Community discussions

MikroTik App

Search found 31 matches

by adlar
Mon May 27, 2024 8:28 am
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Re: Feature request:remove limit about "press of the reset button, or a cold reboot"

I got it! For those vps providers who don't provide reset,power off,rescue mode functions, the only way to activate container mode is adding container module and correct rosmode.msg to Router CHR image before running dd to install routeros onto the vps. 1,Prerequisites:I have a vps which is already ...
by adlar
Mon May 27, 2024 5:41 am
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Re: Feature request:remove limit about "press of the reset button, or a cold reboot"

If you can find another device and some recovery console, the rosmode.msg file transfer trick might work (works for me): https://forum.mikrotik.com/viewtopic.php?t=206877#p1072366 Also, I'd agree upon: Enabling container mode by default (this is the single module that is restricted by default which...
by adlar
Sun May 26, 2024 4:31 pm
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Re: Feature request:remove limit about "press of the reset button, or a cold reboot"

Try this on your own risk: Create ROS backup and download it locally if will be needed to create VM instance to recover Setup Winbox access to CHR (can be temporary direct over WAN for this tryout), it's mandatory, below noted why Add this script which creates static DNS records in loop: /system/sc...
by adlar
Sat May 25, 2024 6:40 pm
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Re: Feature request:remove limit about "press of the reset button, or a cold reboot"

You can always restart a VM and Guest OS via its control portal, I would think ? Should have the same effect as a reboot. Works like that in Azure, Virtualbox, VMWare, ... Restart does not work for “reset or cold reboot” on some vps providers.When “reset”,”hard reset”,”power off” are absent,there i...
by adlar
Sat May 25, 2024 2:15 am
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Re: Feature request:remove limit about "press of the reset button, or a cold reboot"

Could Mikrotik remove this limit for CHR version at least?
by adlar
Sat May 25, 2024 2:03 am
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Re: Feature request:remove limit about "press of the reset button, or a cold reboot"

This limit is here for security reasons, it makes harder to make some changes remotely. As such it's generally "a good thing" and I don't want to see it gone. I don't know if MT will hear you for container support (installing a random container can be a security issue as well). Besides, I...
by adlar
Fri May 24, 2024 7:58 am
Forum: General
Topic: Feature request:remove limit about "press of the reset button, or a cold reboot"
Replies: 14
Views: 1017

Feature request:remove limit about "press of the reset button, or a cold reboot"

Hello, I need to install CHR on vps. Some vps provider do not provide hard reset or power off functions so that I find noway to enable container device mode. Could Mikrotik remove the limit about "press of the reset button, or a cold reboot"? I posted a topic about this in 2022,but there i...
by adlar
Fri Dec 22, 2023 8:21 am
Forum: Containers
Topic: run flag in container
Replies: 8
Views: 5190

Re: run flag in container

Wish Mikrotik offered built-in support of the xRay [https://github.com/XTLS/] too.
by adlar
Sun Apr 02, 2023 10:42 am
Forum: Containers
Topic: Struggling with enable device mode and pull image
Replies: 2
Views: 3296

Re: Struggling with enable device mode and pull image

Are my questions too naive to answer?
Have to hard reset to enable container device mode is rediculous on a remote vps. Does Mikrotik have any plan to remove this rule?
by adlar
Sun Mar 05, 2023 7:01 am
Forum: Containers
Topic: Struggling with enable device mode and pull image
Replies: 2
Views: 3296

Struggling with enable device mode and pull image

Hello, I met two problems. 1,I need to install CHR on vps. Some vps provider do not provide hard reset or power off functions so that I find noway to enable container device mode. Could Mikrotik remove the limit about "press of the reset button, or a cold reboot"? 2,The newest version dock...
by adlar
Sat Dec 17, 2022 11:40 pm
Forum: RouterOS beta
Topic: About vrf in the changelog
Replies: 2
Views: 2519

About vrf in the changelog

I noticed “ tunnels - added VRF support for EoIP, IPIP and GRE tunnels;” in the changelog of version 7.7. What is this change exactly doing, is there detailed description?
by adlar
Fri Dec 16, 2022 6:19 pm
Forum: General
Topic: Is it possible to install routeros on gl-inet s1300
Replies: 2
Views: 524

Re: Is it possible to install routeros on gl-inet s1300

No. Only custom hardware supported is x86/x64. On all other architectures you need Mikrotik hardware to run ROS.
ok,Thank you.
by adlar
Fri Dec 16, 2022 6:09 pm
Forum: General
Topic: Is it possible to install routeros on gl-inet s1300
Replies: 2
Views: 524

Is it possible to install routeros on gl-inet s1300

Hello,
I have a small gl-inet s1300 router. Its main chip is Ipq4029. Is it possible to install routeros on it? Thanks for any advice on how to make it.
https://www.gl-inet.com/products/gl-s1300/
by adlar
Sun Dec 04, 2022 9:12 am
Forum: General
Topic: DNS doesn't work for vrf interface dns request
Replies: 0
Views: 368

DNS doesn't work for vrf interface dns request

Hello,
I created a vrf named as 'vrf_wg' which included three wireguard interfaces. The dns request from the wireguard interfaces failed. I guess this is because RouterOS doesn't support dns for vrf access yet. Is there any way such as firewall rules or routing rules to make the dns service work?
by adlar
Thu Nov 10, 2022 8:07 am
Forum: General
Topic: Is there a way to send customized packets between mikrotik routers
Replies: 4
Views: 614

Re: Is there a way to send customized packets between mikrotik routers

I hope I'm not forgetting some proper tool, but assuming I'm not, you have new enough RouterOS and don't mind ugly hacks, then something can be done: /ip dns static add type=FWD name=knock match-subdomain=yes forward-to=<Router B> /ip firewall nat add chain=output dst-address=<Router B> protocol=ud...
by adlar
Thu Nov 10, 2022 6:05 am
Forum: General
Topic: Is there a way to send customized packets between mikrotik routers
Replies: 4
Views: 614

Re: Is there a way to send customized packets between mikrotik routers

I hope I'm not forgetting some proper tool, but assuming I'm not, you have new enough RouterOS and don't mind ugly hacks, then something can be done: /ip dns static add type=FWD name=knock match-subdomain=yes forward-to=<Router B> /ip firewall nat add chain=output dst-address=<Router B> protocol=ud...
by adlar
Thu Nov 10, 2022 1:52 am
Forum: General
Topic: Is there a way to send customized packets between mikrotik routers
Replies: 4
Views: 614

Is there a way to send customized packets between mikrotik routers

I have two routers in public internet and add strict firewall rules that drop any traffic from unknown source address. Router A has dynamic pppoe ip address got from ISP. I want to notify the new address immediately to Router B whenever the ip is changed. So I need a knock-door mechanism such like s...
by adlar
Wed Nov 02, 2022 7:29 am
Forum: General
Topic: Unable to set up ipv6
Replies: 7
Views: 1060

Re: Unable to set up ipv6

That's not it, then. Does you address have any mask? Gateway needs to be within same subnet. Edit: Or when it isn't and you have route to gateway address via ether1 as you do, you may want to play with scope and target scope. I never really tested this with IPv6, but it might do the trick. That is ...
by adlar
Wed Nov 02, 2022 6:48 am
Forum: General
Topic: Unable to set up ipv6
Replies: 7
Views: 1060

Re: Unable to set up ipv6

> /ipv6/settings/print disable-ipv6: ?? /ipv6/settings/print : disable-ipv6: no forward: yes accept-redirects: yes-if-forwarding-disabled accept-router-advertisements: yes-if-forwarding-disabled max-neighbor-entries: 8192
by adlar
Wed Nov 02, 2022 5:40 am
Forum: General
Topic: Unable to set up ipv6
Replies: 7
Views: 1060

Unable to set up ipv6

I installed routeros 7.6 chr on a vps. Before the installation, the operating system was centos 7.6 and ipv6 did work.I wrote down the network configifuation including ipv4/6 address,subnet mask,gateway and reinstalled to routeros. The network configuation in routeros is exactly the same as centos,b...
by adlar
Fri Oct 21, 2022 4:53 pm
Forum: General
Topic: Can't get IPv6 SLAAC on router under another router
Replies: 10
Views: 2330

Re: Can't get IPv6 SLAAC on router under another router

Hi! I have a setup with to mikrotiks, one conected to internet and another onte on another room, connected by an ethernet cable. The router connected to internet works fine. It gets the prefix from ISP and advertise it to other devices I get. My PC, raspberry and smartphone can get the IPV6 address...
by adlar
Wed Oct 12, 2022 6:04 am
Forum: Beginner Basics
Topic: How to handle thounds of routes with dynamic gateway address in main routing table?
Replies: 4
Views: 581

Re: How to handle thounds of routes with dynamic gateway address in main routing table?

moderator note: do not quote whole preceding post. Use "Post Reply" instead. Setting next hop to interface or ip address is different. https://community.cisco.com/t5/networking-knowledge-base/static-routes-with-next-hop-as-an-exit-interface-or-an-ip/ta-p/3146984 For PPP/profile configurat...
by adlar
Tue Oct 11, 2022 12:48 pm
Forum: Beginner Basics
Topic: How to handle thounds of routes with dynamic gateway address in main routing table?
Replies: 4
Views: 581

Re: How to handle thounds of routes with dynamic gateway address in main routing table?

Try using pppoe-interface as gateway, instead of the IP address.
Will this cause unnecessary flooding?
by adlar
Tue Oct 11, 2022 11:49 am
Forum: Beginner Basics
Topic: How to handle thounds of routes with dynamic gateway address in main routing table?
Replies: 4
Views: 581

How to handle thounds of routes with dynamic gateway address in main routing table?

I put more than 4000 routes of which the gateway address is got from PPPOE into the "main" routing table. As a result, I have to update more then 4000 routes everytime when the pppoe address is changed. Is there any solution to avoid this happening? Thank you. The background is the access ...
by adlar
Sun Aug 21, 2022 11:29 am
Forum: RouterBOARD hardware
Topic: Does RB5009 support ipsec hardware acceleration?
Replies: 10
Views: 2920

Re: Does RB5009 support ipsec hardware acceleration?

The is nothing mentioned in change log now(including testing tree)
by adlar
Sun Aug 21, 2022 5:14 am
Forum: RouterBOARD hardware
Topic: Does RB5009 support ipsec hardware acceleration?
Replies: 10
Views: 2920

Re: Does RB5009 support ipsec hardware acceleration?

Thank you. looking foward for that :)
by adlar
Sun Aug 21, 2022 4:21 am
Forum: RouterBOARD hardware
Topic: Does RB5009 support ipsec hardware acceleration?
Replies: 10
Views: 2920

Does RB5009 support ipsec hardware acceleration?

I am interested in RB5009,but uncertain about ipsec hardware acceleration support.
I found nothing in the change log of stable release tree. But in 7.1rc3, it is mentioned that “hardware acceleration support for RB5009”.
So does RB5009 supports ipsec hardware acceleration?
by adlar
Thu Aug 18, 2022 6:55 am
Forum: RouterOS beta
Topic: Feature Request: Add dns query result ip address to address list dynamicly
Replies: 3
Views: 4311

Feature Request: Add dns query result ip address to address list dynamicly

Hi, I need to direct netflix and other stream media traffic to a specific vpn tunnel. For the destination ip addresses are dynamic, I can't add ip addresses to address list before watching video. And because sni are encrypted in tls1.3, content and tls-host do not work anymore. In openwrt,I can use ...
by adlar
Thu Aug 18, 2022 6:34 am
Forum: General
Topic: Confused by passthrough
Replies: 3
Views: 487

Re: Confused by passthrough

I wrote test rules and got answer.If a rule is to match some condition then take mark action, the '!passthrough' option equals 'accept'.
by adlar
Tue Aug 16, 2022 7:05 am
Forum: General
Topic: Confused by passthrough
Replies: 3
Views: 487

Confused by passthrough

I am confused by the 'passthrouth'. If I write a match->mark->!passthrough rule in a custom chain in prerouting chain. There are two prossible results. One is: !passthrouth= mark+accept,mark and finish processing in prerouting. The other is: !passthrough=mark+return,mark and return to prerouting cha...