Got to site to bond two mobile providers and found this. Router still working fine.

"...we will release new LTE/5G boards in future."

Exciting stuff, can't wait! Do you have any rough timeline?

Then go and start your own thread and ask for it, this is for Multi-WAN Bonding, and specifically for Speedify

I second this. Perhaps if Speedify just creates the configuration script needed..

As the subject says

New firmware version out 13

More recent upgrade now availble

The most serious problem, which we are now seeing on hundreds of units is the disconnecting randomly of the LTE interface.

Do you perhaps mean vlan takes it's master's interface?

I thought I was going CRAZY as nobody else had experienced this. Have tried net-install via Ethernet and USB and no joy. I now have 4 SXT's bricked. All with this version of Mikrotik (6.33.1 works fine, 6.33.2 bricks) and only on the 5GhzAC version) - lvl 4 licence. I performed the upgrade from with...

Is this the correct place to post this sort of problem? Why is this man not getting any help or suggestions from Mikrotik? Surely you guys have one quick answer to solve this config problem? I was considering buy several hundred for large business parks I administrate but with this up in the air you...

Hi, Running Mikrotik 6.15 and I am getting static DNS entries being automatically added that are incorrect. I have a PPPoE dialup and I get my dns from the ISP. The problem is admin.google.com is going to the caching server of 69.233.125.74.in-addr.arpa which means I cannot open the page. I am tryin...

Seriously? Not enough demand? Thats crazy. Everyone I know uses these somewhere connected to DSL in South Africa and they are loosing business not offereing this option on at least ONE router. Would be nice if it was also a gigabit router with at least one wireless slot so that it compares to other ...

Strange they dont delete or answer these old questions.

I would not try using all four cards in one esspecially if they are high powered cards. Overtaxes the motherboard pci slot. Most likely end result is dead MB. Just replaced a pc motherboard yesterday.

Hi,

Working using your suggestion!

I can't figure out how to see the mac address (nothing in the camera web interface) and not seeing it using the plenthora of tools on the mikrotik (torch etc) so just allowing by IP and it works!

Thanks for the assistance.

Hi guys, I have a hotspot on a router with internet connectivity. In the hotspot are three camera's. I have put rules in both the garden wall rules and IP sections to allow the camera's to get through the hotspot but for the love of garden pixies I cannot get the traffic out. I have set rules to all...

strange thing I don't get any traffic showing in the firewall rule you posted.. even when logged in remotely via web interface.

In the end you were correct. The ISP has instituted a new security measure that has to be disabled that prevents inward http requests: ADSL Protected Access ___________________________________________________________ Helps to keep your ADSL connection safe from hackers who may try to steal your band...

I have several other routerboards working perfectly. U can access these web interfaces from the internet fine.. and port forwarding works fine too. damn wtf I just made a long post and hit submit and everything dissapeared :(.. mmmm Anyway, access to the this board specifically seems to be the probl...

Thanks for the quick reply guys: [zenon@Montagus] > /ip service print Flags: X - disabled, I - invalid # NAME PORT ADDRESS CERTIFICATE 0 telnet 23 1 ftp 21 2 www 80 3 ssh 22 4 www-ssl 443 none 5 api 8728 6 winbox 8291 and [zenon@Montagus] > /ip firewall filter print Flags: X - disabled, I - invalid,...

my bad,
change-ip.com

Yep, I have used this on many of my sites and works a charm,
cheerz

Hi, Problem is I can't access my web interface from the outside (internet) ip via the web interface. I can ping the external (pppoe) ip, from a remote location on the internet, I can winbox into the router also through the ppoe ip, but I can't access the router's web interface from the outside. From...

Hi guys, I have been struggling with this for a week now and figure someone might just be able to help in 0.00254 seconds :) I am trying to setup a queue on ip's on a local lan. The range is 192.168.0.0/24 and I have a RB750 with ether3 and ether4 bridged. I have given the bridge an ip (192.168.0.16...

You need two scripts. First one is to connect to the changing ip via dyndns or other such service. I use no-ip.com and here is the script for that (pasted exactly from my board minus the private details): # Dynamic DNS Update / Simple Edition # Written by Sam Norris, ChangeIP.com # Copyright ChangeI...

Can somone please confirm this works and suggest any better coding / method?

Hi, The company I am working for just bought $10 000 worth of routerboards for a wireless network to be installed at a game lodge. A friend started the configuring of the wlan in the office and all went fine. However when I got into the field I was shocked to blow two boards in two days. All boards ...

Search in the wiki, there is an example already made in one of the posts

Thanks, I will take a look and let you know what happens. One small thing you misunderstood though.. my pppoe is on the wlan1 interface. (I connect wirelessly to my isp).

Thanks for all the help so far.
ciao

I'm trying to get my 532 to connect to my 112 wirelessly. 112 routerboard: ip is 192.168.200.1 - connected to isp via pppoe (wlan1) - bridged wlan2 and eth1 - have browsing from any device connecting wirelessly to wlan2 or eth1 with dhcp 532 routerboard: ip is 192.168.200.40 subnet mask - 255.255.25...