Community discussions

MUM Europe 2020

Search found 7 matches

by vpnsadmin
Wed Aug 31, 2005 2:17 pm
Forum: General
Topic: HELP!!!!!! on ethernet interface
Replies: 2
Views: 826

I take it you have used the "setup" method for configuring the Hotspot and that you have therefore not setup any routing or firewall rules of your own?

Try adding a static route to the internet gateway, on ether1.
by vpnsadmin
Wed Aug 31, 2005 1:56 pm
Forum: General
Topic: 2.9
Replies: 18
Views: 3679

So far the released 2.9 seems to be running fine.

Apart from the less-than-perfect upgrade procedure, the new improvements are weel worth the upgrade.

Thanks
by vpnsadmin
Wed Jun 01, 2005 11:02 pm
Forum: General
Topic: 5Ghz or 2.4Ghz solution
Replies: 9
Views: 1857

The answer to your questions really depends on a number of isues, such as number of clients you want to support, maximum distance between AP and clients, power source, your budget to name some of the important considerations.. To start this discussion going I propose the following general config as ...
by vpnsadmin
Mon May 30, 2005 5:51 pm
Forum: General
Topic: MT with two bridges eoip wireless networks
Replies: 2
Views: 744

give a few seconds for the router to update..then:-

I can ping from Site1 to Site2
I can ping from Site2 to Site1
I can ping from Site2 to Site3
I can ping from Site3 to Site2

I cannot ping from Site1 to Site3
I can ping from Site3 to Site1

..must be routing issue?
by vpnsadmin
Mon May 30, 2005 4:20 pm
Forum: General
Topic: MT with two bridges eoip wireless networks
Replies: 2
Views: 744

MT with two bridges eoip wireless networks

..it is possible to have two eiop wireless networks on a single router. The following setup:- site 1 site 2 site 3 MT wlan1 --(PP using EoIP)--- MT wlan1 MT wlan2 ---(PP using EoIP)--- MT wlan1 Site1 - ether1= 10.0.0.1 Site1 - wlan1 = 192.168.1.1 Site2 - ether1= 10.0.0.10 Site2 - wlan1 = 192.168.1.2...
by vpnsadmin
Sat May 28, 2005 5:07 pm
Forum: General
Topic: AP with Bridge
Replies: 3
Views: 1021

I am still a bit confused about the viability of running an AP and bridge on the same routerboard.. What are the recommendations on this issue? Should I opt for an external AP connected via ethernet or is the second wireless a good/solid alternative? I expect that we shouldn't have more than about 4...
by vpnsadmin
Fri May 27, 2005 9:36 pm
Forum: General
Topic: AP with Bridge
Replies: 3
Views: 1021

AP with Bridge

Hello, I have setup a bridge between two buildings using the EoIP feature as documented in the help files. I now need to setup an AP in one of the buildings to allow laptop users to connect. I have added a second Atheros minipci wireless card to the MT config.. i.e wlan1 = bridge to second building,...