Community discussions

MUM Europe 2020

Search found 63 matches

by pastranini
Sat Dec 18, 2010 10:48 pm
Forum: General
Topic: RB 133c and Bios Dead
Replies: 0
Views: 339

RB 133c and Bios Dead

Press any key within 2 seconds to enter setup..
loading kernel from nand... OK
setting up elf image... OK
jumping to kernel code
System halted.

that happened when i tried to use the hyperterminal and the serial cable.

I fixed a lot of boards in the same way but in this case i cant do it.

Thanks
by pastranini
Thu Dec 16, 2010 1:23 am
Forum: RouterBOARD hardware
Topic: Rb433ah all Ethernet interfaces failed
Replies: 1
Views: 517

Rb433ah all Ethernet interfaces failed

Hi all.

This is so weird, I only have with this rb for 2 moths, the leds of each ether interface dont blink when i connect a cable, but the led in the minipci (xr5 is ok) and the leds on the board shine when i restar it

Can I fic this by using serial port??? or the rb is dead??

Thanks
by pastranini
Sat Jul 31, 2010 2:16 am
Forum: Wireless Networking
Topic: Virtual AP not working
Replies: 9
Views: 3399

Re: Virtual AP not working

I all.

Just A Comment


I had a lot of problems with Engenius Cards when i tried to setup 2 VAP in each interface i change the cards to r52h and inmmediatly worked.

Sometimes, we picked the wrong cards for different scenario.
by pastranini
Sat Jul 31, 2010 2:16 am
Forum: Wireless Networking
Topic: Virtual AP not working
Replies: 9
Views: 3399

Re: Virtual AP not working

I all.

Just A Comment


I had a lot of problems with Engenius Cards when i tried to setup 2 VAP in each interface i change the cards to r52h and inmmediatly worked.

Sometimes, we picked the wrong cards for different scenario.
by pastranini
Thu Jul 01, 2010 11:11 pm
Forum: Wireless Networking
Topic: BIG BUG- Unicast key exchange timeout
Replies: 120
Views: 95710

Re: BIG BUG- Unicast key exchange timeout

HI i have the same problem. If the link has not security the link works great. Im using wpa2 and the link is good for 1 or 2 hours, but inmeadeatly falls down. I use wep, wpa, and suddenly the log shows the message unicast key exchange timeout. I am thinking to change the cards, I dont not how solve...
by pastranini
Sat Feb 06, 2010 10:42 pm
Forum: General
Topic: RB750
Replies: 1
Views: 421

RB750

Hi all.

I have an Office with 40 computers, my cuestion is, if the rb750 has the capacity in his proccesor for this office.

It will work (queues tree, simple, and some rules in firewall)

Thanks
by pastranini
Thu Nov 19, 2009 8:21 am
Forum: General
Topic: NTH IN RB450 3.23
Replies: 1
Views: 410

NTH IN RB450 3.23

Hi all. i Have a rb450 I know this topic is very bored for all. but i have been having problems with different ways of it. The next conf works fine, without problems. At first I set load balancing with 3 dsl 2mb,2mb,1mb =5mb. Well I calculated the conexion WAN1= 2/5=.40% WAN2=2/5=40% WAN3=1/5=20% So...
by pastranini
Thu Nov 19, 2009 7:06 am
Forum: RouterBOARD hardware
Topic: Problem with NTH in RB450
Replies: 1
Views: 701

Problem with NTH in RB450

Hi all. i Have a rb450 I know this topic is very bored for all. but i have been having problems with different ways of it. The next conf works fine, without problems. At first I set load balancing with 3 dsl 2mb,2mb,1mb =5mb. Well I calculated the conexion WAN1= 2/5=.40% WAN2=2/5=40% WAN3=1/5=20% So...
by pastranini
Thu Nov 19, 2009 3:43 am
Forum: Beginner Basics
Topic: Is it poosible to have 2 route list ?
Replies: 5
Views: 801

Re: Is it poosible to have 2 route list ?

Hi There.

Please add me
apg82@hotmail.com

Its better and faster

thanks
by pastranini
Thu Nov 19, 2009 3:39 am
Forum: Beginner Basics
Topic: How do i add a modem to my router
Replies: 10
Views: 1547

Re: How do i add a modem to my router

Hi For a simple conf ,At first you have to add a new PPPOE client on eth1 with user, pass, check use peer dns and add default route. In /ip dns use a correct DNS On eth2 add an ip address and connect to itself and set in your nica card an ip of the same range that eht2. And you have to go out. Regar...
by pastranini
Wed Nov 18, 2009 8:51 am
Forum: Beginner Basics
Topic: Youtube And Facebook Queue traffic
Replies: 4
Views: 2234

Re: Youtube And Facebook Queue traffic

You can use mangle with routing mark after that use the result in ip/route.

Regards.
by pastranini
Wed Nov 18, 2009 8:47 am
Forum: Beginner Basics
Topic: Is it poosible to have 2 route list ?
Replies: 5
Views: 801

Re: Is it poosible to have 2 route list ?

You can add add one more nic card and connect the second line, after that you can use mangle in order to select the gateway for each line.

Regards
by pastranini
Wed Nov 18, 2009 8:31 am
Forum: Beginner Basics
Topic: How do i add a modem to my router
Replies: 10
Views: 1547

Re: How do i add a modem to my router

You have problem with DNS check that.
by pastranini
Wed Nov 18, 2009 8:27 am
Forum: Beginner Basics
Topic: manually setting ack-timeout
Replies: 1
Views: 794

Re: manually setting ack-timeout

Hi.

This is that you have to do.

/interface wireless> set wlan1 ack-timeout=56 or the value that you need.

Regards.
by pastranini
Tue Nov 17, 2009 10:15 am
Forum: General
Topic: Load balancing
Replies: 7
Views: 1129

Re: Load balancing

Hi Shrek
You can use n-streme or maybe bonding

regards
by pastranini
Tue Sep 29, 2009 1:58 am
Forum: RouterBOARD hardware
Topic: rb493ah
Replies: 0
Views: 503

rb493ah

Hello all.

I have a project with 150 users I want to use hotspot also I will make load balancing 3dsl with 4mbps each.

I going to use 3 sector 17dbi 120°, 3 r52h each for sector.

My question is, the rb493ah's cpu can works good or need i to install a cpu with RouterOs.

Thanks.
by pastranini
Sun Aug 23, 2009 11:30 pm
Forum: Wireless Networking
Topic: Mikrotik and NS2 Fail
Replies: 0
Views: 426

Mikrotik and NS2 Fail

Hi There. I have 4mbps in dsl. I have been working in a link 6.8km at firts I had 2 NS2 and the link worked excelent, when i made a speedtest in internet in the client side i reached 3.8mbps that was excelent. After 3 months i needed to improve my network using QoS and I installed a Mikrotik 433ah w...
by pastranini
Sun Aug 23, 2009 9:09 am
Forum: Wireless Networking
Topic: help me i my network
Replies: 7
Views: 1005

Re: help me i my network

Amigo veo que se te dificulta un poco el ingles, ponmelo en español yo te ayudo.

Por lo que veo tu no tienes problemas, simplemente quieres hacer la red como el diagrama.
saludos.
by pastranini
Sat Jun 13, 2009 3:31 am
Forum: Wireless Networking
Topic: 20Mbps or more
Replies: 5
Views: 1308

20Mbps or more

Hello All.

I have a project about a link 7km, I Require 20mbps real or more.

Can someone give me an advice about what equipments need ??????????? I Think about 433ah with ubiquiti SR2.



Thanks for all.

Regards.
by pastranini
Sat May 09, 2009 8:40 pm
Forum: Beginner Basics
Topic: VPN Server - Not able to contact other users in network
Replies: 6
Views: 1768

Re: VPN Server - Not able to contact other users in network

HI
CAN YOU POST THE CONF OF YOUR OFFICE AND HOME???

I USE VPN'S AND WORKS GOOD¡¡¡¡

REGARDS
by pastranini
Sat May 09, 2009 8:34 pm
Forum: Beginner Basics
Topic: Hotspot security issue
Replies: 4
Views: 1604

Re: Hotspot security issue

TRY TO MATCH THE MAC WITH THE IP ADDRESS OF EACH CLIENT.
by pastranini
Sat May 09, 2009 12:28 am
Forum: Wireless Networking
Topic: INDOOR WITHOUT LINE OF SIGHT
Replies: 2
Views: 740

Re: INDOOR WITHOUT LINE OF SIGHT

Hi Normis. Is an old building, the walls are of concrete some of them has 18cm and other 40cm. In the branch are 10pc and 5 VoIp. I have been using the Omni Swivel antenna, that was my first proof. I was thinking about 900Mhz but is more expensive that 2.4. Could you give me an advice about what kin...
by pastranini
Wed May 06, 2009 3:25 am
Forum: Wireless Networking
Topic: INDOOR WITHOUT LINE OF SIGHT
Replies: 2
Views: 740

INDOOR WITHOUT LINE OF SIGHT

HELLO ALL. I HAVE THIS SCENARIO, 2 OFFICES WITH OUT WINDOWS IN THE SAME BUILDING AND IN THE SAME FLOOR WITH OFFICES BETWEEN THEM AND 20MTS OF DISTANCE. THE BETTER SOLUTION IS USIING CABLE, BUT I MUST NOT USE THAT. I HAVE BEEN TRYING WITH RB433 AND SR2 IN BOTH SIDES, I GOT 3.5mbps/2.4mbps IN BANDWIDH...
by pastranini
Wed Feb 25, 2009 1:22 am
Forum: General
Topic: Load Balancing 3dsl, Bank's pages not resolve
Replies: 13
Views: 5619

Re: Load Balancing 3dsl, Bank's pages not resolve

When I Login in to the banks the page works good, but when i tried to make other operation the connection broke and the pag shows me the message of the last post.

I Will try to fix the problem using 2 rules of mangle.

Thanks.
by pastranini
Fri Feb 20, 2009 6:13 pm
Forum: General
Topic: Load Balancing 3dsl, Bank's pages not resolve
Replies: 13
Views: 5619

Re: Load Balancing 3dsl, Bank's pages not resolve

Yes Normis I Know that i need https, I allowed 443 but nothing happend, I got crazy, customers want to shot me

Chupaka this is the traslation

For your security We remember that you can not login in this way to the application so that you have been redirect and your IP has been registred
by pastranini
Fri Feb 20, 2009 3:01 am
Forum: General
Topic: Load Balancing 3dsl, Bank's pages not resolve
Replies: 13
Views: 5619

Re: Load Balancing 3dsl, Bank's pages not resolve

I DONT KNOW WHAT HAPPENED WITH THE BANK PAGES. BUT IN ONE OF THOSE APPEAR THE PICTURE THAT I ATTACHED, BUT WHEN I CONNECTED DIRECTLY MY LAPTOP TO THE DSL WORKS GOOD.
by pastranini
Thu Feb 19, 2009 1:57 am
Forum: General
Topic: Load Balancing 3dsl, Bank's pages not resolve
Replies: 13
Views: 5619

Re: Load Balancing 3dsl, Bank's pages not resolve

THIS IS MY CONF. ON RB450 (this is use only for loadbalancing) MANGLE: 0 ;;; WAN1 chain=prerouting action=mark-connection new-connection-mark=wan1 passthrough=yes connection-state=new in-interface=ether1 nth=2,0 1 chain=prerouting action=mark-routing new-routing-mark=wan1 passthrough=no in-interface...
by pastranini
Wed Feb 18, 2009 6:54 pm
Forum: General
Topic: Load Balancing 3dsl, Bank's pages not resolve
Replies: 13
Views: 5619

Load Balancing 3dsl, Bank's pages not resolve

Hello All
I made loadbalancing with 3 wan 4mb each, after that all my bank pages dont work. I attached a picture of my network.

Im trying resolve this problem by setting MTU less of 1500, change MSS, but i dont know how can i do.

Some Advicess????
by pastranini
Wed Feb 04, 2009 9:25 pm
Forum: Wireless Networking
Topic: Advice on IP addresses - wireless and video
Replies: 2
Views: 609

Re: Advice on IP addresses - wireless and video

Yes, thats the right solution, try it.
Im working with that conf.
by pastranini
Thu Jan 22, 2009 6:32 pm
Forum: Wireless Networking
Topic: WDS get lost in ports of the brigde
Replies: 0
Views: 374

WDS get lost in ports of the brigde

Hello All I have a transparent brigde 2 networks with RB411A like this http://wiki.mikrotik.com/wiki/Transparently_Bridge_two_Networks but every morning when i check my equipment on AP side, i see that the WDS in ports of the brigde is UNKNOWN, only work the ether either wlan but WDS NOT and I have ...
by pastranini
Fri Dec 12, 2008 6:47 pm
Forum: General
Topic: NTH 3 Y 4 CONNECTIONS
Replies: 0
Views: 589

NTH 3 Y 4 CONNECTIONS

Hello , here I am again. I Know this post is so large and tired but I need your help. I have 3.13 in my pc and I have been trying to made load balancing with 3 or 4 connections, with 2 worked good as manual said, but i dont know what happend or what i set wrong. I'll post my rules, and the conf of t...
by pastranini
Thu Dec 11, 2008 7:24 pm
Forum: General
Topic: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14
Replies: 9
Views: 2110

Re: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14

Thanks for all, I fixed my problem.

All your advices are very good,

I erased all and I have begun to set again all rules.

Regards Friends¡¡¡¡¡

I have other problem, need I to make a new post, or can i continue here??
by pastranini
Tue Dec 09, 2008 7:09 pm
Forum: General
Topic: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14
Replies: 9
Views: 2110

Re: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14

with routeros 2.9 all worked good.
thanks
by pastranini
Tue Dec 09, 2008 6:53 pm
Forum: General
Topic: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14
Replies: 9
Views: 2110

Re: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14

Ok sorry but, i was not shouting :P I have a real mess with some rules. 0 X chain=input action=drop in-interface=!PCI Card dst-port=3128 protocol=tcp 1 X chain=input action=drop src-address=172.16.102.53 protocol=icmp 2 X chain=input action=drop src-address-list=BLACKFTP dst-port=21 protocol=tcp 3 X...
by pastranini
Sat Dec 06, 2008 7:59 pm
Forum: General
Topic: A LOT OF PROBLEMS WITH FTP IN VERSION 3.14
Replies: 9
Views: 2110

A LOT OF PROBLEMS WITH FTP IN VERSION 3.14

HELLO I UPGRADED THE ROUTEROS FROM 2.9.49 TO 3.13
I HAVE BEEN TAKING A LOT OF PROBLEMS WHEN I TRIED TO GET FILES FROM FTP SERVERS.
THE CONNECTION GETS STATUS ESTABLISHED BUT SUDDENLY THE CONNECTION GETS STUCK AND I HAVE A NOTICE "TIMEOUT CONNECTION".

THANKS FOR HELPING ME
by pastranini
Tue Oct 28, 2008 1:43 am
Forum: Wireless Networking
Topic: Block facebook
Replies: 37
Views: 42384

Re: Block facebook

Add a rule, in firlter forward, in content facebook its a easyway
i resolve that problem with this rule.
by pastranini
Thu Sep 18, 2008 10:32 pm
Forum: Wireless Networking
Topic: How to Convert Cellullar Signal to WIfi with Mikrotik
Replies: 3
Views: 1261

How to Convert Cellullar Signal to WIfi with Mikrotik

Hello, A Client ask me if i can make your travel bus with wifi system, i Told him yes, I know that there are routers with 3g,

But, How can i use mikrotik with this project???

I want to use the cellullar towers, like i-phone.

Please Im very confuse with this project.
by pastranini
Sun Jul 06, 2008 11:40 am
Forum: Beginner Basics
Topic: sometime web page is missing
Replies: 2
Views: 887

Re: sometime web page is missing

Are you using NAT ?????

How connect your Internet to the MK, by pppoe or dhpc-client from a modem.
by pastranini
Sun Jul 06, 2008 11:24 am
Forum: Wireless Networking
Topic: MY WLAN IS BLIND ¡¡¡¡¡
Replies: 5
Views: 1520

Re: MY WLAN IS BLIND ¡¡¡¡¡

Hi Inox
I have already done that, and the result is the same.
At 3 mts nextto the mast are 3 high voltage lines but the antenna is 4 mts above the lines, I changed 3 radio cards.
Is there any posibility that the high voltage lines make my radio cards work wrong???
regards
by pastranini
Sat Jul 05, 2008 7:17 pm
Forum: Wireless Networking
Topic: MY WLAN IS BLIND ¡¡¡¡¡
Replies: 5
Views: 1520

MY WLAN IS BLIND ¡¡¡¡¡

Hello, I have a problem, this is my equipmet: rb133, emp8601, 12dbo omni, barrel NM-NM This AP had been working excelentt until the day before yesteday, It were raining all day long, at next day i went to check the ap and it weren´t wet, all was ok, but the clients had a very bad signal and doesnt h...
by pastranini
Thu May 22, 2008 6:44 pm
Forum: General
Topic: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡
Replies: 4
Views: 912

Re: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡

BUT WHEN THIS WORKS I'LL MAKE IT WITH THE 3 ADLS IN MY OFFICE.
THANKS.
by pastranini
Thu May 22, 2008 6:41 pm
Forum: General
Topic: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡
Replies: 4
Views: 912

Re: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡

Chupaka Post subject: Re: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡ show us 'ip->addresses'. what are 192.168.1.1 and 192.168.2.1? Hello Chupaka i post you a new picture you can understand me better. raktim Post subject: Re: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡ make unknown interface to known........ I wrote in the ...
by pastranini
Wed May 21, 2008 7:12 pm
Forum: General
Topic: ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡
Replies: 4
Views: 912

ONLY 2 GATEWAYS WORK ¡¡¡¡¡¡¡¡¡

Hello, I am trying to use load balance with 3 Gateways, all packets work good in mangle, you can see it in the below image.But when i make a speedtest, only 2 Gateways work. I did all the wiki says, i was looking in this forum but, i couldn´t find the answer.
helpppp,
by pastranini
Mon May 12, 2008 7:28 am
Forum: General
Topic: LOAD BALANCING WITH 3 GW AND FAILOVER
Replies: 8
Views: 2296

Re: LOAD BALANCING WITH 3 GW AND FAILOVER

Hello this is the conf. Flags: X - disabled, I - invalid, D - dynamic 0 chain=prerouting in-interface=wlan1 connection-state=new nth=2,4,0 action=mark-connection new-connection-mark=PARCONN passthrough=yes 1 chain=prerouting in-interface=wlan1 connection-mark=PARCONN action=mark-routing new-routing-...
by pastranini
Fri May 09, 2008 7:57 pm
Forum: General
Topic: LOAD BALANCING WITH 3 GW AND FAILOVER
Replies: 8
Views: 2296

Re: LOAD BALANCING WITH 3 GW AND FAILOVER

HElloo

this post has 91 views but anybody aswer it.

:S

help¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡
Normis Please.
by pastranini
Mon May 05, 2008 7:52 pm
Forum: General
Topic: VPN WITH DDNS
Replies: 4
Views: 1015

Re: VPN WITH DDNS

YEAPPP, i GOT ITTTT,
THANKS A LOT
YOU'RE RESOLVED MY PROBLEM.
by pastranini
Sat May 03, 2008 2:02 pm
Forum: General
Topic: LOAD BALANCING WITH 3 GW AND FAILOVER
Replies: 8
Views: 2296

LOAD BALANCING WITH 3 GW AND FAILOVER

Hello Everybody I tried to make load balancing with 3 gateways and failover, i got mix up in ip route, how would be the correct configuration? this is with 2 / ip route add dst-address=0.0.0.0/0 gateway=10.111.0.1 scope=255 target-scope=10 routing-mark=odd check-gateway=ping add dst-address=0.0.0.0/...
by pastranini
Fri May 02, 2008 12:40 am
Forum: General
Topic: VPN WITH DDNS
Replies: 4
Views: 1015

Re: VPN WITH DDNS

Hello, thanks, but can you explain me what means pip.changeip.com??? or better ,what must I to set instead of pip.changeip.com???

and connect-to is this the same that server-address in L2tp-client???
regards
by pastranini
Tue Apr 29, 2008 12:01 am
Forum: General
Topic: VPN WITH DDNS
Replies: 4
Views: 1015

VPN WITH DDNS

Hello. I have set a vpn server with l2tp and with a dinamic ip given by my isp, i registered the domain in changeip. When i try to set the vpn client , in connect-to i set the domain and automatically turns to numbers,user and pass, and the link works great. But i Know when the link will down, i mus...
by pastranini
Tue Mar 25, 2008 8:20 am
Forum: Beginner Basics
Topic: how can I do QoS thing?
Replies: 11
Views: 2389

Re: how can I do QoS thing?

You can start to build a QoS' structure by making mangle rules, after that make queue trees or simple queues, perhaps you can improve your knowlegde about the behavior of the MT
regards
by pastranini
Tue Mar 25, 2008 8:12 am
Forum: Beginner Basics
Topic: what ports are open
Replies: 2
Views: 1054

Re: what ports are open

You can open ports in NAT, dstnat chain
by pastranini
Thu Feb 21, 2008 8:37 am
Forum: Wireless Networking
Topic: 133c Prblem
Replies: 3
Views: 1015

Re: 133c Prblem

Try to use the neighbor viewer, this little program will show you the mac address of the rb.
by pastranini
Wed Feb 06, 2008 7:52 pm
Forum: General
Topic: Advice on VPN's
Replies: 2
Views: 726

Re: Advice on VPN's

Hello,

Must you to put all the nodes in the same subnet as the server in the main office? are you sure with this???
i have a network more less like you want to make it.
add my msn and i will try to be helpfully for you
sistemas_elroble@hotmail.com
by pastranini
Mon Jan 28, 2008 8:56 pm
Forum: Wireless Networking
Topic: ACK TIMEOUT
Replies: 15
Views: 7436

Re: ACK TIMEOUT

Hi
alexandrecorrea
i set my AP with less power from 26dbm to 23dbm, and it's working better that when was at 26dbm.

Try changing that value JWCN told you.
Regards
by pastranini
Thu Jan 24, 2008 8:39 pm
Forum: Wireless Networking
Topic: ACK TIMEOUT
Replies: 15
Views: 7436

Re: ACK TIMEOUT

Hello, Im using rb133c into a 15dbi rootena, nmp-8602, in another clients rb133 all is on 2.4
In Ap I using rb532A with 400mw EMP-8602, 3 sec 120deg ant .
What is the recommended power for those?
by pastranini
Wed Jan 23, 2008 9:39 pm
Forum: Wireless Networking
Topic: ACK TIMEOUT
Replies: 15
Views: 7436

Re: ACK TIMEOUT

Hello, JWCN, I had already decreased the power from some client's but the problem was there, so i changed the acktimeout value to 56, all links were working good yesterday , but today 2 clients are connecting and disconnecting, their links fall down every 3 or 5 mins. <mac>@wlan1:desconnected, reass...
by pastranini
Tue Jan 22, 2008 6:36 pm
Forum: Wireless Networking
Topic: ACK TIMEOUT
Replies: 15
Views: 7436

Re: ACK TIMEOUT

Yeap, the acktimeout is depending on the distance, i have links no more 5 km, at now my ap is working good. I wait all day long in order to check the ap.
Thanks a lot
by pastranini
Tue Jan 22, 2008 9:02 am
Forum: Wireless Networking
Topic: ACK TIMEOUT
Replies: 15
Views: 7436

Re: ACK TIMEOUT

Hello, thanks for your advice, my radio is NMP-8602 PLUS, Should I put a better card instead of this card?? I read the manual, and the datasheet of the card, I LOOKED A CLIENT UP WITH WEEK SIGNAL, ITS LINK IS 3KM, ALSO WHEN UNAUTHORIZED CLIENTS ARE TRYING TO CONNECT WITH MY AP THIS VALUE GOES TO THE...
by pastranini
Tue Jan 22, 2008 1:29 am
Forum: Wireless Networking
Topic: ACK TIMEOUT
Replies: 15
Views: 7436

ACK TIMEOUT

HEllo all, i have been taking a problem with the clients, the signal is well for all -55 -72 , but in hours between 4 and 6pm the acktimeout is higher than 100 moreless 200 and 308. i've read a post where using a script, this script check this value and if the value is higher than 100, search for an...
by pastranini
Tue Jan 15, 2008 2:54 am
Forum: Wireless Networking
Topic: PROBLEM WITH PPPOE IN WLAN
Replies: 2
Views: 760

PROBLEM WITH PPPOE IN WLAN

Hello everybody, I have a problem with my pppoe wireless clients,they cant open some URLs, like Hotmail, batanga and the MSN. It was working good. this is my conf. RB153, In Eth1 = pppoe in order to connect with my ADSL. eth2= go out with utp cable to a RB530 in my tower. rb153 (eth1) = PPPoE client...
by pastranini
Sat Jan 05, 2008 2:10 am
Forum: General
Topic: VPN with Cctv
Replies: 1
Views: 1140

VPN with Cctv

Hello everybody, Recently, i installed an CCTV tecnology, and I have been trying to pass the video through a VPN with Mk but i cant do it, I set a Nat rule where i sent all the traffic with port 911-912 that cctv use to the pc where i installed the cctv card. If is another problem let me know it. Th...
by pastranini
Tue Jan 01, 2008 9:50 pm
Forum: Beginner Basics
Topic: Disable HOTSPOT
Replies: 1
Views: 4362

Re: Disable HOTSPOT

hELLO, you can use dhcp-server with hotSpot , if you want that your customer login by mac-address, you can set in /hotspot/user put your customer mac address without pass. and also you can add arp for your dhcpserver clients. Check that, and tell us.
regards

tell us if this is useful for you...
by pastranini
Tue Jan 01, 2008 9:38 pm
Forum: Beginner Basics
Topic: Hiding Public IP
Replies: 4
Views: 1443

Re: Hiding Public IP

you try to tell us that your customers cant see your ip public???? when they enter to e.g. whatisyourip.com