The problem with twisted pair is the shunt fed AM still radiates 5kw. I'll have to pull out a meter and test. But basically the radio has to be separate from the antenna. This used to have a STL at 749mhz accepting an audio feed. So i'm certain the cabling is sound. But you're right I'm not sure on ...

Team, I need some advice. I have an AM tower that has an STL antenna already on it in the 700mhz range. I want to remove that, and install a Mikrotik 5ghz system. There is already a thick cable going up the tower. The tower itself is shunt fed, and the thick cable is shielded and grounded every 10 f...

Oddly enough I got this working using the mikrotik app for android and basic port forwards. I would like to see an add in pack for Router OS running softether. It's pretty amazing just how powerful this package is. I also was going to try zero tier but for the life of me can't find it for the CCR100...

<t>Also the tile as in CCR1009. I've been running SoftEther on a Cisco/Linksys connected to my CCR1009 which works beautifully, but I'd rather replace that link with ZeroTier directly off the CCR1009. Its a beautiful router that I resurected from a trash pile after the processor developed cpu broken...

Hi,

Any chance we could get Zero Tier Compiled for the CCR1009? I see it's on the ARM routers but not tile?

Thank you,
Chris

Sorry, i'm using the SFP port with an ethernet port. Both are running at 1gig. The SFP+ port is still free. I may upgrade to a new switch to utilize the SFP plus. Basically aggregating the links was done to create more bandwidth to the switch itself. I'm not sure if I can offload NAT to the switch. ...

So here's what i've got and I'm looking for advice. I've got a CCR1009 currently running with a bridged link into the Cisco 7350G. The 3750G only had SFP ports and copper so I created from Port 2 and SFP a LACP bridge to the cisco. This works great sort of. What I'm thinking I can do is the switch c...

Hi, So I'm new to Mikrotik but not our realm. Long story short I've ran into a bit of an issue with a CCR1009. I run a network with SoftEther Nodes in it. I have a customer who can use any kind of DDWRT router, or Nighthawk X6 with factory firmware, forward ports 443,992,1194,5555 to an internal ip ...