You need to add routing information:
https://wiki.mikrotik.com/wiki/Manual:S ... ic_Routing
Torch?Yes, but with only one window, I already see 200 kbps...
frequency: 58320
mcs: 8
phy-rate: 2.3Gbps
signal: 50
rssi: -68
tx-sector: 28
tx-sector-info: center
rx-sector: 96
distance: 124.56m
/ip firewall filter
add chain=input in-interface=ether1-WAN protocol=udp dst-port=53 action=drop
add chain=input in-interface=ether1-WAN protocol=tcp dst-port=53 action=drop
pcq-classifier=dst-address or src-address
/interface bridge settings set use-ip-firewall=yes
/queue export
/interface bridge add
/interface bridge port add bridge=bridge1 interface=ether1
/interface bridge port add bridge=bridge1 interface=wlan1
Specify all wireless subnet not a single ip like 192.168.1.0/24Think it should work right? remember, no IP specified in the queue rule.
/ip firewall nat print
/ip firewall filter print
/ip firewall nat print
/ip firewall filter print
/ip firewall filter add action=drop chain=input src-mac-address=AA:AA:AA:AA:AA:AA
I noticed that rb 153 works better with 2.9.xrouterboard 153, current-firmware: 2.12, RouterOS: 3.6
add chain=srcnat action=src-nat src-address=172.16.100.0/24 dst-address=172.16.100.202 protocol=tcp to-addresses=gateway.ip to-ports=0-65535
Check your board settings: http://forum.mikrotik.com/ucp.php?i=prefs&mode=post "BBCode" should be enabled, or just uncheck "disable bbcode" before submiting.Edit: Why my quoting isn't working?
nslookup www.google.com
Name: www.l.google.com
Addresses: 209.85.135.99, 209.85.135.103, 209.85.135.104, 209.85.135.147
Aliases: www.google.com
But anyway you should use masquarade on MT2, becouse adsl router can deal only with 192.168.123.0/24 subnet.PC1: 192.168.10.254 GW: 192.168.10.1
MT1
ether1: 192.168.10.254
nslookup www.uwm.edu
Name: batch1.csd.uwm.edu
Addresses: 129.89.169.224, 129.89.7.9, 129.89.70.230
Aliases: www.uwm.edu
http://www.google.lv/translateHow about the chinese ?
/ip firewall filter add chain=forward p2p=bit-torrent action=drop
/interface bridge add name=bridge
/interface bridge port add ether1 bridge=bridge
/interface bridge port add ether2 bridge=bridge
interface ethernet set interfacename mac-address=XX:XX:XX:XX:XX:XX
ip firewall filter add chain=forward src-address=bad.user.ip action=drop
ip firewall filter add chain=forward src-address=bad.user.ip action=drop
chain=srcnat action=masquerade
chain=srcnat out-interface=ADSL action=masquerade
add chain=forward in-interface=NIC3 dst-port=21 action=accept
add chain=forward in-interface=NIC3 dst-port=80 action=accept
add chain=forward in-interface=NIC3 dst-port=110 action=accept
add chain=forward in-interface=NIC3 action=drop
chain=forward in-interface=Local protocol=tcp dst-port=1024-65535 connection-limit=20,32 action=drop
Correct url should bet without dot :) -> http://www.mikrotik.com/docs/ros/2.9/guide/basicThere is nothing there at the link you gave. What is it supposed to be.Once more: http://www.mikrotik.com/docs/ros/2.9/guide/basic.
chain=srcnat action=masquerade
chain=srcnat out-interface=Public action=masquerade
/ip firewall filter add chain=input src-address=!10.0.0.0/24 protocol=udp dst-port=53 action=drop
/ ip firewall dst-nat
add dst-address=80.55.159.106/32:80 protocol=tcp action=nat to-dst-address=192.168.1.200 to-dst-port=80 disabled=no
/ ip firewall src-nat
add action=masquerade disabled=no
add dst-address=192.168.1.200/32:80 protocol=tcp action=nat to-src-address=192.168.1.2 disabled=no
add action=reject protocol=tcp src-address=10.0.0.188/32 connection-limit=50