Community discussions

Search found 52 matches

by richard_s
Mon Oct 07, 2019 5:32 am
Forum: Wireless Networking
Topic: wAP 60G experience
Replies: 290
Views: 41690

Re: wAP 60G experience

When will they put a SFP+ interface on wAP 60G ? and add MS13 capability.
by richard_s
Sat Apr 06, 2019 11:11 pm
Forum: General
Topic: SIP port(s)
Replies: 6
Views: 479

Re: SIP port(s)

I am aware of these Van9018 what would be nice would be have less boxes I.E all in one box.
by richard_s
Sat Apr 06, 2019 6:51 pm
Forum: General
Topic: SIP port(s)
Replies: 6
Views: 479

Re: SIP port(s)

Yes like an RJ11 to plug in an analogue phone into
by richard_s
Sat Apr 06, 2019 4:35 pm
Forum: General
Topic: SIP port(s)
Replies: 6
Views: 479

SIP port(s)

Are there any plans to add any SIP ports to any switches or routers? The HAP ac with one would make an ideal home router with a SIP port added and remove the need for an extra box for VOIP.
by richard_s
Tue Jul 30, 2013 6:40 pm
Forum: RouterBOARD hardware
Topic: RB411L capacitor
Replies: 0
Views: 594

RB411L capacitor

I dropped the routerboard and broke off C809 it is marked up as:-
A9
470J
CW

I have googled it to no avail. Does anyone know the value for replacement?

Thanks

Richard
by richard_s
Wed Jun 05, 2013 11:37 pm
Forum: General
Topic: Routing problem
Replies: 0
Views: 734

Routing problem

I have setup a RB411AR OS v6.0. I can ping Wlan1 from the Bridge only. setup below [admin@richardss_1] /ip> export # jan/01/2002 01:12:14 by RouterOS 6.0 # software id = 66KG-MJEL # /ip hotspot profile set [ find default=yes ] login-by=http-chap use-radius=yes add hotspot-address=10.5.50.1 login-by=...
by richard_s
Wed Jun 05, 2013 1:13 am
Forum: Beginner Basics
Topic: Nearley dead RB433
Replies: 3
Views: 615

Re: Nearley dead RB433

Hi Mark,
Electrolytics were OK tried a new power supply all OK. It fooled me by partley booting.

Many thanks

Richard
by richard_s
Tue Jun 04, 2013 11:38 am
Forum: Beginner Basics
Topic: Nearley dead RB433
Replies: 3
Views: 615

Nearley dead RB433

I have the following problem, The router board beeps once then no more beeps. I have tried to see it via winbox and neighbour viewer No luck, Then I tried telnet and got this below. Is there a way I can recover this board? Thanks in advance Richard RouterBOOT booter 2.29 RouterBoard 433 CPU frequenc...
by richard_s
Thu May 02, 2013 12:02 pm
Forum: Beginner Basics
Topic: Help routing problem
Replies: 6
Views: 1114

Re: Help routing problem

I have tried columf's suggestion. config is:- /ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK INTERFACE 0 192.168.1.17/24 192.168.1.0 wlan1 1 192.168.2.1/24 192.168.2.0 bridge1 /ip route> print Flags: X - disabled, A - active, D - dynamic, C - connect, S - static, ...
by richard_s
Thu May 02, 2013 11:18 am
Forum: Beginner Basics
Topic: Help routing problem
Replies: 6
Views: 1114

Re: Help routing problem

Pardon my ignorance but how do I set the next hop?

Thanks

Richard
by richard_s
Wed May 01, 2013 5:46 pm
Forum: Beginner Basics
Topic: Help routing problem
Replies: 6
Views: 1114

Help routing problem

I have been trying to setup a RB433 (V5.11) with 192.168.1.17 (Gateway to internet 192.168.1.1) on Wlan1 and 192.168.2.1 on Bridge1. No matter what I have tried I cannot get a connection from 1 networkto the other. What have I done wrong or what is missing? ip> address print Flags: X - disabled, I -...
by richard_s
Sat Sep 01, 2012 3:52 pm
Forum: General
Topic: Cooling question
Replies: 4
Views: 782

Re: Cooling question

Thanks for that Murray finaly found info. Now does anyone know where to get 18 and 24 volt fans 40mm X 40mm X 20-30mm size with rotation sensor. Preferably in Europe.

Thanks

Richard
by richard_s
Sat Sep 01, 2012 10:35 am
Forum: General
Topic: Cooling question
Replies: 4
Views: 782

Cooling question

Hello All,
Does anyone know of a web site which has a list of which lists all the Router boards that can power a fan.

Thank you

Richard
by richard_s
Sun Jul 17, 2011 5:25 pm
Forum: The Dude
Topic: Dude and RB750 problem
Replies: 0
Views: 760

Dude and RB750 problem

I have a RB750 the Dude sees it but when I try to assign a link to it it does not see any interfaces.

Anyone any ideas?

Richard
by richard_s
Tue Apr 26, 2011 4:17 pm
Forum: Beginner Basics
Topic: New to hotspot setup
Replies: 0
Views: 361

New to hotspot setup

Hello all,
I am looking at setting up a hotspot using a RB433 with hotspotsystem.com software. Has anyone used them before and are there any pitfalls you could share? Or any succsess storys to share.

Thanks

Richard
by richard_s
Wed Dec 01, 2010 11:22 am
Forum: Beginner Basics
Topic: Routing problem
Replies: 7
Views: 1006

Re: Routing problem

I have removed :- 2 10.0.0.2/24 10.0.0.0 10.0.0.255 wlan1.
Still no luck.

Richard
by richard_s
Tue Nov 30, 2010 1:17 pm
Forum: Beginner Basics
Topic: Routing problem
Replies: 7
Views: 1006

Re: Routing problem

RB433 Eth 1= 10.0.0.xxx Eth 2=10.0.0.xxx Eth 3= 192.168.1.xxx Wlan 1 = 10.0.0.xxx [admin@MikroTik] /ip address> print Flags: X - disabled, I - invalid, D - dynamic # ADDRESS NETWORK BROADCAST INTERFACE 0 192.168.1.200/24 192.168.1.0 192.168.1.255 ether3 1 10.0.0.1/24 10.0.0.0 10.0.0.255 bridge1 2 10...
by richard_s
Mon Nov 29, 2010 9:57 pm
Forum: Beginner Basics
Topic: Routing problem
Replies: 7
Views: 1006

Re: Routing problem

how do I copy text from telnet to paste on forum?

Thanks

Richard
by richard_s
Mon Nov 29, 2010 9:42 pm
Forum: Beginner Basics
Topic: Routing problem
Replies: 7
Views: 1006

Routing problem

I am trying to set up a RB433 where the ETH 3 is on 192.168.1.xxx and the router board is on 10.0.0.xxx. I can ping the gateway on 192.168.1.xxx from the internal bridge but not from any other ports. anyone have any ideas?

Richard
by richard_s
Fri Oct 29, 2010 8:41 pm
Forum: The Dude
Topic: RB 411 problem
Replies: 2
Views: 1114

Re: RB 411 problem

Found the answer. SNMP not enabled on bridge. Now just got to get the ethernet connection to display trafic.

Richard
by richard_s
Wed Oct 27, 2010 11:10 pm
Forum: The Dude
Topic: RB 411 problem
Replies: 2
Views: 1114

RB 411 problem

I have a RB411 that does not respond to the Dude. It just stays red.

Anyone else seen this and found a fix?

Thanks

Richard
by richard_s
Wed Jul 28, 2010 9:08 pm
Forum: General
Topic: Dude problem
Replies: 1
Views: 374

Dude problem

Hello all,
I have a RB411 on my network V4.9. I am running the Dude V3.6 on windows XP. The Dude does not communicate with it. The box is workong fine I can see beyond the link. All probes timeout. Is it a problem with the Board or OS or both. All my other boxes report perfectly.

Thanks

Richard
by richard_s
Mon Jun 29, 2009 11:07 am
Forum: The Dude
Topic: Show us your map
Replies: 60
Views: 44807

Re: Show us your map

Thanks for the info, I will give it a go when I have some spare time.

Richard
by richard_s
Mon Jun 29, 2009 1:23 am
Forum: The Dude
Topic: Show us your map
Replies: 60
Views: 44807

Re: Show us your map

Can anyone tell me how to get my network map on google earth or similar mapping software

Thanks

Richard
by richard_s
Fri Jan 30, 2009 11:16 pm
Forum: The Dude
Topic: network map problem
Replies: 3
Views: 813

Re: network map problem

Hi kameelperdza
I can select turbo mode with no problem

richard
by richard_s
Wed Jan 21, 2009 10:58 pm
Forum: The Dude
Topic: network map problem
Replies: 3
Views: 813

network map problem

hi all a router board 433 as an AP i have wireless client router board 411. i have manually linked the boards as a wireless connection. but..... dude keeps linking rb411 direct to my network cloud bypassing the ap. both routerboards running software 3.19 dude version 3.0. anyone any thoughts. thanks...
by richard_s
Sun Jan 11, 2009 2:23 am
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

the laptop is the only PC on IP is set to 10.0.0.2 255.255.255.0
i can ping gateway but cant surf?
could i be missing any other perameter?

richard
by richard_s
Sun Jan 11, 2009 12:16 am
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

thought i had it but......
can ping from eth1 10.0.1.1 to gateway 172.26.0.1 but.......
cannot surf the web from laptop plugged into eth1.
route print says gateway state= reachable.
its one of those days

richard
by richard_s
Sat Jan 10, 2009 10:31 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

thanks very much for that i had gone off down the wrong track with my thinking, now the penny has dropped. programming is not my forte i am still learning with a long way to go.
once again many thanks for the help

richard
by richard_s
Sat Jan 10, 2009 7:43 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

thanks for the reply
i am using windows what i dont know is where to put the "You must assign the ip range 10.0.0.2-10.0.0.253" is it to go into the mikrotik box if so where?

richard
by richard_s
Sat Jan 10, 2009 7:29 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

so they have to be done one at a time. what directory do i do this in? and whats the format. i am going to be using static IP's as this network will be used for 10 TV channels.

thanks

richard
by richard_s
Sat Jan 10, 2009 7:18 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

no i know how to access box its how do i input information (ip or ip firewall) and what format do i put "You must assign the ip range 10.0.0.2-10.0.0.253 with gateway" in

thanks

richard
by richard_s
Sat Jan 10, 2009 5:06 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

pardon my ignorance but how do i do that in telnet?

thanks

richard
by richard_s
Fri Jan 09, 2009 10:53 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

thanks surfertim
i will try that tomorrow

thanks

richard
by richard_s
Fri Jan 09, 2009 9:48 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

for now i am only going to use 1 for local PC. internet will be coming in from wlan1 wlan2 will be used for local AP on 10.0.1.xxx network.

richard
by richard_s
Fri Jan 09, 2009 6:58 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

Re: where am i going wrong?

hi arE is this what you want? /ip firewall filter add action=add-dst-to-address-list address-list=1 address-list-timeout=0s chain=forward \ comment="" disabled=yes dst-address=172.26.0.0/24 out-interface=wlan1 routing-mark=main \ src-address=10.0.1.0/24 [admin@LOS_CRIS_2] /ip address> print Flags: X...
by richard_s
Thu Jan 08, 2009 11:11 pm
Forum: Beginner Basics
Topic: where am i going wrong?
Replies: 21
Views: 1788

where am i going wrong?

hello all i have been trying to set up NAT as in http://wiki.mikrotik.com/wiki/NAT_Tutorial. internet connection on wlan1 IP 172.26.0.200 coming from 192.26.0.199. IP of router box (RB433 v3.17) 10.0.1.6 (bridge1) i can ping to 192.26.0.199 from bridge1 but not from eth1,2 or 3. there does not seem ...
by richard_s
Thu Oct 16, 2008 12:19 am
Forum: Beginner Basics
Topic: help please
Replies: 9
Views: 1270

Re: help please

hello eneimi
on the first RB there is only 1 AP. the link 10.1.0.1 is a bridge to 10.1.0.2 on AP2
10.1.0.3 is for future link for AP 3 I am looking for location to put that in.
I am using static IP addresses not DHCP.


thanks

richard
by richard_s
Tue Oct 14, 2008 11:15 pm
Forum: Beginner Basics
Topic: help please
Replies: 9
Views: 1270

Re: help please

I have done a simple diagram of the network. This might make it easier for you to understand what I am trying to do.

thanks

richard
by richard_s
Wed Oct 08, 2008 9:06 pm
Forum: Beginner Basics
Topic: Mikrotik As an ADSL Modem
Replies: 14
Views: 36662

Re: Mikrotik As an ADSL Modem

Iwish they would do.
add your vote herehttp://wiki.mikrotik.com/wiki/RouterBOARD_Feature_Request

richard
by richard_s
Wed Oct 08, 2008 6:44 pm
Forum: Beginner Basics
Topic: help please
Replies: 9
Views: 1270

Re: help please

1st setup RB411 2 wireless cards 1 2.4ghz local AP ip address 10.0.0.xxx second wireless card 5.8ghz (bridge to second AP) bridge ip address 10.1.0.1 to 10.1.0.2 at other end. 2nd set up RB411 2 wireless cards 1 2.4ghz local AP ip address 10.0.1.xxx second wireless card bridge in from other AP. rich...
by richard_s
Sat Oct 04, 2008 12:13 am
Forum: Beginner Basics
Topic: help please
Replies: 9
Views: 1270

Re: help please

there are 2 ap's internet at one i want to bridge between the 2 ap's. and use the internet connection a the first to supply the second. the 2 ap's have been defaulted. i had alsorts of configs in them some may have been causing problems.
by richard_s
Sat Oct 04, 2008 12:00 am
Forum: Beginner Basics
Topic: help please
Replies: 9
Views: 1270

help please

i am switching to mikrotik and want to create the following. AP (wlan1), ethernet and internet gateway on 10.0.0.xxx bridge on 10.1.0.1 (wlan2) to 10.1.0.2 (wlan2) on second ap the ap (wlan1) & ethernet on 10.0.1.xxx i have tried to make this config work but with partial success i have not been able...
by richard_s
Thu Jul 17, 2008 11:19 pm
Forum: RouterBOARD hardware
Topic: RB433 fan question
Replies: 2
Views: 961

Re: RB433 fan question

thanks for the reply Kijomabb. i think thats the route i will go

richard
by richard_s
Tue Jul 15, 2008 4:01 pm
Forum: RouterBOARD hardware
Topic: RB133 or RB192
Replies: 6
Views: 1134

Re: RB133 or RB192

received reply from mikrotik. they say replacement is RB433.

richard
by richard_s
Mon Jul 14, 2008 8:05 pm
Forum: RouterBOARD hardware
Topic: RB133 or RB192
Replies: 6
Views: 1134

Re: RB133 or RB192

i to need one. i have a building with several apartments and need to link to 2 of them. i have just emailed mikrotik to ask if they have or are planning to produce a replacement

richard
by richard_s
Sat Jul 12, 2008 6:22 pm
Forum: RouterBOARD hardware
Topic: RB433 fan question
Replies: 2
Views: 961

RB433 fan question

i am looking for a source for a 3.3v fan for the RB433. anyone know of a source?
are they available from mikrotik? if so how do i order some

thanks

richard
by richard_s
Wed Jun 25, 2008 10:04 pm
Forum: Beginner Basics
Topic: 2 ips to 1 card?
Replies: 6
Views: 1029

Re: 2 ips to 1 card?

the plot seems to have gone astray (or i was not detailed enough). i want to assign 2 ip addresses to the AP (wireless card not the ethernet ports). this would enable me to put new customers on my new address range and over a period of time change my existing customers to the new range. thanks richard
by richard_s
Wed Jun 25, 2008 3:51 am
Forum: Beginner Basics
Topic: 2 ips to 1 card?
Replies: 6
Views: 1029

Re: 2 ips to 1 card?

i am using fixed ips due to using iptv etc

richard
by richard_s
Tue Jun 24, 2008 9:57 pm
Forum: Beginner Basics
Topic: 2 ips to 1 card?
Replies: 6
Views: 1029

2 ips to 1 card?

i am looking to change out my entire network to mikrotik and at the same time renumber my ip addresses.
my question is can i assign multiple ip addresses to my access points whilst i change over my customers so they do not loose connectivity.
thank you

richard
by richard_s
Wed Nov 07, 2007 3:58 pm
Forum: Wireless Networking
Topic: RB 333 not working on long cable run
Replies: 6
Views: 1141

Re: RB 333 not working on long cable run

i have spliced the dc output from fhe mains transformer and extended it using heavy duty speaker cable. it works fine on my AP's its cheaper than using POE.

richard
by richard_s
Wed Nov 07, 2007 3:53 pm
Forum: Wireless Networking
Topic: 802.11a/b/g spanish regulations
Replies: 3
Views: 776

Re: 802.11a/b/g spanish regulations

i to would like to know if you need a licence to operate in spain. also where are you cieplik206 and nowires what area of spain?

richard
canary islands