ?
so you dont need to have an extra box running ?
dont you have some monitoring running somewhere ?
by odie
Fri Mar 27, 2009 10:18 pm
Forum: General
Topic: Monitoring battery voltage on solar panels
Replies: 13
Views: 6049

Re: Monitoring battery voltage on solar panels

why not using the dude und poll the voltage via snmp ??
works great
this is th oid you have to look at and multiply it with 0.1
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.8.0
by odie
Sat Jan 03, 2009 10:42 am
Forum: Wireless Networking
Topic: Can I extend POTS over IP?
Replies: 7
Views: 2432

Re: Can I extend POTS over IP?

have a look at http://www.wut.de they have really good digital I/O stuff
by odie
Mon Dec 08, 2008 10:30 am
Forum: General
Topic: RouterOS v3.17, v4.0beta1, The Dude v3 released
Replies: 57
Views: 16110

Re: RouterOS v3.17, v4.0beta1, The Dude v3 released

thanks a lot !!!
by odie
Sun Nov 16, 2008 9:31 pm
Forum: RouterBOARD hardware
Topic: SOLVED Solar Power Solution for RB433
Replies: 42
Views: 16606

Re: Solar Power Solution for RB433

you only can use about 80% of the daylight - as long as your panels are fixed
the pax power of a solar panel is alwas given with 25°C panel temteratur - when they get hotter the
output goes down
only about 65 to 70% of the energy is loaded int the battery ...
by odie
Sun Nov 16, 2008 5:45 pm
Forum: RouterBOARD hardware
Topic: SOLVED Solar Power Solution for RB433
Replies: 42
Views: 16606

Re: Solar Power Solution for RB433

you will need at least twice the panel power - better would be 24V 120W
by odie
Fri Oct 17, 2008 12:20 am
Forum: RouterBOARD hardware
Topic: ros 3.15 is out
Replies: 15
Views: 3458

Re: ros 3.15 is out

speed.jpg
very cool speed with 3.15 - even more then the eths are built for on the rb532 ;-))
this showed at least as log as it took me to see it and make a screenshot ...
it has slowed down again ;-(
by odie
Sat Oct 11, 2008 12:47 am
Forum: General
Topic: RB532A - Loosing interfaces after upgrade to 3.14 and FW2.17
Replies: 4
Views: 1058

Re: RB532A - Loosing interfaces after upgrade to 3.14 and FW2.17

only downgrade firmware not OS - you can find it on routerboard.com
by odie
Fri Sep 26, 2008 4:07 pm
Forum: Wireless Networking
Topic: 3.14 problems with channel list
Replies: 10
Views: 2493

Re: 3.14 problems with channel list

but also when i use 20mhz mode 5 mhz channels ar taken !!
if so - you loose connection !
by odie
Fri Sep 26, 2008 1:22 pm
Forum: Wireless Networking
Topic: 3.14 problems with channel list
Replies: 10
Views: 2493

Re: 3.14 problems with channel list

the problem is that with radar dedection there are also channesl choosen that the clients can't connect because they cant change thair channels in 5mhz steps !!!!!
by odie
Mon Sep 22, 2008 12:49 pm
Forum: RouterBOARD hardware
Topic: ros 3.14 torrent is out but no seed since friday :P
Replies: 27
Views: 3363

Re: ros 3.14 torrent is out but no seed since friday :P

99,8% here and no seeds also ;-(
by odie
Sun Aug 31, 2008 1:37 pm
Forum: General
Topic: Anyone have a v2.8 rb500 image?
Replies: 2
Views: 873

Re: Anyone have a v2.8 rb500 image?

i think there was not ros 2.8x for rb500 !!
by odie
Sat Aug 30, 2008 3:32 pm
Forum: The Dude
Topic: New Dude version released: v3.0rc1
Replies: 25
Views: 7600

Re: New Dude version released: v3.0rc1

not the download file is the problem - the antivirus software !!
having no probems here .....
by odie
Mon Aug 25, 2008 10:31 pm
Forum: General
Topic: OSPF Problems when upgrading to V3 using 3.13
Replies: 3
Views: 1198

Re: OSPF Problems when upgrading to V3 using 3.13

we are running 2.9.50 and 3.x witn nearly no problem ...
only had to reboot x86 with 2.9.50 as id did not want to change routes when ospf said..
now its running ok since 2 weeks and has benn running before for about 5 month
problmes where only when i had been playing around too much....
but no OSPF V3
by odie
Sat Jul 26, 2008 12:07 am
Forum: RouterBOARD hardware
Topic: Crossroads Is locked ..
Replies: 7
Views: 2602

Re: Crossroads Is locked ..

i dont know what you are missing.....
if no input ther will be no output...
did you have a look into the manual ?
by odie
Wed Jul 23, 2008 9:25 am
Forum: RouterBOARD hardware
Topic: If you have a RB133C, read here please.
Replies: 17
Views: 4037

Re: If you have a RB133C, read here please.

we have changed back to 2.9.51 on all off the 1xx boards we are running. it seems that they cannot handle the load and are allways close to 100% load and then reboot. but on all other boards 3.x is running ok .... we had slight troubels with some rb 532 upgraded from 2.9.s versions - but after reset...
by odie
Wed Jul 09, 2008 12:18 pm
Forum: RouterBOARD hardware
Topic: 3.11: Kernel failure still here...
Replies: 7
Views: 2737

Re: 3.11: Kernel failure still here...

same problems here.... the only stable version on our rb 1xx is 2.9.xx none of the 3.x are running as we would like or they should do.... i think the boards have not enough cpu power as they allways go up to 100% load on doing nearly nothing, only 1 rb52 with 1 or 2 clients and no noise imunity acti...
by odie
Wed Jun 18, 2008 3:36 pm
Forum: Wireless Networking
Topic: problem with bandwidth on using two cards at the same time
Replies: 6
Views: 1268

Re: problem with bandwidth on using two cards at the same time

are the cards sharing the same interupt ?
by odie
Sat Jun 14, 2008 12:44 pm
Forum: RouterBOARD hardware
Topic: RB532A is not good at MKT ver 3.9 ?
Replies: 21
Views: 3842

Re: RB532A is not good at MKT ver 3.9 ?

we had a simmilar problem with a rb532r5 here - the board was running fine on 3.4 until ip upgraded it to 3.10 it startetd to reboot every 10 to 20 minutes - we did a downgrade - same problem still.... as the log showed that the board was rebootet by the watchdog i turned the watchdog of nice result...
by odie
Wed Jun 04, 2008 8:02 pm
Forum: The Dude
Topic: Vista Support
Replies: 16
Views: 4349

Re: Vista Support

why dont you use a mikrotik system as dude server - that is much easier and does not make any troubels....
vista does has many voodoo things for using it reliabe monitoring system...
also the mt licence is cheaper then a vista home version .....
by odie
Wed Apr 16, 2008 3:30 pm
Forum: RouterBOARD hardware
Topic: Netinstall 3.7 destroys RB532(A)??
Replies: 3
Views: 1828

Re: Netinstall 3.7 destroys RB532(A)??

use a good switch (hp, cisco, AT)between notebook and routerboard
helped here
by odie
Tue Mar 04, 2008 11:57 pm
Forum: RouterBOARD hardware
Topic: heat issues with RB600 ?
Replies: 16
Views: 3564

Re: heat issues with RB600 ?

hi we also have rb532 and rb 230 running on ros 3.x that reboot once in a while, they never did with ros2.x !! sometimes the while is shorter somtimes longer... but normaly there is no entry in the logs or any supout file.... some other boards run without problmes - so i think that is just a softwar...
by odie
Mon Mar 03, 2008 11:42 pm
Forum: RouterBOARD hardware
Topic: Need help on UPS battery monitoring for routerboards
Replies: 31
Views: 9588

Re: Need help on UPS battery monitoring for routerboards

hello everybody the modules should be availiable in the onlineshop at http://shop.evonet.at in the next days a wireing paln will be on the website, in a few days also and some updated scripts the powersupplies (AD-55 aor AD 155A) which suit to our module can be found at http://www1.schukat.com/schuk...
by odie
Tue Feb 26, 2008 9:47 am
Forum: RouterBOARD hardware
Topic: Need help on UPS battery monitoring for routerboards
Replies: 31
Views: 9588

Re: Need help on UPS battery monitoring for routerboards

we built a battery monitoring module an scripts for it
and in addition with powersupply you have your low cost ups talking to mikrotik...
http://www.stone-rich.at/dl/str-ups/default.htm
regards
by odie
Mon Jan 14, 2008 9:11 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49743

Re: Huawei usb 3g modems (used by vodafone)

it is running with E220 !!!!!
after a clean system reset and new config in rc14 on a rb230 it is running
absolutly the same config on it !!!
by odie
Fri Jan 11, 2008 11:52 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49743

Re: Huawei usb 3g modems (used by vodafone)

this is the modem log from my xp workstation dialing in with the same usb modem ... there you can see the connect after the dial in Senden: ATDT*###<cr> never shows the real number it dials *99# sorry for german - dont have any englisch wks here 01-11-2008 10:47:34.312 - Abschnitt in Modeminformatio...
by odie
Fri Jan 11, 2008 11:24 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49743

Re: Huawei usb 3g modems (used by vodafone)

here it is add add-default-route=yes allow=pap,chap comment="" dial-command="atd" \ dial-on-demand=no disabled=no max-mru=1500 max-mtu=1000 \ modem-init="at+cgdcont=1,\"IP\",\"steinmann.A1.net\"" mrru=disabled \ name="UMTS-01" null-modem=no password="xxxxx" phone="*99#" port=umts \ profile=umts use-...
by odie
Fri Jan 11, 2008 10:32 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49743

Re: Huawei usb 3g modems (used by vodafone)

sure i did !!
but doing all this on my notebook by hand in hyperterinal it works - after dialing and sendig the atd*99# there comes a connect answer
not with Ros
also tried with 2.9.50 - same problem
by odie
Fri Jan 11, 2008 10:12 am
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49743

Re: Huawei usb 3g modems (used by vodafone)

hi i also tried it with rc14 but do not get a connect. thats all i get - then it starts again trying to dial in ....... echo: async,debug umts: sent ATH echo: async,debug umts: rcvd OK echo: async,ppp,info UMTS-01: initializing modem... echo: async,debug umts: sent at+cgdcont=1,"IP","myapn.A1.net" e...
by odie
Fri Oct 26, 2007 7:18 pm
Forum: RouterBOARD hardware
Topic: Huawei usb 3g modems (used by vodafone)
Replies: 60
Views: 49743

Re: Huawei usb 3g modems (used by vodafone)

did anyone get the Huawai USB E220 running ?
my rb230 does not see it anymore
with RC7 it was shown unter resources/USB
now its gone....
by odie
Wed Oct 03, 2007 6:19 pm
Forum: General
Topic: RouterOS v3.0rc6 Released
Replies: 26
Views: 6439

Re: RouterOS v3.0rc6 Released

i think a found a bug in rc6.... after installing the dude package on a rb 333 there was no webserver answering anymore and no services where shown in Ip Service list after disabling the dudepakage the webserver was running again ... an one more - activating the ntp client gives mit this error: "Cou...
by odie
Sat Sep 15, 2007 6:11 pm
Forum: Scripting
Topic: A script to watch the battery voltage?
Replies: 15
Views: 6935

Re: A script to watch the battery voltage?

the module is tiny - a bit larger then a wireless module - should fit with a short serial cable and when you put only the 2 pairs of the network cable with data into the rj45 plug an the other 2 pairs (blue=+/brown=-) into a plug for the powerjack you have won ... or just use a rj45 double connector...
by odie
Sat Sep 15, 2007 10:16 am
Forum: Scripting
Topic: A script to watch the battery voltage?
Replies: 15
Views: 6935

Re: A script to watch the battery voltage?

hi you cant monitor the voltage directly but you can messure the input voltage - if you split it from poe and just plug it in into the power jack should work with our module that you can plug into the serial port a new version oft the voltage/temp control script will be postet on wiki in e few days ...
by odie
Sat Jun 23, 2007 2:52 pm
Forum: Scripting
Topic: A script to watch the battery voltage?
Replies: 15
Views: 6935

Re: A script to watch the battery voltage?

hi

should be run every minute or fewer - as you like it ...
i ll work on an englih version soon..
by odie
Fri Jun 22, 2007 8:04 am
Forum: General
Topic: Loopback Interface von 2.9.x?
Replies: 5
Views: 1079

Re: Loopback Interface von 2.9.x?

here is what you are looking for..

/ ip firewall nat
add chain=srcnat dst-address=radius-server-IP protocol=udp dst-port=1812-1813 \
action=src-nat to-addresses=source-ip-addrress to-ports=1812-1813 comment="" \
disabled=no
by odie
Thu Jun 07, 2007 7:56 pm
Forum: RouterBOARD hardware
Topic: Monitoring of battery voltage via winbox
Replies: 55
Views: 16561

Re: Monitoring of battery voltage via winbox

we use powersupplies that have a batt charger/ups function and also have a low voltage cut off http://www.meanwell.com/search/AD-55/default.htm and for this we bult a small box that monitors batt voltage, line voltage and temperatur it also regualtes a fan up to 12V/20W of power this thing talks to ...
by odie
Tue Jun 05, 2007 9:39 am
Forum: General
Topic: Winbox with Nokia N95 Symbian OS. Can I?
Replies: 4
Views: 2736

Re: Winbox with Nokia N95 Symbian OS. Can I?

or putty - runs fine on my n95 ;-))
by odie
Mon Jun 04, 2007 10:49 am
Forum: Scripting
Topic: A script to watch the battery voltage?
Replies: 15
Views: 6935

Re: A script to watch the battery voltage?

here it is - it also works with apc smart ups ..... :set sysname [/system identity get name] :set datetime ([/system clock get date] . " " . [/system clock get time]) # Erster Lauf und Flags noch uninitialisiert? :if (("-" . $flagonbatt)="-") do {:global flagonbatt 0} :if (("-" . $flagbatlow)="-") d...
by odie
Sun Jun 03, 2007 11:59 pm
Forum: Scripting
Topic: A script to watch the battery voltage?
Replies: 15
Views: 6935

Re: A script to watch the battery voltage?

a good solar charge controller should have a undervoltage cut of we built a smal thing that can monitor the line voltage/ batt voltage and temp in connection with a small powersupply that has a charger for a battery included we use these as powersupplies with monitoring for our stations it also work...
by odie
Sun May 27, 2007 11:49 am
Forum: Wireless Networking
Topic: Rb133C config for a client
Replies: 15
Views: 2280

Re: Rb133C config for a client

or use V3 beta - there you can bridge wireless-ethernet
by odie
Sat May 26, 2007 1:11 am
Forum: Wireless Networking
Topic: need advice - dual CPU PIII machines to buy or not -ROS3.x
Replies: 9
Views: 1907

Re: need advice - dual CPU PIII machines to buy or not -ROS3.x

use routerboard 14 -> pci to 4 mini pci - so you dont need 5 pci slots !!
by odie
Sat May 26, 2007 1:06 am
Forum: The Dude
Topic: SNMP and UPS status
Replies: 10
Views: 9254

Re: SNMP and UPS status

we also built a small box that is monitoring input voltage and batt voltage und speaks with the mikrotik-ups-monitor
it also monitors the temperatur and turns a fan on an d off and sends email in case of overtemperature
by odie
Fri May 25, 2007 11:08 am
Forum: The Dude
Topic: SNMP and UPS status
Replies: 10
Views: 9254

Re: SNMP and UPS status

i did not find anything about it ;-((
but wrote a script that works setting up/down a second ip to get powrfail alarm and also sends emails;-))
by odie
Fri May 04, 2007 6:54 pm
Forum: General
Topic: how to keep people from trying to log in mikrotik via ftp
Replies: 10
Views: 2883

ever heared about firewall rules ?

x.x.x.x/x stands for the adresses from where you want to config your router

/ ip firewall filter
add chain=input src-address=x.x.x.x/x action=accept
add chain=input action=drop \
comment="Drop anything else"
by odie
Tue May 01, 2007 1:27 pm
Forum: Wireless Networking
Topic: Spectrum Analyzer
Replies: 14
Views: 3150

if you need affordable spectrum analyzers have a look at http://www.aaronia.de/ we are using it a lot and found many hf problems with it allready like videocams, audiotransponders, and a lot more that have much more power then they are allowed to have... and also a problem with a 3G Basestation that...
by odie
Fri Apr 27, 2007 8:07 pm
Forum: General
Topic: SmartUPS monitoring not working well
Replies: 4
Views: 1240

you need to specify serial port speed to 2400 and then it should work
by odie
Wed Apr 11, 2007 8:02 pm
Forum: Wireless Networking
Topic: NSTREME 2 on Single Rootenna?
Replies: 20
Views: 5078

ccrum - did you try "nstream dual" on your installation or just e simple link ?
by odie
Thu Feb 22, 2007 8:59 pm
Forum: Wireless Networking
Topic: R52 in windows xp laptop with third party driver
Replies: 8
Views: 1551

the problem is that there is no possibility to change the contry !
or at least not to find...
by odie
Thu Feb 22, 2007 5:51 pm
Forum: Wireless Networking
Topic: R52 in windows xp laptop with third party driver
Replies: 8
Views: 1551

that is the problem - not to set ccontry - so we cant use frequencies allowed in austria in G an A band
the card uses USA channel settings
2412 to 2462 only - not higher can be used
and 5500 to 5700 also cannot be used...
by odie
Tue Feb 20, 2007 9:26 pm
Forum: Wireless Networking
Topic: R52 in windows xp laptop with third party driver
Replies: 8
Views: 1551

and can you change countr settings ?
by odie
Mon Feb 19, 2007 1:56 pm
Forum: Wireless Networking
Topic: 3 Mini-PCI board, Not rb153
Replies: 16
Views: 3394

done
by odie
Mon Feb 19, 2007 1:52 pm
Forum: Wireless Networking
Topic: 3 Mini-PCI board, Not rb153
Replies: 16
Views: 3394

and why dont you just say what has been changed and leave the decision to me what to do with the boards ?
by odie
Mon Feb 19, 2007 1:46 pm
Forum: Wireless Networking
Topic: 3 Mini-PCI board, Not rb153
Replies: 16
Views: 3394

and would it be possible to just describe the fix or changes ?
by odie
Mon Feb 19, 2007 1:14 pm
Forum: Wireless Networking
Topic: 3 Mini-PCI board, Not rb153
Replies: 16
Views: 3394

but we have the same problems with the 153 boards none of the 10 we bought run stable with 3 cards and "high" load the higher the load the more often the boards reboot with only 3 clients connted the uptime climbed to max 10 days with >20 clients connected on only 1 wlan card (a second card was disa...
by odie
Sat Feb 17, 2007 1:59 pm
Forum: General
Topic: Routerboards and NTP
Replies: 6
Views: 1707

i think you miss a real ntp server - i think w2k3 server only answers to his domainmembers...
by odie
Thu Feb 15, 2007 10:20 pm
Forum: General
Topic: Some websites unavailable - PPPoE MTU MRU
Replies: 5
Views: 2433

did you change the mtu from the ethernet port or from the pppoe client interface ?
did you try a transparent proxy as workaround ?
by odie
Mon Feb 12, 2007 9:55 am
Forum: General
Topic: all features of winbox in webbox
Replies: 14
Views: 4898

whats the problem with telnet or ssh - this is quick, works on all plattforms including pda and symbian, is fully implemented and also in colours in ROS-V3 - that should be enough colours for wintendo admins ;-))
by odie
Sun Feb 11, 2007 3:36 pm
Forum: General
Topic: New Intel chipset
Replies: 2
Views: 1548

we use LV-675 mainboard with Pentium and 2 Mini PCI and one Std PCI slot, and in the 44 pin IDE we plug the IDE Flash disk
as powersupply we use 6-to 26V "PicoPSU" power supply
this is running fine for weeks now...
by odie
Sat Feb 10, 2007 5:09 pm
Forum: General
Topic: D18 J3/J4 and 48vDC
Replies: 4
Views: 1340

the board is running without it also ....
by odie
Tue Feb 06, 2007 7:59 pm
Forum: General
Topic: BUG !!!
Replies: 11
Views: 2130

there is nothing to repair - is just a counter overflow ...
by odie
Sat Feb 03, 2007 12:02 pm
Forum: RouterBOARD hardware
Topic: New Routerboards?
Replies: 71
Views: 18719

why dont you use mini itx boards like the Commell LV-675D-R it has 2 Mini PCI Slots and also one std PCI Slot 1GB eth Interface and also one 44pin IDE slot - we use a PICOPSU-60 ATX powersupply that has an input voltage vom 6 to 26V and a max of 60W and is not much bigger then the atx power connecto...
by odie
Fri Jan 12, 2007 6:03 pm
Forum: Wireless Networking
Topic: 240Km link with RB532 @ 20Mbits
Replies: 62
Views: 42289

we did some locations with solar power only is a bit of calculating - how long do you want the hardware to run on bad weather - what is the wattage of the hardware ? do you want to to add more hardware in future ? in addition with a wind generator and in a windy location you can save money for battr...
by odie
Sun Jan 07, 2007 1:41 pm
Forum: General
Topic: Can anyone remomber how mant Beta's V2.9 had?
Replies: 3
Views: 1480

19 betas and 10 RCs i think - as my file archive shows...
by odie
Sat Jan 06, 2007 12:15 pm
Forum: General
Topic: OSPF and PPPOE nightmare!
Replies: 42
Views: 19018

i think this is not a matter of the manual but of basic ospf understandings you can find some info here: http://www.inetdaemon.com/tutorials/internet/ip/routing/ospf/index.shtml or even more info under: http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ospf.htm and http://www.cisco.com/univer...
by odie
Sun Dec 24, 2006 10:09 am
Forum: Wireless Networking
Topic: wireless link uptime
Replies: 3
Views: 1004

here are the details....
http://www.funk-internet.at/bilder/statistik.jpg
is for the whole uptime of >210 days
the link is set to 6Mbit
by odie
Sat Dec 23, 2006 8:56 pm
Forum: Wireless Networking
Topic: wireless link uptime
Replies: 3
Views: 1004

wireless link uptime

how long is the uptime of your wirelees links ?
i just found one wich i think is quite ok ....
http://www.funk-internet.at/bilder/wireless-uptime.jpg

merry christmas to all of you ...[/url]
by odie
Fri Dec 22, 2006 2:11 pm
Forum: General
Topic: 2.9.38
Replies: 3
Views: 1133

did anyone test the pppoe server in 2.9.38 with > 250 useres concurrent ?
is the problem with the ghost interfaces solved ?
i dont dare to upgrade....
on my other devices 2.9.38 seems to run without any problems ....
by odie
Sun Dec 17, 2006 11:45 am
Forum: RouterBOARD hardware
Topic: Geode SC1100
Replies: 5
Views: 2616

we are running aradial radius an have nearly 100% mikrotik OS
works fine and also support from aradial is good
by odie
Tue Nov 28, 2006 11:40 pm
Forum: RouterBOARD hardware
Topic: Routerboard CPE
Replies: 6
Views: 2278

when?
by odie
Fri Nov 24, 2006 4:07 pm
Forum: RouterBOARD hardware
Topic: SIGWATCH on RB112 - again...
Replies: 6
Views: 2301

but only "smart ups" are supported not the old ones wich only had a sort of "sigwatch" output and there is no need to power a routerboard with at least a 700VA ups wich is the smalles APC product supporting serial smart protokol !! tha produces only heat and wastes battery energy i would be much mor...
by odie
Fri Nov 24, 2006 1:17 pm
Forum: RouterBOARD hardware
Topic: SIGWATCH on RB112 - again...
Replies: 6
Views: 2301

is this a limitation on rb112 oder on the complete mips paltform ?
or why dont you just support simple ups monitoring
that would at least give 2 signal states "ups on battery" and "low battery"
by odie
Thu Oct 26, 2006 6:45 pm
Forum: General
Topic: Scheduler problems - attn. MT support
Replies: 14
Views: 2719

i have the same problem here on differnet versions of 2.9 - if i set the start time to the actual date then it normaly works until i reboot the box
then no more scedueled script is started - after setting the date back to the actual date it works again ...
so do not reboot the boxes ;-))
by odie
Fri Oct 20, 2006 9:51 am
Forum: General
Topic: Does any one here use Alepo with Mikrotik???
Replies: 6
Views: 1448

we use aradial also without any problems - a few years ago alepo and aradial seemed to be the same i think....
by odie
Fri Sep 22, 2006 9:08 am
Forum: General
Topic: Low power motherboard?
Replies: 3
Views: 1481

as your budget is flexible than have a look at http://www.lippert-at.de/index.php?id=95
mini itx with pentium mobile, and single voltage supply, no fans
this is a real good one - we use it as multi PTP Termination on one of our towers and have 7 PTP links connectetd on it with nstream....
by odie
Thu Sep 07, 2006 10:48 pm
Forum: General
Topic: routing filter doesn't work on 2.9.28 and 2.9.29
Replies: 6
Views: 1846

here it looks like that only when the box is starting the filters dont work
when the box is up allready an then you add som ip that schoudl be bloked by the filter it works
but wehn i reboot the box all the unwanted ips are announced athe the first ospf sturtup ;-((
by odie
Wed Aug 23, 2006 1:42 pm
Forum: General
Topic: Which Radius Server for Windows?
Replies: 5
Views: 1573

http://www.aradial.com works fine here since years
by odie
Sun Aug 20, 2006 7:59 pm
Forum: RouterBOARD hardware
Topic: power supply problems
Replies: 6
Views: 2245

hi no statistic about worn out power supplies - we did not buy to many of those because i did not like them from the beginning - the become to hot !! we had no problems in winter but now when its hot outside they die.... so we orderd our own power supplies at http://www.dehner.net and we had not a s...
by odie
Sat Aug 19, 2006 6:12 pm
Forum: RouterBOARD hardware
Topic: power supply problems
Replies: 6
Views: 2245

no
just have replaced one an hour ago ...
by odie
Sat Aug 19, 2006 2:46 am
Forum: Wireless Networking
Topic: New Link 60kms, 3 hops, all Mikrotik
Replies: 5
Views: 3288

how long are the links ?
we have a few 17 to 23 km links with about 25 to 30db signal to noice and also 30db power at the antennas (huber&suhner 23dbiflat panel)
by odie
Sat Aug 19, 2006 2:34 am
Forum: The Dude
Topic: Moving elements between maps
Replies: 8
Views: 3148

i would like this too !!!
by odie
Mon Jul 31, 2006 11:04 am
Forum: Wireless Networking
Topic: Does the WLM54G support 5Mhz and 10Mhz correctly?
Replies: 2
Views: 1053

hi i did not try the 5 and 10 mhz channels but we hat other troubles with those cards used in an accesspoint. somtimes after a reboot or after changing config on those cards no or onle very few clients connect and those who connect have a very unstable connection. after a few on /offs of the interfa...
by odie
Wed Jul 05, 2006 7:24 pm
Forum: General
Topic: QoS on incapsulated traffic
Replies: 6
Views: 1616

so its seems to be time for the pppoe relay ;-))
any chance to make a package ?
by odie
Wed Jul 05, 2006 8:54 am
Forum: General
Topic: QoS on incapsulated traffic
Replies: 6
Views: 1616

same question here for traffic running in pppoe session - any possibility to mangle this traffic on a machine that is not the pppoe concentrator ?
we need to priorise voip traffic on our accesspoints - but the clietns are all connected via pppoe
any idea ?
by odie
Mon Jul 03, 2006 10:55 pm
Forum: The Dude
Topic: Feature Request: Chart range selection
Replies: 1
Views: 1470

and maybe a possibility to enter the correct scale and unit for the graph
by odie
Sun Jun 25, 2006 12:19 pm
Forum: The Dude
Topic: email function
Replies: 7
Views: 3482

dude also has a e-mail funktion
somtimes it helps to r-t-f-m
by odie
Tue Jun 13, 2006 2:57 pm
Forum: Wireless Networking
Topic: wireless client somtimes connect somtimes not ......
Replies: 3
Views: 1155

we tried it with dynamic settings, and with new rb532 boards new cards and allways the card in the bottom socket hast the problems....
this happens only to boards from the last delivery we got
never seen this on boards that are running for month now
by odie
Mon Jun 12, 2006 10:01 pm
Forum: Wireless Networking
Topic: wireless client somtimes connect somtimes not ......
Replies: 3
Views: 1155

wireless client somtimes connect somtimes not ......

hello in the last few days i found a strange problem - when saveing changes on wirelless settings then sometimes only a few clients connect - after doing the save again ore interface on/off the clients connect again or not .... sometimes it needs a few gos somtimes the clients are connected and no d...
by odie
Sat Jun 10, 2006 7:58 pm
Forum: Wireless Networking
Topic: routerboard 230 access
Replies: 3
Views: 924

take a serial cable and have a look at the serial console...
by odie
Thu Jun 08, 2006 9:43 pm
Forum: Wireless Networking
Topic: dropping connections as soon as data is transmitted
Replies: 7
Views: 1868

and the wireless cards will thank it and last longer....
by odie
Wed Jun 07, 2006 9:56 pm
Forum: Wireless Networking
Topic: WLM54g vrs CM9
Replies: 12
Views: 2978

tested on both connectors and both with setting a and b
no power out of the u-fl plug
on the rb532 directly it works !
by odie
Wed Jun 07, 2006 9:31 am
Forum: Wireless Networking
Topic: WLM54g vrs CM9
Replies: 12
Views: 2978

one other strange thing happend with wlm54g on a rb502 board they do not get power out of the u-fl plugs !! we tested this on 3 different rb502 and a few more wlm54g cards as long as you stay close to the accesspoint you cann connect with a client - but there is no power coming out of the antenna pl...
by odie
Sun May 28, 2006 6:52 pm
Forum: RouterBOARD hardware
Topic: routerboard 532 netinstall problem
Replies: 1
Views: 1393

formatting your nand should be possible in the new biso version - that should help
by odie
Sun May 28, 2006 6:49 pm
Forum: Wireless Networking
Topic: Issue with client Intel 3945abg
Replies: 27
Views: 6706

update the intel drivers to the last version or dont hide the ssid on the ap
the intel cards did not connect to Zyxel and Lancom APs when the ssid was hidden also
the driver update helped ....
by odie
Sat May 27, 2006 3:33 pm
Forum: General
Topic: Mikrotik RB 112 pppoe-client problem
Replies: 2
Views: 855

enable ppp-packet in system packages before
by odie
Mon May 22, 2006 7:10 pm
Forum: The Dude
Topic: export config on remote client
Replies: 2
Views: 1620

export config on remote client

the export of the config on the remote client on my workstation (xp/pro sp2) still crashes the whole client with dr watson, on my notebook same softwareconfig it is no problem...
on the "server" (it is only a w2k pro box) it is no problem also
by odie
Fri May 12, 2006 8:46 am
Forum: General
Topic: generate 2 bandwith queues via radius per pppoe client ?
Replies: 1
Views: 602

generate 2 bandwith queues via radius per pppoe client ?

is it possible to generate 2 fifferent bandwith queues with on pppoe login via radius attributes ?
one of the queues should be for standard internetaccess and the other one just to connect to the voip server with hight priority ?

or has anybody a better idea how to manage this dynamically ?

otto
by odie
Fri May 12, 2006 8:39 am
Forum: The User Manager
Topic: userman not working?
Replies: 7
Views: 5305

firefox and ie are working
opera does not !!
by odie
Wed May 10, 2006 12:15 am
Forum: The User Manager
Topic: user manager npk
Replies: 2
Views: 3013

user manager npk

it does not work here - getting an erron on trying to login
and the logfile sais " Fatal Error: feild to open DB: unable to open database file
any hints ?
by odie
Tue May 09, 2006 10:30 pm
Forum: Wireless Networking
Topic: Mikrotik wireless facts "problems" <-- sorry
Replies: 28
Views: 4880

i think gyys - that you have some serious config problems
here those boxes work really fine
maybe try to find the mistakes before criticising somebody else

if these boxes are as bad as you guys do then really nobody in the world would use them.....

think it over !!
by odie
Sun May 07, 2006 5:41 pm
Forum: General
Topic: More Radius options
Replies: 4
Views: 2750

good idea !
by odie
Sat May 06, 2006 7:03 pm
Forum: The Dude
Topic: Next release?
Replies: 4
Views: 1801

i still have a problem in exporting the config on a remote client (severals machines und systems)
then the client dies with a dr watson
on the server it is no problem ....
by odie
Thu May 04, 2006 9:44 am
Forum: Scripting
Topic: Scheduler runs job twice
Replies: 2
Views: 1196

i have seen this today also - i added a script to send config export and backupfile via e-mail every night from a few of my routers thos things came twice !! i´ll give it a look tomorrow gain - and chek it with the os versions as they are different from box to box today they are allready deleted ;-((
by odie
Thu May 04, 2006 9:36 am
Forum: General
Topic: Big PPPOE Problem
Replies: 7
Views: 1548

the problem is that the client does not really bridge everything - so only one pppoe session is working, we had those problems allready it might work when using standard ip entries, but not with pppoe packets. i think that the tiny arp-proxys in those devices are not able to handle anythig else then...
by odie
Mon May 01, 2006 6:23 pm
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3431

it was worth changeing the routers - no problems any more ....
and we only use zyxel now - just a few linksys are left - they are working also after some firmwareupdates.....
by odie
Sun Apr 30, 2006 10:18 am
Forum: General
Topic: A bunch of questions for my wisp operation
Replies: 19
Views: 3431

we have throwen out all the d-link routers at our clients and changed to zyxel and have no problems any more with pppoe - is is really running smooth we changed to pppoe over 3 years ago and i am sure it was the right way to go - all the config and accounting is done in the radius database via web i...
by odie
Fri Mar 31, 2006 9:02 am
Forum: General
Topic: PPPOE with Radius (what to use for extensive options)
Replies: 7
Views: 1784

by odie
Sun Mar 26, 2006 10:29 am
Forum: General
Topic: Upgrading from 2.8.28 to 2.9.18 and Interfaces Gone
Replies: 6
Views: 1398

witch packets did you use for upgrading ?
the all in one npk or the singel packets ?
by odie
Mon Mar 20, 2006 7:32 am
Forum: Wireless Networking
Topic: Client reconnects severals times per minute
Replies: 7
Views: 1743

install 2.9.17 that helps - we had a problem like this - is working now without problems....
by odie
Sun Mar 19, 2006 9:20 am
Forum: General
Topic: Feature Request
Replies: 1
Views: 666

and a radius cache separated for negativ and positive requests so that unauthorised wireless clients dont flood tha radius logs !!
by odie
Fri Mar 17, 2006 9:12 am
Forum: The Dude
Topic: Dude update
Replies: 5
Views: 2848

and also if rc6 is installed on the server the updates doesn't really work
on only one of 3 machines here in the office the update was done
on the other 2 (xp machines) the update started downloading and also restarted the dude - but then asked again if i would like to update .....
by odie
Thu Mar 16, 2006 9:28 pm
Forum: Wireless Networking
Topic: wireless and radius
Replies: 8
Views: 1765

wireless and radius

hi

we use radius authentication for our wireless clients.
is there a possibility to make the mikrotik box to cache positive or negative authentications for lets say 30 minutes ?
so that it does not flood the radius with the same request again and again ?

regards
otto
by odie
Thu Mar 09, 2006 8:56 am
Forum: Scripting
Topic: How to reset the log file and then backup it?
Replies: 10
Views: 3408

http://www.kiwisyslog.com/
there is also a freeware version ....
by odie
Mon Mar 06, 2006 2:44 pm
Forum: General
Topic: Radio signal diminishes over time
Replies: 4
Views: 927

enable periodic calibration in the wireless advanced menue
by odie
Sun Mar 05, 2006 7:39 pm
Forum: General
Topic: Feature Suggestion: VoIP ID
Replies: 3
Views: 2485

that sounds nice
would like to see somthing like the p2p filters for sip too
by odie
Sat Mar 04, 2006 10:01 am
Forum: General
Topic: PPPoE lockups around 200 users connected
Replies: 5
Views: 1470

what license level do you use ?
what kind of hardware ?
by odie
Sun Feb 26, 2006 6:11 pm
Forum: Wireless Networking
Topic: faustrating issues on performance
Replies: 22
Views: 5378

amps can help on ptp links for sure if you also use high gain antennas !!
but on AP / ptmp installations they are useless - only produce problems
we tried it out a few years ago .....

if you use good wireless hardware on both ends (antennas, cabels and cards) then everyting works trouble free !
by odie
Sat Feb 25, 2006 5:27 pm
Forum: General
Topic: 2.9.14 Released
Replies: 11
Views: 1989

i just changed back to 2.9.13 because one of my rb532 with 2x 2.4ghz and 1x 5ghz AP has been rebooted twice allready by the watchdog timer !!

never had this before
by odie
Thu Feb 23, 2006 8:16 pm
Forum: General
Topic: is PPPoE getting better in the 2.9.x?
Replies: 4
Views: 1128

up to about 300 concurrent connections on 2.9.12 on a P4 without no problems
by odie
Sun Feb 19, 2006 5:43 pm
Forum: Wireless Networking
Topic: Holes in bottom of outdoor box supplied with rb500
Replies: 38
Views: 5835

if you think that you can seal the box 100% then you are wrong !!! the box is breathing - the air expands when it is warmer and and collapses when it gets colder - so if there is no hole then the air comes through maybee the antenna or the powercabel - but it for sure comes in somewhere as averybody...
by odie
Sun Feb 12, 2006 5:15 pm
Forum: Wireless Networking
Topic: Atheros driver bug, system lock-up!!!!
Replies: 11
Views: 2996

not the driver is the problem - the via board makes the troubels !!
use mikrotik rb532 or itx boards from http://www.lippert-at.com for exampel they run smooth and have much more power......
by odie
Mon Feb 06, 2006 1:16 pm
Forum: General
Topic: problems upgrading to 2.9.12
Replies: 3
Views: 1334

i had the same problem and just rebootetd the box again than it upgraded
also happend with 2.9.11 e few days ago
by odie
Mon Jan 16, 2006 6:14 pm
Forum: General
Topic: Downloading files from MT using Winbox and webbox
Replies: 3
Views: 3105

seems to be a "hidden" feature
did not read about this in a manual...
thanks a lot for that hint....
by odie
Mon Jan 16, 2006 9:29 am
Forum: Wireless Networking
Topic: RB532 & RB502 Daughter Board Problem
Replies: 2
Views: 1173

we had loose soldering point on the rb532 once on the doughterboardconnector - just resolderd it and works fine ...
by odie
Sat Jan 14, 2006 9:20 am
Forum: General
Topic: Urgent! Problems with speed
Replies: 23
Views: 5745

try it with 2.8.28 we had the same problems here after upgrading to 2.9.x on serveral boxes pingtimes even climbed up to >3000ms this problem shows up only as long as clients are trying to connect - as long as they do not transfer any traffic they get disconnectetd after a few seconds - and this goe...
by odie
Thu Jan 12, 2006 12:20 pm
Forum: General
Topic: feature request for winbox loader!
Replies: 4
Views: 1471

but it would be easier to handel within the winboxloader .....
by odie
Thu Jan 12, 2006 11:00 am
Forum: General
Topic: feature request for winbox loader!
Replies: 4
Views: 1471

hello
this is good for our own network ...

but we have lots of customers that use mikrotik boxes that we dont want to monitor with dude - and also like to have some help via remote from us...
by odie
Wed Jan 11, 2006 9:38 am
Forum: General
Topic: feature request for winbox loader!
Replies: 4
Views: 1471

feature request for winbox loader!

would it be possible to a folders and subfolders for the entries in the winboxloader - that would make it easier to find the right machine....

regards
otto
by odie
Sun Jan 08, 2006 12:58 pm
Forum: General
Topic: radius server that handles pppoe and works on microsoft?
Replies: 6
Views: 1718

http://www.aradial.com
can handel all this, we use it here also
by odie
Sat Jan 07, 2006 9:42 am
Forum: General
Topic: PPPOE & Dlink routers
Replies: 5
Views: 2819

hi

we have changed to zyxel and dont have problems anymore,
only more then 100 d-link di514 and 604 in our office.......
does anyone wants to have them ?
by odie
Mon Dec 19, 2005 8:36 pm
Forum: General
Topic: mikortik not sending stop request to radius
Replies: 2
Views: 856

upgrade to the latest software version 2.9.10 .....
by odie
Mon Nov 21, 2005 2:09 pm
Forum: The Dude
Topic: show special Oid
Replies: 2
Views: 2228

i have added the signal level oid to the services - so i have at least a message when the level is below a value
but it would be nice to have the value shown like it is done with the actual speed of an link - just to have an overview

regards
otto
by odie
Sun Nov 20, 2005 11:12 am
Forum: The Dude
Topic: show special Oid
Replies: 2
Views: 2228

show special Oid

Hi

is there going to be a possibility to show a special Oid - RX Level for a wireless link for exampel like showing the actual speed of a link

regards
by odie
Sun Nov 20, 2005 11:09 am
Forum: The Dude
Topic: Parents
Replies: 4
Views: 2418

Parents

hi

when i set "parents" in a long hirarchical tree - do i have to set only de box in front of me or do i have to enter the whole way to that box ?
so when the tree grows the list also ?

regards
by odie
Sun Nov 20, 2005 11:06 am
Forum: The Dude
Topic: my dude keeps chrashing
Replies: 14
Views: 5345

beta14 is running really fine now
installed as service with srvany on an w2000 box - did not crash since 2 days
;-))
discovering works also without problems
by odie
Thu Nov 17, 2005 1:07 am
Forum: The Dude
Topic: Instant Crash V0.1 beta 13
Replies: 5
Views: 2778

same here - but the dudes.exe - the server is running
only the config tool crashes ...
by odie
Mon Nov 14, 2005 4:37 pm
Forum: The Dude
Topic: my dude keeps chrashing
Replies: 14
Views: 5345

i did my config first on discovering alle divices with my notebook on an official ip adress (no nat oder firewall) an then adapted the thing a bit this worked fine a while this is a first tim installation - no upgrad also the config is clean then i tried to discover the next part of my network in a ...
by odie
Wed Nov 09, 2005 8:59 pm
Forum: The Dude
Topic: my dude keeps chrashing
Replies: 14
Views: 5345

my dude keeps chrashing

hello the larger my network map is growing the more often the dudes.exe crashes has anybody an idea what the dude thing might not like in his maps? i do only ping 98% my host and only for 6 machines there are more services to check. i also set it up on an other machine and imported the config - same...
by odie
Sat Nov 05, 2005 9:14 pm
Forum: The Dude
Topic: Howto Split Maps ?
Replies: 0
Views: 1745

Howto Split Maps ?

hello

is there a way to split maps in two or more submaps ?
or just copy a part of a map into a submap ?
I cant find a simpel way without deleting and making it new ;-(

thanks
otto
by odie
Wed Oct 26, 2005 10:10 am
Forum: General
Topic: mikrotik meeting in prague
Replies: 4
Views: 1538

1: packerfiltering/bandwithmanagemnet/shaping/qos
2: allready booked for 2
3: i think we could talk about wireless problems and solutinons...

regards
otto
by odie
Sun Oct 23, 2005 6:25 pm
Forum: General
Topic: Many PPPoE Disconnects
Replies: 6
Views: 1514

why do you use Eoip ? what hardware do you use ? i would prefere Vlans - we do it this way here with about 50 APs and up to >250 concurrent users on one of the pppoe servers and have no probelems. all the Vlans terminate on the pppoe server each vlan has one eth - and one pppoe server per eth about ...
by odie
Sun Oct 23, 2005 9:59 am
Forum: General
Topic: Many PPPoE Disconnects
Replies: 6
Views: 1514

what pppoe server do you use - mikrotik ?
whitch version ?
by odie
Sun Sep 25, 2005 9:52 am
Forum: General
Topic: MT pppoe and radius
Replies: 3
Views: 1208

radius

try http://www.evolynx.com if you want it on a windows machine
this works fine here
by odie
Wed Aug 17, 2005 10:43 pm
Forum: General
Topic: low wireless signal level after upgrad to rc10
Replies: 2
Views: 1440

low wireless signal level after upgrad to rc10

today i tried to replace a rb230 with 4x cm9 and router-OS 2.8.28 with a rb230 and 4x RB52 and router os 2.9.rc10 on my old configuration there are only 4 clients that have a signal level equal or worse then -90db all others are much better when i changed to the new box there where lots of clients t...
by odie
Sun Jun 05, 2005 5:36 pm
Forum: General
Topic: Radius server MAC authentication
Replies: 1
Views: 827

Radius server MAC authentication

hi where does the password com from when i use the Radius server MAC authentication anwhere can i change it ? i tried it on 2 RB230 and there came different passwords the last one is "7j" ? an orinoco and lancom APs the shared secret is sent as password and I cant find anything to change it on the m...
by odie
Sun Jun 05, 2005 8:21 am
Forum: General
Topic: AP Problem after upgrade to 2.9 rc4
Replies: 1
Views: 826

AP Problem after upgrade to 2.9 rc4

Hello we upgraded one RB230 with 4 AR5213 boards tu 2.9 RC4 and then only about 70% of the clients connected permanently to the ap - some the others just showed up für few seconds and then disappeared . also the numer af connected clients changes permanently by about 20 users. after playing around f...
by odie
Sun Jun 05, 2005 7:34 am
Forum: General
Topic: How to limit Bandwidth to PPPoE clients?
Replies: 5
Views: 3619

Hello we just send the bandwith via radius to our mt routers like this: RateLimit=768k/900k 768k/1400k 768k/768k 15/15 that creates a simple queue per user und deletes it when the user logs off Format is as follows: rx-rate[/tx-rate] [rx-burst-rate[/tx-burst-rate] [rx-burst-threshold[/tx-burst-thres...