Community discussions

MUM Europe 2020

Search found 234 matches

by bledar
Thu Mar 03, 2016 10:01 am
Forum: General
Topic: connection-bytes equivalent on Cisco
Replies: 2
Views: 391

Re: connection-bytes equivalent on Cisco

Thanks for the reply ZeroByte. This parameter helped me a lot on Mikrotik world and I thought if something similar would exist even for Cisco IOS. Pls, any equivalent config on Cisco for marking connection and count bytes would be great for prioritizing real web traffic instead of all tcp 80 port tr...
by bledar
Wed Mar 02, 2016 12:47 pm
Forum: General
Topic: connection-bytes equivalent on Cisco
Replies: 2
Views: 391

connection-bytes equivalent on Cisco

Hi mates,

I need help on how to configure connection-bytes= parameter used for QoS in Mikrotik, to Cisco router.
So, connection-bytes equivalent on Cisco
I will very appreciate your help!
by bledar
Sat Nov 20, 2010 4:39 pm
Forum: General
Topic: Redirect traffic
Replies: 4
Views: 1016

Redirect traffic

Hello!

I need to add Squid proxy for my clients. I must be in the same subnet with clients.
All requests that came to router, redirects to Squid.
Please, I need help on doing that on Mikrotik (not with parent proxy).

Thank you in advance!
by bledar
Sat Nov 20, 2010 4:32 pm
Forum: General
Topic: Queue parent with more than one gateway
Replies: 1
Views: 497

Queue parent with more than one gateway

Dear friends. On my system I have 3 gateways with 3 different internet providers. I want to add some QoS (traffic prioritization, or per traffic limitaion) rules, different for each gateway. My new queue with parent interface (for ex. ethernet1) does not work. It works only with parent global-out. A...
by bledar
Fri Oct 15, 2010 9:01 pm
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Re: Traffic/bandwidth optimization and transparent proxy

Are enough this 2 rules below for doing config like on attached picture (clients and Squid proxy are on the same subnet and squid will not serve as parent proxy for mikrotik web proxy): ip firewall nat>print 2 X ;;; To Squid chain=dstnat action=dst-nat to-addresses=192.168.12.66 to-ports=3128 protoc...
by bledar
Fri Oct 15, 2010 11:41 am
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Re: Traffic/bandwidth optimization and transparent proxy

"Why that works with PCC http://wiki.mikrotik.com/wiki/Manual:PCC ?"
"that" i mean proxy
by bledar
Fri Oct 15, 2010 11:39 am
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Re: Traffic/bandwidth optimization and transparent proxy

So, there is no way to build 2 separated LAN IP groups connected to 2 different ISPs with Web proxy ? Why that works with PCC http://wiki.mikrotik.com/wiki/Manual:PCC ? Even on this config connection is classified per src-address. I tried that to put src-address-list="grpup ip A" and src-address-lis...
by bledar
Thu Oct 14, 2010 8:57 pm
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Re: Traffic/bandwidth optimization and transparent proxy

But I want a solution that 'Group IP A' of LAN to connect with ISP1 and 'Group IP B' of LAN to connect with ISP2 via Mikrotik Router with buildin Web Proxy (traffic must not bypassing proxy).

Is it possible to separate traffic based on source IP address after proxy?
by bledar
Thu Oct 14, 2010 11:18 am
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Routing mark and transparent proxy

Sorry, it was my mistake. Rules that inhibit each-other are: ip firewall mangle print> 1- ;;; Route_to_ABCom chain=prerouting action=mark-routing new-routing-mark=route_to_ABCom passthrough=no src-address-list=Route_to_ABCom ;;; Route_to_Albtelekom2 chain=prerouting action=mark-routing new-routing-m...
by bledar
Wed Oct 13, 2010 4:20 pm
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Re: Traffic/bandwidth optimization and transparent proxy

I am trying to mangle with prerouting packets and than to give priority to queue tree. Also must mangle prerouting tcp port 80 connection for than redirect that to port 800 (port of proxy). But in this way does not work. Does exist any other way to do so? Config: ip firewall mangle print> ;;; Downlo...
by bledar
Wed Oct 13, 2010 4:00 pm
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Re: Traffic/bandwidth optimization and transparent proxy

Yes, I am marking packets on upper rules. ip firewall mangle print> 3 X ;;; Mark 80 TCP Connection for proxy chain=prerouting action=mark-connection new-connection-mark=http_conn passthrough=no protocol=tcp dst-port=80 But does exist any way to do traffic/bandwidth optimization and transparent proxy?
by bledar
Wed Oct 13, 2010 1:57 pm
Forum: General
Topic: Traffic/bandwidth optimization and transparent proxy
Replies: 12
Views: 3114

Traffic/bandwidth optimization and transparent proxy

Hi guys! Is it possible to do traffic/bandwidth optimization and transparent proxy simultaneously? My config is: /ip firewall mangle>pr 8 X ;;; Route_to_ABCom_backup chain=prerouting action=accept src-address-list=winbox_active in-interface=Local 9 ;;; All Download All chain=prerouting action=mark-p...
by bledar
Thu Oct 07, 2010 9:36 pm
Forum: General
Topic: Command line pinging via one defined interface
Replies: 1
Views: 462

Command line pinging via one defined interface

Hello friends! On Mkrt system I have 2 internet connections. I need to ping http://www.google.com via one of them but when I ping using cmd /ping http://www.google.com is OK about 50ms, when I ping interface defined I have some strange response time /ping http://www.google.com interface=ABCom why th...
by bledar
Tue Mar 16, 2010 4:29 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

Hello guys.

Do you have any idea or any experience on mangle audio and video messengers traffic (msn,yahoo, skype)?

Thnks.
by bledar
Tue Mar 16, 2010 4:25 pm
Forum: General
Topic: Mikrotik+Squid parent proxy
Replies: 11
Views: 13535

Re: Mikrotik+Squid parent proxy

Hello.

No, in RouterOS no. Only some changes on Squid config and on file system of linuxOS for best performance.
If you need them I will list them.

BR
by bledar
Wed Mar 10, 2010 12:38 pm
Forum: General
Topic: Mikrotik+Squid parent proxy
Replies: 11
Views: 13535

Re: Mikrotik+Squid parent proxy

OK. Thank you. I resolved it.

Best regards
by bledar
Fri Mar 05, 2010 9:47 pm
Forum: General
Topic: Mikrotik+Squid parent proxy
Replies: 11
Views: 13535

Re: Mikrotik+Squid parent proxy

Pls, may you help me with some other informations regarding that config?
Like:
-the ip of squid is the same range, physical port with other clients?
-route to/from squid.

thank you for your help.

Best regards!
by bledar
Thu Mar 04, 2010 11:22 am
Forum: General
Topic: 2 WAN connections
Replies: 3
Views: 597

Re: 2 WAN connections

I did: / ip firewall address-list add list="WAN-01" address=172.18.1.24/32 comment="" disabled=no add list="WAN-02" address=172.18.1.76/32 comment="" disabled=no / ip firewall nat add chain=srcnat action=masquerade out-interface="WAN - 01" src-address-list="Allowed-Internet" comment="Gateway 10.0.1....
by bledar
Wed Mar 03, 2010 4:25 pm
Forum: General
Topic: Mikrotik+Squid parent proxy
Replies: 11
Views: 13535

Mikrotik+Squid parent proxy

I want to do the below configuration (attached)
Sqid proxy to serve like parent proxy for mikrotik web proxy.
Pls, I need help doing that. Any presentation or tutorial regarding this config will help me to much.

Thank you in advance.
by bledar
Wed Mar 03, 2010 4:19 pm
Forum: General
Topic: 2 WAN connections
Replies: 3
Views: 597

2 WAN connections

I added another WAN/Internet connection to my router. Pls, I need help to route some clients to new added WAN2.
by bledar
Thu Feb 25, 2010 12:22 pm
Forum: General
Topic: Route youtube
Replies: 6
Views: 1632

Re: Route youtube

Pls, any help?
by bledar
Tue Feb 23, 2010 6:26 pm
Forum: General
Topic: Route youtube
Replies: 6
Views: 1632

Re: Route youtube

Thank you guys. I'll try it.
I have some DNS records for youtube, but I dont know if thay are enough!
I need help to find all dns that youtube uses. Does exist any tools or website for this purpose?

thanks again.
by bledar
Tue Feb 23, 2010 3:59 pm
Forum: General
Topic: Route youtube
Replies: 6
Views: 1632

Route youtube

I have to route youtube to another WAN interface. I tried with some IP ranges, no success. I tried with another method: script to search on DNS records for "youtube", send thats IPs to an address-list, route traffic to that address-list to desired WAN gateway, but even this way is not so efficent! P...
by bledar
Mon Feb 22, 2010 10:43 am
Forum: General
Topic: Queue store size
Replies: 1
Views: 493

Re: Queue store size

I found it on Manual.

have a nice day guys.

Bye
by bledar
Mon Feb 22, 2010 10:37 am
Forum: General
Topic: Queue store size
Replies: 1
Views: 493

Queue store size

I have implemented QoS traffic prioritization with Queue tree and PCQ on RouterOS.
Which parameter determine queue store size (I mean queued traffic in bytes of a queue tree with lower priority than others)
by bledar
Wed Feb 17, 2010 6:51 pm
Forum: General
Topic: IP proxy access
Replies: 1
Views: 506

IP proxy access

Is it any way to allow or deny a group of IPs on IP webproxy access?
For example, on src-address="adress list"

thank you in advance.
by bledar
Wed Feb 17, 2010 5:59 pm
Forum: General
Topic: Video traffic
Replies: 1
Views: 462

Re: Video traffic

So, have anyone mangled successfully messengers (yahoo, MSN, skype...) multimedia traffic (voice and vide traffic)?
by bledar
Mon Feb 15, 2010 3:35 pm
Forum: General
Topic: Video traffic
Replies: 1
Views: 462

Video traffic

I need help mangeling messenger's video traffic. Any idea on how to distinguish messengers video traffic from other video traffic (like from youtube or other similar sites) Or how to mangle for examle these 2 coddecs that live messenger use: "x-rtvc1" with payload type 121, the second one is H263 wi...
by bledar
Sat Feb 13, 2010 2:58 pm
Forum: General
Topic: QoS traffic prioritization
Replies: 2
Views: 907

Re: QoS traffic prioritization

Thank you again Chupaka. I read that article a couple of times times before, but now I think that understood thats philosophy.

Have nice weekend.
Bye
by bledar
Thu Feb 11, 2010 3:42 pm
Forum: Scripting
Topic: Script modification
Replies: 0
Views: 553

Script modification

I need a idea please on how to change below script to monitor queue tree queue load. Is this wright?: system script add name="tl_down" source="/queue tree monitor-traffic [/queue tree find name "interface"] once do { /system script add name="tl_down" source="/interface monitor-traffic [/interface fi...
by bledar
Thu Feb 11, 2010 12:56 pm
Forum: General
Topic: QoS traffic prioritization
Replies: 2
Views: 907

QoS traffic prioritization

I have implemented QoS traffic prioritization, from 1 to 8. Please, I need to clear something, what QoS is doing in these case: only limiting traffic for different of queues and acontenting firstly "limit-at" of queues with higher priority or queueing some traffic and letting passing firstly packets...
by bledar
Fri Jan 29, 2010 2:33 pm
Forum: General
Topic: Connecting via winbox
Replies: 4
Views: 808

Re: Connecting via winbox

I tested it with ip:80 but no success. I will check again, maybe some input rule is dropping anything else except port 8291 for IP of comp that I tested.
So, in that way it works, means that I have locally something that blocks it.

thank you for your help.

Best regards
by bledar
Thu Jan 28, 2010 11:04 pm
Forum: General
Topic: Connecting via winbox
Replies: 4
Views: 808

Re: Connecting via winbox

If I change port of winbox to 80 and disable www service (/ip services), I cant connected any more from winbox localy and not from internet. Maybe winbox search for connection only port 8291.
Does someone have success connecting from port 80 to router via winbox?
by bledar
Thu Jan 28, 2010 6:04 pm
Forum: General
Topic: Route video traffic
Replies: 7
Views: 1793

Re: Route video traffic

Thank you guys. It was very helpfully.

Best regards
by bledar
Wed Jan 27, 2010 7:12 pm
Forum: General
Topic: Route video traffic
Replies: 7
Views: 1793

Re: Route video traffic

I have troubles finding all IPs that youtube uses, thats why I cant route video traffic. I have an list of IPs but I think it is not full range of ips that youtube uses. ip firewall address-list print Flags: X - disabled, D - dynamic # LIST ADDRESS 0 Youtube 208.117.224.0/24 1 Youtube 208.117.225.0/...
by bledar
Mon Jan 25, 2010 9:03 pm
Forum: General
Topic: Route video traffic
Replies: 7
Views: 1793

Route video traffic

I have 3 WAN interfaces on my Router.
Please, I need help to route to only one WAN interface video traffic (youtube, redtube etc...). I have troubles mangle it.
by bledar
Mon Jan 25, 2010 8:58 pm
Forum: General
Topic: Connecting via winbox
Replies: 4
Views: 808

Connecting via winbox

I want to connect from my office to Mikrotik RouterOS via winbox. I have only port 80 TCP open on my office.
So, may I connect to RouterOS via winbox with only port 80 TCP opened?

BR
by bledar
Tue Jan 19, 2010 1:54 pm
Forum: General
Topic: NAT issue
Replies: 9
Views: 1175

Re: NAT issue

Hello.
I resolved it. Removed LAN ip addresses from PCC selection on upload and redirected them to a specific gateway.
I will see how might do for all IPseach incoming gateway.

Thank you for your help.
by bledar
Thu Jan 14, 2010 10:53 am
Forum: General
Topic: NAT issue
Replies: 9
Views: 1175

Re: NAT issue

I did it but no success again. At least this time I can connect to router via this gateway (I tested with WAN1 interface firstly)

I see that is 0B routing mark rule (please see attached print scrn), what does it means that it was never matched?

Thank you again.
by bledar
Wed Jan 13, 2010 11:38 am
Forum: General
Topic: NAT issue
Replies: 9
Views: 1175

Re: NAT issue

Hi.

I moved those rules upper on top of all rules.
But no success.

Please how may I resolve this problem?


Best Regards
by bledar
Tue Jan 12, 2010 12:59 pm
Forum: General
Topic: NAT issue
Replies: 9
Views: 1175

Re: NAT issue

Hello. Thanx for reply. I added these rules: 17 X ;;; Reply to traffic going to WAN1 side with WAN1 connection chain=input action=mark-connection new-connection-mark=outside_WAN1_connection passthrough=yes src-address=!192.168.12.0/24 dst-address=xx.xx.xx.247 18 X ;;; Reply to traffic going to WAN1 ...
by bledar
Mon Jan 11, 2010 3:36 pm
Forum: General
Topic: NAT issue
Replies: 9
Views: 1175

NAT issue

Hello. I have 3 wan interfaces. I am trying with remote desktop to connect from internet to my home server (ip:192.168.12.122) with NAT but when I have success only via 2 interfaces (with pppoe authentication) and with other sometimes I have and sometimes not. the config is same I disabled all rules...
by bledar
Tue Dec 08, 2009 11:19 am
Forum: General
Topic: High CPU usage for "long" time on 'building cache' process
Replies: 2
Views: 803

Re: High CPU usage for "long" time on 'building cache' process

thank you for reply.

My processor is dual core but I have problems when it was configured RouterOS to run with dual cores. When I did multi-cpu=no looks like situation was normalized.

So, I have no change (except reducing cache size) to reduce time of high processor consumption :) ?
by bledar
Mon Dec 07, 2009 3:41 pm
Forum: General
Topic: High CPU usage for "long" time on 'building cache' process
Replies: 2
Views: 803

High CPU usage for "long" time on 'building cache' process

Hello. I have installed RouterOS 4.3 on an IBM 3Ghz proc/1GB RAM/80GB HDD and configured web proxy with 30GB cache size. I have some troubles with proxy cache. The CPU consumption rest to 100% for about 5min when I reboot system. I think it happen when "building cache" process is running. Is that no...
by bledar
Sat Dec 05, 2009 1:04 pm
Forum: General
Topic: Not cacheing facebook
Replies: 3
Views: 604

Re: Not cacheing facebook

thank you for reply. I had problems with some users to loggin to facebook (some users logged in successfully some not ). I thought that maybe was problem on cache. I added this rule: ip proxy cache add dst-host=:facebook action=deny and I am waiting for results. Has anyone this problem before? What ...
by bledar
Fri Dec 04, 2009 11:36 am
Forum: General
Topic: Not cacheing facebook
Replies: 3
Views: 604

Not cacheing facebook

Hi.

On ip proxy cache I do want to cache websites like: facebook, twitter ... May I do that in one rule?
by bledar
Wed Nov 18, 2009 1:43 pm
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10511

Re: Mikrotik and vmware esx server

Have anyone success with RouterBoard44 PCI 4 port ethernet adapter to work with ESXi 4?
Or does exist any working driver that I must add for having this card to work on that system?
by bledar
Wed Nov 18, 2009 12:42 pm
Forum: General
Topic: NetworkPro on firewalling
Replies: 6
Views: 835

Re: NetworkPro on firewalling

No I dont know what exactely these rules do, thats why I am asking about 'drop' rule
So If someone helps me with short explain Ill bee grateful.

Thanks
by bledar
Tue Nov 17, 2009 1:38 pm
Forum: General
Topic: NetworkPro on firewalling
Replies: 6
Views: 835

Re: NetworkPro on firewalling

It is true, I havent any rule with chain=drop. I created one and all seems OK.
For blocking a specific traffic, may I use now chain=drop instead of input, output or forward?

Thank you kirshteins!
by bledar
Tue Nov 17, 2009 1:02 pm
Forum: General
Topic: NetworkPro on firewalling
Replies: 6
Views: 835

NetworkPro on firewalling

Hi.

I put the rules of "NetworkPro on firewalling", wiki, on my router but something seems going wrong.
http://wiki.mikrotik.com/wiki/NetworkPro_on_firewalling

All rules that contains "jump-target=drop" are with red color (on winbox).
Please, may someone help me to find where the problem is.

BR
by bledar
Thu Nov 05, 2009 5:36 pm
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10511

Re: Mikrotik and vmware esx server

Does RouterBoard44 PCI 4 port ethernet adapter works with ESXi 4?
Or any working driver?
by bledar
Wed Oct 21, 2009 3:02 pm
Forum: General
Topic: RouterOS web proxy
Replies: 5
Views: 2772

Re: RouterOS web proxy

come on guys, nobody helps me.
by bledar
Tue Oct 20, 2009 12:46 pm
Forum: General
Topic: RouterOS web proxy
Replies: 5
Views: 2772

Re: RouterOS web proxy

Please, any help?
by bledar
Mon Oct 19, 2009 10:40 pm
Forum: General
Topic: RouterOS web proxy
Replies: 5
Views: 2772

Re: RouterOS web proxy

Hello. I monitored traffic from router (web proxy cache) with: chain=output action=log protocol=tcp out-interface=Local dscp=4 log-prefix="from_proxy=" When I downloaded for second time same files, they was miss not hit. Hit was only a little bytes. For example refresh www.google.com has HIT. What c...
by bledar
Fri Oct 16, 2009 2:50 pm
Forum: General
Topic: RouterOS web proxy
Replies: 5
Views: 2772

Re: RouterOS web proxy

sorry even those may be helpful :) queue tree print Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat action=masquerade out-interface=ABCom 1 chain=srcnat action=masquerade out-interface=Albtelekom1 2 chain=srcnat action=masquerade out-interface=Albtelekom2 3 chain=dstnat action=dst-nat t...
by bledar
Fri Oct 16, 2009 2:44 pm
Forum: General
Topic: RouterOS web proxy
Replies: 5
Views: 2772

RouterOS web proxy

Hi. I have problems with my web proxy. When I download for second time any file less than max. cache size, so less than ~25MB, it downloads from internet again not from cache. Maybe the rule for caching all packets from proxy, DSCP=4 is not working properly, 23 ;;; HIT TRAFFIC FROM PROXY chain=outpu...
by bledar
Wed Oct 14, 2009 12:21 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

May I use PCQ with rate=x for QoS, traffic prioritization queue tree? I mean. Does it have any problem to use PCQ queue types (with rate specified) on queue trees for QoS traffic prioritization? In some threads here in forum, say that QoS prioritization does not work for download traffic with motiv...
by bledar
Tue Oct 13, 2009 4:49 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

May I use PCQ with rate=x for QoS, traffic prioritization queue tree?

Thank you in advance.
by bledar
Tue Oct 13, 2009 4:45 pm
Forum: General
Topic: Traffic mangle.
Replies: 6
Views: 1165

Re: Traffic mangle.

Did you have any success with it?
by bledar
Tue Oct 13, 2009 4:44 pm
Forum: General
Topic: Traffic mangle.
Replies: 6
Views: 1165

Re: Traffic mangle.

thank you. I will try it.
by bledar
Sat Oct 10, 2009 10:19 am
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

But how may I do that. Please help me.
by bledar
Thu Oct 08, 2009 1:25 pm
Forum: General
Topic: Traffic mangle.
Replies: 6
Views: 1165

Re: Traffic mangle.

I dont know how to use it on PCC.

Maybe a working code of L7 mangle, got it anyone?

thanks.
by bledar
Thu Oct 08, 2009 10:32 am
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

[img][i]btw, 'Mark all downloaded packets from 3 WANs' is actually 'Mark all not marked downloaded packets from 3 WANs' - in previous rules you have passthrough=no [/i][/img] I put those rules upper than 'services' packets mark, passthrough=yes and seems that works well. I have no success with .exe...
by bledar
Wed Oct 07, 2009 6:13 pm
Forum: General
Topic: Traffic mangle.
Replies: 6
Views: 1165

Traffic mangle.

Hi!

Is it any success way to mangle .exe downloads, for QoS.
I tried it with layer 7 but no success (\x4d\x5a(\x90\x03|\x50\x02)\x04).
by bledar
Wed Oct 07, 2009 5:36 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

On this example: http://wiki.mikrotik.com/wiki/NetworkPr ... of_Service

add action=mark-packet chain=postrouting comment=QoS dst-port=80,443 new-packet-mark=QoS_1_Up out-interface=ADSL1 packet-size=0-666 passthrough=no protocol=tcp tcp-flags=syn


why packet-size is 0-666, why till 666?
by bledar
Wed Oct 07, 2009 5:23 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

Sorry, understood :)
by bledar
Wed Oct 07, 2009 5:14 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

By the way, why I have to specify limitation (CIR, MIR) for queue tree. I do not need to do limitation of traffic or services, I want to give them prioritization. For ex. if we have 2 services A with 10 packets and B with 20 packets (A prio1 and B prio2), firstly must pass all 10 packets of service ...
by bledar
Wed Oct 07, 2009 3:18 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

Hi all. This is my config: Please I need your opinion regarding traffic prioritization. [admin@MikroTik] /ip firewall mangle> pri Flags: X - disabled, I - invalid, D - dynamic 0 chain=input action=mark-connection new-connection-mark=pub1_conn passthrough=yes in-interface=WAN1 1 chain=input action=ma...
by bledar
Tue Oct 06, 2009 11:12 am
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

Hi. On this link, http://mum.mikrotik.com/presentations/CZ09/QoS_Megis.pdf page 34 indicate to mark with prerouting and shape with HTB global-in. Not mark packets with forward and shaping with HTB global-out. I don't understand now what I must to do, trying to find the way to mark with prerouting an...
by bledar
Tue Oct 06, 2009 9:46 am
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

I tested it only for queue tree number 3 and 19. Other upload queues are disabled.
by bledar
Mon Oct 05, 2009 6:10 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

I put this rules on firwall mangle: 14 ;;; Mark all dwn packets chain=prerouting action=mark-packet new-packet-mark=from_pub passthrough=no in-interface=WAN1 15 chain=prerouting action=mark-packet new-packet-mark=from_pub passthrough=no in-interface=WAN2 16 chain=prerouting action=mark-packet new-pa...
by bledar
Mon Oct 05, 2009 6:01 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

No Chupaka I asked: is it true that must use oly prerouting for marking packet and shaping on HTB global-in, not for example mark packet with forward and shaping on global-out?
Will work good the second way for traffic prioritization purpose?

Thank you!
by bledar
Mon Oct 05, 2009 4:46 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

QoS regarding traffic prioritization.
Is it true that must use oly prerouting for marking packet and shaping on HTB global-in?
Forward for marking packets and shaping on HTB global-out, will it works good?

Thanks for helping me.
by bledar
Mon Oct 05, 2009 1:46 pm
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

Thank you Macgaiver!

So is no way to use prerouting packets in this case?
Confronting prerouting mark, shaping on global-in and forward mark and shaping on global-out for QoS purposes, who is the best way?
Or the result is same on both ways?
by bledar
Mon Oct 05, 2009 1:38 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

OK. Now I understood what PCC is but on continue of my routerOS config I posted also QoS issue. in this case I have those rules on firewall mangle: 14 ;;; HIT TRAFFIC FROM PROXY chain=output action=mark-packet new-packet-mark=proxy-hit passthrough=no out-interface=Local dscp=4 15 ;;; UP TRAFFIC chai...
by bledar
Mon Oct 05, 2009 10:12 am
Forum: General
Topic: Is (( PRIORITY )) Really working ???
Replies: 188
Views: 39581

Re: Is (( PRIORITY )) Really working ???

Hi. I want to give some packets higher priority than others. Is it any way to mark packet on chain 'prerouting' and than shaping them on HTB Global-in when I have 3 public interfaces? Or I must mark packets only on chain 'forward' and than shaping them on HTB Global-out? My Router's actual config is...
by bledar
Mon Oct 05, 2009 10:09 am
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

Hi. I want to give some packets higher priority than others. Is it any way to mark packet on prerouting and than shaping them on HTB Global-in when I have 3 public interfaces? My Router's actual config is: [admin@MikroTik] > ip route print Flags: X - disabled, A - active, D - dynamic, C - connect, S...
by bledar
Wed Sep 30, 2009 5:39 pm
Forum: General
Topic: Trffic shaping
Replies: 4
Views: 823

Re: Trffic shaping

Dear Chupaka. I intend to implement QoS with this priority order: Prio 1 dns,icmp, VoIP, SIP, STUN Prio 2 add chain=forward action=mark-connection connection-bytes=0-500000 connection-mark=all_conn connection-rate=0-200k new-connection-mark=light_traffic_conn protocol=tcp add chain=forward action=ma...
by bledar
Wed Sep 30, 2009 5:16 pm
Forum: General
Topic: Trffic shaping
Replies: 4
Views: 823

Re: Trffic shaping

No, no they wok perfectly on other cases but in this case (messenger's video) or I put wrong values or is impossible to determine the wright bandwidth diapason (as I know video quality over ethernet may vary from 128kbps-2Mbps).
So I asked for any other way that I don't know.
by bledar
Wed Sep 30, 2009 5:03 pm
Forum: General
Topic: Trffic shaping
Replies: 4
Views: 823

Trffic shaping

Hi Normis. with L7 I can find some messenger traffic mangle: add name="skypeout" regexp="^(\x01.?.?.?.?.?.?.?.?\x01|\x02.?.?.?.?.?.?.?.?\x02|\x03.?.?.?.?.?.?.?.?\x03|\x04.?.?.?.?.?.?.?.?\x04|\x05.?.?.?.?.?.?.?.?\x05|\x06.?.?.?.?.?.?.?.?\x06|\x07.?.?.?.?.?.?.?.?\x07|\x08.?.?.?.?.?.?.?.?\x08|\x09.?.?....
by bledar
Wed Sep 30, 2009 4:19 pm
Forum: General
Topic: QoS, traffic mark.
Replies: 5
Views: 957

Re: QoS, traffic mark.

Hello.

May someone help me how to mangle video traffic of some known messengers (msn, yahoo, skype, aim) for quality of service.
by bledar
Tue Sep 29, 2009 3:18 pm
Forum: General
Topic: QoS, traffic mark.
Replies: 5
Views: 957

Re: QoS, traffic mark.

Hi Normis. I don't know exactly what L7 does. Lets take for example Video over HyperText Transfer Protocol L7=http/(0\.9|1\.0|1\.1)[\x09-\x0d ][1-5][0-9][0-9][\x09-\x0d -~]*(content-type: video) If I mangle this traffic via L7 and prioritizing it confront other packets, does really all streamed pack...
by bledar
Mon Sep 28, 2009 6:44 pm
Forum: General
Topic: QoS, traffic mark.
Replies: 5
Views: 957

QoS, traffic mark.

Is it any way to mark messenger's (msn, yahoo, skype ...) video for QoS ?
With connection-rate, L7 filtering or other way?
by bledar
Sat Sep 26, 2009 6:17 pm
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

I use simple queue for having more bandwidth for an period of time (ex. 10s). But on my configuration queue simple rules seems that does not work properly. Please, what I must change for making them to work? queue config: [admin@MikroTik] /queue tree> pr Flags: X - disabled, I - invalid 0 name="queu...
by bledar
Sat Sep 26, 2009 6:11 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

I test it and it is really well working. But I have an problem with yahoo messenger. Cant not initialize a voice or video connection. Chat is OK. I changed connection configuration on messenger's menu, set it to direct connection, http proxy and sock proxy IP of router and port of proxy but no succe...
by bledar
Fri Sep 25, 2009 3:05 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

Maybe when adding routes via terminal must use 'gateway=xx.xx.3.1%WAN2' and 'gateway=xx.xx..3.1%WAN3' not 'gateway=xx.xx.xx.225%WAN1' and 'gateway=xx.xx.xx.225%WAN2' ??? Because WAN2 & WAN3 have the same GW IP address. I did it in this way ( 'gateway=xx.xx.3.1%WAN2' and 'gateway=xx.xx..3.1%WAN3' ) a...
by bledar
Fri Sep 25, 2009 11:25 am
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

I asked for this queue simple: 'default' or 'PCQ' [admin@MikroTik] /queue simple> pr Flags: X - disabled, I - invalid, D - dynamic 0 name="conn 1" target-addresses=192.168.1.101/32 dst-address=0.0.0.0/0 interface=Local parent=none direction=both priority=5 queue= default/default limit-at=200k/200k m...
by bledar
Thu Sep 24, 2009 7:54 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

No, no, no it still does not works.
when I determine "Gateway Interface" for each connection WAN3 interface is still present on WAN2 with routing mark to_pub2

Please, how may I resolve this situation.

thnks again
by bledar
Thu Sep 24, 2009 6:20 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

I think I found it, determining "gateway interface" and it works.

Thank again.

Bye
by bledar
Thu Sep 24, 2009 4:59 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

Dear Chupaka, please, help me how to do that: 'code' tag. May you suggest me how to do that.

Thank you again. you are great :)
by bledar
Thu Sep 24, 2009 4:55 pm
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

Oh, this one I think is wright :) /ip firewall mangle add chain=output out-interface=Local dscp=4 action=mark-packet new-packet-mark=proxy-hit passthrough=no comment="HIT TRAFFIC FROM PROXY" add chain=prerouting in-interface=Local src-address=192.168.0.0/16 action=mark-packet new-packet-mark=test-up...
by bledar
Thu Sep 24, 2009 3:39 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

Sorry. this one has a nicer view :)
by bledar
Thu Sep 24, 2009 3:35 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

My Routing table: WAN1 is not connected # DST-ADDRESS PREF-SRC GATEWAY-STATE GATEWAY DISTANCE INTERFACE 0 A S 0.0.0.0/0 reachable xx.xx.3.1 1 WAN3 1 S 0.0.0.0/0 unreachable xx.xx.xx.225 1 WAN1 2 A S 0.0.0.0/0 reachable xx.xx.3.1 1 WAN3 3 S 0.0.0.0/0 unreachable xx.xx.xx.225 1 WAN1 4 S 0.0.0.0/0 reac...
by bledar
Thu Sep 24, 2009 2:59 pm
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

I dont know how to do that without connection-marks. Is this config OK with PCQ? Do I need to set up queue type on Simple Queues and Interface Queues to PCQ_Download or PCQ_Upload? Thank you again for your help! /ip firewall mangle add chain=output out-interface=Local dscp=4 action=mark-packet new-p...
by bledar
Thu Sep 24, 2009 12:19 pm
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

I did PCC gateway load balancing configuration with 3 WAN connections. I intend to do this configuration too for having max speed from proxy cache to clients, but firstly I need to consult with you. -Is this wright config that I must add to my router? -New Mangle rules (these ones that I intend to a...
by bledar
Thu Sep 24, 2009 10:10 am
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

Re: PCC matcher

I tested it with 2 ro 3 different PCs, maybe more traffic is needed?
I have 2 DSL lines from/to the same ISP, with the same gateway IP address, is this a problem using above configuration? (just for surety)

Thank you again.
by bledar
Thu Sep 24, 2009 10:01 am
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

thank you Chupaka for helping me
by bledar
Wed Sep 23, 2009 7:37 pm
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

Hi.

What about messengers, do they have problems using PCC matcher?

Thank you and best regards.
by bledar
Wed Sep 23, 2009 7:30 pm
Forum: General
Topic: Does anyone of you have problems with messengers using PCC?
Replies: 1
Views: 355

Does anyone of you have problems with messengers using PCC?

Does anyone of you have problems with messengers using PCC matcher?
by bledar
Wed Sep 23, 2009 7:08 pm
Forum: General
Topic: PCC matcher
Replies: 22
Views: 2387

PCC matcher

I entered this configuration on router http://wiki.mikrotik.com/wiki/PCC#Introduction http://wiki.mikrotik.com/wiki/PCC#Introduction but when I download only one interface is loaded. Please, where is the error? Maybe this is only for upload gateway load balancing? Is this the wright config for load ...
by bledar
Wed Sep 23, 2009 12:27 pm
Forum: General
Topic: script
Replies: 4
Views: 532

Re: script

Please, is this script OK for monitoring load of "ether2" interface for 10 sec and if it will be over 1Mbps will disable route Routes2 ??? /system script add name="ether2" source="/interface monitor-traffic [/interface find name "ether2"] once do { :if ($received-bits-per-second > 1048576) do { /ip ...
by bledar
Tue Sep 22, 2009 5:52 pm
Forum: General
Topic: Best matcher
Replies: 2
Views: 473

Re: Best matcher

It has not to do with prioritization, but with traffic matcher yes.
For prioritization it firstly I must match it. am I wright?
by bledar
Tue Sep 22, 2009 1:12 pm
Forum: General
Topic: script
Replies: 4
Views: 532

Re: script

So all script will looks like this: /system script add name="ether2" source="/interface monitor-traffic [/interface find name "interface"] once do { :if ($received-bits-per-second > 1048576) do { /ip routes disable [/ip routes find comment=Routes2] :while ($i < 10) do={ :set i ($i + 1); /interface m...
by bledar
Tue Sep 22, 2009 1:00 pm
Forum: General
Topic: Best matcher
Replies: 2
Views: 473

Best matcher

I need to do gateway load balancing with 3 DSL connections, 2 on one ISP and one on other ISP. If on firewall mangle I will match http traffic firstly add action=mark-connection chain=forward comment="HTTP and HTTPS" disabled=no \ dst-port=80,443 new-connection-mark=HTTP_HTTPS passthrough=yes protoc...
by bledar
Tue Sep 22, 2009 11:20 am
Forum: General
Topic: script
Replies: 4
Views: 532

script

Hi. I need help on editing below script or. I want to monitor interface and if for an average of time of 10 seconds will exceed 1Mbps traffic do..., not only if traffic will exceed 1Mbps traffic do... /system script add name="tl_down" source="/interface monitor-traffic [/interface find name "interfa...
by bledar
Mon Sep 07, 2009 3:57 pm
Forum: General
Topic: Bandwidth monitoring and connection switch over.
Replies: 7
Views: 1429

Re: Bandwidth monitoring and connection switch over.

Dear Chupaka. To be honest I want to do this configuration: A-ISP 1 connection must handle these traffic and priority order Priority for traffic from/to interface WAN1 must be: 1-DNS 2-ICMP 3-VoIP [with IP range 192.168.12.40-50, SIP and audio (all needed for good voice service) packets, protocol ca...
by bledar
Mon Sep 07, 2009 11:35 am
Forum: General
Topic: Bandwidth monitoring and connection switch over.
Replies: 7
Views: 1429

Re: Bandwidth monitoring and connection switch over.

Thank you Chupaka.

Please, I want to take support (if it possible) from you. So, please may you write me to my private address muca.indrit@gmail.com or give me your address.

Have a nice day.
by bledar
Tue Sep 01, 2009 4:59 pm
Forum: General
Topic: From 3 to only 2 internet connections
Replies: 4
Views: 578

Re: From 3 to only 2 internet connections

Any idea???
by bledar
Tue Sep 01, 2009 4:56 pm
Forum: General
Topic: Bandwidth monitoring and connection switch over.
Replies: 7
Views: 1429

Re: Bandwidth monitoring and connection switch over.

thank you for reply. To route HTTP traffic only via ISP1, I think mangle rule for marking HTTP traffic must be permanent. Script i needed for monitoring ISP1 connection and activating/ deactivating route with routing-mark and gateway to ISP2 (when this route is active, route to ISP1 with http routin...
by bledar
Tue Sep 01, 2009 10:59 am
Forum: Scripting
Topic: Editing script
Replies: 2
Views: 1744

Editing script

How may I edit this script to monitor bandwidth on interface and if average of bandwidth will exceed 1Mbps for 60s, may activate queue simple rule, and deactivating queue rule if average of bandwidth will be under 950kbs for 60s Scheduled check for loaded interfaces (auto adding queue to some IP or ...
by bledar
Tue Sep 01, 2009 10:34 am
Forum: General
Topic: Bandwidth monitoring and connection switch over.
Replies: 7
Views: 1429

Bandwidth monitoring and connection switch over.

I have 2 different connections to internet, one 10 and other 20Mbps. If traffic to ISP1 will reaches max bandwidth (10Mbps), new HTTP requests must pass via ISP2 connection till bandwidth to ISP1 will be under 9.5Mbps, than newer HTTP requests must pass again via ISP1 connection. Please, may someone...
by bledar
Tue Sep 01, 2009 10:13 am
Forum: General
Topic: From 3 to only 2 internet connections
Replies: 4
Views: 578

Re: From 3 to only 2 internet connections

Hi SurferTim Thank you for your reply. With "Kind of traffic" I mean: via ISP1 I want ot pass only DNS, ICMP, HTTP, HTTPS traffic and via ISP2 & ISP3 must pass other traffic. Meanwhile, with help of a script will monitor load of ISP1 interface, if ith will be loaded more than 10Mbps, new HTTP reques...
by bledar
Mon Aug 31, 2009 8:10 pm
Forum: General
Topic: From 3 to only 2 internet connections
Replies: 4
Views: 578

From 3 to only 2 internet connections

Hi! I have 3 different internet connections on my Mikrotik, ISP1,ISP2 &ISP3. I want to divide traffic on 2 pieces, one kind of traffic must pass via ISP1 and other traffic must pass via ISP2& ISP3 to internet. So, how system may know only 2 main pieces of connections. One is ISP1 and other ISP2&ISP3...
by bledar
Mon Aug 31, 2009 12:42 pm
Forum: General
Topic: Tree internet connections issue
Replies: 0
Views: 306

Tree internet connections issue

Hello. Please, I need help for this configuration. I have 3 different internet connections on my Mikrotik RouterOS. Need to pass HTTP, DNS traffic via ISP1 and other traffic (including HTTP and DNS traffic, when bandwidth of ISP1 is full or reaching a specific bandwidth) via ISP2 & ISP3. I welcome a...
by bledar
Mon Aug 31, 2009 11:45 am
Forum: Wireless Networking
Topic: Three different internet connections
Replies: 1
Views: 443

Three different internet connections

Hello. Please, I need help for this configuration. I have 3 different internet connections on my Mikrotik RouterOS. Need to pass HTTP, DNS traffic via ISP1 and other traffic (including HTTP and DNS traffic, when bandwidth of ISP1 is full or reaching a specific bandwidth) via ISP2 & ISP3. I welcome a...
by bledar
Fri Aug 28, 2009 3:49 pm
Forum: Wireless Networking
Topic: Complex configuration, any idea and help please.
Replies: 1
Views: 548

Re: Complex configuration, any idea and help please.

Please, any suggestion regarding only point A?

Thank you in advance.
by bledar
Fri Aug 28, 2009 10:40 am
Forum: Wireless Networking
Topic: System and proxy cache on the same or different disks
Replies: 4
Views: 721

Re: System and proxy cache on the same or different disks

If I will install system and cache on the same, for clearing all cache it's enough only clear cache or must format drive.
thanks a lot for your help.
by bledar
Thu Aug 27, 2009 3:57 pm
Forum: Wireless Networking
Topic: System and proxy cache on the same or different disks
Replies: 4
Views: 721

System and proxy cache on the same or different disks

If system and proxy cache are on the same disk, does it affect the router performance?

thank you in advance.
by bledar
Wed Aug 26, 2009 5:52 pm
Forum: Wireless Networking
Topic: Complex configuration, any idea and help please.
Replies: 1
Views: 548

Complex configuration, any idea and help please.

Hi guys. I must to do the below configuration on RouterOS Firstly, I need to disuse with you for any idea or configuration. A- ISP 1 connection must handle these traffic and priority order Priority for traffic from/to interface WAN1 must be: 1-DNS 2-ICMP 3-VoIP (with IP 192.168.12.40) 4-HTTP 5-HTTPS...
by bledar
Tue Jul 14, 2009 4:12 pm
Forum: Wireless Networking
Topic: Internet Gateways
Replies: 5
Views: 1049

Re: Internet Gateways

Thank you for your help.
by bledar
Wed Jun 24, 2009 1:36 pm
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Re: Forwarding packets in different routes to the same destinati

Thank you Chupaka for your help.

But what about IP web proxy, does it works with that configuration?
Does anyone test it before?

thnx
by bledar
Wed Jun 24, 2009 11:45 am
Forum: General
Topic: Forwarding packets in different routes to the same destinati
Replies: 16
Views: 2451

Forwarding packets in different routes to the same destinati

Hi. I want to configure gw load balancing with 4 WAN connections to different ISPs, with different bandwidth limitation. It must guarantee that all paths to the destination network are being used. I need your opinion on how to configure (load balancing) router for forwarding packets in different rou...
by bledar
Wed Jun 10, 2009 1:26 pm
Forum: General
Topic: IP proxy cache with 2 gateways
Replies: 2
Views: 489

IP proxy cache with 2 gateways

Hi.

I am wondering if IP proxy cache works with this scenario.

2 LANs
2 WANs

1 internet gateway for each LAN network

http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

If yes, please any suggestion on configuring that.

Thanks.
by bledar
Wed Jun 03, 2009 2:23 pm
Forum: General
Topic: Messengers
Replies: 2
Views: 448

Messengers

Hello


I want to find IP addresses of msn, yahoo, skype, ... servers messengers for marking, priortization than their connections.

Please, help me to find the IPs (range) for most messengers.

Thank you in advance.
by bledar
Sun May 24, 2009 1:58 am
Forum: Wireless Networking
Topic: Internet Gateways
Replies: 5
Views: 1049

Re: Internet Gateways

Thank you n2m for your help.
I have a fogginess regarding gateway load balancing with NTH feature:
Does ip proxy, works with nth load balancing?
Is it a good choice to use NTH with 2 different connections (one connection use shared bandwidth, unstable bandwidth)

Thank you for reply.
by bledar
Thu May 14, 2009 3:11 pm
Forum: Wireless Networking
Topic: Internet Gateways
Replies: 5
Views: 1049

Internet Gateways

Hi. I would like to configure gateway "Load balancing". I mean 2 different internet connections, connected to Mikrotik that serve like one (like on fig). Please, may you help me with configuration, suggestions or any available guide. P.S. 2 Internet Connections have different bandwidth limitations. ...
by bledar
Tue Apr 21, 2009 4:21 pm
Forum: General
Topic: Queue simple Bursts on CISCO router
Replies: 2
Views: 654

Queue simple Bursts on CISCO router

Hi. I know that this is not the right forum and I know also that only you can help me regarding this issue. I like very much RouterOS but I want to have and one cisco router configured as backup on a critical business envoirement. Please, what literature I must read or what configuration I must put ...
by bledar
Wed Apr 08, 2009 2:58 pm
Forum: General
Topic: Connecting a Remote Client via PPTP Tunnel
Replies: 1
Views: 426

Connecting a Remote Client via PPTP Tunnel

Dear friends.

May someone help me, what software I might install on client Laptop to connect with RouterOS PPTP Server.
Maybe Cisco VPN client will works?
by bledar
Tue Apr 07, 2009 6:12 pm
Forum: General
Topic: MKRT with 2 internet conections
Replies: 0
Views: 370

MKRT with 2 internet conections

Hello. I want to implement MKRT with 2 internet conections: /interface set ether1 name=Internet1 /interface set ether2 name=Internet2 /interface set ether3 name=Local Some firewall mangle roules: /ip firewall mangle add chain=prerouting in-interface=Local connection-state=new nth=2,1 action=mark-con...
by bledar
Thu Apr 02, 2009 2:05 pm
Forum: General
Topic: "Mth" on firewall filter
Replies: 2
Views: 386

Re: "Mth" on firewall filter

Nth, sorry
by bledar
Thu Apr 02, 2009 2:04 pm
Forum: General
Topic: "Mth" on firewall filter
Replies: 2
Views: 386

"Mth" on firewall filter

What is Mth on firewall filter please.
May any one help me with some articles about that (except routeros manual)

Thank you in advance.
by bledar
Thu Apr 02, 2009 2:01 pm
Forum: General
Topic: Disaster recovery backup
Replies: 6
Views: 843

Re: Disaster recovery backup

OK. Thank you again Normis.

I have an open thread, what about it please. http://forum.mikrotik.com/viewtopic.php?f=2&t=30789
by bledar
Thu Apr 02, 2009 1:40 pm
Forum: General
Topic: Disaster recovery backup
Replies: 6
Views: 843

Re: Disaster recovery backup

Even if new installation of OS is needed (installed on PC)?
by bledar
Thu Apr 02, 2009 1:36 pm
Forum: General
Topic: Load balancing over multiple gateways and proxy
Replies: 1
Views: 562

Re: Load balancing over multiple gateways and proxy

Any help with succeed scenarios.

thank you in advance.
by bledar
Thu Apr 02, 2009 1:34 pm
Forum: General
Topic: Disaster recovery backup
Replies: 6
Views: 843

Re: Disaster recovery backup

Thank you Normis

What about if ROuterOS crashes. What we can do for lousing not the license? Any backup restore of OS, how to?
by bledar
Thu Apr 02, 2009 1:12 pm
Forum: General
Topic: Disaster recovery backup
Replies: 6
Views: 843

Disaster recovery backup

Please, any help how to backup RouterOS for disaster recovery.
(not only configuration, OS also)

Thank You
by bledar
Wed Apr 01, 2009 5:59 pm
Forum: General
Topic: Load balancing over multiple gateways and proxy
Replies: 1
Views: 562

Load balancing over multiple gateways and proxy

Hi.

Is it possible to work ip proxy on version 3.22 with load balancing over multiple gateways (as shown in this example + ip proxy:
http://wiki.mikrotik.com/wiki/Load_Bala ... e_Gateways

thnks!
by bledar
Mon Mar 30, 2009 3:52 pm
Forum: General
Topic: 2 ISPs serving as backup of each-other traffic
Replies: 0
Views: 350

2 ISPs serving as backup of each-other traffic

Hello. Please, how may I configure routerOS with 2 WAN and 2 LAN interfaces that member of X IP range on LAN 1 to access internet via ISP1 connected on WAN1 interface and member of Y IP range on LAN 2 to access internet via ISP2 connected on WAN2 interface. 2 WAN interfaces: WAN 1-->ISP1 WAN 2-->ISP...
by bledar
Fri Mar 20, 2009 1:37 pm
Forum: General
Topic: Bandwidth management
Replies: 2
Views: 478

Re: Bandwidth management

I mean, does simple queue (limiting customer's bandwidth) works well on RouterOS v3.22 when web cache is enabled.
On RouterOS v2.9.51 is OK.

Sorry but I sow something like that on this thread:
http://forum.mikrotik.com/viewtopic.php?f=13&t=23663
by bledar
Fri Mar 20, 2009 12:54 pm
Forum: General
Topic: Bandwidth management
Replies: 2
Views: 478

Bandwidth management

Does bandwidth management is working so well when using new proxy from mikrotik ROuterOS 3.2 as old one on version 2.9.51?

Thanks
by bledar
Fri Mar 20, 2009 12:40 pm
Forum: General
Topic: Cache Drive
Replies: 1
Views: 445

Cache Drive

Hi to all. We have RouterOS 3.2 installed on a PC with parameters:3GHz P4 processor, 1GB RAM, 80GB HDD I want to build a proxy cache for our clients but I have some fogginess. a)Please, how can I change cache-drive from system to another (for ex. with capacity 60 GB) How to find the list of availabl...
by bledar
Tue Jan 27, 2009 11:52 am
Forum: General
Topic: New IP range
Replies: 6
Views: 1146

Re: New IP range

I tried with different workstations, I tried forcing ethernet speed and duplex for my camera and the port of the router it is connected to. From the router I ping normally (with no latency) all devices. I tried to change the ethernet port of the router for LAN, but no results. All max bandwidth of t...
by bledar
Mon Jan 26, 2009 6:03 pm
Forum: General
Topic: New IP range
Replies: 6
Views: 1146

Re: New IP range

May someone help me???
BR
by bledar
Mon Jan 26, 2009 12:07 pm
Forum: General
Topic: New IP range
Replies: 6
Views: 1146

Re: New IP range

I have a scenario and IP route table like below on my MKRT: My bandwidth is 1Mbps. When I was connect from an computer with IP 192.1698.11.100 to an IP camera 192.168.12.20 the connection was slowly (gave the impression that I reached ip camera from Internet). Pinging IP 192.168.11.100 from range 19...
by bledar
Sun Jan 25, 2009 7:44 pm
Forum: General
Topic: New IP range
Replies: 6
Views: 1146

New IP range

Hello.

I need your help regarding issue like bellow:

I want to add another IP range on my local ethernet port.
I have actual range 192.168.12.0/24 and I want to add 192.168.11.0/24 ip range.

Please what config I must do?

Thanks in advance!
by bledar
Wed Jan 14, 2009 12:17 pm
Forum: Beginner Basics
Topic: External squid proxy on 2.9.x
Replies: 3
Views: 730

Re: External squid proxy on 2.9.x

Please, may someone help me regarding this issue?

Thank you in advance!
by bledar
Mon Jan 12, 2009 5:14 pm
Forum: Beginner Basics
Topic: External squid proxy on 2.9.x
Replies: 3
Views: 730

Re: External squid proxy on 2.9.x

Hello.

I have other fogginess according that tutorial, please.
1.May it works even if the IP of WAN interf is public IP (routed one)?
2.Why NAT must be disabled ?

Best regards & thank you for your help!
by bledar
Fri Jan 09, 2009 1:29 pm
Forum: Beginner Basics
Topic: External squid proxy on 2.9.x
Replies: 3
Views: 730

External squid proxy on 2.9.x

Hello. I want to build a cache system like in link below: http://wiki.mikrotik.com/wiki/Open_source_caching_server But under wan interface I want to put different IP, public one (routed ip) not private (192.168.12.11.1, 192.168.12.2) Is it possible? Or if you have any idea I will welcome them :) tha...
by bledar
Sat Nov 22, 2008 1:19 pm
Forum: General
Topic: 8dBi omni antena
Replies: 2
Views: 609

Re: 8dBi omni antena

Sorry, lets say 48mW power to antenna.

BR
by bledar
Fri Nov 21, 2008 6:18 pm
Forum: General
Topic: 8dBi omni antena
Replies: 2
Views: 609

8dBi omni antena

Hello!

We want to buy some Omni 8 dBi antennas.
From your experiences, about how meters from AP we will have good quality?

The antennas will be operate on the city area, with 15-20 meters buildings mostly.

Thank you in advance for your help!
by bledar
Wed Nov 19, 2008 10:40 am
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2294

Re: Wi-Fi Phone

OK. Thank you QpoX for your continuous support.
Have a good day.
by bledar
Tue Nov 18, 2008 12:37 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2294

Re: Wi-Fi Phone

Please, how meters about from AP goes 100mW phone covered?
Let say it will operate in full with building area.

Does it works about 80-100 meters from AP with that scenario?

Thank you for your help.
by bledar
Mon Nov 17, 2008 5:31 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2294

Re: Wi-Fi Phone

Has any body any idea regarding this thread?


THNX.
by bledar
Fri Nov 14, 2008 3:21 pm
Forum: Wireless Networking
Topic: RouterOS 2.9.51 and 3.16 upgrade
Replies: 3
Views: 895

Re: RouterOS 2.9.51 and 3.16 upgrade

Thank you Louis!
by bledar
Fri Nov 14, 2008 1:37 pm
Forum: Wireless Networking
Topic: RouterOS 2.9.51 and 3.16 upgrade
Replies: 3
Views: 895

Re: RouterOS 2.9.51 and 3.16 upgrade

Hello.

May some give us an answer regarding this issue?
Maybe forumguru or siteadmin have infos about this.

BR
by bledar
Fri Nov 07, 2008 4:14 pm
Forum: Wireless Networking
Topic: RouterOS 2.9.51 and 3.16 upgrade
Replies: 3
Views: 895

RouterOS 2.9.51 and 3.16 upgrade

Hello.

If I purchase RouterOS version 3.16 with level 5 licence, I may upgrade for free till version 5.x
What if I buy RouterOS version 2.9.51, till which release I will upgrade it for free???

Thnx.
by bledar
Wed Nov 05, 2008 8:35 pm
Forum: Wireless Networking
Topic: RouterOS 3.13 vs. 2.9.51
Replies: 8
Views: 1951

Re: RouterOS 3.13 vs. 2.9.51

If I will buy RouterOS version 3.13, I will might upgrade OS for free till version 5.x, right?
What about if I buy RouterOS version 2.9.51. Till which release may upgrade for free RouterOS?

Thanks.
by bledar
Thu Oct 30, 2008 12:34 pm
Forum: General
Topic: Duration of connected DHCP Clients.
Replies: 1
Views: 509

Duration of connected DHCP Clients.

Hello.

Please, I want to know the time duration of clients connections on my net via DHCP server.
How can I get it?

Thanks.
by bledar
Sat Oct 25, 2008 10:25 pm
Forum: General
Topic: Parent proxy on web-proxy
Replies: 4
Views: 1865

Re: Parent proxy on web-proxy

Thanks GuJack20.

Benny 30,
Squid is a part of Mikrotik RouterOS. It used on IP Web Proxy.
by bledar
Fri Oct 24, 2008 8:14 pm
Forum: General
Topic: Parent proxy on web-proxy
Replies: 4
Views: 1865

Re: Parent proxy on web-proxy

Hello


Have anyone any idea regarding this topic???
by bledar
Wed Oct 22, 2008 2:14 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2294

Re: Wi-Fi Phone

Hello.
Thnx for your info and supporting me.

Please, phone with 100mW at 2.4 GHz capability at which distance from AP works?
What dbi gain must have access point for working at maximum distance that allowing TX of phone (Nokia E51, E65) ?
by bledar
Thu Oct 16, 2008 5:07 pm
Forum: General
Topic: Parent proxy on web-proxy
Replies: 4
Views: 1865

Parent proxy on web-proxy

Hello

Please, may someone explain me exactly (maybe with one scenario) for what parent-proxy, on web proxy is used for?
Can I add another proxy cache and other proxy policies (on another machine) ?
Who will be primary (master)?

Thnx!
by bledar
Thu Oct 16, 2008 5:01 pm
Forum: General
Topic: Formating drive on web-proxy
Replies: 8
Views: 1915

Re: Formating drive on web-proxy

:-)
I think it too.
by bledar
Wed Oct 15, 2008 9:54 am
Forum: General
Topic: Formating drive on web-proxy
Replies: 8
Views: 1915

Re: Formating drive on web-proxy

when I try to format cache drive an error message appears: "Could not format disk-system drive cannot be formatted"

Please, what can I do for formatting cache drive?

Thank you.
by bledar
Tue Oct 14, 2008 5:53 pm
Forum: General
Topic: Formating drive on web-proxy
Replies: 8
Views: 1915

Formating drive on web-proxy

Hello.

If I format drive on ip web-proxy what I miss except cached data?

Thank you in advance.
by bledar
Fri Oct 10, 2008 3:32 pm
Forum: General
Topic: Mikrotik and vmware esx server
Replies: 25
Views: 10511

Re: Mikrotik and vmware esx server

Hello!

Have anyone find the way to install RouterOS on ESX?

BR
by bledar
Fri Oct 10, 2008 1:08 pm
Forum: Wireless Networking
Topic: MikrotikOS on SCASI SAS SATA
Replies: 4
Views: 1163

Re: MikrotikOS on SCASI SAS SATA

Thank you for your reply.
On ESX is anyway to build an SATA drive not an SCSI one?
by bledar
Wed Oct 08, 2008 11:35 am
Forum: Wireless Networking
Topic: MikrotikOS on SCASI SAS SATA
Replies: 4
Views: 1163

Re: MikrotikOS on SCASI SAS SATA

That mean there are no possibilities for installing Mikrotik on ESX?
Maybe with another boot floppy???

Thnx.
by bledar
Tue Oct 07, 2008 12:39 pm
Forum: General
Topic: QoS
Replies: 6
Views: 3336

Re: QoS

I will see both them.

Thank you for your help!
by bledar
Tue Oct 07, 2008 10:48 am
Forum: General
Topic: QoS
Replies: 6
Views: 3336

Re: QoS

Hello! Firstly thanks all of you for your help. God bless that was invented Forums, and this one is GREAT! I want to implement Voip technology on my net for international calls. Normally this will be done through internet connection. But I have a limited bandwidth (1.2 Mbps). This bandwidth will be ...
by bledar
Tue Oct 07, 2008 10:33 am
Forum: Wireless Networking
Topic: ip proxy Vs. web proxy
Replies: 5
Views: 1339

Re: ip proxy Vs. web proxy

Hello!

Can we dedicate a cache space on IP proxy?
Please, can someone explain how ip proxy works?

Thank you!
by bledar
Tue Oct 07, 2008 10:13 am
Forum: Wireless Networking
Topic: MikrotikOS on SCASI SAS SATA
Replies: 4
Views: 1163

MikrotikOS on SCASI SAS SATA

Hello!

I want to install MikrotikOS like a guest OS on ESX 3.5, but I have troubles.
The message that appears is: Fatal error. There is no HDD.
I have 2 datacentres, one SAS and One SATAII.
Have someone installed MikrotikOS on SCSI, SAS, SATA HDD?

Thank You in advance!
by bledar
Tue Oct 07, 2008 10:02 am
Forum: Wireless Networking
Topic: RouterOS 3.13 vs. 2.9.51
Replies: 8
Views: 1951

Re: RouterOS 3.13 vs. 2.9.51

Thank you Archibaldo for your help!
I think will going to 2.9.51
by bledar
Mon Sep 29, 2008 4:31 pm
Forum: Wireless Networking
Topic: Access restriction to web proxy
Replies: 4
Views: 1049

Re: Access restriction to web proxy

Maybe on the next releases will think about username and passw for new users on proxy?
by bledar
Wed Sep 24, 2008 10:55 am
Forum: Wireless Networking
Topic: ip proxy Vs. web proxy
Replies: 5
Views: 1339

Re: ip proxy Vs. web proxy

OK.
Thanks for your continuous support!
by bledar
Tue Sep 23, 2008 5:50 pm
Forum: Wireless Networking
Topic: Access restriction to web proxy
Replies: 4
Views: 1049

Access restriction to web proxy

Please, how can restrict access to web proxy with username &password for new users?
by bledar
Tue Sep 23, 2008 5:47 pm
Forum: Wireless Networking
Topic: ip proxy Vs. web proxy
Replies: 5
Views: 1339

ip proxy Vs. web proxy

Who is the best ip proxy or web proxy?

Thnx
by bledar
Tue Sep 23, 2008 5:39 pm
Forum: Wireless Networking
Topic: Block facebook
Replies: 37
Views: 42325

Re: Block facebook

It use many IPs.
Exist any tools or web address that find all ip addresses for each DNS?

THNX
by bledar
Tue Sep 23, 2008 3:05 pm
Forum: Wireless Networking
Topic: Block facebook
Replies: 37
Views: 42325

Block facebook

Hello!

Did anyone have block facebook.com from firewall rules?
Or maybe in another way except proxy.


Thnx.
by bledar
Mon Sep 15, 2008 11:21 am
Forum: Wireless Networking
Topic: Wireless IP Phone connected via wi-fi
Replies: 8
Views: 1484

Re: Wireless IP Phone connected via wi-fi

Thank you for your reply!
by bledar
Fri Sep 12, 2008 4:56 pm
Forum: Wireless Networking
Topic: RouterOS 3.13 vs. 2.9.51
Replies: 8
Views: 1951

Re: RouterOS 3.13 vs. 2.9.51

Thank You Changeip!

I will welcome other opinions also please.
by bledar
Fri Sep 12, 2008 3:44 pm
Forum: General
Topic: Queue simple.
Replies: 5
Views: 942

Re: Queue simple.

But, on version 3 are any queue simple limitation?
by bledar
Thu Sep 11, 2008 5:52 pm
Forum: General
Topic: Queue simple.
Replies: 5
Views: 942

Queue simple.

Hello!

Is any queue simple rules limitation?
Maybe my version of MKRT (2.9.27) support only 50?
by bledar
Mon Sep 08, 2008 4:15 pm
Forum: Wireless Networking
Topic: RouterOS 3.13 vs. 2.9.51
Replies: 8
Views: 1951

RouterOS 3.13 vs. 2.9.51

Hello.

I want to buy a RouterOS for my system Intel.
But I don't know which are the differences between 3.13 and 2.9.51.

Which of 2 do you suggest me?


Have a nice day.
by bledar
Mon Sep 08, 2008 4:03 pm
Forum: Wireless Networking
Topic: Wireless IP Phone connected via wi-fi
Replies: 8
Views: 1484

Re: Wireless IP Phone connected via wi-fi

But, what gain do normal IP phones have (phones that works 200-300m from base station)?
by bledar
Mon Sep 08, 2008 11:24 am
Forum: Wireless Networking
Topic: Wireless IP Phone connected via wi-fi
Replies: 8
Views: 1484

Re: Wireless IP Phone connected via wi-fi

Thank you for reply.

I know about ip phone antenna, but my question is: Do you know any wireless IP phone with high (higher than others) gain antenna?

I will appreciate your help.
by bledar
Sun Sep 07, 2008 11:46 am
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

I did it so but no results.

Maybe the latest mikrotik version works better regarding firewall rules???
by bledar
Sun Sep 07, 2008 10:58 am
Forum: Wireless Networking
Topic: Does firewall works on mikrotik???
Replies: 2
Views: 1087

Does firewall works on mikrotik???

Hello. I am trying to block all activity to/ from some IPs but I have no results. For ex: chain=forward src-address=87.229.24.119 action=drop chain=forward dst-address=87.229.24.119 action=drop but there are again traffic from/ to this IP I am asking, is Mikrotik's firewall valid or not. Or maybe th...
by bledar
Fri Sep 05, 2008 5:55 pm
Forum: Wireless Networking
Topic: Wireless IP Phone connected via wi-fi
Replies: 8
Views: 1484

Wireless IP Phone connected via wi-fi

Hello.

Please, I want to know how meters away from base station a wireless IP Phone can take a call normally?
Let say, at the base station is a radio with high gain antenna transmitter.
by bledar
Fri Sep 05, 2008 12:06 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2294

Re: Wi-Fi Phone

It must be wireless.

Have any one any idea?

Hi gain phone?

Thnx.
by bledar
Thu Sep 04, 2008 5:33 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

But I tried to block X ip and still I see traffic toward that IP.

How is it possible?
by bledar
Wed Sep 03, 2008 9:06 pm
Forum: Wireless Networking
Topic: Wi-Fi Phone
Replies: 14
Views: 2294

Wi-Fi Phone

Hello!

I want to create a wi-fi phone network wit omni mikrotik antena.
But I want to find any wi-fi phone with hi gain antena.

Can someone know one of these that works on about 0.5Km distance or more from base station?


Thank You for helping me!
by bledar
Wed Sep 03, 2008 9:00 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

Thank You for replies. Mu PCs are protected with clean slate. When I do a restart the computer goes on the state that I left when I activated Clean Slate. So, a little bit possibilities are that the PCs might be infected. Its bean about 3 days that I see no upload traffic toward those IPs. My questi...
by bledar
Fri Aug 29, 2008 3:05 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

No on know how to block these 2 ips ?
by bledar
Fri Aug 29, 2008 10:58 am
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

Hello!

May any one help me to resolve this problem?
I will really appreciate your help.
by bledar
Thu Aug 28, 2008 4:41 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

Hello! The "attack" still continue. But now with 2 other IPs, 64.125.23.254 & 209.249.222.45. Even from port 80 of these 2 new IPs. I tried to block these new IPs with firewall rules but no result. /ip firewall filter add chain=forward src-address=64.125.23.254 action=drop /ip firewall filter add ch...
by bledar
Wed Aug 27, 2008 2:26 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

Thank you Normis!

For my info, what was that?
by bledar
Wed Aug 27, 2008 1:32 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Re: Parasite Upload Bandwidth

OK. Tank You for your reply. I will read with attention those articles.
But please, what config I must do on firewall for blockin that activity on fastest way?
by bledar
Wed Aug 27, 2008 1:11 pm
Forum: General
Topic: Parasite Upload Bandwidth
Replies: 17
Views: 2076

Parasite Upload Bandwidth

Hello! I have upload bandwidth activity full from my router to internet. I see that the source IP is 209.249.222.27/32 (erotic site) port 53(dns) destination my LAN IPs on different ports (IPs of computers connected to LAN interface). Different port for each IP. Please, what configuration I can do f...
by bledar
Mon Jun 02, 2008 6:02 pm
Forum: General
Topic: ISP with DHCP
Replies: 4
Views: 1040

Re: ISP with DHCP

Hello.

But What gateway I must add an my IP route table?

Thanks.
by bledar
Mon Jun 02, 2008 4:22 pm
Forum: General
Topic: ISP with DHCP
Replies: 4
Views: 1040

Re: ISP with DHCP

OK I'll try it.

Thank you.
by bledar
Mon Jun 02, 2008 2:13 pm
Forum: General
Topic: ISP with DHCP
Replies: 4
Views: 1040

ISP with DHCP

Hello! I want toconnect my LAN to internet throw Mikrotik. I must connect to my ISP not with a static IP but like a DHCP client. Please how can I do it. Under IP address table what IP I must put to public interface. How about IP Routes Table? Please can someone send me the wright steps or where can ...
by bledar
Fri May 23, 2008 10:23 am
Forum: General
Topic: PAT on Mikrotik
Replies: 8
Views: 7576

Re: PAT on Mikrotik

Hello!

Let me clear something, I don't have to set any IP address for Public interface?
Please, how can I do that?

Thank you for your support!
by bledar
Thu May 22, 2008 2:47 pm
Forum: General
Topic: PAT on Mikrotik
Replies: 8
Views: 7576

Re: PAT on Mikrotik

OK I understand.
But, my ISP give me Dynamic IP Address not static one.
Please, give me an solution.
by bledar
Thu May 22, 2008 10:38 am
Forum: General
Topic: PAT on Mikrotik
Replies: 8
Views: 7576

PAT on Mikrotik

Hello!
Do Mikrotik do PAT (port address translation) ?
If yes, how can I configure it for doing that?


Thank You in advance!
by bledar
Tue Apr 29, 2008 5:23 pm
Forum: General
Topic: QoS
Replies: 6
Views: 3336

Re: QoS

Thank You for your precious information.

I will welcome any other information regarding your experiences.

Thnx again.
by bledar
Thu Apr 24, 2008 4:01 pm
Forum: General
Topic: QoS
Replies: 6
Views: 3336

QoS

Dear All.

I intend to apply the QoS roules on my mikrotik, give more priority voice packets than data packets.
Regarding your experiences, is mikrotik powerful in QoS? So, when I prioriterize voice packets does they pass through firstly?

Thank you in advance for your information.
by bledar
Wed Apr 23, 2008 4:57 pm
Forum: General
Topic: Proxy is Working but cache Hit rate is very low !?
Replies: 4
Views: 1200

Re: Proxy is Working but cache Hit rate is very low !?

Hello.

Please, explain us how can we put this on MKT? (mark a proxy cache and put a simple queue for the cache)


thank you in advance.
by bledar
Wed Apr 16, 2008 1:44 pm
Forum: General
Topic: Back up link
Replies: 2
Views: 887

Re: Back up link

Thank you Faton. I'll try it.

Faleminderit. Po te shkruaj edhe ne shqip meqe jemi shqipetar. Une jam nga Tirana.
by bledar
Wed Apr 16, 2008 12:52 pm
Forum: General
Topic: Back up link
Replies: 2
Views: 887

Back up link

Hello.

I am connecting with internet via mikrotik.
Is it possible that all the traffic to internet (vice versa) pass throw a backup line (2nd line to internet) when the first path (line) is down? Please, how can I do?

I'll welcome any solution.

Thank You.
by bledar
Tue Apr 01, 2008 5:35 pm
Forum: General
Topic: Bandwidth issue
Replies: 5
Views: 872

Re: Bandwidth issue

Why I should get latency near 80ms.
Actually, my latency is near 40ms.
by bledar
Tue Apr 01, 2008 1:59 pm
Forum: General
Topic: Bandwidth issue
Replies: 5
Views: 872

Re: Bandwidth issue

Normally at 1Mbs dadicated bandwidth, with how kBs i can download?
by bledar
Tue Apr 01, 2008 12:06 pm
Forum: General
Topic: Bandwidth issue
Replies: 5
Views: 872

Bandwidth issue

Hello. I am a little bit confused regarding download, upload, bandwidth. I have a link with dedicated bandwidth 1Mb/s. But when I try to download from a server that allow me to download with max bandwidth like microsoft.com, I just see only 70kBs(at the best). Normally I must see 128kBs converting f...
by bledar
Fri Mar 28, 2008 1:32 pm
Forum: General
Topic: blocking activity
Replies: 3
Views: 703

Re: blocking activity

Hello.
Even in that mode do not work.
I tried this one, and it works as I want.
chain=input src-address=192.168.12.17 dst-address=0.0.0.0/0 action=drop

Is this the regular mode or something strange is going on???

Thnx.
by bledar
Fri Mar 21, 2008 2:15 pm
Forum: General
Topic: blocking activity
Replies: 3
Views: 703

blocking activity

Hello! I want to block all activity, i mean download+upload for a specific IP. May I use this configuration for blocking for example ip 192.168.12.17 ? chain=forward src-address=192.168.12.17 dst-address=0.0.0.0 action=drop I tried this, but it was blocking nothing. I tried even queue roules but the...
by bledar
Thu Feb 14, 2008 12:45 pm
Forum: General
Topic: Web & IP Proxy issue.
Replies: 2
Views: 730

Web & IP Proxy issue.

Hello everybody. Please, who is the essential difference between web & IP proxy I have some questions regarding proxy: 1.Who is the best regarding fast opening web pages (cache), web-proxy or IP-proxy? 2.How can we manage memory (RAM), hdd space (cach size),cache administrator at IP-proxy as we can ...
by bledar
Wed Feb 13, 2008 12:41 pm
Forum: General
Topic: Problem limiting Bandwidth.
Replies: 1
Views: 637

Problem limiting Bandwidth.

Hello. I have 2 IP ranges on my routing table under local ethernet port 192.168.10.0/24 & 192.168.12.0/24. Please, how can I share total bandwidth (10Mbps) betwen them, respectively for 192.168.10.0/24 1Mbps & 9Mbps for 192.168.12.0/24. I tryed with /queue simple pr name="local" target-addresses=192...
by bledar
Fri Feb 08, 2008 11:08 am
Forum: Wireless Networking
Topic: 2.4Ghz Base Stations
Replies: 6
Views: 1291

Re: 2.4Ghz Base Stations

Firstly Thank You for reply.

What PCI card Do you recomande to use on the desktops to have a good performance ( longest possible range & Bandwidth)
by bledar
Thu Feb 07, 2008 9:55 pm
Forum: Wireless Networking
Topic: 2.4Ghz Base Stations
Replies: 6
Views: 1291

Re: 2.4Ghz Base Stations

Let say client is an laptop. How meters from access point it will receive good signal(without any interruption)

Tnks.

Bye.
by bledar
Wed Feb 06, 2008 6:04 pm
Forum: General
Topic: Block All activity for an specific IP
Replies: 19
Views: 80761

Re: Block All activity for an specific IP

I want to block all trafic generated from local ip 192.168.12.250. Is this the right config? \ip firewall filter chain=forward src-address=192.168.12.250 dst-address=0.0.0.0 action=drop With this one I have no results. \Please tell me if you have any nwe idea for block all the activity, even within ...
by bledar
Mon Feb 04, 2008 4:27 pm
Forum: General
Topic: Block All activity for an specific IP
Replies: 19
Views: 80761

Block All activity for an specific IP

Please, help me to block all activity for an specific IP on firewall roules.

Thank You in advance.
by bledar
Wed Jan 30, 2008 10:54 am
Forum: General
Topic: RB/KAO
Replies: 6
Views: 1136

Re: RB/KAO

Oh... thank You. You are so helpful.
by bledar
Sat Jan 26, 2008 8:28 pm
Forum: General
Topic: RB/KAO
Replies: 6
Views: 1136

Re: RB/KAO

Thank You guys for your reply.

How about VoIP, Is it OK?
Who is The best (regerdin VoIP also) 2.4 GHz or 5.8 GHz antena?
by bledar
Fri Jan 25, 2008 1:55 pm
Forum: General
Topic: RB/KAO
Replies: 6
Views: 1136

RB/KAO

Hello!

Can some one tell me in how Km distance trasmit this 2.4 GHz wi-fi acess point:
http://www.mikrotik.com/pricelist.php?sect=3#product20

Thank You in advance.
by bledar
Fri Jan 25, 2008 12:22 pm
Forum: Wireless Networking
Topic: 2.4Ghz Base Stations
Replies: 6
Views: 1291

2.4Ghz Base Stations

Hello!

Can some one tell me in how Km distance trasmit this 2.4 GHz wi-fi acess point:
http://www.mikrotik.com/pricelist.php?sect=3#product20

Thank You in advance.
by bledar
Thu Jan 24, 2008 2:30 pm
Forum: General
Topic: Total bandwidth share among 2 local ports
Replies: 2
Views: 1321

Re: Total bandwidth share among 2 local ports

If I use Simple Queue roules, the same work will do fine with only one ethernet card.

What benefits I'll have with ether3, I mean with having 3 ethernet ports.
Only different range of IPs?
by bledar
Thu Jan 24, 2008 11:13 am
Forum: General
Topic: Total bandwidth share among 2 local ports
Replies: 2
Views: 1321

Total bandwidth share among 2 local ports

I have installed a Mikrotik OS on one PC with 3 ethernet cards, 1 for public trafic and other 2 for local traffic.
Total download/upload bandwidth is 1024 kb/s.
How can I share the bandwidth for my local ports with fixed bandwidth,exatly 864 kbs for one and 160kbs for other ethernet port.

Thank you.
by bledar
Thu Jan 24, 2008 10:45 am
Forum: General
Topic: Block an http address
Replies: 1
Views: 1110

Block an http address

Hello.

Please can someone tell me what config. I must do for blocking an http address (example:http://www.msn.com) with web proxy roules?

Thank you in advance.
by bledar
Fri Jan 18, 2008 12:59 pm
Forum: General
Topic: Buing a license from Mikrotik. Steps Please.
Replies: 2
Views: 595

Buing a license from Mikrotik. Steps Please.

Please, can someone tell me the write steps that I must follow for buing a license @ mikrotik official website?
by bledar
Fri Jan 18, 2008 12:46 pm
Forum: General
Topic: Setting up Voip Network
Replies: 4
Views: 947

Re: Setting up Voip Network

Thnx

It was very helpful.
by bledar
Thu Jan 17, 2008 10:08 pm
Forum: General
Topic: Setting up Voip Network
Replies: 4
Views: 947

Re: Setting up Voip Network

Thank You For Your Support.

Do You know any Open Source PBX for VoIP?
by bledar
Wed Jan 16, 2008 5:38 pm
Forum: General
Topic: Setting up Voip Network
Replies: 4
Views: 947

Setting up Voip Network

Hello. I want to setup a simple VoIP Network . That consist in: 3 IP Phones (that must talk with each-other) and 1 gate keeper (Mikrotik gatekeeper). One Phone may connect with gatekeeper via internet and other 2 locally. Please, tell me the required steps for doing that on MKT? Thank You in advance!
by bledar
Wed Dec 26, 2007 1:18 pm
Forum: General
Topic: Upgrste RouterOS
Replies: 3
Views: 683

Re: Upgrste RouterOS

Sorry I mean till 01.01.2008
by bledar
Tue Dec 18, 2007 5:57 pm
Forum: General
Topic: Upgrste RouterOS
Replies: 3
Views: 683

Upgrste RouterOS

Hello.

Router license allows to upgrade O.S. till 01 janary 07

Please can someone tell me how to upgrade it? In which mode?

Thanks.