Community discussions

MikroTik App

Search found 126 matches

by dang21000
Tue Feb 11, 2025 9:30 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Still no way to have two sub-windows opened with the filter and the raw table... still need to switch between tabs.
I've just discover the option to hide tabs... what is the interest ?
by dang21000
Tue Feb 11, 2025 8:57 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

v4 Menu on the right, v3 Tabs on top...
v3 is more clear.
Like all others softwares.... tabs are always on the top.
by dang21000
Mon Feb 10, 2025 8:59 pm
Forum: General
Topic: Router forget how to route after a 3-4 days of working
Replies: 9
Views: 912

Re: Router forget how to route after a 3-4 days of working

netinstall + reset and don't restore your backup.... use rsc export and recreate it from scratch.
I had similar behavior too on ccr device and do that... and yes, with rsc, not everything is exported, like device-mode, certs, users....
by dang21000
Fri Feb 07, 2025 9:01 pm
Forum: Announcements
Topic: New exciting features for storage
Replies: 60
Views: 4692

Re: New exciting features for storage

Exciting features... ? I don't understand why other networks products, forti, xtrem, cisco do like you ! Minecraft on container on network security gateway... it's a joke ? And during this time, with evolution of routerOS, their more and more constraints about device mode, functions before allowed a...
by dang21000
Wed Feb 05, 2025 7:35 pm
Forum: General
Topic: Configuration issues: VLAN, AP, winbox... [SOLVED]
Replies: 2
Views: 678

Re: Configuration issues: VLAN, AP, winbox... [SOLVED]

If you want access to your mant, it must have an ip addr in vlan 30 and you must have necesary filters rules.

Its better to create a trunk between bots devices, and use the vlan_lan for mgmt for both and let only wireless client on vlan_hotspot
by dang21000
Wed Feb 05, 2025 7:11 pm
Forum: General
Topic: annoying red lines in CapsmanV2 on Winbox4 and 3, must this be?
Replies: 1
Views: 601

Re: annoying red lines in CapsmanV2 on Winbox4 and 3, must this be?

Hi,

Yes, that's horrible to identify, with 12 caps, each dual band and ~15 ssids.... 15x2x12=360 lines on capsman and 15x2 on caps, but on caps, no really usefull.
I hope have a hability in winbox to "group by" any fields.... and not only by "show categories" like in the filter.
by dang21000
Wed Feb 05, 2025 6:56 pm
Forum: General
Topic: What Type of Access Control Policies (RBAC or ABAC or PBAC) is used in Mikrotik System ?
Replies: 1
Views: 564

Re: What Type of Access Control Policies (RBAC or ABAC or PBAC) is used in Mikrotik System ?

Hi,

I've you read this page about RBAC related to user "level/power" in mkt : https://help.mikrotik.com/docs/spaces/R ... 78504/User
It's a very simple rights management, but do the job, for sure, it's very light compared to vcenter...
by dang21000
Sun Feb 02, 2025 10:19 pm
Forum: Beginner Basics
Topic: A simple WAN/LAN/DMZ VLAN config to start off
Replies: 17
Views: 2845

Re: A simple WAN/LAN/DMZ VLAN config to start off

A good thing, is avoid using vlanid 1 when using vlan...
by dang21000
Sat Feb 01, 2025 9:38 am
Forum: Announcements
Topic: v7.17.2 [stable] is released!
Replies: 597
Views: 134006

Re: v7.17.1 [stable] is released!

Just downgraded to 7.17, lot of problem... need to identify and play on lab to understand what happen and be sure it .1 release and not any other stuff.
by dang21000
Fri Jan 31, 2025 3:38 pm
Forum: Announcements
Topic: v7.17.2 [stable] is released!
Replies: 597
Views: 134006

Re: v7.17.1 [stable] is released!

Successfully upgrade main part of 2 RB5009 in prod to 7.17.1.
by dang21000
Sun Jan 26, 2025 10:11 pm
Forum: Beginner Basics
Topic: Adding USB 2,5Gbe ethernet adapter to RB5009UG
Replies: 13
Views: 4506

Re: Adding USB 2,5Gbe ethernet adapter to RB5009UG

maybe for driver reason and because, it's an appliance, a commercial product with it's specs and a limited usb port usage ; this allow mkt hardware/software to be stable and controller

x86 is more open but maybe more unstable due to lot of external factor independant of mkt team.
by dang21000
Fri Jan 24, 2025 10:14 pm
Forum: General
Topic: Unable to Downgrade RouterOS from 7.18beta2 to 7.16.2 on hAP ax3 ARM 64 [SOLVED]
Replies: 10
Views: 2197

Re: Unable to Downgrade RouterOS from 7.18beta2 to 7.16.2 on hAP ax3 ARM 64 [SOLVED]

No problem, i have a lab with rb5009, hex, hap ax3, hap ac3, cap ax and an old crs125 (capricious psu problem i think) if necessary.
by dang21000
Fri Jan 24, 2025 10:01 pm
Forum: General
Topic: Unable to Downgrade RouterOS from 7.18beta2 to 7.16.2 on hAP ax3 ARM 64 [SOLVED]
Replies: 10
Views: 2197

Re: Unable to Downgrade RouterOS from 7.18beta2 to 7.16.2 on hAP ax3 ARM 64 [SOLVED]

success for theses versions changes : 7.17 >> 7.16.2 >> 7.18b2 >> 7.16.2 >> 7.17

In less than 15min, with only routeros+wifi-qcom packages and the last backup restored to avoid problems.
by dang21000
Fri Jan 24, 2025 9:45 pm
Forum: General
Topic: Unable to Downgrade RouterOS from 7.18beta2 to 7.16.2 on hAP ax3 ARM 64 [SOLVED]
Replies: 10
Views: 2197

Re: Unable to Downgrade RouterOS from 7.18beta2 to 7.16.2 on hAP ax3 ARM 64 [SOLVED]

"Rebooted the router: After uploading the .npk file, I rebooted the router." : To downgrade, you don't have to reboot, but click on the specific downgrade button on winbox (system/package) AND you have maybe, to configure the fu...ing device-mode to allow downgrade, if you see a message ab...
by dang21000
Thu Jan 23, 2025 10:13 pm
Forum: General
Topic: hap ax3 random wireless disconnects
Replies: 198
Views: 32531

Re: hap ax3 random wireless disconnects

Since, i've fixed channel width AND create a "fake master hidden ssid" I've no disconnect except roaming on a building with 4 floors and 12 hap ax3 running 7.17. This my capsman cfg : /interface wifi channel add disabled=no name=master_channel width=20/40mhz-Ce add disabled=no name=slave_c...
by dang21000
Thu Jan 23, 2025 7:14 pm
Forum: General
Topic: Disappointing Wireguard Performance [SOLVED]
Replies: 25
Views: 3278

Re: Disappointing Wireguard Performance [SOLVED]

I've already try to set fixed cpu speed and it work well. But what about the life of the rb5009? I'm running at default setting for the cpu speed and trying to think the cause is fasttrack or other any other filter.... Still searching for but no time to spend. In my case, when I can transfer files a...
by dang21000
Wed Jan 22, 2025 10:23 pm
Forum: General
Topic: Disappointing Wireguard Performance [SOLVED]
Replies: 25
Views: 3278

Re: Disappointing Wireguard Performance [SOLVED]

Hi, I've use a WG between two RB5009 with a fiber symetric 1G between two sites. I added the following rules on both sides, here, it's just one, to avoid site2site traffic to be fastracked. ## any site2site IN/OUT with WAN addr (very permissive here, need to bet more filtered) /ip firewall raw add a...
by dang21000
Sun Jan 19, 2025 10:25 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Yes, or just follow the OS system colors and styles...
by dang21000
Sun Jan 19, 2025 5:01 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

hI,

In dark mode, why text is in gray and not white, it's not enough contrasted for some people.
by dang21000
Thu Jan 16, 2025 10:44 pm
Forum: Announcements
Topic: v7.17.2 [stable] is released!
Replies: 597
Views: 134006

Re: v7.17 [stable] is released!

Lot of work on WebUI.
But still no way to easily disable quickset, have an empty user name on login, re-login on page refresh and graphs are still 1998 style instead the webui...
by dang21000
Thu Jan 16, 2025 10:42 pm
Forum: Beginner Basics
Topic: RB450Gx4 Fails to Upgrade from 7.16.2 to 7.17rc: "Insufficient Kernel Space" Error Unseen Online
Replies: 9
Views: 4053

Re: RB450Gx4 Fails to Upgrade from 7.16.2 to 7.17rc: "Insufficient Kernel Space" Error Unseen Online

No good news.... what is your bootloader version ?

The only arm 32 dev i have on the lab hap ac3 and successfully upgrade theses dev to 7.17 (128MB ROM)
by dang21000
Sun Jan 12, 2025 11:49 pm
Forum: Wireless Networking
Topic: CAPSMAN: "create enabled" versus "create dynamic enabled"
Replies: 8
Views: 10305

Re: CAPSMAN: "create enabled" versus "create dynamic enabled"

Hi,

If created in static mode.... when (re)provisionning OR reboot the caps, do they will be removed/flushed and replaced by new like expected by provisionning rules ?
The idea os to avoid having lot of unused interfaces...
by dang21000
Sat Jan 11, 2025 12:17 am
Forum: Announcements
Topic: v7.17rc [testing] is released!
Replies: 408
Views: 147970

Re: v7.17rc [testing] is released!

Just upgraded the lab to rc7 (2x 5009, + 4x ax3 + 1x crs310)... and still working :)
by dang21000
Sat Jan 04, 2025 6:47 pm
Forum: Beginner Basics
Topic: Router on Stick for lab purposes
Replies: 4
Views: 1770

Re: Router on Stick for lab purposes

I prefer use a 5009 for lab and staging.
More interfaces, sfp+ and more power.
by dang21000
Fri Jan 03, 2025 12:20 pm
Forum: Wireless Networking
Topic: Old wap AC's together with new AX
Replies: 9
Views: 2684

Re: Old wap AC's together with new AX

i've choose and other way... replace all AC by AX and sell the AC.
by dang21000
Fri Jan 03, 2025 12:14 pm
Forum: RouterBOARD hardware
Topic: CRS310-8G+2S+IN fan replacment
Replies: 7
Views: 7073

Re: CRS310-8G+2S+IN fan replacment

Hi, i've also replaced all my CRS310 fan by the noctua 4pin.
And set in system heath the minimum speed at 50% to increase airflow.
by dang21000
Thu Jan 02, 2025 9:55 pm
Forum: General
Topic: NTP SERVER AND CLIENT
Replies: 4
Views: 1731

Re: NTP SERVER AND CLIENT

export your config ...

maybe output fw 4/6 rule, maybe dns resolv
by dang21000
Wed Jan 01, 2025 7:47 pm
Forum: General
Topic: FOR THE LOVE OF "DEITY OF CHOICE" FIX YOUR FRIGGEN (forum) WEBSITE [SOLVED]
Replies: 126
Views: 17515

Re: FOR THE LOVE OF "DEITY OF CHOICE" FIX YOUR FRIGGEN (forum) WEBSITE [SOLVED]

Hi,

Yes, there lot of problems with the forum access...
by dang21000
Tue Dec 31, 2024 5:00 pm
Forum: Beginner Basics
Topic: Reset rb5009 and no WAN or DHCP
Replies: 3
Views: 1742

Re: Reset rb5009 and no WAN or DHCP

Read the doc : https://help.mikrotik.com/docs/spaces/ROS/pages/24805498/Reset+Button A thing missing in the doc, is the default configuration for each device... this can be awesome to get them easily. Because this page https://help.mikrotik.com/docs/spaces/ROS/pages/167706788/Default+configurations ...
by dang21000
Sat Dec 28, 2024 1:15 pm
Forum: RouterBOARD hardware
Topic: MikroTik CRS310-8G-2S+-IN Random 2.5G Port Failure
Replies: 3
Views: 4980

Re: MikroTik CRS310-8G-2S+-IN Random 2.5G Port Failure

I've read that this switch is equiped with 2 glued heatsinks and they can also get out due too bad glue and not correct heat dissipation. Can you open the unit and check the heatsink state ? I've few units runnings and this will be the first thing i'll check, mines are all racked, so they don't phys...
by dang21000
Sat Dec 28, 2024 12:49 pm
Forum: Wireless Networking
Topic: Capsman : scheduled provisioning per config
Replies: 6
Views: 2799

Re: Capsman : scheduled provisioning per config

Hi, The goal is simple : totally shutdown wireless AND wired network access when not working hours ; with a easier way to enable/disable wireless AND wired "parts" when needed. For the wired, it's easier , i shut the access port on distribution switches (not mikoritk here). But wireless is...
by dang21000
Sat Dec 28, 2024 1:31 am
Forum: Wireless Networking
Topic: Capsman : scheduled provisioning per config
Replies: 6
Views: 2799

Capsman : scheduled provisioning per config

Hi, I use, like lot of person, capsman to purpose wireless networks. For security reasons I'm asked to stop them at closed hours. And the policy is different for each ssid. I planned to create scripts, scheduled and run on capsman to disable or enable the wifi config. Is it a good idea? Is it the be...
by dang21000
Fri Dec 27, 2024 10:33 pm
Forum: General
Topic: Ip Address print command
Replies: 1
Views: 1176

Re: Ip Address print command

It's just a visual separator...
by dang21000
Thu Dec 26, 2024 10:25 pm
Forum: RouterBOARD hardware
Topic: Mikrotik switch SFP+ port issue on COLD restart
Replies: 20
Views: 16664

Re: Mikrotik switch SFP+ port issue on COLD restart

maybe you can use netwatch tool... ? and launch script by the netwatch ?
I had some SFP problem with CRS326 switches, solved by upgrades and by SFP replacment.
by dang21000
Thu Dec 26, 2024 9:56 pm
Forum: Beginner Basics
Topic: hAP ax^3 2.4G wifi doesn't work
Replies: 31
Views: 5203

Re: hAP ax^3 2.4G wifi doesn't work

I've a site with 4 hap ax3 under capsman running wap2/wap3 psk without problem on 2.4 and 5GHz bands.
With AX devices, i've resolved all my issues by settings channels with do 20/40MHz...
by dang21000
Wed Dec 25, 2024 10:00 pm
Forum: General
Topic: hap ax3 random wireless disconnects
Replies: 198
Views: 32531

Re: hap ax3 random wireless disconnects

Hi, With lot of AX devices, i've found (capsman mode) a way to have a fully working without any random disconnect. The way is simple, create a master hidden ssid with channel config and a long passkey and have all others ssid as slaves. ## CHANNEL CFG /interface wifi channel add disabled=no name=mas...
by dang21000
Wed Dec 25, 2024 7:03 pm
Forum: Wireless Networking
Topic: HAP ax3 : still support 2.4G standard B or not ?
Replies: 8
Views: 2126

Re: HAP ax3 : still support 2.4G standard B or not ?

Hi,

I've set my country to France.
And the radio info for wifi2 of the ax3 say :
  • 2GHz G:20MHz
    2GHz N:20MHz 20/40MHz
    2GHz AX:20MHz 20/40MHz
So no B here.... i think the product spec must be updated.
by dang21000
Wed Dec 25, 2024 12:51 pm
Forum: Wireless Networking
Topic: HAP ax3 : still support 2.4G standard B or not ?
Replies: 8
Views: 2126

Re: HAP ax3 : still support 2.4G standard B or not ?

Hi, Yes for sure, the legacy network will be on separated slave interface, not on master. But nothing found by theses devices. Because it's a temporary setup, i've get 2 linksys wrt54g able to create B only network with poor WEP/WPA sec. And i'm sure HAP ax3 is not B compatible (understandable) beca...
by dang21000
Wed Dec 25, 2024 12:29 pm
Forum: Beginner Basics
Topic: Adding USB 2,5Gbe ethernet adapter to RB5009UG
Replies: 13
Views: 4506

Re: Adding USB 2,5Gbe ethernet adapter to RB5009UG

I think it's better, expensive yes, but more powerfull to add a crs310 connected by sfp+ between rb/crs
by dang21000
Mon Dec 23, 2024 11:48 pm
Forum: Wireless Networking
Topic: HAP ax3 : still support 2.4G standard B or not ?
Replies: 8
Views: 2126

HAP ax3 : still support 2.4G standard B or not ?

Hi, For use very very very very old devices, i need to create a wireless network on band 2.4G but with B standard (11Mbits/s). But, i've a problem to select the correct band, there only the old G standard. Like documented in the specs of HAP ax3... https://mikrotik.com/product/hap_ax3 it's say it's ...
by dang21000
Sun Dec 22, 2024 12:31 am
Forum: Wireless Networking
Topic: RSMB vs RMB
Replies: 2
Views: 2000

Re: RSMB vs RMB

I've more than 20/25 ac3 still running in 7.16.2.
All are configured as standalone, not capsman here.

i've check 5 devices, and all the wifi master int (wifi1@2g/wifi2@5g) are all in RMB.
by dang21000
Thu Dec 19, 2024 12:16 am
Forum: General
Topic: Strange slow RX but not TX
Replies: 26
Views: 6550

Re: Strange slow RX but not TX

Tu as quelle freebox ?
configurée en routeur ou pas ?
Si routeur, as tu mis en œuvre la délégation des prefix ipv6?
by dang21000
Thu Dec 19, 2024 12:12 am
Forum: General
Topic: Mikrotik Reset Password Without Loosing Configurations
Replies: 7
Views: 1793

Re: Mikrotik Reset Password Without Loosing Configurations

Yes hacked system, for sure. At this time I've no problem identified. Always have a script that can with ssh/scp do export (with sensitive content) AND backup regularly. backup for easier restore and export for manual line by line restore/troubleshooting. This has save me since fews years ago. I've ...
by dang21000
Wed Dec 18, 2024 11:00 pm
Forum: RouterBOARD hardware
Topic: switches for RB5009 [SOLVED]
Replies: 4
Views: 3541

Re: switches for RB5009 [SOLVED]

Benchmark is impossible and complicated In this case, RB5009 act as routing with lot of differents operators/ISP and speeds. The 10G connection between RB/CRS is just here to avoid losing eth@1gig and because i had a lot of 10GB sfp. All theses remotes sites are connected with a WG site2site between...
by dang21000
Wed Dec 18, 2024 10:38 pm
Forum: General
Topic: Route traffic behind double NAT
Replies: 14
Views: 2007

Re: Route traffic behind double NAT

I've the same setup in personnal usage. Both are behind a french ISP box, acting as router with 1 ipv4 addr and allow 8 ipv6 subnet to be "prefix delegation". For ipv4, "dmz" is set to the "wan" mkt addr and, it's a classic setup with nat masquerade, etc..., it's just F...
by dang21000
Wed Dec 18, 2024 4:24 pm
Forum: RouterBOARD hardware
Topic: 5009 version with wifi ?
Replies: 63
Views: 7669

Re: 5009 version with wifi ?

I think, it's better to have separated roles.... RB must only be wired router.
CRS for wired switching and HAP for wireless.

Maybe a newer RB with all ports @ 2.5G and a second SFP insteed useless USB.

And a real standard POE IN @ 48v
by dang21000
Wed Dec 18, 2024 3:57 pm
Forum: RouterBOARD hardware
Topic: switches for RB5009 [SOLVED]
Replies: 4
Views: 3541

Re: switches for RB5009 [SOLVED]

I use CRS310 8G connected with fiber SFP+@10G in small remote sites, and for biggers, i use CRS326.
by dang21000
Tue Dec 17, 2024 11:54 pm
Forum: Wireless Networking
Topic: Provisioning not respecting name-format setting when provisioning local interfaces
Replies: 8
Views: 6578

Re: Provisioning not respecting name-format setting when provisioning local interfaces

Hi,

Or just, the config profile applied, as a "%" var for naming....
That hard to debug, cross info between capsman and few caps... ouch !

I don't understand why, on capsman are named with provisionning naming patterns and this name is not used on caps. There no sense
by dang21000
Mon Dec 16, 2024 7:26 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Like logs, see vlans ports members are hard ; long line content must be more readable.
by dang21000
Mon Dec 09, 2024 9:54 pm
Forum: General
Topic: Unable to restore bin backup file to AC2 [SOLVED]
Replies: 5
Views: 1576

Re: Unable to restore bin backup file to AC2 [SOLVED]

HI, For this main reason about the ridiculous 16MB flash, i avoid theses. And for backup config, i always theses two commands and after, trough scp, i get theses files : [*] /system/backup/save dont-encrypt=yes name=xxx.backup [*] /export show-sensitive file=xxx.rsc This allow with the .backup to re...
by dang21000
Mon Dec 09, 2024 9:37 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

And logs are still unreadable due to the online format

Why theme don't simple use the OS default interface ...? like all apps
by dang21000
Tue Dec 03, 2024 11:04 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

After few hours of use this b12 to manage multiples devices at the same time on a laptop (14p full hd), the right-bar lost lot of display content/space compared to 3.4x. And its worst when comparing two dev by puting 2 winbox side2side. And if toggling theses 2 winbox up/down mode, its hard with lon...
by dang21000
Tue Dec 03, 2024 10:55 pm
Forum: RouterBOARD hardware
Topic: Switch in RB509/L009 FormFactor
Replies: 20
Views: 5136

Re: Product idea: switch in RB5009 form factor

Yes, this can a real good product/idea/serie.
I've already deployed in some far sites, one rb5009 and a crs310 both on a shelf on the small rack.
An other good idea, is a PSU with this format with multiple output, like 4/6 outputs 24V/48V @ 2A each
by dang21000
Fri Nov 22, 2024 11:07 pm
Forum: Announcements
Topic: v7.17rc [testing] is released!
Replies: 408
Views: 147970

Re: v7.17rc [testing] is released!

Is it normal on RB5009 to have this value as no ?
                                 
[admmikrotik@router70a] > /system/device-mode/print 
                 mode: advanced     
           ......
          routerboard: no           
by dang21000
Fri Nov 22, 2024 11:00 pm
Forum: Announcements
Topic: v7.17rc [testing] is released!
Replies: 408
Views: 147970

Re: v7.17rc [testing] is released!

WebUI is nice.
Dark mode is pleanned ?

/graphs need a relooking too.
by dang21000
Wed Nov 20, 2024 10:09 pm
Forum: RouterBOARD hardware
Topic: Connect AX2/AX3/AC2/AC3 devices by eth1 poe-in@24V to a switch poe-out@48V
Replies: 4
Views: 2900

Re: Connect AX2/AX3/AC2/AC3 devices by eth1 poe-in@24V to a switch poe-out@48V

Thank you, for your answer, i've still not choose furthers switches, i don't know if i'll buy mkt or other brand dev.
by dang21000
Thu Nov 14, 2024 8:36 pm
Forum: RouterBOARD hardware
Topic: Connect AX2/AX3/AC2/AC3 devices by eth1 poe-in@24V to a switch poe-out@48V
Replies: 4
Views: 2900

Re: Connect AX2/AX3/AC2/AC3 devices by eth1 poe-in@24V to a switch poe-out@48V

Thank you for your answer.... so it's less expansive to use dedicated non-poe switches for mkt devices and poe for the other devs
by dang21000
Thu Nov 14, 2024 8:25 pm
Forum: General
Topic: How to flush the default firewall [SOLVED]
Replies: 6
Views: 930

Re: How to flush the default firewall [SOLVED]

I'use theses commands to bootstrap every rb5009 i deploy ; the goal is to remove everything and have a dedicated outofband eth for mgmt (and this one is securised after). And now, i lost a time with the fuc___g default password. After that, i use the newly created outofband mgmt port and inject the ...
by dang21000
Wed Nov 13, 2024 9:07 pm
Forum: RouterBOARD hardware
Topic: Connect AX2/AX3/AC2/AC3 devices by eth1 poe-in@24V to a switch poe-out@48V
Replies: 4
Views: 2900

Connect AX2/AX3/AC2/AC3 devices by eth1 poe-in@24V to a switch poe-out@48V

Hi,

I've to replace some distribution switches with connected AX2/AX3/AC2/AC3 from their eth1 (poe-in@24V capable).
At this time, all theses HAP are powered by external PSU.

What happen if they are connected to switches that deliver poe-out@48V (standard).... ?
They'll burn in fire ?
by dang21000
Mon Nov 11, 2024 10:44 pm
Forum: RouterBOARD hardware
Topic: RB951Ui-2HnD port Running (R- flag) without cable connected to it
Replies: 5
Views: 2469

Re: RB951Ui-2HnD port Running (R- flag) without cable connected to it

try clean contact with alcohol... but maybe it's time to change
by dang21000
Thu Nov 07, 2024 11:18 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Theses menus are too big... we have to move too much for same thing than in v3x...
by dang21000
Thu Oct 31, 2024 10:42 pm
Forum: RouterBOARD hardware
Topic: Hap AX3 as an access point
Replies: 15
Views: 3919

Re: Hap AX3 as an access point

I've similar setup in multiples sites : RB5009 as main router and AX3/AX2 and/or AC3/AC2.

But no capsman at this time due to AC doesn't support vlan from datapath since v7.14 ; so it's more easier to handle manual cfg for all ap models manualy, AC replacment is planned for next year.
by dang21000
Sat Oct 26, 2024 8:30 pm
Forum: RouterBOARD hardware
Topic: is 5009 the right choice for me? 1.5 WAN inbound and 10 Gb LAN connection
Replies: 1
Views: 2564

Re: is 5009 the right choice for me? 1.5 WAN inbound and 10 Gb LAN connection

Hi, I've a similar setup. 5G/1G fiber connection, with a operator box (freebox pop in france) with 2.5G interface, so directly on the eth1. My lan's are on the other rb5009 ports, AP are trunked and access mode for the other legaxy parts. I'm plannng to upgrade the operator by upgrading my offer and...
by dang21000
Fri Oct 25, 2024 11:40 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Yes, tabs are the best than lot of collapse
by dang21000
Wed Oct 16, 2024 10:21 pm
Forum: Beginner Basics
Topic: How to install new Winbox beta on Linux
Replies: 19
Views: 4538

Re: How to install new Winbox beta on Linux

just download it from mkt website, unzip and run the binary.
by dang21000
Tue Oct 15, 2024 9:20 pm
Forum: RouterBOARD hardware
Topic: New to MikroTik - Choosing between a RB4011 (WiFi), RB5009 + AP and a hAP AX3
Replies: 12
Views: 4312

Re: New to MikroTik - Choosing between a RB4011 (WiFi), RB5009 + AP and a hAP AX3

For me, USB port for storage is useless, it's not necessary for mkt devices, it's a feature like a box in recycled stuff. Not necessary for most uses cases. Good routing/firewall performance with wan at more than 2/3 GBits/s for dual stack ipv4/ipv6, use the RB5009. If you plan to use more internals...
by dang21000
Tue Oct 15, 2024 4:24 pm
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 180205

Re: v7.17beta [testing] is released!

The main problem is not the new advanced/enterprise device mode.
But the change confirmation by button press/power lost.

Security reason ? remotely we can change/break everything else... but not that ?
by dang21000
Mon Oct 14, 2024 9:58 pm
Forum: Wireless Networking
Topic: security wpa2 and wpa3 psk : how to know wich one is used per clients ?
Replies: 14
Views: 2466

Re: security wpa2 and wpa3 psk : how to know wich one is used per clients ?

Hi,

I've just tested the beta 2 of 7.17, it work like a charm on a lab hapax3.
It's easy to identified the auth method used by stations.

I'll planned wpa2-psk "progressive kill" fews weeks after 7.17 release.

Thank you every one.
by dang21000
Mon Oct 14, 2024 9:13 pm
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 180205

Re: v7.17beta [testing] is released!

You're right, i've not see this part in doc ; but read in the next section : List of available properties (table) "container, fetch, scheduler, traffic-gen, ipsec, pptp, smb, l2tp, proxy, sniffer, zerotier, bandwidth-test, email, hotspot, romon, socks, partitions, downgrade, bootloader. (yes | ...
by dang21000
Mon Oct 14, 2024 8:32 pm
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 180205

Re: v7.17beta [testing] is released!

Bug with device-mode and switch between partitions. Like expected in doc (https://help.mikrotik.com/docs/display/ROS/Device-mode) advanced mode should have partition to yes. [admmikrotik@ap70a] > /partitions/activate part0 failure: not allowed by device-mode [admmikrotik@ap70a] > /partitions/print F...
by dang21000
Mon Oct 14, 2024 7:17 pm
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 180205

Re: v7.17beta [testing] is released!

Does the vlan interface list assignment in bridge can help the new behavior with qcomac driver that doesn't support vlan in data path..?
by dang21000
Mon Oct 14, 2024 12:26 pm
Forum: Wireless Networking
Topic: security wpa2 and wpa3 psk : how to know wich one is used per clients ?
Replies: 14
Views: 2466

Re: security wpa2 and wpa3 psk : how to know wich one is used per clients ?

It's for this reason i'm search the stations count per auth method.
by dang21000
Mon Oct 14, 2024 11:56 am
Forum: Wireless Networking
Topic: security wpa2 and wpa3 psk : how to know wich one is used per clients ?
Replies: 14
Views: 2466

Re: security wpa2 and wpa3 psk : how to know wich one is used per clients ?

Yes, it's necessary to have a count usage of wpa2 to ensure i'll not lost clients... removing wpa2 must be done with clients, communication, planned date, etc...
by dang21000
Mon Oct 14, 2024 10:50 am
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 180205

Re: v7.17beta [testing] is released!

bridge - added interface-list support for VLAN : the best features!!!!

This will simplify VLAN tables!thank you mikrotik.
by dang21000
Mon Oct 14, 2024 10:41 am
Forum: Wireless Networking
Topic: security wpa2 and wpa3 psk : how to know wich one is used per clients ?
Replies: 14
Views: 2466

Re: security wpa2 and wpa3 psk : how to know wich one is used per clients ?

Hi, Thank you for all your replies. I Don't want drugs... You're stupid or what? I manage lot of ap and ssid with thousands maybe more stations. wpa2 is used for legacy and I just want to identify an count during a month more/less the amount of clients still using wpa2. The goal is to to only use wp...
by dang21000
Sun Oct 13, 2024 10:58 pm
Forum: RouterBOARD hardware
Topic: Which 8 port fanless switch?
Replies: 10
Views: 3846

Re: Which 8 port fanless switch?

I've ordered 2 units of CRS310 8G 2S. I also replaced by SFP+ BaseT adapter for SFP+ SR, heat is reduced in theses switches and for RB5009.

And yes, the integrated fan isn't quiet. I've replaced theses by noctua NF-A4x20 PWM for less tha 15€/fan.
Fater that, noise is really reduced for few euros.
by dang21000
Sun Oct 13, 2024 10:36 pm
Forum: Wireless Networking
Topic: security wpa2 and wpa3 psk : how to know wich one is used per clients ?
Replies: 14
Views: 2466

security wpa2 and wpa3 psk : how to know wich one is used per clients ?

Hi, I've setup my security profile for use passphrase. I enable both wpa2 and wpa3 psk like this : /interface wifi security set .... authentication-types=wpa2-psk,wpa3-psk passphrase="Bienvenue" I If i see registered clients in the "/interface/wifi/registration-table", how to kno...
by dang21000
Sun Oct 13, 2024 6:41 pm
Forum: Beginner Basics
Topic: Firmware version discrepancy
Replies: 6
Views: 1491

Re: Firmware version discrepancy

I think it's a good idea to set "/system routerboard settings set auto-upgrade=yes" for more automation on upgrade process.
by dang21000
Wed Oct 09, 2024 9:12 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Feature request : add connection to the device status... and don't close immediately winbox when connection is lost between winbox and device.
by dang21000
Mon Oct 07, 2024 9:47 pm
Forum: General
Topic: Max mikrotik uptime limit
Replies: 6
Views: 649

Re: Max mikrotik uptime limit

Linux is not a problem for stability.
But systems must be often tested to ensure their working like expected ; Each months i switchover/switchback or following case, takeover/getback systems. This prevent bad surprise when a real problem appear.
by dang21000
Sun Oct 06, 2024 8:16 pm
Forum: General
Topic: Wireguard Performance (Validate config)
Replies: 2
Views: 714

Re: Wireguard Performance (Validate config)

Hi, I use 2 RB5009 units for WG site2site and roadwarrior. I have to put this tu prevent wg traffic be not fastracked... and now i've about 200/300 Mbits/s between both sites. example only for one side : /ip firewall raw add action=accept chain=prerouting comment="remote prevent fasttrack"...
by dang21000
Sat Oct 05, 2024 1:02 am
Forum: General
Topic: Max mikrotik uptime limit
Replies: 6
Views: 649

Re: Max mikrotik uptime limit

I never get too long uptime, because i've manually scheduled systems reboot and switch between master/slave units to ensure everything is working like expected.
by dang21000
Sat Oct 05, 2024 12:51 am
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Features Request : In interfaces window : * add one tab per interfaces type, at this time there only a limited type, no ipipv6, no gre6, no eoip6 tab * separate interfaces lists in a separate window, like done with switch content now splitted in 4 menus/4window * separate detect-internet feature in ...
by dang21000
Sat Oct 05, 2024 12:35 am
Forum: Beginner Basics
Topic: Router configuration
Replies: 8
Views: 1341

Re: Router configuration

You can use every Mikrotik product running RouterOS. interfaces speed ? interface type ? vlan usage ? routing protocols ? routing speed required ? nat speed required ? poe, no poe ? wifi integrated, no wifi integrated ? want lot of firewalling rules ? handle ipv4 and/or ipv6 ? vpn site2site ? vpn ro...
by dang21000
Fri Oct 04, 2024 7:50 pm
Forum: Beginner Basics
Topic: Switching Device-Mode remotely.
Replies: 3
Views: 1138

Re: Switching Device-Mode remotely.

Hi, Yes i agree, it's not acceptable to ask customer press a fu... buttton to manage device. It's a pseudo/fake security reason from mikrotik. Imagine with the new device mode coming in 7.17 if a feature must be toggle state for get all needed function like before this future upgrade. So, i have ena...
by dang21000
Thu Oct 03, 2024 9:01 pm
Forum: Announcements
Topic: v7.17beta [testing] is released!
Replies: 773
Views: 180205

Re: v7.17beta [testing] is released!

This is a fu__ng function the need to press a button to manage device mode features.
It's very fun with remote site at fews hundreds/thousands kilometers.

How this new device mode will be handled with upgrade/downgrade OR partitions switch with differents versions ?
by dang21000
Wed Sep 25, 2024 8:31 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Features request : make log message display as a "textarea" instead a long, very long line...
by dang21000
Tue Sep 24, 2024 11:01 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Is it planned to manage multiple devices on the same window with tabs (one dev per tab, like firefox) ?
by dang21000
Sat Sep 07, 2024 7:15 pm
Forum: General
Topic: Untagged VLAN1, tagged VLAN10 and untagged VLAN10 on the same bonding interface
Replies: 6
Views: 831

Re: Untagged VLAN1, tagged VLAN10 and untagged VLAN10 on the same bonding interface

And interface can have multiple tagged vlan and ONLY ONE untagged vlan.
by dang21000
Sun Sep 01, 2024 8:03 pm
Forum: RouterBOARD hardware
Topic: HAP AC3 vs AX3 Wifi
Replies: 5
Views: 5933

Re: HAP AC3 vs AX3 Wifi

An other most problematic between AC and AX is there order for wifi interface 2 znd 5 ghz.

I must maintain 2 bootstraps conf for both generations AC and AX devices.
by dang21000
Sun Sep 01, 2024 11:11 am
Forum: RouterBOARD hardware
Topic: HAP AC3 vs AX3 Wifi
Replies: 5
Views: 5933

Re: HAP AC3 vs AX3 Wifi

If you use CAPsMAN, the main difference is the datapath config.
AC3/2 don't support VLANID from datapath
AX3/2 support VLANID from datapath

I'm planned to replace all my AC devices with AX for easier config management.
by dang21000
Sun Sep 01, 2024 11:07 am
Forum: RouterBOARD hardware
Topic: HAP AX3 Using SMA Cables for antennas
Replies: 3
Views: 6207

Re: HAP AX3 Using SMA Cables for antennas

Hi,
I've already setup AC3 with SMA extension cable, but not 3m, juste 1m. No problem since few years now.
by dang21000
Thu Aug 29, 2024 9:06 pm
Forum: Announcements
Topic: 📣 WinBox 4 is here 📣
Replies: 1917
Views: 616812

Re: 📣 WinBox 4 is here 📣

Very nice ! Design is beautiful.

Can you add :
* the escape key behavior like v3x
* more options from right click
* confirmation for delete with the bottom button on the list, like the one at the left of a element box
* a way to enable only when necessary the drag/drop to prevent wrong actions
by dang21000
Wed Aug 21, 2024 6:29 pm
Forum: Announcements
Topic: v7.15.3 [stable] is released!
Replies: 649
Views: 274296

Re: v7.15.3 [stable] is released!

Thank you
by dang21000
Tue Aug 20, 2024 9:59 pm
Forum: Announcements
Topic: v7.15.3 [stable] is released!
Replies: 649
Views: 274296

Re: v7.15.3 [stable] is released!

Hi, Strange thing on 7.15.3 with user active and logout. Here, user "promtheus" via unknow must be "rest-api" ; display well on 7.16rc2. But no way to request logout with always this error. [admmikrotik@router50] > /user/active/print Columns: WHEN, NAME, ADDRESS, VIA # WHEN NAME ...
by dang21000
Fri Aug 16, 2024 10:21 pm
Forum: General
Topic: IPv6 WAN to LAN block rule stops traffic. [SOLVED]
Replies: 3
Views: 2616

Re: IPv6 WAN to LAN block rule stops traffic. [SOLVED]

Maybe because you kill icmp traffic... and without icmp, nothing work.
by dang21000
Thu Aug 15, 2024 9:19 pm
Forum: Beginner Basics
Topic: How to separate dual wan to gaming and browsing mikrotik v7.8
Replies: 4
Views: 2010

Re: How to separate dual wan to gaming and browsing mikrotik v7.8

The most complicated is identify and maintain a list of destination for gaming. Technicaly, it's Rules Routing (PBR) and routeros has no problem to do that. An other approach can be use the desination port 80/443tcp to mark-route them and add a routing rules that call a specific routing tables to us...
by dang21000
Wed Aug 14, 2024 11:30 pm
Forum: General
Topic: SSH daemon causing high CPU load since RouterOS upgrade > 7.15
Replies: 4
Views: 1257

Re: SSH daemon causing high CPU load since RouterOS upgrade > 7.15

Hi,


Try to regenerate your SSH host keys in rsa/2k.

I've had some strangers behaviors on a hap ac3 with rsa/4k and with rsa/8k on RB5009.
But at this time i was running 7.10, maybe 7.11... i don't remember.

At this time, i've switched to ed25519 since 7.15 and don't see any problem.
by dang21000
Wed Aug 14, 2024 11:08 pm
Forum: Scripting
Topic: DHCPv4 server, script run failed randomly
Replies: 1
Views: 2079

DHCPv4 server, script run failed randomly

Hi, I've create the following script used to populate DNS server with DHCPv4 leases, it's very simple and work well. It simple remove all previous DNS entries (identified by a comment) and for each leases, create one type A with ipaddr. DHCPv4 server instance is configured with this command in the s...
by dang21000
Wed Aug 14, 2024 10:14 pm
Forum: General
Topic: HapAx3
Replies: 3
Views: 754

Re: HapAx3

Take the time to read and understand the doc about bridging and spanning tree. I've just do this few days ago because, like you i don't understood what's happened too. After reading everything, i've set STP like recommanded for my setup, bridge priority, set few bridge port's parameters and enable M...
by dang21000
Wed Aug 07, 2024 9:17 pm
Forum: General
Topic: hap ax3 random wireless disconnects
Replies: 198
Views: 32531

Re: hap ax3 random wireless disconnects

Hi,

I only use my HAPax3 device as AP, not router.
Since 2/3 weeks, i've removed wpa3 (before wap2 and wp3 were allowed) from security profiles, no more problems.
by dang21000
Wed Aug 07, 2024 7:38 pm
Forum: Announcements
Topic: v7.16rc [testing] is released!
Replies: 362
Views: 124418

Re: v7.16rc [testing] is released!

Disabling a entry in /ip/dns/addlist don't freeup dns cache size. I'm running rc1 on two rb5009. [admmikrotik@router70] /ip/dns> adlist/print Flags: X - disabled 0 url="https://raw.githubusercontent.com/StevenBlack/hosts/master/hosts" ssl-verify=no match-count=317 name-count=161549 [admmik...
by dang21000
Mon Aug 05, 2024 9:39 pm
Forum: General
Topic: Site-2-Site VPN
Replies: 1
Views: 694

Re: Site-2-Site VPN

Hi, I've the same setup. But i've fixed IPv4/IPv6 addresses everywhere. That's not a problem with dyndns (script) or /ip cloud function by mikrotik (it's a dyndns like). I've setup fews wireguard tunnels between each sites like : 1<-->2 2<-->3 3<-->1 So each site has two tunnel and has route for acc...
by dang21000
Sun Aug 04, 2024 8:30 pm
Forum: RouterBOARD hardware
Topic: How to intentionally make cable that will negotiate at 10 mbps?
Replies: 16
Views: 4374

Re: How to intentionally make cable that will negotiate at 10 mbps?

use an old cable cat 3... ? and connect only 2 pairs
by dang21000
Sat Jul 27, 2024 10:25 pm
Forum: RouterBOARD hardware
Topic: Can I use hAP ax3 to power an AP (cAP ax or cAP ac) ?
Replies: 5
Views: 6273

Re: Can I use hAP ax3 to power an AP (cAP ax or cAP ac) ?

Hi, I have similar situation. Mains routers are RB5009 and AP are AX3 and AC3. At this time, no more money to buy mkt switches with a good poe backend. So i use POE injecter (foolow link here) designed to provide 24V and gigabit. This is possible because my trunk links for AP are ETH1 with allow POE...
by dang21000
Mon Jul 22, 2024 10:39 pm
Forum: General
Topic: IPv6 only working within LAN
Replies: 2
Views: 789

Re: IPv6 only working within LAN

Hi

Does your fritzbox allow prefix delegation ?
by dang21000
Fri Jul 19, 2024 10:01 pm
Forum: General
Topic: Looking for a model of a Mikrotik device for NAT
Replies: 5
Views: 753

Re: Looking for a model of a Mikrotik device for NAT

Maybe a server like an R430/R440 with 10GBE cards ? and a mkt licence...
by dang21000
Fri Jul 19, 2024 9:51 pm
Forum: RouterBOARD hardware
Topic: Default password Frustration
Replies: 101
Views: 16138

Re: Default password Frustration

For me, the worst features isn't a random default password, only used for device first init and can be stored in a CMDB.

I HATE the device mode settings why need to press a fucking button... can't be done remotely and easy !!! :oops: :evil:
by dang21000
Thu Jul 18, 2024 10:27 pm
Forum: RouterBOARD hardware
Topic: mikrotik hap ax3 lost default config after netinstall and have poor wifi
Replies: 7
Views: 3489

Re: mikrotik hap ax3 lost default config after netinstall and have poor wifi

Disabling wpa3-psk and use only wpa2-psk is an interesting idea. Let's go and wait fews days....
by dang21000
Thu Jul 18, 2024 3:59 am
Forum: General
Topic: Block 4 websites version 7.14
Replies: 11
Views: 1352

Re: Block 4 websites version 7.14

Create a static dns entry that catch all fb/yt dns name and return 127.0.0.1 I do block dns from lans to wan. Only resolvers is mkt. the only way to bypass is for client use it's own hosts file with real ip. So i added forward deny rules with dst address list that contains identified dns names. I've...
by dang21000
Thu Jul 18, 2024 3:54 am
Forum: General
Topic: Winbox personalization
Replies: 1
Views: 346

Re: Winbox personalization

With Linux and wine, there is a trick for create a fake dark mode.
and yes.... Winbox is less ergonomic than windows 95
by dang21000
Thu Jul 18, 2024 12:16 am
Forum: General
Topic: Wireguard tunnel not working
Replies: 9
Views: 906

Re: Wireguard tunnel not working

Endpoint port configured on client isnt the same in the wireguard1 interface and input filter rule.
And put conf in CODE, it's more easy to read.
by dang21000
Tue Jul 16, 2024 1:46 pm
Forum: General
Topic: hap ax3 random wireless disconnects
Replies: 198
Views: 32531

Re: hap ax3 random wireless disconnects

Hi, same behavior about reselect interval
by dang21000
Mon Jul 15, 2024 11:15 pm
Forum: RouterBOARD hardware
Topic: mikrotik hap ax3 lost default config after netinstall and have poor wifi
Replies: 7
Views: 3489

Re: mikrotik hap ax3 lost default config after netinstall and have poor wifi

Hi, I use 4 HAP devices running 7.15.2 as single (no capsman) access-point ; 2 HAP AX3 and 2 HAP AC3. All use the same config except interface order AND bands. At this time no performances issue with HAP AC3 devices. Under HAP AX3 devices, sometimes wireless disconnect and reconnect after less than ...
by dang21000
Tue Jul 09, 2024 12:24 pm
Forum: RouterBOARD hardware
Topic: Replace FLASH on HAP & HEX with larger capacity
Replies: 10
Views: 8491

Re: Replace FLASH on HAP & HEX with larger capacity

With a hotgun soldering station, it can be easy to replace the chip
by dang21000
Mon Jul 08, 2024 4:48 pm
Forum: General
Topic: Winbox feature request: ICMP/Port Knocking for administrative access
Replies: 25
Views: 2156

Re: Winbox feature request: ICMP/Port Knocking for administrative access

A quick example /ip firewall filter # first knock on 61910/tcp add action=add-src-to-address-list address-list=mgmt_knocking_1 address-list-timeout=1m chain=input comment="mark remote admin port knocking 1" dst-port=61910 in-interface-list=wan limit=\ 1,1:packet log=yes log-prefix=P_KNOCK_...
by dang21000
Mon Jul 08, 2024 4:37 pm
Forum: General
Topic: Winbox feature request: ICMP/Port Knocking for administrative access
Replies: 25
Views: 2156

Re: Winbox feature request: ICMP/Port Knocking for administrative access

Hi, I use the same thing for remote and emergency access only since many years. And love to have an easier way.... but not a problem and i also use knoking for emergency access not only from wan, but on guests subnets.... i also place rules on special chains to easy manage them instead input. You ca...
by dang21000
Mon Feb 05, 2024 12:04 am
Forum: General
Topic: Upgrade Pihole Container Without Breaking It [SOLVED]
Replies: 9
Views: 2388

Re: Upgrade Pihole Container Without Breaking It [SOLVED]

I use it on hap ax3 with USB key inside. I use cli for everything and I don't download image from the router. I pull from my pc, save it as img file and send it to the USB key through scp. After I create a new container without start it. It take few minutes to be ready. When everything is fine, I st...
by dang21000
Sun Feb 04, 2024 11:54 pm
Forum: General
Topic: Dark mode on Dude and Winbox
Replies: 3
Views: 2646

Re: Dark mode on Dude and Winbox

Hi,

Yes that's a dream to have dark mode on winbox.
by dang21000
Wed Apr 12, 2023 10:48 pm
Forum: General
Topic: OVPN server & client(Site to Site)
Replies: 1
Views: 452

Re: OVPN server & client(Site to Site)

Hi,

I think you should try wireguard instead ovpn. I've no tuto and don't find my old cfg because I ve switched since 2years or more.

Performances are for my usage better than before in site2site with fiber connection.
by dang21000
Wed Apr 12, 2023 9:30 am
Forum: Announcements
Topic: v7.9rc is released!
Replies: 253
Views: 83689

Re: v7.9rc is released!

7.9rc2 working on ax2 without any issue
Hi.

For me, FastTrack counters stay at zero on hap_ax3. Since 7.8.
On a rb2011 everything is OK with a similar config.
by dang21000
Thu Apr 06, 2023 9:30 am
Forum: Announcements
Topic: v7.9rc is released!
Replies: 253
Views: 83689

Re: v7.9rc is released!

Hi,

Repartition from 1 to 2 still not work if there container and usbkey (hap ax3).
by dang21000
Sun Apr 02, 2023 12:50 am
Forum: General
Topic: HAP AX3 : routerOS 7.8, partition 1 to 2 stay empty and brick router
Replies: 0
Views: 463

HAP AX3 : routerOS 7.8, partition 1 to 2 stay empty and brick router

Hi, I have 2 HAP AX3 devices running router OS 7.8 and container & wifiwave2 packages. - one partition (128MB) with 35% used space so more than 90MB free - container enabled mode - one USB key in ext4 for container content : /container mounts add dst=/etc/pihole name=pihole_etc src=/usb1-part1/p...