Community discussions

MikroTik App

Search found 31 matches

by glow
Sun Jul 17, 2022 5:07 pm
Forum: Containers
Topic: Container Support to MIPS Architeture
Replies: 24
Views: 11544

Re: Container Support to MIPS Architeture

[...] Had you access to some information about mikrotik no using MIPS never more? Quite the opposite: both of the big 100G devices MikroTik has recently introduced are MIPS-based. They're classed as switches (CRS) rather than routers, though, so CPU performance never was their major focus. I think ...
by glow
Mon May 30, 2022 10:09 pm
Forum: General
Topic: All Hex ports full routing capability?
Replies: 7
Views: 621

Re: All Hex ports full routing capability?

I would still use the device's block diagram. Many do have just two routing interfaces plus an internal switch. Sometimes the internal switch is more capable, and you can have soft routing (where every routing decision is handled by the CPU).
by glow
Sat May 28, 2022 8:23 pm
Forum: RouterBOARD hardware
Topic: CRS3xx-series -IN/desktop model?
Replies: 3
Views: 2503

Re: CRS3xx-series -IN/desktop model?

Yeah, no real POE options in that density, even though they do make the boards for it (netpower16 is a CRS3xx with 16 RJ45 POE PD). Strange part about the non-rack variant of the CRS326, it seems to be lacking any ability to put rackmount ears onto it. I'm not looking to mount it in a rack, but it a...
by glow
Sun May 08, 2022 6:35 pm
Forum: RouterBOARD hardware
Topic: Unboxing and more - MikroTik CCR2116 & CCR2216
Replies: 4
Views: 1673

Re: Unboxing and more - MikroTik CCR2116 & CCR2216

Never understood tech channels on youtube with English title, English description and alien language. There was a while when YT would automatically translate some of that (especially titles) to english. I don't know if they stopped doing that. I also don't know if that is the case with this channel.
by glow
Fri Apr 22, 2022 1:43 am
Forum: General
Topic: Bonding useless on Mikrotik CCR2004-1G-12S+2XS?
Replies: 6
Views: 1452

Re: Bonding useless on Mikrotik CCR2004-1G-12S+2XS?

This CCR2004 has no hardware-switch chip, so all L2-Features have to be CPU-emulated. It seems this is the best the CPUs can do. In the test-results (https://mikrotik.com/product/ccr2004_1g_12s_2xs#fndtn-testresults), 25 Firewall-Filter-Rules will also decrease the througput to ~4,5GBit. But as of ...
by glow
Sun Apr 10, 2022 12:32 am
Forum: Beginner Basics
Topic: Unable to get routing on multi VRF setup working, routes marked as inactive [SOLVED]
Replies: 17
Views: 4619

Re: Unable to get routing on multi VRF setup working, routes marked as inactive [SOLVED]

Ok, I did some more testing and that is exactly the issue. If you enable hardware offloading, it breaks VRF completely. I was able to reproduce this behavior disabling and enabling the feature. If enabled, all VRFs will utilize the last configured routes you have in your routing tables. If disabled...
by glow
Sat Apr 09, 2022 6:20 pm
Forum: RouterBOARD hardware
Topic: CRS504-4XQ-IN - Nice, now more ports please.
Replies: 10
Views: 2206

Re: CRS504-4XQ-IN - Nice, now more ports please.

8-16 port switch - that would put Mikrotik right in the nose of extremely high end switches i love MikroTik but we have to look at the big picture, i think we are very far from high end, in high end we are seing about 32 x 100g in 1 rack unit in a standalone switch, in modular chassis there are 32 ...
by glow
Fri Apr 08, 2022 5:37 pm
Forum: General
Topic: L3 HW Offload support on RB5009 [SOLVED]
Replies: 20
Views: 9178

Re: L3 HW Offload support on RB5009 [SOLVED]

Azzurro I would say your chances of seeing L3HW support on RB5009 and CCR2004-16G-2S+ are very high, say 85% Mikrotik wouldn't spend a dime on hardware they were not going to use ;). Hell they even removed the damn beeper from new products to save a few cents ! (I will forever grieve said beeper) I...
by glow
Fri Apr 01, 2022 3:37 am
Forum: Wireless Networking
Topic: Why can't winbox see Audience device? [SOLVED]
Replies: 36
Views: 5065

Re: Why can't winbox see Audience device? [SOLVED]

I know on my cap ac, using it as a pure Access Point was a bit frustrating at first, since the device tries to operate in a "router" mode, and the quick webfigs didn't make things any better. The default settings (or whatever I clicked around with in webfig/quickWebfig) almost always made ...
by glow
Fri Apr 01, 2022 3:07 am
Forum: Wireless Networking
Topic: Why can't winbox see Audience device? [SOLVED]
Replies: 36
Views: 5065

Re: Why can't winbox see Audience device? [SOLVED]

Are you able to connect to Winbox via devices that are directly connected to Audience via WiFi or downlink ports (meaning, by not traversing the uplink to the CCR/CRS/etc)?
by glow
Sat Mar 26, 2022 1:17 pm
Forum: SwOS
Topic: CSS326-24G Firmware 2.13 update broke SFP Module
Replies: 5
Views: 7328

Re: CSS326-24G Firmware 2.13 update broke SFP Module

I have no real solution nor suggestions. Do they work in the CRS305 with RouterOS booted?
by glow
Thu Mar 24, 2022 10:47 pm
Forum: General
Topic: DHCP tftp option for Grandstream provisioning [SOLVED]
Replies: 14
Views: 4609

Re: DHCP tftp option for Grandstream provisioning [SOLVED]

I don't have anything helpful to give.
When you wireshark sniff a windows/edgerouter setup, does it actually transmit the https://host:port in the clear or does it translate it into an IP address?
by glow
Thu Mar 17, 2022 10:51 pm
Forum: RouterBOARD hardware
Topic: CRS109-8G-1S-2HnD-IN and D-Link DGS-1100-08P: 802.3af PoE doesn't work
Replies: 4
Views: 4652

Re: CRS109-8G-1S-2HnD-IN and D-Link DGS-1100-08P: 802.3af PoE doesn't work

Does the D-Link support passive POE out? If it does, then it should be able to power the switch.
by glow
Sat Feb 05, 2022 4:47 pm
Forum: RouterBOARD hardware
Topic: CRS312 link speed COMBO ports RJ45 [SOLVED]
Replies: 9
Views: 3498

Re: CRS312 link speed COMBO ports RJ45 [SOLVED]

... it might be hard to get anything , except IOT devices, with a 10MBit port. Probably nothing uses 10Mbps these days now, the story about 100Mbps is different. My observation is that all devices capable of wake-on-lan put their ethernet ports to 100Mbps mode, the reason is very likely power consu...
by glow
Fri Feb 04, 2022 2:12 am
Forum: Beginner Basics
Topic: CCR2004-1G-12S+2XS slow NAT performance [Fixed]
Replies: 39
Views: 11068

Re: CCR2004-1G-12S+2XS slow NAT performance [Fixed]

I am going to stop investigating as I don't have enough tools to test bandwidth. * My ISP fiber line is offering 2.5Gbit downstream, which is far from 10Gbit. * I am using 2 x 5Gbit USB3 dongles. Testing from one dongle to another shows 3.5 Gbit speed, not 5Gib. * One computer with 10Gb network car...
by glow
Sat Jan 29, 2022 4:04 am
Forum: RouterBOARD hardware
Topic: Which RouterBoards/routers have USB3-compatible mPCIe slots? (If any)
Replies: 6
Views: 3025

Re: Which RouterBoards/routers have USB3-compatible mPCIe slots? (If any)

AFAIK, no official mPCIe spec includes USB 3.0. For USB 3.0 speeds (now called USB 3.2 gen 1, 5Gbps), it's electrically similar to PCIe 2.0 in some aspects, so I suspect most would have just used PCIe unless there were good reasons not to.
by glow
Wed Jan 12, 2022 3:58 pm
Forum: Announcements
Topic: v7.1.1 is released!
Replies: 443
Views: 227791

Re: v7.1.1 is released!

Is that the queue or all 64 enumerable SR-IOV ports?
by glow
Tue Jan 11, 2022 7:06 am
Forum: Wireless Networking
Topic: Low throughput with 3x Audience
Replies: 37
Views: 8467

Re: Low throughput with 3x Audience

Sounds good gotsprings, what rekeying (assuming wpa2) numbers seem to be optimal??? It was 2 clients on my network. They started to act up when that Ruckus Update came along over a year ago. With Mikrotik I would see hourly disconnects. On a WAG (Wild Ass Guess) I changed the time to 10 minutes. Th...
by glow
Sun Jan 09, 2022 7:09 pm
Forum: RouterBOARD hardware
Topic: I really need POE for this CRS312-4C+8XG-RM
Replies: 12
Views: 6097

Re: I really need POE for this CRS312-4C+8XG-RM

Netgear also sells its slightly cheaper predecessor, the MS510TX P P. Main difference is slower ports and a reduction of PoE power from 60W per port to 30W per port. UP is PoE++60 with 4x2.5, 4x10GbE, & 2xSFP+. PP is PoE+ with 4x1GbE, 2x2.5GbE, 2x5GbE, 1x10GbE, 1xSFP+. Otherwise, both end up be...
by glow
Wed Jan 05, 2022 3:07 pm
Forum: RouterBOARD hardware
Topic: Number of CPU cores on CRS3xx
Replies: 13
Views: 5759

Re: Number of CPU cores on CRS3xx

That would be somewhat strange ... Why do you find it strange? Back when linux kernel 3.3 was condidered modern, it was still sensible to build a kernel with minimum supported feature set ... e.g. support for single CPU (core), support for 4GB RAM (take away address space for hardware and one ends ...
by glow
Tue Jan 04, 2022 10:29 pm
Forum: RouterBOARD hardware
Topic: Number of CPU cores on CRS3xx
Replies: 13
Views: 5759

Re: Number of CPU cores on CRS3xx

They are dual core. RoS 6 could only see one of them, so they were sold as single core - but RoS 7 can see (and use) both of them.
That would be somewhat strange, though I wonder if other 3236 devices are affected - CRS305 and various CRS328 devices?
by glow
Mon Jan 03, 2022 5:59 am
Forum: RouterBOARD hardware
Topic: I really need POE for this CRS312-4C+8XG-RM
Replies: 12
Views: 6097

Re: I really need POE for this CRS312-4C+8XG-RM

Another tech recommended Netgear. https://www.netgear.com/support/product/MS510TXUP.aspx Netgear also sells its slightly cheaper predecessor, the MS510TX P P. Main difference is slower ports and a reduction of PoE power from 60W per port to 30W per port. UP is PoE++60 with 4x2.5, 4x10GbE, & 2xS...
by glow
Fri Dec 31, 2021 11:29 pm
Forum: General
Topic: You've got to be kidding me. [SOLVED]
Replies: 18
Views: 3526

Re: You've got to be kidding me. [SOLVED]

Capac6E :-))))))
With that name, maybe they can one-up Ubi and only have ax on the 6GHz band, leaving 2.4GHz on n and 5GHz on a subset of ac wave 2 features (first two Unifi 6 products had ax only on 5GHz, with a much older radio for 2.4GHz). :)

Either way, we hope for a better future.
by glow
Fri Dec 31, 2021 5:18 am
Forum: RouterOS beta
Topic: After enabling hardware offloading, console and mgmt stops responding [SOLVED]
Replies: 8
Views: 10159

Re: After enabling hardware offloading, console and mgmt stops responding [SOLVED]

Please let everyone know if 7.1.1 does resolve this. I don't have nearly as many VLANs, but I'd still like to know!
by glow
Tue Dec 28, 2021 3:26 am
Forum: General
Topic: What to do when WebFig's left menu is missing ?
Replies: 16
Views: 4522

Re: What to do when WebFig's left menu is missing ?

Would resetting a device do the same thing as a fresh install? It did not resolve the issue on my Hex S, though I'm willing to try again (and with more depth, since the first time I reset it, it somehow kept my prior configuration).
by glow
Tue Dec 28, 2021 1:36 am
Forum: General
Topic: What to do when WebFig's left menu is missing ?
Replies: 16
Views: 4522

Re: What to do when WebFig's left menu is missing ?

I keep on running into this problem. I initially saw it after upgrading my CRS309 to 7.1. It is consistently occurring on my CRS309, Hex S, and cAP AC (all 7.1.1 now). I never ran into this issue in the past, so I'm curious as to why it's happening now. Reading @tangent's post, I can confirm my init...
by glow
Fri Dec 17, 2021 8:37 pm
Forum: General
Topic: What to do when WebFig's left menu is missing ?
Replies: 16
Views: 4522

Re: What to do when WebFig's left menu is missing ?

I ran into this after upgrading to 7.1. I just force refreshed (ctrl+f5 in most browsers), which clears the cache and reloads everything. Seems to have resolved it so far, for me.
by glow
Sat Dec 11, 2021 3:23 pm
Forum: Announcements
Topic: v7.1 is released!
Replies: 785
Views: 230853

Re: v7.1 is released!

I had an odd issue across Firefox and Edge (Chromium) when upgrading to 7.1 stable via the upgrade channel. WebFig didn't quite work properly, and clicking on webfig would revert the selected button to Quickset, and it would bring up the Interface menu across the entire screen. However, the side pan...
by glow
Sat Dec 11, 2021 12:36 am
Forum: General
Topic: ethernet router with 24 port
Replies: 7
Views: 1077

Re: ethernet router with 24 port

Also depends on what you want to do with it. Are you talking about linerate routing across all 24 ports? Or a router that only has to NAT/Firewall/DNS for a single 1Gbps uplink, and everything else is just switched behind the NAT? CRS3xx could do the latter (moreso in V7, if setup properly). Linerat...
by glow
Wed Dec 08, 2021 3:07 pm
Forum: General
Topic: Truely fanless 10Gb switch with routerOS + hardware accceleration [Fixed]
Replies: 32
Views: 9517

Re: Truely fanless 10Gb switch with routerOS + hardware accceleration [Fixed]

+IN replaces the old +PC label, but I thought the CRS326 +IN lacked rackmount ears?
by glow
Sun Dec 05, 2021 2:01 am
Forum: General
Topic: Truely fanless 10Gb switch with routerOS + hardware accceleration [Fixed]
Replies: 32
Views: 9517

Re: Truely fanless 10Gb switch with routerOS + hardware accceleration [Fixed]

In that case, my fanless setup is: CRS309 (8 x SFP+, 1 x GbE RJ45) CSS610 (2 x SFP+, 8 x GbE RJ45) Connected via a single SFP+ <--> SFP+ connection. One could use a SFP+ DAC instead. If more fanless RJ45 ports are wanted, the CSS610 can be replaced with either the C S S326-2S+ or either C R S326-2S+...