Are you sure they still have the same IP address? Address acquisition method "DHCP with fallback" is IMO dangerous, it means primary means of address acquisition is via DHCP and any DHCP change can mean change in management IP address change. Yes. It is just fallback address and it is the...

Are you sure they still have the same IP address? Address acquisition method "DHCP with fallback" is IMO dangerous, it means primary means of address acquisition is via DHCP and any DHCP change can mean change in management IP address change. Primary address acquisition method is DHCP, be...

What is considered as "long cable"?

Is it 15 meters? 50 meters?

I have same problem with three RB260GSP switches. Firmware 2.13 (updated today). They were deployed today with config like attachment. Everything else (not shown on this image) is default. Each is connected to: - 24V 2.5A supply on power jack - edge router RB2011 on Port1 (30-70m cat6 cables) - 3 mi...

But now we have v7 beta so it certainly should be solved there! (all problems will be solved in v7)

And there will be made new problems!

Hi guys, I have RB260 PoE switch. At this moment I have connected: - port 2 to router (RB760), 20cm cable - port 3 to modem 1 (SXT LTE6), - port 4 to modem 2 (SXT LTE6) - port 5 to modem 3 (some Huawei) Power supply is standard (24V, 2,5A). Switch has default config (except password). PoE is set to ...

In my case after few months all of my four SXT LTE 6 modems have/had problems with loosing sim card. I took them from the roofs to lower location to make replacements easier. Now I have also other problem - only one that was working properly until winter has now problem with booting (or power?). May...

Hi guys, My client has 3 buildings with apartments for rent. The buildings are located far from wired internet providers. LTE signal is not perfect (in good weather we can reach 30MBps downlink and about 5-8MBps uplink from single LTE connection). LTE routers connect to 3 diffrent operators. So far ...