Your Bridge definition is non-standard REMOVE PVID14 for now. Its not the place to use vlanID normally. You dont identify the bridge as the managment vlan either,,,,,,, its a bridge!!! You have 6 vlans and 7 Pools, dont tell me you are using the bridge to also do dhcp etc. ??? If so, keep it simple...

VLAN 60 is the one i'm trying to get out of port 4(in the bridge).

post your router config. /export hide-sensitive file=anynameyouwish # model = RB5009UG+S+ # serial number = /interface bridge add admin-mac=(mac address) auto-mac=no comment="Management VLAN" \ ingress-filtering=no name=bridgeLAN pvid=14 vlan-filtering=yes /interface vlan add interface=sf...

Follow the link to ITEM C here - viewtopic.php?t=182373. It is the best vlan setup with examples document.

Thanks, it has to be something I'm missing as I removed the port from the bridge and still not gave an IP address. I will continue to research.

If you need to use only one port on RB, and you're sure that you won't need more in future (e.g. you won't need to extend same VLANs to another switch in second RB's port), then just remove that port from any existing bridge, add four VLAN interfaces to it, and that's it (aside from IP settings and...

I'm interested in this answer because I have the same issue as you. Also, just in case you know, I have the same topology as you with the exception that I want port #4 (in the router) to be a separate VLAN for my VOIP. My issue is that I have tried many settings, but I can't get port 4 to issue an I...

Thanks,

I verified that 0.0.0.0/24 can do the trick, but it will consume resources that can be used somewhere else.


V/r


Toni

Good evening, I have a small question and I apologize in advance if this is something already asked. i just got my first MikroTik router (I'm all excited about it). This is my question, I want to use mangle to create an address list, I have about 7 VLANS and I want all traffic no matter which VLAN i...