MikroTik

odie

we have about 60m Cable and a SUB10 Gigbit microwave unit at the end, no errors there....

odie

same problem here as well, 596 FCS Errors in 30 days is not sooo much, but is not ok !! no errors on RB1100 before name="ether11" driver-rx-byte=5 347 481 269 413 driver-rx-packet=8 213 181 544 driver-tx-byte=2 765 326 209 750 driver-tx-packet=7 177 303 996 rx-bytes=5 380 334 039 817 rx-pa...

odie

odie

same problem...
6.18 and 6.22 also...

odie

Ours are not as hot.... a bit higher then the mainboardboard temp... system health: fan-mode: auto use-fan: main active-fan: main cpu-overtemp-check: yes cpu-overtemp-threshold: 100C cpu-overtemp-startup-delay: 1m voltage: 24V current: 1599mA fan-speed: 5688RPM fan-speed2: 5875RPM temperature: 40C c...

odie

i had the same problem on a box (RB532) up a mountain - disabled security and advanced tools then cpu was normal...

odie

i never tried - but i will check also ...
but now i am off for skiing...

odie

hi
do you use queues automatically set by ppp profile or radius ?
if yes -in the default used "default-small" set "Queue Size" to 50 packets or even higher

odie

Serial with UPC smart ups
works on 5.x never run in 6.x after upgrade

odie

yes - same problem
works only in 5.xx - never got it running in 6.x

odie

Have the same Problem on rb1100 AHx2

odie

they did not tell the year !!!

odie

they did not tell us the year -just the month ...

odie

easy to use radius server and worth its money, we also bulit a billing and management solution based on microsoft navision based on this radius
www.evolynx.com

odie

sent it to support this morning !!
including supout

odie

the config works until rc13....
seems to be not so wrong...
and also works on >100 other MT boxes

odie

it is a release candidate for sure - but major things like Vlans should work....
and also with 5.24 we have even more sudden reboots of the boxes and no answers or fixes
and MT sell routers where you cant use a final ROS ( CCR )

odie

after upgrade from rc13 no more connectivity via Vlan on RB1100AHx2 it is a shame that MT does not really test those releases !!! i would like to get some money for testing and wasting time with this buggy stuf ! it seems that Mikrotik OS gets worse from release to release sorry but i have enought !...

odie

we have unplanned reboots with this release- just habbend again a few minuntes ago - on RB1100AhX2 used as pppoe concentrator and running in an OSPF network. 4 different boxes - even some without pppoe reboot - so it seems to be a software problem !!! the higest uptime we have is about 30 days - eve...

odie

did you try other interfaces ?

odie

had the same problem with queues - but had them deactivated before upgrading - same happend - after upgrade from 5.21 to RC4 (RB1100AHx2)there have been 2 targed addresses at each queue - the second one that was added at the update is 0.0.0.0/0 - not a big problem on my testbox not so good in real ....

odie

are both chains turned on ?
seems that one of them is off
wireless interface/HT

odie

+1 more

odie

we built our own management system based on microsoft Dynamics NAV (former Navision) and MS SQL Based (www.evolynx.com)radiusserver togehter with a microsoft partner who is customising navision installations - well this was a bit more then customising ,-)
http://www.dynavics.com/

odie

when you cahnge the input voltage of the board fan speed also changes
just found out today...
when running on 12V - internal power speed is about 3500 rpm, at the moment you plug in a pppoe supply with about 23V then fan speed gets upt to 7000 rpm...
bug or feature ?

odie

you cant mix tagged and untagged vlans on one physical lan port - on all mikrotiks !!
i have thrown out all my 750 UP boards 2 days ago because they are unstable and not the remote powerd UBNT devices
i am looking forward to a solution with the power problem

odie

i have a new problem since 2 days now we have 4x 750UP each powering 2 or 3 devices (ubnt rockets) on a tower that configuration has been running now for about 2 month without a problem - since 2 days now the rb750UP hang up - all of them a t the same moment !! we are still testing and only 3 custom...

odie

snmp problems are getting worse the more clients you monitor - seems to be an I/O problem ? we are running the dude server on a intel dual 4 core server with 32gb ram on w2k8r2 getting more and mor troubels with alarms beacuse of snmp polling errors a feature to move some items to a new sub-map woul...

odie

any update about the port flapping problem in 5.13 ? having the same problem here between new rb1100AH and 750up downgrade to 5.12 solved problem ... problem seems to be only on ports 6 to 10 (second switch chip) and only if there are not more then 2 or 3 of the 5 ports are used ... if there are at ...

odie

i can't believe that this works 24x7 !!

odie

http://forum.mikrotik.com/viewtopic.php ... ll#p237245

this would be a solution works fine here for years now
have a look at the fuel cell ...

odie

PowerDsine 9001G ?

odie

updated a PtmP link this night (4 Stations) - seems to run fine ;-))
can see a bit more of the signals and rateselection seems to be more stable
we will keep an eye on it...

odie

i have a similar problem with rb1200 - rebooting with 5.8 and imported config and can´'t find reason
but cant add config step by step becaus it is production at a railway company - working 24-7
supout to support allready sent...

odie

around 4000€ including the 2-tank switch - that automatically changes to the other tank when the first one is empty and can be monitored also via serial console like this.. should be cheaper allready - there is a new consumer line from efoy avaliable SFC>sfc battery voltage 28.02V output current 0.0...

odie

you should have a look at the status of the interface - not the settings to see the real connection speed !!!
settings are set to auto negotiation - the speed setting there is for nothing..
as you write that you have a 1 Gbit IF then you might also have gbit connection !!

odie

sure YOU now it better ......
it is only ONE system with a bug ....

odie

how can the wireless connection time be higher then the up time of the board??

uptime.jpg

odie

i have 4.17 runnning on latest vmware esxi 4.1U1 - no problem - use Intel eth - problem is in the config of your virtual machine !

odie

and also update to latest ROS 4.16 !

odie

any news about the RB1200 that was mentioned in the first change-log-release.......
more cpu power then the rb 1000 ?

*) added extended ethernet statistics (/interface ethernet print stats) for RB800,RB1000,RB1100,RB1200 and RB7xx with AR7241 or newer cpu;

odie

how did you update the software - via netinstall, ftp oder winbox ?

odie

we updated one of our solar stations with SFC fuell cell "EFOY Pro 600" 2 weeks ago because we had troubles during winter, and now we hope, and it looks great, that we dont need to climb the hill with one of our small honda generators agin.... we have 2x 120W solarpanel, and now we have on...

odie

i have ros running in esx4 and esxi4 servers and having no problems
one of them is also running the user manager
never checked troughput - as i never had a problem

odie

just upgraded a production link in our network with beta6 und R52Hn cards
built in Huber&Suhner 23 Antennas using only 1 channel about 13 KM
seems to work fine ;-))
getting up to 35 Mbit with conservative settings and low power setting
also latency is very low...
waiting for finals....

odie

did you read the release notes !!
is beta and not fully functional !

odie

no problem staying to the rules !! but if you would like to sell more of your products you should also here to your customers !!!! we have many hundreds of your devices in use ! and we need an affordable client we have this wish since years now - and where is your answer ?? rb 411 ? - which enclosou...

odie

so i have to put all my boards into the oven to test ??
this cant be a soluiton ....

odie

and how to find out if i have one of the problematic boards on stock ??

odie

i think i have the same problem here with a usb huawei E169 as long it is connected to 1 cell it works
on changeing between cells it seems to hung up
only powercycle helps - watchdog doesnb not !
first i thougt the powersupply on the usb port is not strong enough but now i am not so sure anymore...

odie

disable all firewall on the computer running netinstall during installing
disable all other dhcp or bootp servers in your network!
http://wiki.mikrotik.com/wiki/Netinstall

and reading documentation before acting could help.....

odie

but works only until ip from client is renewed...
first time the dynamic policies have not been deleted
after SA flush the connecetion got up again
after next iprenew the dynamic policies have been deleted and a new SA has been stared
but no policies haven been built....
very strange all that...

odie

default policy adapted
and it works....

thanks a lot!

odie

and which proposal is used for that dynamic policy ?

odie

hello did anybody try to setup an IPSEC tunnel connection to a client router with dynymic ip address ? in this case it is a AVM Fritzbox, but i also cant find a way how to do it with a mikrotik box. the client (fritz box) has a dyndns name, and when i enter the actual ip into my mikrotik config the ...

odie

why dont you use routerboards ?
or just test your mainboards before putting them into production ??
mt cant test all mainboards on the market if their os runs on them
and simply dont use a ros version that makes problem with your hardware

odie

my lancom accesspoint is still running....
Uptime: 4Y 3M 4D 17:33:58
all mikrotiks got softwareupdates ;-((

odie

you could spend your time waiting for experts suggestion on reading the wiki or a manual.....

odie

i found i mt box in our network with a nice uptime....

odie

hello everybody.... i found an old forgotten lancom ptp link in our network with a nice uptime on one end more then 4 years.... this box has not found its way into our dude so never got an update and never went down..... and has never been changed to an mt box........... ( LANCOM L-54ag Wireless 5.0...

odie

here is what you need !
http://www.harkis.harting.com/harkisng/de/09120009957
rj45 plug for cable AWG 22...24

odie

if you dont show us your config nobody can help -
and its for sure no rb532 problem

odie

mikrotik guys cannot test all possible configurations
my testboxes are running without any error !!!!

odie

why do all of you just install new software without testing it with your configuration somwhere near you?????
and then blame someboby else for that....
i dont think that there is any urgent need to update a router as far as 600km away with a brand new untested release ...

odie

copy the files you can download onto your router via winbox ond then do an "Import" of that file on the local console this keeps the syntax. we have seen problems when you just copy and paste the script into the script editor. and dont forget to set the sceduler to start the ups script eve...

odie

we use aradial with ms-sql backend and have a self built implementation into microsoft NAV ( Navison)
with fully atomated billing (volume and bandwith based internetconnects including automated billing of overtraffic) and complete voip billing from an ansterisk log file ....

odie

Soaring_Volt.jpg

here we go

odie

but you could run the dude on one of your routerboards ?
so you dont need to have an extra box running ?
dont you have some monitoring running somewhere ?

odie

why not using the dude und poll the voltage via snmp ??
works great
this is th oid you have to look at and multiply it with 0.1
iso.org.dod.internet.private.enterprises.mikrotik.mikrotikExperimentalModule.mtXRouterOs.mtxrHealth.8.0

odie

have a look at http://www.wut.de they have really good digital I/O stuff

odie

thanks a lot !!!

odie

you only can use about 80% of the daylight - as long as your panels are fixed
the pax power of a solar panel is alwas given with 25°C panel temteratur - when they get hotter the
output goes down
only about 65 to 70% of the energy is loaded int the battery ...

odie

you will need at least twice the panel power - better would be 24V 120W

odie

you will find the scripts on the follwing links
http://wiki.mikrotik.com/wiki/UPS_scripts
or http://www.stone-rich.at/dl/str-ups/default.htm

odie

have a look at this:
http://www.stone-rich.at/dl/str-ups/default.htm
and here you can get it
http://www.evonet.at/mikrotik/catalog/i ... p?cPath=27

odie

speed.jpg

very cool speed with 3.15 - even more then the eths are built for on the rb532 ;-))
this showed at least as log as it took me to see it and make a screenshot ...
it has slowed down again ;-(

odie

only downgrade firmware not OS - you can find it on routerboard.com

odie

but also when i use 20mhz mode 5 mhz channels ar taken !!
if so - you loose connection !

odie

the problem is that with radar dedection there are also channesl choosen that the clients can't connect because they cant change thair channels in 5mhz steps !!!!!

odie

99,8% here and no seeds also ;-(

odie

i think there was not ros 2.8x for rb500 !!

odie

not the download file is the problem - the antivirus software !!
having no probems here .....

odie

we are running 2.9.50 and 3.x witn nearly no problem ...
only had to reboot x86 with 2.9.50 as id did not want to change routes when ospf said..
now its running ok since 2 weeks and has benn running before for about 5 month
problmes where only when i had been playing around too much....
but no OSPF V3

odie

i dont know what you are missing.....
if no input ther will be no output...
did you have a look into the manual ?

odie

we have changed back to 2.9.51 on all off the 1xx boards we are running. it seems that they cannot handle the load and are allways close to 100% load and then reboot. but on all other boards 3.x is running ok .... we had slight troubels with some rb 532 upgraded from 2.9.s versions - but after reset...

odie

same problems here.... the only stable version on our rb 1xx is 2.9.xx none of the 3.x are running as we would like or they should do.... i think the boards have not enough cpu power as they allways go up to 100% load on doing nearly nothing, only 1 rb52 with 1 or 2 clients and no noise imunity acti...

odie

are the cards sharing the same interupt ?

odie

user stronger CPU !!

odie

we had a simmilar problem with a rb532r5 here - the board was running fine on 3.4 until ip upgraded it to 3.10 it startetd to reboot every 10 to 20 minutes - we did a downgrade - same problem still.... as the log showed that the board was rebootet by the watchdog i turned the watchdog of nice result...

odie

why dont you use a mikrotik system as dude server - that is much easier and does not make any troubels....
vista does has many voodoo things for using it reliabe monitoring system...
also the mt licence is cheaper then a vista home version .....

odie

use a good switch (hp, cisco, AT)between notebook and routerboard
helped here

odie

hi we also have rb532 and rb 230 running on ros 3.x that reboot once in a while, they never did with ros2.x !! sometimes the while is shorter somtimes longer... but normaly there is no entry in the logs or any supout file.... some other boards run without problmes - so i think that is just a softwar...

odie

hello everybody the modules should be availiable in the onlineshop at http://shop.evonet.at in the next days a wireing paln will be on the website, in a few days also and some updated scripts the powersupplies (AD-55 aor AD 155A) which suit to our module can be found at http://www1.schukat.com/schuk...

odie

we built a battery monitoring module an scripts for it
and in addition with powersupply you have your low cost ups talking to mikrotik...
http://www.stone-rich.at/dl/str-ups/default.htm
regards

odie

it is running with E220 !!!!!
after a clean system reset and new config in rc14 on a rb230 it is running
absolutly the same config on it !!!

odie

this is the modem log from my xp workstation dialing in with the same usb modem ... there you can see the connect after the dial in Senden: ATDT*###<cr> never shows the real number it dials *99# sorry for german - dont have any englisch wks here 01-11-2008 10:47:34.312 - Abschnitt in Modeminformatio...

odie

here it is add add-default-route=yes allow=pap,chap comment="" dial-command="atd" \ dial-on-demand=no disabled=no max-mru=1500 max-mtu=1000 \ modem-init="at+cgdcont=1,\"IP\",\"steinmann.A1.net\"" mrru=disabled \ name="UMTS-01" null-modem=no...

odie

sure i did !!
but doing all this on my notebook by hand in hyperterinal it works - after dialing and sendig the atd*99# there comes a connect answer
not with Ros
also tried with 2.9.50 - same problem

odie

hi i also tried it with rc14 but do not get a connect. thats all i get - then it starts again trying to dial in ....... echo: async,debug umts: sent ATH echo: async,debug umts: rcvd OK echo: async,ppp,info UMTS-01: initializing modem... echo: async,debug umts: sent at+cgdcont=1,"IP","...

odie

did anyone get the Huawai USB E220 running ?
my rb230 does not see it anymore
with RC7 it was shown unter resources/USB
now its gone....

odie

i think a found a bug in rc6.... after installing the dude package on a rb 333 there was no webserver answering anymore and no services where shown in Ip Service list after disabling the dudepakage the webserver was running again ... an one more - activating the ntp client gives mit this error: &quo...

odie

the module is tiny - a bit larger then a wireless module - should fit with a short serial cable and when you put only the 2 pairs of the network cable with data into the rj45 plug an the other 2 pairs (blue=+/brown=-) into a plug for the powerjack you have won ... or just use a rj45 double connector...

odie

hi you cant monitor the voltage directly but you can messure the input voltage - if you split it from poe and just plug it in into the power jack should work with our module that you can plug into the serial port a new version oft the voltage/temp control script will be postet on wiki in e few days ...

odie

hi

should be run every minute or fewer - as you like it ...
i ll work on an englih version soon..

odie

here is what you are looking for..

/ ip firewall nat
add chain=srcnat dst-address=radius-server-IP protocol=udp dst-port=1812-1813 \
action=src-nat to-addresses=source-ip-addrress to-ports=1812-1813 comment="" \
disabled=no

odie

we use powersupplies that have a batt charger/ups function and also have a low voltage cut off http://www.meanwell.com/search/AD-55/default.htm and for this we bult a small box that monitors batt voltage, line voltage and temperatur it also regualtes a fan up to 12V/20W of power this thing talks to ...

odie

or putty - runs fine on my n95 ;-))

odie

here it is - it also works with apc smart ups ..... :set sysname [/system identity get name] :set datetime ([/system clock get date] . " " . [/system clock get time]) # Erster Lauf und Flags noch uninitialisiert? :if (("-" . $flagonbatt)="-") do {:global flagonbatt 0} :...

odie

a good solar charge controller should have a undervoltage cut of we built a smal thing that can monitor the line voltage/ batt voltage and temp in connection with a small powersupply that has a charger for a battery included we use these as powersupplies with monitoring for our stations it also work...

odie

or use V3 beta - there you can bridge wireless-ethernet

odie

use routerboard 14 -> pci to 4 mini pci - so you dont need 5 pci slots !!

odie

we also built a small box that is monitoring input voltage and batt voltage und speaks with the mikrotik-ups-monitor
it also monitors the temperatur and turns a fan on an d off and sends email in case of overtemperature

odie

i did not find anything about it ;-((
but wrote a script that works setting up/down a second ip to get powrfail alarm and also sends emails;-))

odie

ever heared about firewall rules ?

x.x.x.x/x stands for the adresses from where you want to config your router

/ ip firewall filter
add chain=input src-address=x.x.x.x/x action=accept
add chain=input action=drop \
comment="Drop anything else"

odie

if you need affordable spectrum analyzers have a look at http://www.aaronia.de/ we are using it a lot and found many hf problems with it allready like videocams, audiotransponders, and a lot more that have much more power then they are allowed to have... and also a problem with a 3G Basestation that...

odie

you need to specify serial port speed to 2400 and then it should work

odie

ccrum - did you try "nstream dual" on your installation or just e simple link ?

odie

the problem is that there is no possibility to change the contry !
or at least not to find...

odie

that is the problem - not to set ccontry - so we cant use frequencies allowed in austria in G an A band
the card uses USA channel settings
2412 to 2462 only - not higher can be used
and 5500 to 5700 also cannot be used...

odie

and can you change countr settings ?

odie

odie

and why dont you just say what has been changed and leave the decision to me what to do with the boards ?

odie

and would it be possible to just describe the fix or changes ?

odie

but we have the same problems with the 153 boards none of the 10 we bought run stable with 3 cards and "high" load the higher the load the more often the boards reboot with only 3 clients connted the uptime climbed to max 10 days with >20 clients connected on only 1 wlan card (a second car...

odie

i think you miss a real ntp server - i think w2k3 server only answers to his domainmembers...

odie

did you change the mtu from the ethernet port or from the pppoe client interface ?
did you try a transparent proxy as workaround ?

odie

whats the problem with telnet or ssh - this is quick, works on all plattforms including pda and symbian, is fully implemented and also in colours in ROS-V3 - that should be enough colours for wintendo admins

)

odie

we use LV-675 mainboard with Pentium and 2 Mini PCI and one Std PCI slot, and in the 44 pin IDE we plug the IDE Flash disk
as powersupply we use 6-to 26V "PicoPSU" power supply
this is running fine for weeks now...

odie

the board is running without it also ....

odie

there is nothing to repair - is just a counter overflow ...

odie

why dont you use mini itx boards like the Commell LV-675D-R it has 2 Mini PCI Slots and also one std PCI Slot 1GB eth Interface and also one 44pin IDE slot - we use a PICOPSU-60 ATX powersupply that has an input voltage vom 6 to 26V and a max of 60W and is not much bigger then the atx power connecto...

odie

we did some locations with solar power only is a bit of calculating - how long do you want the hardware to run on bad weather - what is the wattage of the hardware ? do you want to to add more hardware in future ? in addition with a wind generator and in a windy location you can save money for battr...

odie

19 betas and 10 RCs i think - as my file archive shows...

odie

i think this is not a matter of the manual but of basic ospf understandings you can find some info here: http://www.inetdaemon.com/tutorials/internet/ip/routing/ospf/index.shtml or even more info under: http://www.cisco.com/univercd/cc/td/doc/cisintwk/ito_doc/ospf.htm and http://www.cisco.com/univer...

odie

here are the details....
http://www.funk-internet.at/bilder/statistik.jpg
is for the whole uptime of >210 days
the link is set to 6Mbit

odie

how long is the uptime of your wirelees links ?
i just found one wich i think is quite ok ....
http://www.funk-internet.at/bilder/wireless-uptime.jpg

merry christmas to all of you ...[/url]

odie

did anyone test the pppoe server in 2.9.38 with > 250 useres concurrent ?
is the problem with the ghost interfaces solved ?
i dont dare to upgrade....
on my other devices 2.9.38 seems to run without any problems ....

odie

we are running aradial radius an have nearly 100% mikrotik OS
works fine and also support from aradial is good

odie

when?

odie

but only "smart ups" are supported not the old ones wich only had a sort of "sigwatch" output and there is no need to power a routerboard with at least a 700VA ups wich is the smalles APC product supporting serial smart protokol !! tha produces only heat and wastes battery energy...

odie

is this a limitation on rb112 oder on the complete mips paltform ?
or why dont you just support simple ups monitoring
that would at least give 2 signal states "ups on battery" and "low battery"

odie

i have the same problem here on differnet versions of 2.9 - if i set the start time to the actual date then it normaly works until i reboot the box
then no more scedueled script is started - after setting the date back to the actual date it works again ...
so do not reboot the boxes

)

odie

we use aradial also without any problems - a few years ago alepo and aradial seemed to be the same i think....

odie

as your budget is flexible than have a look at http://www.lippert-at.de/index.php?id=95
mini itx with pentium mobile, and single voltage supply, no fans
this is a real good one - we use it as multi PTP Termination on one of our towers and have 7 PTP links connectetd on it with nstream....

odie

here it looks like that only when the box is starting the filters dont work
when the box is up allready an then you add som ip that schoudl be bloked by the filter it works
but wehn i reboot the box all the unwanted ips are announced athe the first ospf sturtup ;-((

odie

http://www.aradial.com works fine here since years

odie

hi no statistic about worn out power supplies - we did not buy to many of those because i did not like them from the beginning - the become to hot !! we had no problems in winter but now when its hot outside they die.... so we orderd our own power supplies at http://www.dehner.net and we had not a s...

odie

no
just have replaced one an hour ago ...

odie

how long are the links ?
we have a few 17 to 23 km links with about 25 to 30db signal to noice and also 30db power at the antennas (huber&suhner 23dbiflat panel)

odie

i would like this too !!!

odie

hi i did not try the 5 and 10 mhz channels but we hat other troubles with those cards used in an accesspoint. somtimes after a reboot or after changing config on those cards no or onle very few clients connect and those who connect have a very unstable connection. after a few on /offs of the interfa...

odie

so its seems to be time for the pppoe relay

)
any chance to make a package ?

odie

same question here for traffic running in pppoe session - any possibility to mangle this traffic on a machine that is not the pppoe concentrator ?
we need to priorise voip traffic on our accesspoints - but the clietns are all connected via pppoe
any idea ?

odie

and maybe a possibility to enter the correct scale and unit for the graph

odie

dude also has a e-mail funktion
somtimes it helps to r-t-f-m

odie

we tried it with dynamic settings, and with new rb532 boards new cards and allways the card in the bottom socket hast the problems....
this happens only to boards from the last delivery we got
never seen this on boards that are running for month now

odie

hello in the last few days i found a strange problem - when saveing changes on wirelless settings then sometimes only a few clients connect - after doing the save again ore interface on/off the clients connect again or not .... sometimes it needs a few gos somtimes the clients are connected and no d...

odie

take a serial cable and have a look at the serial console...

odie

and the wireless cards will thank it and last longer....

odie

tested on both connectors and both with setting a and b
no power out of the u-fl plug
on the rb532 directly it works !

odie

one other strange thing happend with wlm54g on a rb502 board they do not get power out of the u-fl plugs !! we tested this on 3 different rb502 and a few more wlm54g cards as long as you stay close to the accesspoint you cann connect with a client - but there is no power coming out of the antenna pl...

odie

formatting your nand should be possible in the new biso version - that should help

odie

update the intel drivers to the last version or dont hide the ssid on the ap
the intel cards did not connect to Zyxel and Lancom APs when the ssid was hidden also
the driver update helped ....

odie

enable ppp-packet in system packages before

odie

the export of the config on the remote client on my workstation (xp/pro sp2) still crashes the whole client with dr watson, on my notebook same softwareconfig it is no problem...
on the "server" (it is only a w2k pro box) it is no problem also

odie

is it possible to generate 2 fifferent bandwith queues with on pppoe login via radius attributes ?
one of the queues should be for standard internetaccess and the other one just to connect to the voip server with hight priority ?

or has anybody a better idea how to manage this dynamically ?

otto

odie

firefox and ie are working
opera does not !!

odie

it does not work here - getting an erron on trying to login
and the logfile sais " Fatal Error: feild to open DB: unable to open database file
any hints ?

odie

i think gyys - that you have some serious config problems
here those boxes work really fine
maybe try to find the mistakes before criticising somebody else

if these boxes are as bad as you guys do then really nobody in the world would use them.....

think it over !!

odie

good idea !

odie

i still have a problem in exporting the config on a remote client (severals machines und systems)
then the client dies with a dr watson
on the server it is no problem ....

odie

i have seen this today also - i added a script to send config export and backupfile via e-mail every night from a few of my routers thos things came twice !! i´ll give it a look tomorrow gain - and chek it with the os versions as they are different from box to box today they are allready deleted ;-((

odie

the problem is that the client does not really bridge everything - so only one pppoe session is working, we had those problems allready it might work when using standard ip entries, but not with pppoe packets. i think that the tiny arp-proxys in those devices are not able to handle anythig else then...

odie

it was worth changeing the routers - no problems any more ....
and we only use zyxel now - just a few linksys are left - they are working also after some firmwareupdates.....

odie

we have throwen out all the d-link routers at our clients and changed to zyxel and have no problems any more with pppoe - is is really running smooth we changed to pppoe over 3 years ago and i am sure it was the right way to go - all the config and accounting is done in the radius database via web i...

odie

we use http://www.aradial.com

odie

witch packets did you use for upgrading ?
the all in one npk or the singel packets ?

odie

install 2.9.17 that helps - we had a problem like this - is working now without problems....

odie

and a radius cache separated for negativ and positive requests so that unauthorised wireless clients dont flood tha radius logs !!

odie

and also if rc6 is installed on the server the updates doesn't really work
on only one of 3 machines here in the office the update was done
on the other 2 (xp machines) the update started downloading and also restarted the dude - but then asked again if i would like to update .....

odie

hi

we use radius authentication for our wireless clients.
is there a possibility to make the mikrotik box to cache positive or negative authentications for lets say 30 minutes ?
so that it does not flood the radius with the same request again and again ?

regards
otto

odie

http://www.kiwisyslog.com/
there is also a freeware version ....

odie

enable periodic calibration in the wireless advanced menue

odie

that sounds nice
would like to see somthing like the p2p filters for sip too

odie

what license level do you use ?
what kind of hardware ?

odie

amps can help on ptp links for sure if you also use high gain antennas !!
but on AP / ptmp installations they are useless - only produce problems
we tried it out a few years ago .....

if you use good wireless hardware on both ends (antennas, cabels and cards) then everyting works trouble free !

odie

i just changed back to 2.9.13 because one of my rb532 with 2x 2.4ghz and 1x 5ghz AP has been rebooted twice allready by the watchdog timer !!

never had this before

odie · up to about 300 concurrent connections on 2.9.12 on a P4 without no problems

up to about 300 concurrent connections on 2.9.12 on a P4 without no problems

odie

if you think that you can seal the box 100% then you are wrong !!! the box is breathing - the air expands when it is warmer and and collapses when it gets colder - so if there is no hole then the air comes through maybee the antenna or the powercabel - but it for sure comes in somewhere as averybody...

odie

not the driver is the problem - the via board makes the troubels !!
use mikrotik rb532 or itx boards from http://www.lippert-at.com for exampel they run smooth and have much more power......

odie

i had the same problem and just rebootetd the box again than it upgraded
also happend with 2.9.11 e few days ago

odie

seems to be a "hidden" feature
did not read about this in a manual...
thanks a lot for that hint....

odie

we had loose soldering point on the rb532 once on the doughterboardconnector - just resolderd it and works fine ...

odie

try it with 2.8.28 we had the same problems here after upgrading to 2.9.x on serveral boxes pingtimes even climbed up to >3000ms this problem shows up only as long as clients are trying to connect - as long as they do not transfer any traffic they get disconnectetd after a few seconds - and this goe...

odie

but it would be easier to handel within the winboxloader .....

odie

hello
this is good for our own network ...

but we have lots of customers that use mikrotik boxes that we dont want to monitor with dude - and also like to have some help via remote from us...

odie

would it be possible to a folders and subfolders for the entries in the winboxloader - that would make it easier to find the right machine....

regards
otto

odie

http://www.aradial.com
can handel all this, we use it here also

odie

hi

we have changed to zyxel and dont have problems anymore,
only more then 100 d-link di514 and 604 in our office.......
does anyone wants to have them ?

odie · upgrade to the latest software version 2.9.10 .....

upgrade to the latest software version 2.9.10 .....

Search found 216 matches