I have the same problem. I once used a netinstall a few months ago and after flashing a different version of RouterOS, it left this flash folder (disk) and I can't remove it. It takes up all the space - 16MB and I can't install new certificates due to lack of space. Normally the root of storage, as...

I have the same problem. I once used a netinstall a few months ago and after flashing a different version of RouterOS, it left this flash folder (disk) and I can't remove it. It takes up all the space - 16MB and I can't install new certificates due to lack of space. ...system,error,critical could no...

I had the same problem. I was using CF DoH server.
Imported "DigiCertGlobalRootG2.crt.pem" cert and it started working again.

Similar problem. Getting 'connect failed' error message for lte interface. It started suddenly around 20 hours after installing latest firmware 7.12beta3 version. I have tried: Full reset Power off/on via power cable. Switching APN profiles, some of them showed "service not activated", whi...

LV operators (and probably not just LV) lately turning off high bands during nights to save electricity. Meantime, if you have lots of active devices: specifically IoT (e.g. cheap Chinese CCTV) which keeps constant connection to some sort of cloud services to push notification to your phone etc, th...

Same issue, 3 UK here, new firmware RG502QEAAAR13A02M4G 5G no longer found. Raised a support ticket with Mikrotik, I need a DFOTA to downgrade, or I take the Chateau apart and find a usb to m2 adapter. Same issue here, PL here! I just bought my Chateau 5G with qupanel 5G mimo 4x4.In the instruction...

The device only supports DC jack power.
For tough to place locations, I suggest DC cable extender like this https://www.aliexpress.com/item/4000958018795.html

Thanks. That's a good idea.

Can't find any information about PoE support for Chateau 5G* modem (RBD53G-5HacD2HnD-TC&RG502Q-EA). I assume it doesn't accept just one ethernet cable as a power source (no mention of PoE-out or PoE at all) so the power and data needs to be split into separate connectors. Also it shows 'bad comm...

your pc 192.168.8.x -> Router NAT -> LMT NAT 10.x.x.x -> Collective Public IP "random" in 212.3.x.x pool For open ports, you must ask your provider first to do that on his NAT, out of your control, and later you must open ports on your NAT, under your control. Thanks, that makes a lot mor...

I had tried previously with lte1 as external, ether1 as external, bridge as internal and it still didn't work. My OP is a recent setup after I did a reset. Obviously I had tried many combinations with no success before posting here. Here I tried that setup again and another one with just lte1 and br...

I have a MikroTik Chateau 5G modem (RouterOS v7.3beta37 (testing)) and many p2p applications require open ports. Previously, this was achieved through UPnP and I had no issues, but since I have MT modem now, UPnP seems to be disabled by default, so I enabled it and set up the required interfaces as ...