Community discussions

MikroTik App

Search found 503 matches

  • 1
  • 2
by Ca6ko
Mon Apr 01, 2024 11:50 am
Forum: Wireless Networking
Topic: Which bluetooth
Replies: 3
Views: 328

Re: Which bluetooth

The bluetooth in the Mikrotik is for the IoT. And all the control is located there. Therefore, it is possible that the corresponding package is required for operation.
by Ca6ko
Wed Mar 27, 2024 9:09 pm
Forum: Wireless Networking
Topic: NetMetal5 to NetMetal AC² problem
Replies: 4
Views: 615

Re: NetMetal5 to NetMetal AC² problem

Update the device via the test branch to 7.12.1, then update the Stable branch to 7.14.1.
NetMetal AC² is an old device.
The new device is a NetBox 5 ax
by Ca6ko
Wed Mar 06, 2024 6:21 pm
Forum: General
Topic: RB5009UPr+S+IN power problems?
Replies: 15
Views: 2072

Re: RB5009UPr+S+IN power problems?

I have not.
by Ca6ko
Wed Mar 06, 2024 8:30 am
Forum: General
Topic: PoE Compatibility: MikroTik RB3011 & Ruijie RG-RAP6202(G)
Replies: 10
Views: 635

Re: PoE Compatibility: MikroTik RB3011 & Ruijie RG-RAP6202(G)

supports the IEEE 802.3af/802.3at PoE standard and operates with a power supply of DC 12V/1.5A.
Correct not and, but or.
Your device is powered by a 12V power supply or 802.3af/802.3at 48V .
by Ca6ko
Mon Mar 04, 2024 5:49 pm
Forum: General
Topic: RB5009UPr+S+IN power problems?
Replies: 15
Views: 2072

Re: RB5009UPr+S+IN power problems?

Have you tried forcing the POE on?
by Ca6ko
Sun Mar 03, 2024 4:16 pm
Forum: Wireless Networking
Topic: cAP AX Blocking Performance at gigabit?
Replies: 6
Views: 716

Re: cAP AX Blocking Performance at gigabit?

1200 Mbits/s and 574 Mbits/s these streams can pass only on wifi ports of pure data there is half of it, so 1774 can not get to ethernet port. CAP AX judging by the specification can not power CRS326-24G-2S+ it does not have enough power even if you use a power supply at 30V, the maximum you can sup...
by Ca6ko
Sun Mar 03, 2024 4:00 pm
Forum: General
Topic: Is Mikrotik discontinued the mANTBox19s
Replies: 4
Views: 323

Re: Is Mikrotik discontinued the mANTBox19s

Yes, there are new AC and AX standard devices.
But antennas have always been Mikrotik's weak link. So a separate antenna will always be the best option. I would recommend the NetBox 5 ax
by Ca6ko
Tue Feb 27, 2024 10:30 am
Forum: Wireless Networking
Topic: Wireless Bridge with hAP AX3 [SOLVED]
Replies: 6
Views: 3473

Re: Wireless Bridge with hAP AX3 [SOLVED]

Then, I've changed mode to station pseudobridge and hAP AC was able to connect to hAP AX3.
pseudobridge support only appeared in 7.14
by Ca6ko
Fri Feb 23, 2024 7:31 pm
Forum: Wireless Networking
Topic: DFS and radar channels
Replies: 10
Views: 1164

Re: DFS and radar channels

There are more ways to assign frequencies:
You give the format of the terminal command, and the topikstarter uses winbox.
I have not been able to replicate his entry.
by Ca6ko
Fri Feb 23, 2024 3:27 pm
Forum: Wireless Networking
Topic: CAPsMAN hAP AX2 Drops
Replies: 11
Views: 1535

Re: CAPsMAN hAP AX2 Drops

Add ft=yes ft-over-ds=yes to the /interface wifi security this will shorten the switching time.
Enable 5 GHz.
On wifi only the client decides where and when to switch, if the client decides that the connection quality on 2.4 with your SSID is bad he switches. The 2.4 band is probably overloaded.
by Ca6ko
Fri Feb 23, 2024 3:07 pm
Forum: Wireless Networking
Topic: DFS and radar channels
Replies: 10
Views: 1164

Re: DFS and radar channels

However, in addition to channel 5660, it has 5220 as a secondary NO DFS channel.
You did not set the second frequency correctly
by Ca6ko
Fri Feb 23, 2024 2:51 pm
Forum: General
Topic: Restarting interface when it's down ( based on status, not the ping )
Replies: 3
Views: 349

Re: Restarting interface when it's down ( based on status, not the ping )

Try manually setting the speed of the SFP port
by Ca6ko
Fri Feb 23, 2024 10:45 am
Forum: Wireless Networking
Topic: LHG 5 awful tx signal
Replies: 14
Views: 957

Re: LHG 5 awful tx signal

Or set up a super channel
Screenshot_16.jpg
Or use the terminal command
/interface wireless
set [ find default-name=wlan1 ]  antenna-gain=0 
PS Usually reflashing via net install removes the region lock and the superchannel appears
by Ca6ko
Fri Feb 23, 2024 9:51 am
Forum: Wireless Networking
Topic: LHG 5 awful tx signal
Replies: 14
Views: 957

Re: LHG 5 awful tx signal

Try setting the antenna gain parameter to 0
by Ca6ko
Thu Feb 22, 2024 6:31 pm
Forum: RouterBOARD hardware
Topic: Mikrotik hAP ax2 onboard USB 3.0 pads
Replies: 14
Views: 8746

Re: Mikrotik hAP ax2 onboard USB 3.0 pads

On older versions of devices, and perhaps it was related to ROS 6. SoftwareID is linked to the serial number of the device and to the serial number of the memory chip. When the memory chip was replaced, the SoftwareID was different and the license key stopped working. PS It turns out that in AX2 boo...
by Ca6ko
Thu Feb 22, 2024 12:58 pm
Forum: RouterBOARD hardware
Topic: Mikrotik hAP ax2 onboard USB 3.0 pads
Replies: 14
Views: 8746

Re: Mikrotik hAP ax2 onboard USB 3.0 pads

Beautiful work!
Are you saying that after replacing the memory chip you didn't lose your license and you didn't have to modify the bootloader to install the new amount of memory?
Were you able to start the USB socket?
by Ca6ko
Thu Feb 22, 2024 10:42 am
Forum: RouterBOARD hardware
Topic: New L11UG-5HaxD
Replies: 35
Views: 7992

Re: New L11UG-5HaxD

With the wifi-qcom-ac device using 'ap' mode and the wireless device using 'station-bridge' mode, no connection is established. When communicating between old and new drivers, you should use the same settings as for devices from other vendors. That is, use the station-pseudobridge mode. In 7.14 thi...
by Ca6ko
Wed Feb 21, 2024 1:31 pm
Forum: RouterBOARD hardware
Topic: New L11UG-5HaxD
Replies: 35
Views: 7992

Re: New L11UG-5HaxD

I get that but I think as of 7.13 that’s not the case anymore… No everything is still like this and no changes are expected. Old drivers and wifi-qcom are still not compatible. In 7.14, the AX drivers learned how to station-pseudobridge Some help on how to use it with a bridge? There is still one c...
by Ca6ko
Wed Feb 21, 2024 12:58 pm
Forum: Wireless Networking
Topic: Ultimate multi-cAP AX configuration [SOLVED]
Replies: 7
Views: 3152

Re: Ultimate multi-cAP AX configuration [SOLVED]

I have 1000 square meter space with 4 cAP ax (one in each corner). In my opinion 4 points for such an area is not enough. I have an object where, for example, 450 square meters, two floors, 5 points are not enough. Did you do a radio survey? Did you calculate the placement of points, frequency plan...
by Ca6ko
Sun Feb 18, 2024 10:33 pm
Forum: Wireless Networking
Topic: WiFi IPQ -4018 bug in manual modulation configuration. ROS6-7
Replies: 0
Views: 422

WiFi IPQ -4018 bug in manual modulation configuration. ROS6-7

I found a bug please users to confirm. Devices with WiFi Mikrotik on IPQ -4018/19. If you select Data Rates configured uncheck all the boxes with A/G as well as all modulations HT MCS leaving only VHT MCS, the devices stop measuring the signal strength. Screenshot_4.jpg Screenshot_5.jpg Screenshot_9...
by Ca6ko
Thu Feb 15, 2024 10:16 am
Forum: Wireless Networking
Topic: CAPsMAN Wifi and Wifi bridge
Replies: 7
Views: 944

Re: CAPsMAN Wifi and Wifi bridge

That's the other solution @holvoetn was telling you
On map lite exclude wlan interface from bridge, make EOIP interface between map lite and any other Mikrotik device on the network, add EOIP to bridge on both ends.
by Ca6ko
Wed Feb 14, 2024 6:35 pm
Forum: Wireless Networking
Topic: Dual-CAPsMAN (7.13+) issues
Replies: 16
Views: 1209

Re: Dual-CAPsMAN (7.13+) issues

I understand correctly that you have configured 2 old Capsman one on CHR the other on mAP lite. PS. After resetting to CAP mode, the second capsman was deleted In this case on CAP ax manager search is enabled on the interface and not by IP address? (When interface search is enabled, IP search does ...
by Ca6ko
Mon Feb 12, 2024 9:08 pm
Forum: Wireless Networking
Topic: CAPsMAN Wifi and Wifi bridge
Replies: 7
Views: 944

Re: CAPsMAN Wifi and Wifi bridge

Could you explain how SXTsq would help here?
The SXTsq Lite2 device is installed separately in the switch port, and only the mAP Lite is connected to it via wifi. It has a level 3 license so other devices will not be able to connect to this bridge. Authorization is at your discretion
by Ca6ko
Sat Feb 10, 2024 11:22 am
Forum: Wireless Networking
Topic: CAPsMAN Wifi and Wifi bridge
Replies: 7
Views: 944

Re: CAPsMAN Wifi and Wifi bridge

The easiest and fastest way is to buy a SXTsq device and set up a separate WiFi bridge.
by Ca6ko
Tue Feb 06, 2024 5:22 pm
Forum: Wireless Networking
Topic: Radio packet loss
Replies: 2
Views: 489

Re: Radio packet loss

What makes you think that a radio channel has the same properties as a cable? Packet loss on the radio is a normal mode of operation. After all, you are using a common transmission medium and judging by CCQ you are not the only one using it.
by Ca6ko
Fri Feb 02, 2024 1:53 pm
Forum: Wireless Networking
Topic: Unable to use 5580/Ceee on hAP ax2 but can on hAP ac lite [SOLVED]
Replies: 19
Views: 1480

Re: Unable to use 5580/Ceee on hAP ax2 but can on hAP ac lite [SOLVED]

It's a strange situation with the United Kingdom. You can select such country in the wifi settings, but you cannot see what restrictions for this country.
Both in the old version of the driver and in the new one. Please contact technical support
by Ca6ko
Thu Feb 01, 2024 4:39 pm
Forum: General
Topic: How good is PCC with a 1:2 ratio
Replies: 16
Views: 1333

Re: How good is PCC with a 1:2 ratio

I posted, I've tried with a x86 router (a R86S mini system) and the results were the same.
Try limiting the 2Gbit ISP to 1Gbit and see how it works. It seems to me that there is a bottle neck for 2Gbit in your network design after all
by Ca6ko
Thu Feb 01, 2024 4:26 pm
Forum: Wireless Networking
Topic: mantbox ax? what client CPE?
Replies: 2
Views: 540

Re: mantbox ax? what client CPE?

what is the output power and sensitivity , tthere is no mention in the specifications.
You just couldn't find them, it's a Mikrotik.
by Ca6ko
Mon Jan 29, 2024 8:21 pm
Forum: General
Topic: How good is PCC with a 1:2 ratio
Replies: 16
Views: 1333

Re: How good is PCC with a 1:2 ratio

Is your router capable of pumping more than 2Gbps?
by Ca6ko
Sun Jan 28, 2024 2:15 pm
Forum: General
Topic: Problem getting hap ax lite as CAP with RB3011UiAS as CAPsMAN
Replies: 5
Views: 555

Re: Problem getting hap ax lite as CAP with RB3011UiAS as CAPsMAN

be honest I was not able to find the "CAPsMAN" button in winbox
Screenshot_5.jpg
There she is
by Ca6ko
Wed Jan 24, 2024 9:33 pm
Forum: Beginner Basics
Topic: DHCP doesn't deliver an address for a gateway
Replies: 89
Views: 4357

Re: DHCP doesn't deliver an address for a gateway

3 days is a very short time for microtik, usually you need 2 weeks to understand its peculiarities. You're trying to use your cisco experience and it's all wrong here, this experience is getting in the way. Let's start with the basics, the quick settings tab is one-size-fits-all. You can enter it on...
by Ca6ko
Wed Jan 24, 2024 9:34 am
Forum: Beginner Basics
Topic: Dual Wan, Dual LAN, No LB or Fail Over on 7.13.2
Replies: 5
Views: 982

Re: Dual Wan, Dual LAN, No LB or Fail Over on 7.13.2

If you add a route to 0.0.0.0.0/0 with a longer distance to each router, you will get more Internet channel reservation.
/ip route
add disabled=no dst-address=0.0.0.0/0 gateway=192.168.10.2 distance=10 routing-table=main suppress-hw-offload=no
by Ca6ko
Mon Jan 22, 2024 2:53 pm
Forum: RouterBOARD hardware
Topic: mANTBox 15s vs OmniTIK 5 ac
Replies: 9
Views: 1549

Re: mANTBox 15s vs OmniTIK 5 ac

You can try to push stations to the other by using ACLs. I don't mean the Access List on the Access Point, I mean the of Connect List on the Station. With the help of Connect List you can set the order of Access Points to which the Station is connected. With the parameter Allow Signal Out Of Range ...
by Ca6ko
Mon Jan 22, 2024 1:03 pm
Forum: The Dude
Topic: Get Dude Status
Replies: 4
Views: 2527

Re: Get Dude Status

I want a stupid hard to ignore status indicator for the office.
Turn on an optional audible alert, the louder the harder it is to ignore. :lol:
by Ca6ko
Mon Jan 22, 2024 12:05 pm
Forum: RouterBOARD hardware
Topic: mANTBox 15s vs OmniTIK 5 ac
Replies: 9
Views: 1549

Re: mANTBox 15s vs OmniTIK 5 ac

you won't be able to control stations about which AP they'll connect
Why, if you use a Connect List, you can distinguish access points by MAC.
by Ca6ko
Wed Jan 10, 2024 3:26 pm
Forum: Wireless Networking
Topic: Station Mode (not pseudobridge) ?
Replies: 6
Views: 1246

Re: Station Mode (not pseudobridge) ?

For bridge-type connections, it is better to use devices specially designed for this purpose.
Devices with directional antennas.
For example SXTsq 5 ac
by Ca6ko
Wed Jan 10, 2024 9:39 am
Forum: Wireless Networking
Topic: Most bandwith with Dynadish5
Replies: 12
Views: 2058

Re: Most bandwith with Dynadish5

In such a case, set the safety interval to long. The SGI abbreviation will disappear in the connection speed. Check whether the CCQ should increase under load. The rest, I think, should be left as it is. There is a "Safe mode" button to avoid losing access. It should be pressed before you ...
by Ca6ko
Tue Jan 09, 2024 2:25 pm
Forum: Wireless Networking
Topic: Most bandwith with Dynadish5
Replies: 12
Views: 2058

Re: Most bandwith with Dynadish5

You still haven't specified the wattage at which your points operate. According to the RBDynaDishG-5HacDr3 specification for maximum speed the power should not exceed 22dBm Screenshot_1.jpg Screenshot_4.jpg I think it was mentioned somewhere that the old ROS driver has a 280Mbit limit. These are the...
by Ca6ko
Sun Jan 07, 2024 3:49 pm
Forum: Wireless Networking
Topic: Most bandwith with Dynadish5
Replies: 12
Views: 2058

Re: Most bandwith with Dynadish5

You did not specify the main parameter of the radiolink signal strength. Let's go over the basic settings first Show the TX/RX signal for each chane Show the power that is set. You are operating in the frequency range of 5450-5530 MHz. Are you sure there are no interfering stations in it? First reco...
by Ca6ko
Wed Jan 03, 2024 8:44 pm
Forum: Wireless Networking
Topic: MikroTik Metal 2SHPn there is no supply voltage
Replies: 1
Views: 1383

Re: MikroTik Metal 2SHPn there is no supply voltage

Why repair it right away, maybe it's not that bad? How does the device behave after powering on? Looks like you made the mistake of many beginners, after resetting the device can boot for several minutes, if you turn off the power at this point we get a brick. In this case helps netinstall. In Ukrai...
by Ca6ko
Tue Jan 02, 2024 4:27 pm
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

Well, you didn't want to open a separate topic, so we'll continue here. Let's look at the only link that doesn't work for me. This link of 10 (ten) km. The signal was around -80 dBm on both sides and the throughput at 10 mHz bandwidth You said that only one radio link is not working. But in your las...
by Ca6ko
Thu Dec 28, 2023 8:34 pm
Forum: Wireless Networking
Topic: Transparently bridge two lans using wifi?
Replies: 1
Views: 620

Re: Transparently bridge two lans using wifi?

No way.
Or write your driver.
by Ca6ko
Thu Dec 28, 2023 2:45 pm
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

Is there no change in the logs now? Show me.
To downgrade to 7.12, you must first remove the Wireless package and only then downgrade.
If you have wifi access, you can't do that. If you access the device via cable, you don't have to press the button to netinstall.
by Ca6ko
Thu Dec 28, 2023 11:30 am
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

@frengo It's certainly good that you posted your paraphrase of the netinstall instructions, but that's not what we're interested in. Did downgrading the ROS version to 6 fix the authentication problem or not? PS I wasted the whole afternoon trying to get down from 7.13 but there was no way, not even...
by Ca6ko
Wed Dec 27, 2023 5:03 pm
Forum: Wireless Networking
Topic: "Wi-Fi failover"? [SOLVED]
Replies: 1
Views: 822

Re: "Wi-Fi failover"? [SOLVED]

Of course you do.
Tool/Netwach ping to the device, if there is no ping turn on wifi interface, if there is ping turn off wifi interface.
by Ca6ko
Wed Dec 27, 2023 4:33 pm
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

I'm not a psychic. Tell me in detail how you do the downgrade. In general, search here on the forum many times written in detail how to downgrade the firmware version. Since 7.13 changes the configuration of the radio. I would recommend to use the Backup that you made before upgrading to 7.13 or bet...
by Ca6ko
Wed Dec 27, 2023 3:11 pm
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

Obviously both Main and extra, right?
I haven't seen your configuration so I can't say. You should only install the extra package if you use it, and then only the necessary packages.
PS Usually one main package is enough
by Ca6ko
Wed Dec 27, 2023 2:58 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 272711

Re: v7.13 [stable] is released!

First impression is working better in test have better speed, TX and RX rate are more stable.
How much better, the numbers
before update has been around -50 now is -74. Check power it is the maximum like before.
New parameter antenna-gain set to 0
by Ca6ko
Wed Dec 27, 2023 2:23 pm
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

What could it be? There are approximately 256 reasons. Open a new topic. The -80 signal is very weak. We'll figure out what's going on. Show me 1. The settings of each point 2. Scanning the air from each point. PS The first thing I suggest on this unit is to downgrade the ROS version to 6.49.10 Lon...
by Ca6ko
Wed Dec 27, 2023 1:53 pm
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

I still haven't understood what makes them resistant to these attacks.... WPA3, ac2, 802.11w, MFP, Wifi5 class? Screenshot_27.jpg Based on your description, I can draw 3 conclusions 1. You have low qualification as a radio engineer. You have a very poor understanding of the settings of the radio li...
by Ca6ko
Wed Dec 27, 2023 10:20 am
Forum: Wireless Networking
Topic: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)
Replies: 31
Views: 7930

Re: How to configure WPA3 only not WPA2/WPA3 transitional mode (fixed)

What equipment should I use instead of mine? To give you actionable advice, you have not provided any information about the radiolink. You have purchased devices with 3 channels. Does that mean you have special antennas for them with 3 polarizations? If you don't look into the situation and answer ...
by Ca6ko
Wed Dec 27, 2023 10:02 am
Forum: Wireless Networking
Topic: CAP XL AC cannot exceed 350mb speed at 5Ghz
Replies: 11
Views: 2176

Re: CAP XL AC cannot exceed 350mb speed at 5Ghz

It should be near to 700-800mbps. That's not a correct statement The teorical speed 833mbps for 80mhz bw at 5Ghz. This is not a correct statement. You are mistaken in terms and definitions. 833 is not a theoretical speed, but a channel speed. In this case, the data rate is usually 1/2. 420mbps is t...
by Ca6ko
Wed Dec 27, 2023 9:36 am
Forum: Beginner Basics
Topic: One of the two WiFi interfaces is not working
Replies: 7
Views: 959

Re: One of the two WiFi interfaces is not working

wifi2 - 5 Ghz (with Dynamic Frequency Selection)
Since the frequency selection is auto worth, there is probably a DFS check going on, which takes 10 min. Open the interface and see its status in the bottom line.
by Ca6ko
Wed Dec 27, 2023 8:58 am
Forum: General
Topic: L009UiGS-RM mode button?
Replies: 2
Views: 631

Re: L009UiGS-RM mode button?

by Ca6ko
Sun Dec 24, 2023 6:05 pm
Forum: Scripting
Topic: System health voltage string conversion ROS7.13
Replies: 5
Views: 1054

Re: System health voltage string conversion ROS7.13

[system health get value-name=value [find type=V]]
Try this.
by Ca6ko
Wed Dec 20, 2023 12:46 pm
Forum: General
Topic: Two Starlinks, management interface access
Replies: 15
Views: 2719

Re: Two Starlinks, management interface access

You can't do this.
No option in the starlink router to do this.
In the old version of the application it was possible, I changed it for myself. Now there is no such item in the network settings menu. I apologize.
by Ca6ko
Wed Dec 20, 2023 12:26 pm
Forum: Wireless Networking
Topic: Capsmanv1 upgrade to v2
Replies: 8
Views: 2866

Re: Capsmanv1 upgrade to v2

Please don't be confused by the terms CAPsMAN v2 is working starting from RouterOS v6.22rc7. CAPsMAN v1 is discontinued starting from 6.37. https://wiki.mikrotik.com/wiki/Manual:CAPsMAN WifiWave2 CAPsMAN https://help.mikrotik.com/docs/pages/vi ... ve2CAPsMAN You need to configure the Capsman v2 to C...
by Ca6ko
Tue Dec 19, 2023 9:25 am
Forum: General
Topic: L009UiGS-2HaxD - WifiWave2 CAPsMAN and wireless package
Replies: 9
Views: 2310

Re: L009UiGS-2HaxD with CAPsMANv2 and wireless package

Please don't be confused by the terms CAPsMAN v2 is working starting from RouterOS v6.22rc7. CAPsMAN v1 is discontinued starting from 6.37. https://wiki.mikrotik.com/wiki/Manual:CAPsMAN WifiWave2 CAPsMAN https://help.mikrotik.com/docs/pages/viewpage.action?pageId=46759946#WifiWave2(7.12andolder)-Wif...
by Ca6ko
Tue Dec 19, 2023 8:31 am
Forum: General
Topic: Powering Mikrotik hAP ax² Router from Power Bank
Replies: 5
Views: 1246

Re: Powering Mikrotik hAP ax² Router from Power Bank

Read the Chinese advertising information correctly. USB 1A 12V means 5*1=5W
by Ca6ko
Mon Dec 18, 2023 8:30 pm
Forum: RouterBOARD hardware
Topic: New L11UG-5HaxD
Replies: 35
Views: 7992

Re: New L11UG-5HaxD

Turns out there's a lot of new products coming from Mikrotik.
by Ca6ko
Mon Dec 18, 2023 8:19 pm
Forum: RouterBOARD hardware
Topic: New L11UG-5HaxD
Replies: 35
Views: 7992

Re: New L11UG-5HaxD

Dreaming about device ...5HaxD6axD
Why dream so faintly?
7HbeQ, 7HbeO :wink:
by Ca6ko
Mon Dec 18, 2023 8:03 pm
Forum: RouterBOARD hardware
Topic: New L11UG-5HaxD
Replies: 35
Views: 7992

Re: New L11UG-5HaxD

Without nstreme or nv2 support this is unuseable for outdoor WISP operation.
Why.
There will never be these protocols in Wifi 6.
Wifi 5 wave 2 is already superior to nv2 in some respects.
by Ca6ko
Mon Dec 18, 2023 3:09 pm
Forum: General
Topic: Two Starlinks, management interface access
Replies: 15
Views: 2719

Re: Two Starlinks, management interface access

I can get to one of them by adding the appropriate route to 192.168.1.1/32 gateway eth1 or eth2 and enabling one or the other, but I would like to be able to access both. You need to connect to Starlink and change the internal network addressing. Instead of 192.168.1.1 set something like 192.168.23...
by Ca6ko
Sun Dec 17, 2023 6:41 pm
Forum: Wireless Networking
Topic: Any benefit to wave2 for point-to-points?
Replies: 2
Views: 1555

Re: Any benefit to wave2 for point-to-points?

Theoretically, according to the standard, wave 1 and wave 2 differ only in the distribution of airtime between clients, so when there is only one client there should be no difference. But the difference between wave1 and wave2 microtic driver gives a small speed increase.
by Ca6ko
Sat Dec 16, 2023 2:34 pm
Forum: Announcements
Topic: v7.13.5 [stable] is released!
Replies: 909
Views: 272711

Re: v7.13 [stable] is released!

Hap ac2 got a cyclic reboot after upgrading from 7.12 to 7.13. The device boots up and after 30-40 sec goes into reboot. Supout file does not allow downloading the reboot occurs before downloading. I have not found anything in the logs. At the moment of availability I reset the config. After manual ...
by Ca6ko
Thu Dec 14, 2023 6:15 pm
Forum: General
Topic: Multi WAN and port forwarding
Replies: 23
Views: 3755

Re: Multi WAN and port forwarding

/ip address add address=10.0.0.1/24 interface=ether11-LAN network=10.0.0.0 add address=10.0.0.95/24 interface=ether10-INT network=10.0.0.0 You need to either bridge the LAN ports ether11-LAN, ether10-INT and set one address per bridge, or split them into different networks 10.0.0.1/25, 10.0.0.128/2...
by Ca6ko
Thu Dec 14, 2023 3:36 pm
Forum: General
Topic: Unable to connect Tuya devices
Replies: 19
Views: 4392

Re: Unable to connect Tuya devices

with WPA auth.
Do these devices support this ancient standard?
Reset the Mikrotik to factory settings, merge the ports into bridge and do not touch anything else.
by Ca6ko
Sun Dec 10, 2023 12:42 pm
Forum: General
Topic: EoIP with Multiple WAN
Replies: 10
Views: 2071

Re: EoIP with Multiple WAN

You'll have to figure it out for yourself. Because you have already configured multiwan on the router, it depends on these settings how you need to configure it. Otherwise my advice can break the whole work of the config. So look on the forum threads about multiwan there these settings are considere...
by Ca6ko
Sun Dec 10, 2023 12:12 pm
Forum: General
Topic: EoIP with Multiple WAN
Replies: 10
Views: 2071

Re: EoIP with Multiple WAN

Then you need to configure multiwan that the local traffic of the router itself goes to the wan port from which the request came.
by Ca6ko
Sun Dec 10, 2023 10:55 am
Forum: General
Topic: EoIP with Multiple WAN
Replies: 10
Views: 2071

Re: EoIP with Multiple WAN

If an EOIP tunnel is established and it is bridge enabled, then no IP addresses are used between LAN1 hosts, they are in the same broadcast domain and frames go to MAC addresses. So you have an error in the scheme. For simplicity of understanding EOIP is a cable that connects LAN1 bridges into one n...
by Ca6ko
Sun Dec 10, 2023 10:15 am
Forum: Wireless Networking
Topic: Migrating a mesh of RB952Ui-5ac2nD to single C53UiG+5HPaxD2HPaxD
Replies: 43
Views: 6228

Re: Migrating a mesh of RB952Ui-5ac2nD to single C53UiG+5HPaxD2HPaxD

Maybe we should move the existing access point 5 feet?
The optimal location of the access point and router are usually not the same.
PS
Sometimes you can get results by moving the AP within 10 cm.
https://www.youtube.com/watch?v=aqqEYz38ens
by Ca6ko
Sat Dec 09, 2023 12:14 pm
Forum: General
Topic: RB5009 offering DHCP leases to other switches
Replies: 3
Views: 1756

Re: RB5009 offering DHCP leases to other switches

But that is only one of 5 devices that are all apparently being offered DHCP leases when no client appears to be configured.
Show the config
by Ca6ko
Sat Dec 09, 2023 12:10 pm
Forum: Wireless Networking
Topic: SECTOR ANTENNA SIGNAL STRENGTH LOW EVEN AT CLOSE RANGE
Replies: 2
Views: 1658

Re: SECTOR ANTENNA SIGNAL STRENGTH LOW EVEN AT CLOSE RANGE

Why are you starting a new topic? https://forum.mikrotik.com/viewtopic.php?p=1040406#p1040406 Again, you do not provide any data that we can help you with. 1. Show measurements of the signal level at different frequencies 2. Show the settings of both points 3. Show what power is set 4. Show a photo ...
by Ca6ko
Fri Dec 08, 2023 8:46 am
Forum: Beginner Basics
Topic: How to configure identical WiFi on MikroTik so that the devices switch automatically?
Replies: 8
Views: 2368

Re: How to configure identical WiFi on MikroTik so that the devices switch automatically?

Some IoT devices also memorize the MAC of the access point. When you change access points, you must either use the MAC of the previous access point or re-bind the devices.
by Ca6ko
Thu Dec 07, 2023 9:38 am
Forum: Wireless Networking
Topic: Migrating a mesh of RB952Ui-5ac2nD to single C53UiG+5HPaxD2HPaxD
Replies: 43
Views: 6228

Re: Migrating a mesh of RB952Ui-5ac2nD to single C53UiG+5HPaxD2HPaxD

/interface wireless channels add band=2ghz-onlyn frequency=2412 list="2.4" name=ch1 width=20 add band=2ghz-onlyn frequency=2417 list="2.4" name=ch2 width=20 add band=2ghz-onlyn frequency=2437 list="2.4" name=ch6 width=20 add band=2ghz-onlyn frequency=2442 list="2....
by Ca6ko
Thu Dec 07, 2023 12:09 am
Forum: Wireless Networking
Topic: Sector antenna not broadcasting
Replies: 6
Views: 1710

Re: Sector antenna not broadcasting

please someone should help me figure this out...i need to close out on this configurations please its very urgent Usually this is because the client and access point's WIFI parameters do not match. Unfortunately my IT tambourine is on an upgrade, and without it I can't determine what they don't mat...
by Ca6ko
Wed Dec 06, 2023 11:52 pm
Forum: Wireless Networking
Topic: Migrating a mesh of RB952Ui-5ac2nD to single C53UiG+5HPaxD2HPaxD
Replies: 43
Views: 6228

Re: Migrating a mesh of RB952Ui-5ac2nD to single C53UiG+5HPaxD2HPaxD

Is it meaningful to use CAPsMAN to manage APs (2.4 and 5) on the same and only device? That's what I usually do. In the logs I see that the connects to 5, then get's roamed to 2.4 then disconnects, that repeats a few times and then it gives up and picks LTE : It's a peculiarity of WiFi that the cli...
by Ca6ko
Wed Dec 06, 2023 7:41 pm
Forum: Wireless Networking
Topic: Sector antenna not broadcasting
Replies: 6
Views: 1710

Re: Sector antenna not broadcasting

According to the rb912uag-5hpnd product page it does not support 5060MHz as a valid frequency. :lol:
by Ca6ko
Tue Dec 05, 2023 7:49 pm
Forum: Wireless Networking
Topic: Wi-Fi 6E devices for an new project
Replies: 10
Views: 5027

Re: Wi-Fi 6E devices for an new project

No. It took longer for AX, because ...
The transition to AX is still underway, no wAP AX, Audience AX devices yet. Also there are no point to point AX devices yet.
Taking into account that Mikrotik certified in FCC 4 devices in 2022 and 5 in 2023, wifi7 devices will have to wait for a long time.
by Ca6ko
Sun Dec 03, 2023 12:06 am
Forum: General
Topic: Wireguard tunnel - speed problem
Replies: 19
Views: 3995

Re: Wireguard tunnel - speed problem

You've encountered the ultimate traffic generator opportunity.
Do not run the traffic generator on the device under test, the measurements will be erroneous.
You can estimate the maximum traffic generation capability of the device by running a TCP test to 127.0.0.1
by Ca6ko
Tue Nov 28, 2023 7:40 pm
Forum: General
Topic: The LED indicator light on Hap ax2 cannot be turned off.
Replies: 7
Views: 1900

Re: The LED indicator light on Hap ax2 cannot be turned off.

Black electrical tape 1-2 layers :lol:
by Ca6ko
Tue Nov 28, 2023 9:21 am
Forum: Wireless Networking
Topic: Wifi AP (CAP Ax) in 'bridge mode' possible?
Replies: 4
Views: 2035

Re: Wifi AP (CAP Ax) in 'bridge mode' possible?

Quick version:
1. Connect using Winbox MAC on ether2 of cAP AX
I prefer a slightly different way
2. System/Reset Configuration check Caps Mode and reset the configuration. The result will be the same.
by Ca6ko
Fri Nov 24, 2023 11:33 am
Forum: Wireless Networking
Topic: LHG-XL-HP5 mysterious fluctuating
Replies: 7
Views: 1827

Re: LHG-XL-HP5 mysterious fluctuating

That didnt work. What didn't work? Did you build a profile of the radio path and make sure the first Fresnel zone was clear? replaced all hardware, still the same. No one advised you to change the equipment. any suggestions? What advice do you expect from the forum members if you don't give any inf...
by Ca6ko
Fri Nov 24, 2023 11:10 am
Forum: Beginner Basics
Topic: mikrotik to mikrotik EoIP problem [SOLVED]
Replies: 5
Views: 1985

Re: mikrotik to mikrotik EoIP problem [SOLVED]

You have a second tunnel and a third node in your schematic. It can also have an impact. The choice of EOIP to build a single local network with one broadcast domain is not clear initially, but the networks have different addressing and different broadcast domains. It is more correct, in this case, ...
by Ca6ko
Tue Nov 21, 2023 11:20 am
Forum: General
Topic: Suggestion: expand the functionality of the LED .
Replies: 0
Views: 1800

Suggestion: expand the functionality of the LED .

LEDs of three colors green blue red are found in microtik devices. I propose to install RGB LEDs in new devices. And set color control in ROS. Then you can easily and clearly label and group the ports. For example, if you set blue color for WAN port and yellow color for bridge ports, you can immedia...
by Ca6ko
Thu Nov 16, 2023 1:15 am
Forum: RouterBOARD hardware
Topic: L009UiGS-2HaxD-IN power consumption
Replies: 8
Views: 2984

Re: L009UiGS-2HaxD-IN power consumption

You're not asking the right question so you won't get an answer. Power consumption as you put it "in standby mode" is a variable that depends on many factors. For example, it depends on the number of connected ports, it depends on the number and signal strength of registered wifi clients. ...
by Ca6ko
Tue Nov 14, 2023 5:32 pm
Forum: Beginner Basics
Topic: Hairpint NAT between two mikrotiks
Replies: 5
Views: 1550

Re: Hairpint NAT between two mikrotiks

what should i have to do?
Describe the problem in as much detail as possible and display a schematic. Personally, with my poor English, I didn't understand anything.
by Ca6ko
Mon Nov 13, 2023 9:44 pm
Forum: Announcements
Topic: v7.13beta [testing] is released!
Replies: 467
Views: 95321

Re: v7.13beta [testing] is released!

- I believe @DanMos79 is asking for an alternative DIY wireless card compatible with WifiWave2 drivers for RB4011, if available in the market. Does new wireless drivers suport QCA9556?(wap ac)? qrt-ac with 128mb... The wifi-qcom-ac-7.13beta1-arm.npk package contains drivers for IPQ4019 and QCA9984 ...
by Ca6ko
Mon Nov 13, 2023 6:27 pm
Forum: Wireless Networking
Topic: LHG-XL-HP5 mysterious fluctuating
Replies: 7
Views: 1827

Re: LHG-XL-HP5 mysterious fluctuating

You're not even showing the tip of the iceberg. Judging by what you are showing to find the causes, you have very little idea of how wifi works. You must be a network engineer. (the network cable has nothing to do with the signal received). I can tell you from the bits and pieces you've shown me. 1....
by Ca6ko
Mon Nov 13, 2023 4:07 pm
Forum: General
Topic: NETWATCH IS BROKEN!!!
Replies: 8
Views: 1439

Re: NETWATCH IS BROKEN!!!

You didn't show what kind of sills you installed. It will be triggered when any threshold is reached. If you claim to have observed an average ping of 600ms, you can set such thresholds. Screenshot_31.jpg Then the main indicator will be 85% packet loss. If false alarms continue, increase the thresho...
by Ca6ko
Mon Nov 13, 2023 12:58 pm
Forum: Wireless Networking
Topic: Unable To Connect AP To CAPsMAN
Replies: 18
Views: 2649

Re: Unable To Connect AP To CAPsMAN

I have added the wifiwave2 package to my RB3011, and lost all of my configurations in the process, so I recreated those...
Are you by any chance trying to connect the incompatible old Capsman and new Wifiwave2 Capsman ?
by Ca6ko
Mon Nov 13, 2023 12:51 pm
Forum: Wireless Networking
Topic: LHG-XL-HP5 mysterious fluctuating
Replies: 7
Views: 1827

Re: LHG-XL-HP5 mysterious fluctuating

You have not provided any information to help you.
There are over 32 reasons, no one wants to guess.
1. The reason is elementary wind oscillation of the mast ...
by Ca6ko
Mon Nov 13, 2023 11:33 am
Forum: General
Topic: NETWATCH IS BROKEN!!!
Replies: 8
Views: 1439

Re: NETWATCH IS BROKEN!!!

This is a peculiarity of Mikrotik, the parameter doesn't seem to exist, but in fact it does. https://help.mikrotik.com/docs/display/ROS/Netwatch In fact, the default settings are as follows Screenshot_27.jpg Triggering is not based on the number of lost packets, but on Thr Avg. Run a long ping and s...
by Ca6ko
Mon Nov 06, 2023 11:52 am
Forum: RouterBOARD hardware
Topic: Burned SMD component
Replies: 7
Views: 2858

Re: Burned SMD component

Ok I found the component on Aliexpress for less than 2,50 euro... 100 pieces... It will take its time to arrive, as soon as I'll get it I'll do my test :) You can short-circuit the inductance to do a test. The Schottky diode must be broken and something else in the red circled area. In general, do ...
by Ca6ko
Fri Oct 27, 2023 9:59 am
Forum: General
Topic: L2TP Client not connecting
Replies: 5
Views: 1138

Re: L2TP Client not connecting

Apparently, you already have one L2TP tunnel to the RRAS server via Mikrotik, and Windows won't give you a second tunnel. Search on the topic 2 L2TP via NAT
by Ca6ko
Mon Sep 25, 2023 10:38 am
Forum: General
Topic: Help to understand strange behavior of L2TP+IPsec VPN
Replies: 1
Views: 485

Re: Help to understand strange behavior of L2TP+IPsec VPN

In general, I did not understand why IPsec connection was not established. I deployed tunnels from the center to the sub-offices and left it like this
by Ca6ko
Mon Sep 25, 2023 6:56 am
Forum: General
Topic: Help to understand strange behavior of L2TP+IPsec VPN
Replies: 1
Views: 485

Help to understand strange behavior of L2TP+IPsec VPN

Help to understand strange behavior of L2TP+IPsec VPN Help me figure this out. Maybe someone has encountered something like this three routers in the network of one provider. public IP addresses with mask /24. One M1 server L2TP two other M2, M3 clients. Between them are configured tunnels L2TP+IPse...
by Ca6ko
Wed Sep 20, 2023 5:44 pm
Forum: General
Topic: Help me create my new 10G home office network
Replies: 3
Views: 2182

Re: Help me create my new 10G home office network

Mikrotik routers with S+ ports
Screenshot_3.jpg
Switches Mikrotik with S+ ports
Screenshot_5.jpg
by Ca6ko
Mon Sep 18, 2023 10:39 pm
Forum: General
Topic: Mikrotik cAp ax does not have 2.4GHz interface?
Replies: 16
Views: 1775

Re: Mikrotik cAp ax does not have 2.4GHz interface?

Try the command first.
/interface/wifiwave2/set master-interface wifi1
then
/interface/wifiwave2/set [ find default-name=wifi2 ] mac-address=78:9A:18:06:42:56
Doesn't help contact tech support.
by Ca6ko
Sun Sep 17, 2023 10:35 pm
Forum: General
Topic: Station Pseudobridge not working with hAP ax2 and hAP ax3 [SOLVED]
Replies: 18
Views: 3147

Re: Station Pseudobridge not working with hAP ax2 and hAP ax3 [SOLVED]

You can try a crutch.
Connect the hub as just a station and establish an EOIP tunnel by adding its bridges to both devices
by Ca6ko
Sun Sep 17, 2023 10:12 pm
Forum: General
Topic: Mikrotik cAp ax does not have 2.4GHz interface?
Replies: 16
Views: 1775

Re: Mikrotik cAp ax does not have 2.4GHz interface?

Your Radio MAC is set to 00 so the default script does not work. It looks like a hardware problem, please contact technical support. The error message says that you cannot set the universal MAC 00 must be set individually. The interface MAC and radio MAC are the same from the factory. Try to set MAC...
by Ca6ko
Fri Sep 15, 2023 9:28 am
Forum: RouterBOARD hardware
Topic: hEX PoE lite - PoE operation [SOLVED]
Replies: 5
Views: 5748

Re: hEX PoE lite - PoE operation [SOLVED]

Where did I misconfigure? "A chain is only as strong as its weakest link." You haven't calculated the budget of the POE. The standard RG45 port is designed for a maximum current of 1A. That is, when powered through the first port, the hex can consume a maximum of 24W when powered from 24V...
by Ca6ko
Wed Sep 13, 2023 11:01 pm
Forum: General
Topic: External antenna for MikroTik mAP 2nD
Replies: 3
Views: 1071

Re: External antenna for MikroTik mAP 2nD

What type of connector is in the picture? This is not a connector, it is a switch MS-156C, used in manufacturing to connect instruments to adjust the device. https://www.hirose.com/product/series/MS-156C# There is an adapter for the SMA https://www.hirose.com/en/product/p/CL0358-0188-8-00 The very ...
by Ca6ko
Sun Sep 10, 2023 10:20 pm
Forum: RouterBOARD hardware
Topic: Replacement Module
Replies: 11
Views: 3693

Re: Replacement Module

The problem lies in the mutual influence of modules on each other. It can be checked quite easily 1. Run a throughput test through one module and without stopping it run a second test through the second module and observe a decrease in throughput through the first module. 2. Start scanning the airwa...
by Ca6ko
Fri Sep 08, 2023 11:03 am
Forum: RouterBOARD hardware
Topic: Waiting for wAP ax...
Replies: 4
Views: 3567

Re: Waiting for wAP ax...

Apparently they can't solve the problem with heat dissipation in a closed case. The ax2 has a lot of holes in the case. Since they haven't submitted for certification yet, it probably won't appear until the end of the year.
by Ca6ko
Fri Sep 08, 2023 10:31 am
Forum: RouterBOARD hardware
Topic: Replacement Module
Replies: 11
Views: 3693

Re: Replacement Module

Your question, paraphrased, sounds like this. "I need to move cargo, what kind of transportation do you recommend?" You're turning the problem upside down. First you need to determine the parameters of the link, and then select the equipment under these parameters. You can use the ubiquity...
by Ca6ko
Fri Sep 08, 2023 9:17 am
Forum: RouterBOARD hardware
Topic: Ethernet - link down
Replies: 26
Views: 10020

Re: Ethernet - link down

but the issue still happen
Downgrade the version until the problem goes away
by Ca6ko
Thu Sep 07, 2023 11:40 pm
Forum: RouterBOARD hardware
Topic: Replacement Module
Replies: 11
Views: 3693

Re: Replacement Module

Wireless : Atheros MiniPCI Wireless 802.11a+b+g 54Mbps 2.4/5GHz It's even worse than I thought wifi3 would be in the days of wifi6. Your links have a single spatial stream. Let me explain a little more. From Main AP1 and AP2 you take out the modules that work on the link with AP18. Do the same in A...
by Ca6ko
Thu Sep 07, 2023 10:21 pm
Forum: RouterBOARD hardware
Topic: Ethernet - link down
Replies: 26
Views: 10020

Re: Ethernet - link down

downgrade 7.8
by Ca6ko
Thu Sep 07, 2023 1:17 pm
Forum: RouterBOARD hardware
Topic: Ethernet - link down
Replies: 26
Views: 10020

Re: Ethernet - link down

Category 6 cables? If yes, try changing to cat5
by Ca6ko
Thu Sep 07, 2023 10:54 am
Forum: RouterBOARD hardware
Topic: Replacement Module
Replies: 11
Views: 3693

Re: Replacement Module

I would recommend abandoning the scheme when one device (AP) serves multiple links. Since in such a case it is very difficult to get rid of their mutual influence. Go to the scheme of one device one link. Then they can be physically separated on some distance than to reduce their mutual influence. A...
by Ca6ko
Tue Sep 05, 2023 10:32 pm
Forum: Wireless Networking
Topic: Wlan hasn't Superchannel and no_contry_set
Replies: 3
Views: 1872

Re: Wlan hasn't Superchannel and no_contry_set

- RB922UAGS-5HPacD-US (USA) is factory locked for 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

- RB922UAGS-5HPacD (International) supports 5150MHz-5875MHz range (Specific frequency range can be limited by country regulations).
by Ca6ko
Tue Sep 05, 2023 4:43 pm
Forum: Wireless Networking
Topic: CapsMAN basic questions
Replies: 2
Views: 2112

Re: CapsMAN basic questions

I haven't worked with ubiquity controller, but from what I've heard they have slightly different logic compared to capsman. Ubiquity controller is used only for downloading settings and then the point can work without it In capsman wifi interface is passed under the control of the controller. The co...
by Ca6ko
Tue Aug 29, 2023 8:56 am
Forum: Wireless Networking
Topic: only Home AP Dual
Replies: 11
Views: 2848

Re: only Home AP Dual

but out of pure curiosity why there is only Home AP Dual? The quikset menu shows the modes in which this device can be used. Since WifiWave2 CAPsMAN is not supported by older devices, so that users are not confused, there is no CAP item. PS If you want to use old and new devices you will have to us...
by Ca6ko
Tue Aug 29, 2023 8:39 am
Forum: Wireless Networking
Topic: Maximum MTU Size on virtual WiFi interfaces
Replies: 23
Views: 4244

Re: Maximum MTU Size on virtual WiFi interfaces

For what reason do you have an additional route created to the network address on the bridge? Screenshot_5.jpg If your network is 192.168.111.0/24, then 192.168.111.0 is a network address and cannot be used as a host address. There are fewer bridge MTUs on the device than MTU interfaces. Screenshot_...
by Ca6ko
Fri Aug 25, 2023 12:31 pm
Forum: General
Topic: Mikrotik Router cannot access Specific Websites
Replies: 7
Views: 1835

Re: Mikrotik Router cannot access Specific Websites

MTU issue when you have a mismatch you can't login to any secure sites like banks or financial companies. I completely agree. Most often such problems occur immediately after adding an interface with a lower MTU to the bridge(e.g. VPN), after which the MTU of the bridge becomes equal to this value....
by Ca6ko
Fri Aug 25, 2023 12:15 pm
Forum: Wireless Networking
Topic: JUMBO Frame support for P2P Bridge Request
Replies: 5
Views: 2183

Re: JUMBO Frame support for P2P Bridge Request

That's right it's not an 802.11 wifi device, it's a wireless Ethernet bridges, it's specifically designed for L2 traffic.
PS They usually require special permission from the authorities to use them
by Ca6ko
Fri Aug 25, 2023 10:59 am
Forum: Wireless Networking
Topic: JUMBO Frame support for P2P Bridge Request
Replies: 5
Views: 2183

Re: JUMBO Frame support for P2P Bridge Request

Using wifi devices to transmit L2 traffic is a very bad idea. L3 traffic should be transmitted via wifi. In wifi, the maximum size of the data field is 2304 bytes.
by Ca6ko
Fri Aug 25, 2023 10:45 am
Forum: Wireless Networking
Topic: CAPsMAN not adding CAPs interfaces to VLAN
Replies: 9
Views: 2848

Re: CAPsMAN not adding CAPs interfaces to VLAN

/caps-man rates
add basic=12Mbps name=rates_2Ghz supported=12Mbps,18Mbps,24Mbps,36Mbps,48Mbps,54Mbps
Why are you limiting the standard to 2003 only-G, why are you disabling the N standard 2008?
by Ca6ko
Fri Aug 25, 2023 10:20 am
Forum: Wireless Networking
Topic: Strange 2.4 ghz issue
Replies: 6
Views: 2315

Re: Strange 2.4 ghz issue

When i use on Tplink cable or 5 ghz i get full speed 100 mbps. But when i use 2.4 ghz i get 1 mbps or more less.
Did I understand your description of the problem in the first post correctly?
by Ca6ko
Thu Aug 24, 2023 9:33 am
Forum: Wireless Networking
Topic: Unexpected low bandwidth
Replies: 4
Views: 1945

Re: Unexpected low bandwidth

Disable the short guard interval, this will increase the stability of the link. The bridge is outdoors, not indoors.
Without radio parameters and network settings, it is difficult to give advice. Only L3 traffic should be transmitted over the radio bridge.
by Ca6ko
Wed Aug 23, 2023 4:02 pm
Forum: RouterBOARD hardware
Topic: hAP lite RB041-2nD how to update?
Replies: 7
Views: 4568

Re: hAP lite RB041-2nD how to update?

Sometimes there is only remote access to the device
by Ca6ko
Wed Aug 23, 2023 3:56 pm
Forum: RouterBOARD hardware
Topic: hAP lite RB041-2nD how to update?
Replies: 7
Views: 4568

Re: hAP lite RB041-2nD how to update?

Find the fix-space-6.47-smips.npk file on the net, copy it to your device and reboot it. After that there will be enough free space for updating. This problem appeared and was solved back in 2020-21. Apparently your device has been in the distributor's warehouse since then PS https://forum.mikrotik....
by Ca6ko
Mon Aug 21, 2023 8:58 am
Forum: Wireless Networking
Topic: LDF2 + dish in 2023
Replies: 4
Views: 2239

Re: LDF2 + dish in 2023

so that means this sat+sxt combo is ~27dBi gain? No, that means the signal's about the same. Metal has one channel with -71 on SXT with two channels with the same level, and two channels is plus 3dB. There is one flaw in your metal data. The signal level from SXT to metal is -62dB and from metal to...
by Ca6ko
Wed Aug 16, 2023 11:26 am
Forum: Wireless Networking
Topic: Missing CAPsMAN Menu Button in Winbox?
Replies: 3
Views: 2353

Re: Missing CAPsMAN Menu Button in Winbox?

Installing wifiwave2 moved all capsman settings to the wireless menu
by Ca6ko
Wed Aug 16, 2023 11:14 am
Forum: Wireless Networking
Topic: WiFi client disconnects from AP at relatively good signal
Replies: 3
Views: 2057

Re: WiFi client disconnects from AP at relatevly good signal

A relatively good signal is -60, -80...-75 is a poor or satisfactory signal.
The client starts looking for another access point when the signal strength is weaker than -68. MSC7 requires a signal stronger than -64
by Ca6ko
Fri Aug 04, 2023 8:04 am
Forum: Beginner Basics
Topic: Please I need help (hap AX2)
Replies: 9
Views: 1548

Re: Please I need help (hap AX2)

Try changing the network connections. Mikrotik after netinstall has an IP address 0.0.0.0 connection problem was related to this. Something in the computer is blocking access.
Try to set the address 0.0.0.2 on your computer.
by Ca6ko
Fri Aug 04, 2023 7:48 am
Forum: Beginner Basics
Topic: Please I need help (hap AX2)
Replies: 9
Views: 1548

Re: Please I need help (hap AX2)

It's just the winbox not displaying the information. I've had such cases, I don't remember the exact cause. But the point is that the winbox does not receive information from the device, so all fields are empty.
PS It's a network problem.
by Ca6ko
Wed Jul 26, 2023 6:35 pm
Forum: Beginner Basics
Topic: Network speed very poor
Replies: 10
Views: 1875

Re: Network speed very poor

These problems are related to the ISP's hardware settings. It has nothing to do with the Mikrotik.
Turn on the TP-Link NX510v to the ISP and connect the Mikrotik between the computer and the TP-Link NX510v and check the speed.
by Ca6ko
Wed Jul 26, 2023 6:24 pm
Forum: General
Topic: Bridge Layer 2 and LAN DHCP going stuck
Replies: 8
Views: 926

Re: Bridge Layer 2 and LAN DHCP going stuck

and I make the bridge enable DHCP snooping and add ether1 & ether2 to this bridge. after this, I plug the ether-2 wire into the unmanageable switch and also plug ether-5 in the switch You made a loop by connecting Mikrotik 2 and 5 ports through a switch. The RSTP protocol breaks the loop and di...
by Ca6ko
Thu Jul 20, 2023 8:47 am
Forum: Wireless Networking
Topic: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]
Replies: 45
Views: 6426

Re: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]

In the HAP AC device, the wlan1 interface operates at 2.4GHz and the wlan2 interface operates at 5GHz. Your ISP operates at 2462. In the HAP AX2, the interfaces work differently wlan1 works at 5GHz and wlan2 works at 2.4GHz. You need to apply all settings to the wlan2 interface. Show the complete me...
by Ca6ko
Wed Jul 19, 2023 2:43 pm
Forum: General
Topic: Wireguard between two mikrotik
Replies: 18
Views: 2357

Re: Wireguard between two mikrotik

/ip route
add disabled=no dst-address=10.10.0.100/24 gateway=wireguard routing-table=\
main suppress-hw-offload=no
by Ca6ko
Wed Jul 19, 2023 2:21 pm
Forum: Wireless Networking
Topic: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]
Replies: 45
Views: 6426

Re: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]

@elbantany
It looks like you didn't notice that the channels were swapped in AC and AX2. In AX2, 2GHz is wlan2, 5GHz is wlan1.
by Ca6ko
Wed Jul 19, 2023 2:02 pm
Forum: Wireless Networking
Topic: SXTSQ 5 AC low throughput
Replies: 3
Views: 1762

Re: SXTSQ 5 AC low throughput

You've had 36 link drops. There is a high probability that there is interference in the form of swaying tree branches, or the masts of access points are swaying. It is also possible that the link is disconnected due to radar detection. For stable operation in the 80 MHz band at maximum speed in the ...
by Ca6ko
Mon Jul 17, 2023 1:32 pm
Forum: RouterBOARD hardware
Topic: Newer SXT design VS original
Replies: 2
Views: 2534

Re: Newer SXT design VS original

you can’t get them tight enough to a pole nor adjust azimuth.
This requires the use of a special mount
https://mikrotik.com/product/qm_x#fndtn-gallery
by Ca6ko
Sun Jul 16, 2023 9:49 pm
Forum: Scripting
Topic: Who have as native the Cyrillic alphabet, please help here...
Replies: 10
Views: 2477

Re: Who have as native the Cyrillic alphabet, please help here...

I can help, but I didn't realize what was needed. There is such a table of translation of Ukrainian alphabet by Latin alphabet. Screenshot_12.jpg CP1251 It, except russian, also contains all symbols for other Slavic languages: Ukrainian, Belarusian, Serbian, Macedonian and Bulgarian. I can help only...
by Ca6ko
Sun Jul 16, 2023 9:04 pm
Forum: General
Topic: Wireguard between two mikrotik
Replies: 18
Views: 2357

Re: Wireguard between two mikrotik


Office1
/ip/address
add address=10.255.255.1/30 interface=wireguard1
/ip/address
add address=10.255.255.1/30 interface=Wireguard-HotSpot
by Ca6ko
Sat Jul 15, 2023 1:08 pm
Forum: Wireless Networking
Topic: ax series lineup WiFi issues
Replies: 344
Views: 133719

Re: ax series lineup WiFi issues

I have 11 Link downs
This number indicates how many times no clients have been connected to the interface. It is only relevant when there is a client that is permanently connected (radio bridge mode).
PS The screenshot shows just the moment when there are no registered clients.
by Ca6ko
Sat Jul 15, 2023 1:03 pm
Forum: Wireless Networking
Topic: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]
Replies: 45
Views: 6426

Re: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]

Try setting it up like this
by Ca6ko
Sat Jul 15, 2023 12:20 pm
Forum: Wireless Networking
Topic: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]
Replies: 45
Views: 6426

Re: (ASK) Upgrade Mikrotik ac2 v6 to Mikrotik ax2 v7 [SOLVED]

Judging by the fact that radio-name=BACKUP-1, you are using backups. Therefore, clear the configuration completely, as the work with routing tables has changed in v7.
by Ca6ko
Fri Jul 14, 2023 10:08 am
Forum: General
Topic: Routing Not Working As Expected
Replies: 2
Views: 454

Re: Routing Not Working As Expected

You need to firewall additionally block access to 8.8.8.8 through all other interfaces except the required ether1.
When you disable the ether1 interface, all routes associated with it are disabled.
As a test you can cut the connection between ISP1 and Switch1, everything will work as you wanted.
by Ca6ko
Tue Jul 11, 2023 5:36 pm
Forum: General
Topic: Mikrotik Router PPTP Client Activation Issue Help [SOLVED]
Replies: 3
Views: 617

Re: Mikrotik Router PPTP Client Activation Issue Help [SOLVED]

Re-flash the device via netinstall and try again.
What device?
What version of ROS?
by Ca6ko
Mon Jul 10, 2023 9:32 pm
Forum: General
Topic: Different model in box and device [SOLVED]
Replies: 6
Views: 733

Re: Different model in box and device [SOLVED]

These two models are even available on Mikrotik's website. It isn't. The SXT 5ac model has been out of production for a long time (about 5 years), it had a level 3 license. and a narrower radiation pattern than the SA Instead, the SXTsq 5 ac model is being produced. PS If you have license 4 then ev...
by Ca6ko
Sun Jul 09, 2023 11:38 pm
Forum: General
Topic: Dual WAN/Router internet backup
Replies: 17
Views: 1580

Re: Dual WAN/Router internet backup

If there are errors in the text of the netwatch script, its work may stop
by Ca6ko
Sun Jul 09, 2023 11:21 pm
Forum: General
Topic: Dual WAN/Router internet backup
Replies: 17
Views: 1580

Re: Dual WAN/Router internet backup

No need to configure firewall rules with /32 routes but you can if you want. Here is an example, the channel is configured through wlan1 at the moment interface wlan1 is not connected to the access point. If there is no blocked access to 1.0.0.1 through other interfaces, as you can see the route to...
by Ca6ko
Sun Jul 09, 2023 7:24 pm
Forum: General
Topic: Dual WAN/Router internet backup
Replies: 17
Views: 1580

Re: Dual WAN/Router internet backup

You are right, I don't need the recursive routing. In this case, set routes without using recursive routing. You need to additionally deny access to the test IP through any other interface than the desired one in the firewall. For example route add check-gateway=ping comment="Netwatch LTE"...
by Ca6ko
Fri Jul 07, 2023 3:41 pm
Forum: Forwarding Protocols
Topic: Help with my GRE tunnel between my home and a VPS
Replies: 1
Views: 1964

Re: Help with my GRE tunnel between my home and a VPS

Could someone help me understand this concept of routes on mikrotik so that my tunnel can work? You didn't ask the question clearly. You have not formulated the problem you are trying to solve with the GRE tunnel. You have a large knowledge gap in the basics of networks, in particular the routing s...
by Ca6ko
Wed Jun 21, 2023 4:20 pm
Forum: General
Topic: How many users limit ?
Replies: 6
Views: 754

Re: How many users limit ?

What is the maximum number of active users?
The DHCP server does not work with users, it works with leases.
In ROS, it is limited only by the number of IP addresses that you set in the DHCP pool. And the capabilities of the device.
by Ca6ko
Mon Jun 19, 2023 1:20 pm
Forum: Wireless Networking
Topic: Roaming in Station Mode - set signal threshold?
Replies: 10
Views: 3142

Re: Roaming in Station Mode - set signal threshold?

its not roaming You put some kind of meaning in the concept of wifi roaming. From the station's point of view, it is roaming. If the station is roaming disabled, then the station will be connected to one access point and will not look for another access point until the connection is broken, only th...
by Ca6ko
Thu Jun 15, 2023 7:20 pm
Forum: Wireless Networking
Topic: Roaming in Station Mode - set signal threshold?
Replies: 10
Views: 3142

Re: Roaming in Station Mode - set signal threshold?

Connection List is useless... As you described the problem is solved exactly with the Connect list. The principle of the Wifi station holds on to the access point until the signal drops to -68. At this signal the station begins to look for an access point with better parameters if there is one it s...
by Ca6ko
Wed Jun 14, 2023 11:05 pm
Forum: Wireless Networking
Topic: Persistent Wi-Fi Disconnection Issues with Mikrotik ax2
Replies: 62
Views: 15385

Re: Persistent Wi-Fi Disconnection Issues with Mikrotik ax2

Thanks for the tip that rc 6 does not fix the problem. Tomorrow I plan to try a downgrade to 7.8
viewtopic.php?t=196170
by Ca6ko
Wed Jun 14, 2023 10:51 pm
Forum: Wireless Networking
Topic: Roaming in Station Mode - set signal threshold?
Replies: 10
Views: 3142

Re: Roaming in Station Mode - set signal threshold?

I expect someone from MikroTik will answer my question here. This is a technical forum where ordinary people write in their spare time. No one is obliged to answer you on the forums. +I think I described my problem very well. It's a simple question, even yes/no would help. I also think I have answe...
by Ca6ko
Wed Jun 14, 2023 9:51 am
Forum: Wireless Networking
Topic: ax series lineup WiFi issues
Replies: 344
Views: 133719

Re: ax series lineup WiFi issues

AX2 7.9.2/7.10.rc5 clients can not connect to the wifi. There are Handshake errors in the logs. Configuration features included WPA2/WPA3 have virtual interfaces. /interface wifiwave2 channel add band=2ghz-ax disabled=no frequency=2412 name=channel1 width=20mhz add band=2ghz-ax disabled=no frequency...
by Ca6ko
Tue Jun 13, 2023 4:23 pm
Forum: RouterBOARD hardware
Topic: GPS in Mikrotik
Replies: 41
Views: 6172

Re: GPS in Mikrotik

huawei_me909u_521_lte_lga_module_application_guide_english.pdf
12.GPS appliation scenarios
by Ca6ko
Tue Jun 13, 2023 2:27 pm
Forum: General
Topic: MUM plans for 2023?
Replies: 52
Views: 9358

Re: MUM plans for 2023?

maybe is time for Users to Make their own independent MUMs
In Moscow they are already conducting...
by Ca6ko
Tue Jun 13, 2023 9:30 am
Forum: General
Topic: RoMon
Replies: 10
Views: 899

Re: RoMon

1. Enable/check all ports for ROMON
2. disable secrets on all devices for the test and check availability.
3. Check if the devices are visible through the IP neighbors.
by Ca6ko
Mon Jun 12, 2023 5:35 pm
Forum: Beginner Basics
Topic: Same segment IPs on different LAN ports.
Replies: 27
Views: 1788

Re: Same segment IPs on different LAN ports.

I have an hEX mikrotik routerboard що WAN працює на ether2***, а не на SFP(+) чи іншому гігабітному порту, коли маршрутизатор має змішані порти 100/1G (наприклад, rb2011). What does that have to do with it? The @villegas hex has all 1Gb ports. The reason why he cannot use the bandwidth of the wan p...
by Ca6ko
Mon Jun 12, 2023 5:13 pm
Forum: Wireless Networking
Topic: hAP ac2 - Dual Repeater with Private Network
Replies: 2
Views: 1219

Re: hAP ac2 - Dual Repeater with Private Network

I can wirelessly connect the hAP to 3rd party APs via wlan1/Station. I can connect my devices wirelessly to the hAP wlan2/AP. Both LAN and wlan2/AP give me IP addresses and I can ping the router but not the internet.
For such a case, you need to add wlan1 to the WAN interface list
by Ca6ko
Mon Jun 12, 2023 1:48 pm
Forum: Beginner Basics
Topic: Same segment IPs on different LAN ports.
Replies: 27
Views: 1788

Re: Same segment IPs on different LAN ports.

Draw a network diagram, specify the equipment and point out where the bottleneck, we will suggest solutions.
I haven't seen such a variant of channel aggregation yet ... :shock:
1 link isn't enough to use all the bandwith we have,
So you need to change the switch
by Ca6ko
Thu Jun 08, 2023 3:08 pm
Forum: RouterBOARD hardware
Topic: USB -> RJ45 for PoE? Or will MT start putting USB-C ports?
Replies: 23
Views: 4173

Re: USB -> RJ45 for PoE? Or will MT start putting USB-C ports?

OP asked about USB-C "A device with a Type-C connector does not necessarily implement USB, USB Power Delivery, or any Alternate Mode: the Type-C connector is common to several technologies while mandating only a few of them." https://en.wikipedia.org/wiki/USB-C Many people are mistaken ab...
by Ca6ko
Thu Jun 08, 2023 1:10 pm
Forum: RouterBOARD hardware
Topic: USB -> RJ45 for PoE? Or will MT start putting USB-C ports?
Replies: 23
Views: 4173

Re: USB -> RJ45 for PoE? Or will MT start putting USB-C ports?

Familiarize yourself with the power capabilities of USB. The regular USB2.0 output guarantees a current of 500mA which provides 2.5 watts of power. The USB3.0 guarantees 900 mA which provides 4.5 watts of power. Standard USB3.2 output power of 7.5W. The higher wattage is only provided by devices tha...
by Ca6ko
Tue Jun 06, 2023 9:12 pm
Forum: Wireless Networking
Topic: CAPsMAN v7.x CAPs Radio's stop working
Replies: 16
Views: 2820

Re: CAPsMAN v7.x CAPs Radio's stop working

I'm sorry, I don't quite understand you.
by Ca6ko
Tue Jun 06, 2023 5:29 pm
Forum: Wireless Networking
Topic: CAPsMAN v7.x CAPs Radio's stop working
Replies: 16
Views: 2820

Re: CAPsMAN v7.x CAPs Radio's stop working

You were told to reset to CAP mode. Then there is no need to configure anything at all Reset button The reset button has three functions: Hold this button during boot time until LED light starts flashing, release the button to reset RouterOS configuration (total 5 seconds). Keep holding for 5 more s...
by Ca6ko
Tue Jun 06, 2023 10:36 am
Forum: RouterBOARD hardware
Topic: Which POE switch is better?
Replies: 4
Views: 3155

Re: Which POE switch is better?

I can not make my mind to chose from those two POE swtiched. Which is please better? Which on would you chose? You didn't provide any criteria to choose from. 1. Number of devices, connection ports. 2. required POE standards, characteristics of the equipment to be connected 3. bandwidth requirements.
by Ca6ko
Mon Jun 05, 2023 11:10 am
Forum: RouterBOARD hardware
Topic: SolidRack
Replies: 5
Views: 2876

Re: SolidRack

No, it's RB2011.
by Ca6ko
Mon Jun 05, 2023 11:05 am
Forum: RouterBOARD hardware
Topic: SolidRack
Replies: 5
Views: 2876

Re: SolidRack

Here is my Network Home miniLab. SolidRack 1006
The attachment of the devices to the shelf is magnetic, using a metal plate and magnets from the HDD.
1 photo.jpg
2 photo.jpg
3 photo.jpg
4 photo.jpg
5 photo.jpg
by Ca6ko
Sat Jun 03, 2023 11:31 pm
Forum: RouterBOARD hardware
Topic: Question about RB5009 rack options
Replies: 7
Views: 3038

Re: Question about RB5009 rack options

You can use the half from the RMK-2/10 kit and the half from the RB5009/L009 rackmount kit K-79. With a little bit of modification. Then you can use any 200mm form factor switch
by Ca6ko
Fri May 12, 2023 12:32 pm
Forum: Wireless Networking
Topic: RB433replacement
Replies: 3
Views: 1121

Re: RB433replacement

I miss the RB433's You'll get about the same on the RBM33G. I assume we are talking about the retransmitter in an inaccessible place? But I would suggest getting two ready-made devices with built-in antennas, like the LHG XL. Due to the high gain of the antennas you can reduce the output power of t...
by Ca6ko
Fri May 12, 2023 12:11 pm
Forum: RouterBOARD hardware
Topic: SolidRack
Replies: 5
Views: 2876

SolidRack

Mikrotik makes the SolidRack 10. But such a rack is not always suitable for small installations. I suggest to rename SolidRack 10 to SolidRack 1910 (19" 10U) and release a small version of SolidRack 1006 (10" 6U). Possible variants are 1010, 1008
I made myself one of these 1006.
by Ca6ko
Thu May 11, 2023 9:00 am
Forum: Wireless Networking
Topic: USB WiFi adapter?
Replies: 11
Views: 2863

Re: USB WiFi adapter?

When set on ap, the master has to be set manually towards the correct frequency or the slave-station will not connect.
Right ?
Yes
by Ca6ko
Thu May 11, 2023 8:41 am
Forum: Wireless Networking
Topic: USB WiFi adapter?
Replies: 11
Views: 2863

Re: USB WiFi adapter?

I have it working on a virtual
by Ca6ko
Thu May 11, 2023 8:28 am
Forum: Wireless Networking
Topic: USB WiFi adapter?
Replies: 11
Views: 2863

Re: USB WiFi adapter?

Since the interfaces will work in turns, don't forget to increase the buffers of the interfaces to the required size. I would change the assignment of the interfaces to wlan access point mode on the physical interface wlan1, station mode on the virtual interface wlan3. This is assuming that the upli...
by Ca6ko
Mon May 08, 2023 8:47 am
Forum: Wireless Networking
Topic: Roaming in Station Mode - set signal threshold?
Replies: 10
Views: 3142

Re: Roaming in Station Mode - set signal threshold?

You probably phrased your question poorly, since no one wants to answer you.
Look in the direction of the connection list
I don't think changing the signal level will help you much. The problem lies on another plane.
by Ca6ko
Sun May 07, 2023 1:45 pm
Forum: RouterBOARD hardware
Topic: Single RB5009 rack mount options?
Replies: 8
Views: 2862

Re: Single RB5009 rack mount options?

Take a close look at the capabilities of the K-79
https://i.mt.lv/cdn/product_files/RB500 ... 210741.pdf
by Ca6ko
Sun May 07, 2023 12:55 pm
Forum: Beginner Basics
Topic: starlink and static routes
Replies: 5
Views: 6763

Re: starlink and static routes

You do not need to add a route separately. Just set the port of the mikrotik to which the Starlink is connected to an additional IP address from the network 192.168.100.0.0/24 any other than .1, the route will be created automatically.
by Ca6ko
Sat May 06, 2023 12:40 am
Forum: General
Topic: Problems with printer on lan
Replies: 13
Views: 1847

Re: Problems with printer on lan

Now, if one of these notebooks is changed to a Static IP within the 192.168.0.xxx range, everything works fine. . on a notebook via wifi that has dhcp range I put static ip in the range 192.168.0.x and I could print perfectly. To rule out a wifi problem. On a computer with a cable connected, set st...
by Ca6ko
Fri May 05, 2023 11:04 am
Forum: General
Topic: Problems with printer on lan
Replies: 13
Views: 1847

Re: Problems with printer on lan

Unifi transparent bridge mode enabled?
Try on a computer with a static IP address to change it to an address from the DHCP pool. If it works, the problem is with Unifi if not, the problem is with the printer.
by Ca6ko
Fri May 05, 2023 10:47 am
Forum: Beginner Basics
Topic: Wireless Link on AM
Replies: 5
Views: 591

Re: Wireless Link on AM

the shunt fed AM still radiates 5kw
Then use Mikrotik devices with a metal case QRT 5 ac or NetMetal ac² + mANT30 + Sleeve30.
.
the thick cable is shielded and grounded every 10 feet.
What prevents you from doing the same with twisted pair?
by Ca6ko
Thu May 04, 2023 11:18 pm
Forum: Beginner Basics
Topic: Wireless Link on AM
Replies: 5
Views: 591

Re: Wireless Link on AM

need a radio that takes an antenna and can do so with 200-250 feet of shielded coax. The idea is utopian. What is the attenuation of your cable at 5GHz? Theoretically you could try GrooveA 52 ac/Metal 52 ac with the mANT30 antenna. But I think the cable attenuation will negate the results. But you ...
by Ca6ko
Thu May 04, 2023 10:52 pm
Forum: Beginner Basics
Topic: Endpoint-Independent NAT when applying Hairpin NAT
Replies: 16
Views: 2231

Re: Endpoint-Independent NAT when applying Hairpin NAT

Techsystem wrote Wed Apr 26, 2023 7:35 pm give an advise or explaination about how can i config this ... /ip firewall nat add action=src-nat chain=srcnat comment="defconf: masquerade" out-interface-list=WAN to-addresses=192.168.2.2 . Ca6ko wrote Fri Apr 28, 2023 10:40 am For mikrotik you ...
by Ca6ko
Thu May 04, 2023 10:04 am
Forum: Beginner Basics
Topic: Endpoint-Independent NAT when applying Hairpin NAT
Replies: 16
Views: 2231

Re: Endpoint-Independent NAT when applying Hairpin NAT

Show the mikrotik configuration after applying my recommendations
viewtopic.php?p=999909#p999769
by Ca6ko
Thu May 04, 2023 9:23 am
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 1023
Views: 1143418

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

It seems this is only applicable for UDP streams, not for TCP.
by Ca6ko
Thu May 04, 2023 8:56 am
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 1023
Views: 1143418

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

There is a small undocumented specifics of using the btest program
Note how the maximum traffic generation capacity of the device's processor is determined
Screenshot_6.jpg
Screenshot_5.jpg
by Ca6ko
Wed May 03, 2023 7:47 pm
Forum: General
Topic: Public-Mikrotik-Bandwidth-Test-Server(s)
Replies: 1023
Views: 1143418

Re: Public-Mikrotik-Bandwidth-Test-Server(s)

My public IP address is 2XX.XX.XX.XX.
Your ISP probably has a problem
by Ca6ko
Wed May 03, 2023 7:37 pm
Forum: Forwarding Protocols
Topic: Ping packet loss
Replies: 1
Views: 1902

Re: Ping packet loss

by Ca6ko
Wed May 03, 2023 3:22 pm
Forum: Beginner Basics
Topic: Endpoint-Independent NAT when applying Hairpin NAT
Replies: 16
Views: 2231

Re: Endpoint-Independent NAT when applying Hairpin NAT

You don't have a public address on the mikrotik so it has nothing to do with it. You have an Asus for Hairpin NAT. You don't understand the situation correctly and are therefore looking for the wrong solutions. Mikrotik's Hairpin NAT settings will allow you to access its external address 192.168.2....
by Ca6ko
Wed May 03, 2023 9:36 am
Forum: General
Topic: Can I avoid IP range overlap?
Replies: 4
Views: 622

Re: Can I avoid IP range overlap?

You can't change the network on the LTE modem, but you can on the router A. I recommend setting the low-use band to .200-250
such as 192.168.235.0/24 this will avoid similar problems in the future.
by Ca6ko
Wed May 03, 2023 9:27 am
Forum: Beginner Basics
Topic: Bandwidth test: microtik router vs lan host
Replies: 18
Views: 1585

Re: Bandwidth test: microtik router vs lan host

To be completely sure that the problem is in the ROS configuration, do a UDP test from the computer and router to the public server bandwidth-test
viewtopic.php?t=104266
by Ca6ko
Wed May 03, 2023 9:13 am
Forum: Wireless Networking
Topic: WifiWave2 - questions
Replies: 1
Views: 1079

Re: WifiWave2 - questions

Do builds for arm64 (my CCR2004) contain the CAPSMAN-controller too or only drivers?
contain the CAPSMAN-controller +drivers
can I run CAPSMAN and CAPSMAN-WifiWave2 on the same physical router?
no
can I simply run the cAPax with the "old" CAPSMAN?
no
by Ca6ko
Wed May 03, 2023 8:42 am
Forum: RouterBOARD hardware
Topic: New Hardware SPOILER!!! [RB L009UiGS-2HaxD] [SOLVED]
Replies: 48
Views: 14504

Re: holvoetn [SOLVED]

Hap ax lite has arm32.
L009 has ROS x32
PS
Looks like the L009 has 10" rack mounts or not?
by Ca6ko
Mon May 01, 2023 5:18 pm
Forum: RouterBOARD hardware
Topic: RB4011iGS+5HacQ2HnD-IN Antennas not tight
Replies: 2
Views: 2185

Re: RB4011iGS+5HacQ2HnD-IN Antennas not tight

Lubricate with vegetable oil (I used sunflower oil) after a while the oil will be absorbed into the plastic and the antenna will hold tight.
by Ca6ko
Mon May 01, 2023 5:02 pm
Forum: Beginner Basics
Topic: Endpoint-Independent NAT when applying Hairpin NAT
Replies: 16
Views: 2231

Re: Endpoint-Independent NAT when applying Hairpin NAT

Why do you create several threads with the same problem.https://forum.mikrotik.com/viewtopic.php?t=195707 Your task is to make it as clear as possible to other users to ask a question and then get help. To do this, it is best to draw a network diagram. . yes you can pretend the 192.168.2.2 as the pu...
by Ca6ko
Mon May 01, 2023 3:48 pm
Forum: Beginner Basics
Topic: Bandwidth test: microtik router vs lan host
Replies: 18
Views: 1585

Re: Bandwidth test: microtik router vs lan host

Draw a diagram of the network we are testing. Specify the devices and where the traffic is coming from.
Looks like the maximum speed for wifi
PS Mikrotik has a "btest" program for the computer
by Ca6ko
Fri Apr 28, 2023 10:58 am
Forum: Beginner Basics
Topic: RB2011 can't access between Two DHCP servers [SOLVED]
Replies: 4
Views: 862

Re: RB2011 can't access between Two DHCP servers [SOLVED]

the communication would be to the file server that is on the 192.168.100.1 network,
I still don't understand you.
Draw a network diagram and post the updated config viewtopic.php?p=908118
by Ca6ko
Fri Apr 28, 2023 10:40 am
Forum: Beginner Basics
Topic: Split DNS in Mikrotik to override a delay problem
Replies: 3
Views: 543

Re: Split DNS in Mikrotik to override a delay problem

If you use the serial number connection, the double NAT connection will still be established and everything will work. You don't have a public address on the mikrotik so it has nothing to do with it. You have an Asus for Hairpin NAT. For mikrotik you have to turn on the standard NAT and disable unne...
by Ca6ko
Thu Apr 27, 2023 5:11 pm
Forum: Beginner Basics
Topic: RB2011 can't access between Two DHCP servers [SOLVED]
Replies: 4
Views: 862

Re: RB2011 can't access between Two DHCP servers [SOLVED]

but i can't comunicate between two DHCP servers I don't understand you. What kind of interaction between servers are we talking about? There will be no interaction between the DHCP server clients in your setup because you gave them the actual netmask /8 and they think they are on the same L2 segmen...
by Ca6ko
Thu Apr 27, 2023 4:38 pm
Forum: Beginner Basics
Topic: Split DNS in Mikrotik to override a delay problem
Replies: 3
Views: 543

Re: Split DNS in Mikrotik to override a delay problem

For the Dahua NVR it is better to use the connection by serial number. Enable P2P in the settings. Create a new connection in the program, select connection by QR code or S/N. Scan the code or enter the number manually and everything will work.
by Ca6ko
Thu Apr 27, 2023 4:27 pm
Forum: Wireless Networking
Topic: the best monitoring tool for access points
Replies: 2
Views: 1023

Re: the best monitoring tool for access points

with lots of Mikrotik wireless access points
A lots. How much is that for you?
10...100...1000
by Ca6ko
Thu Apr 27, 2023 9:46 am
Forum: General
Topic: unable to Update Routeros
Replies: 3
Views: 521

Re: unable to Update Routeros

Version 6.47.9 has a bug in it often not enough memory to install a new version of ROS. In this case there is a patch fix-space-6.47-smips which frees memory or use netinstall.
by Ca6ko
Thu Apr 27, 2023 9:28 am
Forum: RouterBOARD hardware
Topic: Hardware compatible with 10 inch rack
Replies: 2
Views: 2095

Re: Hardware compatible with 10 inch rack

Although the name Mikrotik is from the Latvian micro net, in their line of equipment they completely bypass the small 10" racks. So you have to either use shelves or make the mounts yourself.
by Ca6ko
Wed Apr 26, 2023 11:05 am
Forum: Beginner Basics
Topic: Winbox strange access message
Replies: 4
Views: 472

Re: Winbox strange access message

99% The Dude
by Ca6ko
Wed Apr 19, 2023 7:33 pm
Forum: General
Topic: How to block DHCP requests over VPN
Replies: 17
Views: 1271

Re: How to block DHCP requests over VPN

I noticed some clients connected locally to the UDM had gotten a DHCP address from a hAP remotely connected via the Wireguard VPN. When several offices are connected into a single network. The VPN interface is added to the bridge PS If a wrong DHCP server or client appears on one of the router port...
by Ca6ko
Wed Apr 19, 2023 6:55 pm
Forum: General
Topic: How to block DHCP requests over VPN
Replies: 17
Views: 1271

Re: How to block DHCP requests over VPN

VPN
hEX and hAP devices 6 locations, each running DHCP servers on their "bridge" interfaces
I usually in such situations, I block forwarding on bridge udp ports 67-68. Then packets from other DHCP servers are not forwarded through the bridge and everything is stable.
by Ca6ko
Tue Apr 18, 2023 10:25 pm
Forum: General
Topic: Recover Device
Replies: 4
Views: 758

Re: Recover Device

Full formatting in this case can last 5-10 minutes. It seems that the device was rebooted without waiting for the formatting to complete. Try resetting, booting from the main bootloader, booting from the backup bootloader again. https://wiki.mikrotik.com/wiki/Manual:RouterBOARD_settings#Protected_bo...
by Ca6ko
Tue Apr 18, 2023 12:26 pm
Forum: Wireless Networking
Topic: 802.11r for hAP ac2?
Replies: 75
Views: 14723

Re: 802.11r for hAP ac2?

See what the new wifi driver is called. The 802.11ac Wave 2 standard came out in 2015. "How you name the yacht that's how it will sail." :D /Captain Vrungel/ I would call the new driver WifiAX, which makes sense, and cut the WifiWave2 version down leaving only the ac device drivers in it. ...
by Ca6ko
Tue Apr 18, 2023 12:15 pm
Forum: Wireless Networking
Topic: Getting half of my Internet speed on Wifi
Replies: 20
Views: 6566

Re: Getting half of my Internet speed on Wifi

I thought they would serve me a bit They will certainly serve you for 10 years. Only the wifi speed on microtik devices remains at the level of 2013. The wifi driver for ROS v6 will not change, so everything will work as it works, qualitatively stable not fast. For 95-98% of scenarios of use this s...
by Ca6ko
Sun Apr 16, 2023 10:03 pm
Forum: General
Topic: DHCP static and dynamic, two pools (hAP ax3) [SOLVED]
Replies: 3
Views: 679

Re: DHCP static and dynamic, two pools (hAP ax3) [SOLVED]

What's the problem?
Set one server DHCP one pool.
For static clients you can manually set any parameters, only the automatic ones use DHCP settings.
Configure the DHCP on a subnet: 10.0.0.0/24.
static leases on a subnet: 192.168.1.0/24
Everything will work.
by Ca6ko
Sun Apr 16, 2023 9:54 pm
Forum: The Dude
Topic: Dude, add a national font.
Replies: 3
Views: 2830

Re: Dude, add a national font.

Why are you surprised? 4.0 is the limit of development Dude. All subsequent versions have only limitations in functionality. If you look globally, the only changes were in the way of authorization. There were no changes in functionality. If you look at the reality dude 4.0 is no different from dude ...
by Ca6ko
Fri Apr 14, 2023 3:58 pm
Forum: Beginner Basics
Topic: I can't login into just bought routers rb4011
Replies: 3
Views: 2938

Re: I can't login into just bought routers rb4011

Read carefully the sticker on the device. There you will learn the parameters for logging in.
by Ca6ko
Thu Apr 13, 2023 3:11 pm
Forum: The Dude
Topic: Dude, add a national font.
Replies: 3
Views: 2830

Dude, add a national font.

I'll write here, so as not to forget. I needed Cyrillic. To get the national font on the Dude map you need to add it to Dude. To do this, copy to the device where you run the server Dude necessary font with the extension .ttf, in the folder dude/files. After that, this font can be selected in the se...
by Ca6ko
Thu Apr 13, 2023 11:58 am
Forum: The Dude
Topic: Update Dude to 7.8 base not available
Replies: 1
Views: 2175

Update Dude to 7.8 base not available

I have dude set up on ac2 and the data is stored on a usb flash drive. After upgrading from 7.7 to 7.8 Dude will not start. Analysis showed that the status said no database file was found. The data path looks like disk1/dude. I try to open the files, but the folder is empty. I look at the usb device...
by Ca6ko
Wed Apr 12, 2023 7:22 pm
Forum: Wireless Networking
Topic: Omnitik 5AC
Replies: 8
Views: 1416

Re: Omnitik 5AC

I did not know that Ubiquiti LiteBeam 5AC LBE-5AC-23 does not disable AirMAX.
by Ca6ko
Wed Apr 12, 2023 1:41 pm
Forum: General
Topic: Blink command, how to use?
Replies: 0
Views: 546

Blink command, how to use?

Good afternoon colleagues! Please tell me how to use the blink command. Several times tried to use. then tried experimenting in the lab, got no results. There is a very modest description in the documentation. blink ([id, name]) Blink Ethernet leds. When running the command both from winbox and via ...
by Ca6ko
Wed Apr 12, 2023 10:26 am
Forum: General
Topic: Best Practice for VLANs or Subnets
Replies: 29
Views: 3102

Re: Best Practice for VLANs or Subnets

Does that imply you will use 192.168.230.0/24 for Oct 23? yes and not configure anything in Nov or Dec? 231 and 232 I don't set up new networks every month. Sometimes I deviate from the rule if I have to configure two networks in the same month, or November December. I choose months in which there ...
by Ca6ko
Wed Apr 12, 2023 10:21 am
Forum: General
Topic: Best Practice for VLANs or Subnets
Replies: 29
Views: 3102

Re: Best Practice for VLANs or Subnets

Splitting the networks will improve the situation a bit, but will not solve the problem of intermittent loss of access to the Internet. This is a problem you will have to investigate further when you are at home. Here are a few reasons why this can happen. 1. Insufficient wifi coverage or the load c...
by Ca6ko
Wed Apr 12, 2023 9:48 am
Forum: General
Topic: Best Practice for VLANs or Subnets
Replies: 29
Views: 3102

Re: Best Practice for VLANs or Subnets

Now I know what my first order of business is when I get home. I haven't had a problem crossing networks in a long time. I have developed a simple rule for myself in April 23 the network I configure will have addresses 192.168.234.0/24 in May 192.168.235.0/24, etc. Thanks to this, the IPs of the ma...
by Ca6ko
Wed Apr 12, 2023 8:54 am
Forum: Wireless Networking
Topic: Omnitik 5AC
Replies: 8
Views: 1416

Re: Omnitik 5AC

There may be several problems, there is not enough information to determine which one it is. 1. There may be dfs signal detection 2. Could be interference from another station 3. Maybe one user is occupying the entire internet channel. and a few more. Create a detailed description Right now I can sa...
by Ca6ko
Wed Apr 12, 2023 8:17 am
Forum: Beginner Basics
Topic: Scripting second base
Replies: 8
Views: 692

Re: Scripting second base

You want help and want forum users to guess the right answer for you. Setting up two access points next to each other requires 3 times the wifi knowledge. We do not know your qualifications. So give us all the information you have. Draw a diagram, describe what you have done and what is not working....
by Ca6ko
Sun Apr 09, 2023 11:30 pm
Forum: General
Topic: Best Practice for VLANs or Subnets
Replies: 29
Views: 3102

Re: Best Practice for VLANs or Subnets

I don't think you need to learn/configure the Vlan. Putting the radio bridges on a separate network will reduce some unnecessary traffic over the radio. It will also ease the work of the CPE themselves. Access to the devices will be by IP. Is there a way to have the Wi-Fi links on a separate subnet ...
by Ca6ko
Sat Apr 08, 2023 12:12 pm
Forum: General
Topic: Best Practice for VLANs or Subnets
Replies: 29
Views: 3102

Re: Best Practice for VLANs or Subnets

You just need to add a rule allowing access through winbox to ac2 and ac3 /ip firewall filter add action=accept chain=input in-interface=ether1 protocol=tcp dst-port=8291 ps It is also better to assign a separate subnet for radio bridges On AX3 exclude the ether2 port from the bridge. Assign to it a...
by Ca6ko
Sat Apr 08, 2023 9:08 am
Forum: General
Topic: Need 10 Gig Suggestions
Replies: 7
Views: 654

Re: Need 10 Gig Suggestions

I am saving up to upgrade, if the 312 wouldn't meet my needs what would that is like it? I don't understand you, do you need a router or a switch router CCR2004-1G-12S+2XS -- $595 switch CRS312-4C+8XG-RM --$699 Hence why I am confused. So does the 312 not work as a router? Why does it not work as a...
by Ca6ko
Fri Apr 07, 2023 8:10 pm
Forum: General
Topic: CRS 354-48g-4s+2q+rm as a core router in a company
Replies: 6
Views: 713

Re: CRS 354-48g-4s+2q+rm as a core router in a company

i mean what Router can do and switch can not and visa versa..? As a switch it can "total non-blocking throughput is 168 Gbps, switching capacity is 336 Gbps" As a router it can "the forwarding rate reaches 235 Mpps" As you have already been told, if you are satisfied with the sp...
by Ca6ko
Fri Apr 07, 2023 7:58 pm
Forum: General
Topic: Need 10 Gig Suggestions
Replies: 7
Views: 654

Re: Need 10 Gig Suggestions

I am in the lookout for a CR312 then!
Using a switch as a router is not a good idea
by Ca6ko
Fri Apr 07, 2023 3:40 pm
Forum: General
Topic: CRS 354-48g-4s+2q+rm as a core router in a company
Replies: 6
Views: 713

Re: CRS 354-48g-4s+2q+rm as a core router in a company

This device is called a switch, with a ROS installed.
As a router its capabilities are very modest at the level of HAP or HAP ac lite
by Ca6ko
Fri Apr 07, 2023 3:30 pm
Forum: General
Topic: LHGG Login issue
Replies: 3
Views: 317

Re: LHGG Login issue

So you are blocking access to the device when setting up
by Ca6ko
Fri Apr 07, 2023 2:59 pm
Forum: General
Topic: Is it possible on Mikrotik routers to have a network topology like this?
Replies: 9
Views: 1441

Re: Is it possible on Mikrotik routers to have a network topology like this?

I'm talking about the addresses under 'IP->Addresses' - the lists in there where you specify the networks, their masks and interfaces. This is where you are slightly mistaken. In the IP/Address menu, you specify the IP ADDRESSes that are assigned to this device. And the device tells the other devic...
by Ca6ko
Fri Apr 07, 2023 9:58 am
Forum: General
Topic: LHGG Login issue
Replies: 3
Views: 317

Re: LHGG Login issue

Connect to winbox by MAC
by Ca6ko
Fri Apr 07, 2023 9:56 am
Forum: Beginner Basics
Topic: Can't connect to internet via wifi when 10G file-share line is connected [SOLVED]
Replies: 4
Views: 680

Re: Can't connect to internet via wifi when 10G file-share line is connected [SOLVED]

when I connect to the wifi and then connect via ethernet to the CRS312, everything locks up. I can't get online, nor can I connect to another terminal. I can, however, go online when I disconnect the cable; I can connect to a LAN terminal when I turn off wifi. So, I've goofed something, likely in m...
by Ca6ko
Fri Apr 07, 2023 9:45 am
Forum: The Dude
Topic: The Dude - SNMP particular issue
Replies: 7
Views: 3120

Re: The Dude - SNMP particular issue

1.Try to downgrade the SNMP version to v1 for these two servers.
2.Try using another device with ROS as the agent dude.
3. Try creating a new dude base and add only these two servers to it.
Or give more details.
by Ca6ko
Thu Apr 06, 2023 11:22 pm
Forum: General
Topic: Is it possible on Mikrotik routers to have a network topology like this?
Replies: 9
Views: 1441

Re: Is it possible on Mikrotik routers to have a network topology like this?

You need to learn the basics of networks and routing . . Understood, so the routers aren't sharing addresses and each will have unique address lists. I don't understand what address lists we're talking about? Routers operate with routes. It's easier for you to hire a specialist. . Makes me wonder h...
by Ca6ko
Thu Apr 06, 2023 9:55 am
Forum: Wireless Networking
Topic: 2 gig to 10 gig wireless link for short distances (50 meters) between buildings
Replies: 9
Views: 1839

Re: 2 gig to 10 gig wireless link for short distances (50 meters) between buildings

Wireless connections at these speeds will come out very expensive.
It is cheaper, more reliable, more convenient, more practical to lay an optical cable.
by Ca6ko
Wed Apr 05, 2023 6:01 pm
Forum: General
Topic: Is it possible on Mikrotik routers to have a network topology like this?
Replies: 9
Views: 1441

Re: Is it possible on Mikrotik routers to have a network topology like this?

Of course it is possible to do this on Mikrotik devices You need to learn the basics of networks and routing. Since network isolation is out of the question, we are not considering VLAN Now to be able to give advice on the diagrams there are no gateway addresses. That is, the network is characterize...
by Ca6ko
Wed Apr 05, 2023 10:10 am
Forum: Wireless Networking
Topic: DISTANCE IN SECTION ADVANCED
Replies: 12
Views: 1800

Re: DISTANCE IN SECTION ADVANCED

What devices do you build your Radio Bridge on? If you don't know anything about wifi, just leave it as it is. There is too little information to be able to give advice. The quick setup menu can only be used once, after that it is not recommended to change the settings through it. More informative t...
by Ca6ko
Tue Apr 04, 2023 10:32 pm
Forum: Wireless Networking
Topic: HAP AC3 Super Channel WiFiWave2 Not working
Replies: 7
Views: 1838

Re: HAP AC3 Super Channel WiFiWave2 Not working

Mikrotik has older devices that support a wider range of frequencies
[admin@2011] /interface/wireless/info> hw
interface: wlan1
ranges: 2312-2732/5/b,g,gn20,gn40
2484-2484/5/b,g,gn20,gn40
tx-chains: 0,1
rx-chains: 0,1
extra-info: pciinfo:0x0, cid:0, gain:4
by Ca6ko
Tue Apr 04, 2023 10:19 pm
Forum: Wireless Networking
Topic: HAP AC3 Super Channel WiFiWave2 Not working
Replies: 7
Views: 1838

Re: HAP AC3 Super Channel WiFiWave2 Not working

I want to set it to 2.3~ superchannel frequencies Your device does not support these frequencies only 2.4GHz /interface/wireless/info> hw-info interface: wlan1 ranges: 2412-2482/5/b,g,gn20,gn40 2484-2484/5/b,g,gn20,gn40 tx-chains: 0,1 rx-chains: 0,1 extra-info: pciinfo:0x0, cid:0, gain:3
by Ca6ko
Tue Apr 04, 2023 4:05 pm
Forum: Wireless Networking
Topic: DISTANCE IN SECTION ADVANCED
Replies: 12
Views: 1800

Re: DISTANCE IN SECTION ADVANCED

For distances up to 1 km it is better to use Indoors.
When setting up the radio bridge, the power is set according to the level of the received signal. The optimum is 50-55 dB. you should strive to get the same Tx/Rx values and the same in channels ch1 ch0
by Ca6ko
Tue Apr 04, 2023 3:48 pm
Forum: RouterBOARD hardware
Topic: rb4011 and cable check
Replies: 2
Views: 1360

Re: rb4011 and cable check

The cable tester only works with the cable disconnected.
If the link works, the cable cannot be tested. Only with a special tester. Check whether the auto-negotiation or manual is set.
Do not forget to turn on the safe mode when working remotely.
by Ca6ko
Mon Apr 03, 2023 9:24 am
Forum: Beginner Basics
Topic: wifi station setup on hap ac2 - certain sites cannot be reached [SOLVED]
Replies: 10
Views: 830

Re: wifi station setup on hap ac2 - certain sites cannot be reached [SOLVED]

In the diagram and instructions you showed, the settings are made on the device without configuration. You are configuring on a device that has a default config and then also your modification. For wlan1 to work correctly as a wan port on the default config it needs to be added to the wan interface ...
by Ca6ko
Mon Apr 03, 2023 8:36 am
Forum: Wireless Networking
Topic: station modes are not working
Replies: 3
Views: 1238

Re: station modes are not working

Can someone help ?
Yes, only you can do that.
With our help
viewtopic.php?p=908118
  • 1
  • 2