Community discussions

MUM Europe 2020

Search found 50 matches

by niamul
Tue Sep 05, 2017 11:40 am
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 27075

Re: v6.40.3 [current]

is it me or is something wrong with ipv6? 2404:ac80::b/64 becomes 2404:ac80::/64. is that normal? just upgraded to 6.40.3. should i downgrade? I don't see such an issue. But you provide too little detail to comment. what information would you like? ipv6 address add address=2404:ac80::b/64 interface...
by niamul
Tue Sep 05, 2017 6:44 am
Forum: Announcements
Topic: v6.40.3 [current]
Replies: 95
Views: 27075

Re: v6.40.3 [current]

is it me or is something wrong with ipv6?
2404:ac80::b/64 becomes 2404:ac80::/64.
is that normal?
just upgraded to 6.40.3. should i downgrade?
by niamul
Fri Jul 07, 2017 8:14 pm
Forum: General
Topic: x86 Question
Replies: 0
Views: 347

x86 Question

Hello, We have been using CCR's exclusively for PPPoE and other services. recently, as our clients have increased, we are seeing a limitation with possibly pps. i am attaching an output rx-packets-per-second: 1 014 638 rx-bits-per-second: 7.8Gbps fp-rx-packets-per-second: 1 014 638 fp-rx-bits-per-se...
by niamul
Fri Jul 07, 2017 8:02 pm
Forum: SwOS
Topic: CSS326-24G-2S+ management
Replies: 5
Views: 1517

Re: CSS326-24G-2S+ management

Dear becs, thank you for writing back. that is what we had done. in our case though, we used real ip 123.123.1.2/30, with 123.123.1.1/30 being elsewhere since there is no way to add a default gateway to the switch, we could try switching the IP's, though i'm not too sure how that would work. are the...
by niamul
Thu Jul 06, 2017 2:17 pm
Forum: SwOS
Topic: CSS326-24G-2S+ management
Replies: 5
Views: 1517

Re: CSS326-24G-2S+ management

the problem here is the vlan 1

this switch will sit far far away from where i'm at and enabling vlan1 on a network is a no no for me.

hence i'm looking for an alternative.
by niamul
Thu Jul 06, 2017 9:15 am
Forum: SwOS
Topic: CSS326-24G-2S+ management
Replies: 5
Views: 1517

Re: CSS326-24G-2S+ management

i found this while browsing the forum "NOTE: The management IP for the switch is handled a bit differently. You must create a Vlan1 with ID=1 on the physical interface that will trunk to the switch. Then bind your management IP to that Vlan1 interface. In the example above, you would bind 192.168.88...
by niamul
Thu Jul 06, 2017 9:00 am
Forum: SwOS
Topic: CSS326-24G-2S+ management
Replies: 5
Views: 1517

CSS326-24G-2S+ management

Hello, we have just got our hand on a CSS326-24G-2S+ and trunk and access ports work as they should and we were able to configure them with the old documents from mikortik. we are stuck on the management IP part. we need to set the management ip 10.0.0.1/29 on vlan 100 so that we can access the swit...
by niamul
Thu Jul 06, 2017 8:33 am
Forum: SwOS
Topic: css326-24g-2s+rm VLANs
Replies: 14
Views: 8714

Re: css326-24g-2s+rm VLANs

simple question,
management vlan on a trunk port

i want to use the sfp+ port to send vlan 5,9,11,33,23,43 where management vlan will be 43.
how do i go about setting it up on the switch?
by niamul
Wed Jun 28, 2017 7:43 pm
Forum: General
Topic: Interface shows R (running) when it's not
Replies: 9
Views: 1444

Re: Interface shows R (running) when it's not

x86 by default have disabled running check.
Set disable-running-check=no for Ethernet interfaces.
Where would we find this?
by niamul
Wed Jun 28, 2017 7:36 pm
Forum: General
Topic: IPv6 /127
Replies: 13
Views: 3714

Re: IPv6 /127

This actually makes a lot of sense

Basically *::/64 in a pool won't work but *::1/64 will work on the pppoe or dhcp?
Then again you can't set a pool for pppoe with *::1/64

Any work around it?
by niamul
Wed Jun 28, 2017 12:37 pm
Forum: General
Topic: PPPoE over dual stack
Replies: 2
Views: 936

Re: PPPoE over dual stack

PPPoE because 3 factor authentication, no other reason. it can only delegate to another router unfortunately, at least that is what the documents have said so far. i do get ipv6 and ipv4 ip through pppoe based on what i have done but the ipv6 doesn't route. the router i connect to routes it's own ip...
by niamul
Tue Jun 27, 2017 6:34 pm
Forum: General
Topic: PPPoE over dual stack
Replies: 2
Views: 936

PPPoE over dual stack

hey guys, i'm not sure how far mikrotik has come regarding ipv6 but i'll ask anyway. how do i go about deploying ipv6 along with ipv4 over pppoe? i'm not talking about dhcp here, i want to give out ipv6 addresses from a pool, the same way it is given out over ipv4. has anybody gone ahead and tried t...
by niamul
Tue May 02, 2017 12:26 pm
Forum: General
Topic: Logging web traffic to remote webserver
Replies: 33
Views: 10216

Re: Logging web traffic to remote webserver

Dear rextended,
thank you for the help. it has really saved me.
cheers
Niamul
by niamul
Wed Apr 12, 2017 4:44 pm
Forum: Scripting
Topic: Logging visited urls
Replies: 7
Views: 3526

Re: Logging visited urls

netflow will not do private ip, will it?
plus it's going to take a massive amount of resource to host a server that can collect info from let's say, 15000 clients.
that would require static private ip being given to all clients.
is there any other way?
by niamul
Fri Dec 23, 2016 11:09 am
Forum: General
Topic: v6.36.4 problem with traffic balancing on bonding interface
Replies: 1
Views: 620

Re: v6.36.4 problem with traffic balancing on bonding interface

What is the config at the other end?
by niamul
Fri Dec 23, 2016 11:05 am
Forum: General
Topic: The Best way to limit traffic
Replies: 2
Views: 779

Re: The Best way to limit traffic

I take it one is local internet exchange and the other is upstream? Do you want to limit total bandwidth of a client regardless of destination? If so, simple queue with target address and bandwidth will do. If your intention is to use the local exchange more, then are you getting routes from them vi...
by niamul
Tue Sep 06, 2016 9:05 pm
Forum: General
Topic: Ros 6.35.4 and telnet
Replies: 0
Views: 327

Ros 6.35.4 and telnet

Hello everybody, We are having a strange issue with ros 6.35.4 on a ccr 1036 8g 2s+ We use the net watch service to get email alerts regarding which of our clients or switches in our distribution network has gone down and come up. The switches run on a vlan that is only for the switches management a...
by niamul
Sun Jul 24, 2016 11:08 am
Forum: General
Topic: Crs 125 & pppoe / dhcp
Replies: 0
Views: 369

Crs 125 & pppoe / dhcp

Hey guys, We have a crs 125 connected from a switch via sfp1. We set access port on sfp2 for vlan 200 and connected that to another switch and connectivity for dhcp or pppoe works if connected from a pc directly, didn't work through WiFi router. We tried from the single Ethernet port but we get the ...
by niamul
Sat Mar 19, 2016 8:51 am
Forum: General
Topic: Reset a CCR
Replies: 1
Views: 9200

Reset a CCR

Hello,

a client of ours has a CCR and he has forgotten the password. we know there is a way to reset an RB device, can the same be done for a cloud core router?

any help on the matter would be appreciated.

thank you
Niamul
by niamul
Thu Oct 01, 2015 7:11 pm
Forum: General
Topic: Leaking of upstream
Replies: 7
Views: 938

Re:

So look at the traffic what is it... Use torch. My guess is that you are part of dns amplification attack. Don't you have your dns service available to public, do you?
This dude is right. Block access to your udp and tcp port 53 on your wan interface
by niamul
Thu Oct 01, 2015 7:02 pm
Forum: General
Topic: High cpu
Replies: 1
Views: 392

High cpu

Hello guys and girls, We have a CCR 1036 8g 2s+ -We have three bgp sessions and a single ospf. -1 masquerade -no firewall rule -We run about 2.5g through it -Has ten simple queues this is where my disappointment starts. The queues range from 100mbps to 850mbps and when they hit full, the cpu hits 65...
by niamul
Thu Aug 06, 2015 9:14 pm
Forum: General
Topic: Direct attach cable question
Replies: 2
Views: 566

Re: Direct attach cable question

Yeah, it works with Bdcom 5612 switch
You guys might want to check out their switches, 12x10g ports, 8 ETH 1g port with 180gbps back plane at about 2k usd
by niamul
Wed Aug 05, 2015 9:19 pm
Forum: General
Topic: Direct attach cable question
Replies: 2
Views: 566

Direct attach cable question

Hey guys, We have multiple ccr's that run in our network. Our edge router is a Cisco and we use the CCR's for distribution. The ccr's are in turn connected to a Bdcom s5612 switch via 3m direct attach cable that we purchased from mikrotik. The Bdcom switch has 12x10g ports and 8x1g ETH ports. What I...
by niamul
Wed Aug 05, 2015 9:06 pm
Forum: General
Topic: Simple Queue not working when Fasttrack enabled
Replies: 28
Views: 20114

Re: Simple Queue not working when Fasttrack enabled

We have multiple queues running and I would like to enable fast track for just one user. How do I go about doing that? Would that be done by using the source ip? Or is fast track for everybody or nobody?
by niamul
Wed Feb 11, 2015 1:06 pm
Forum: General
Topic: "TX Drop" error on Vlan interface
Replies: 7
Views: 3194

Re: "TX Drop" error on Vlan interface

how do you manage to change the queue type on a vlan? please help because i'm getting the same problem
by niamul
Fri Jan 23, 2015 3:50 pm
Forum: General
Topic: RouterOS v6.25
Replies: 110
Views: 32718

Re: RouterOS v6.25

after upgrading to 6.25 on my ccr1016-12g we are seeing higher cpu usage and lower bandwidth consumption. we have simple queues, dhcp and pppoe running and dns cache. cpu usage hitting 85 to 90% bandwidth consumption dropped from 700mbps to ~550mbps on the same config as before has some config chang...
by niamul
Sat Sep 13, 2014 5:32 pm
Forum: General
Topic: multiple wan issue
Replies: 2
Views: 776

Re: multiple wan issue

But now the client complains that bandwidth drops randomly on his other connection. Considering he is doing bgp on his other connection and there is no static route on the other interface, I can't figure out where the problem is
by niamul
Fri Sep 12, 2014 1:03 pm
Forum: General
Topic: ISP gives block of 16 address -- Need help configuring plz!
Replies: 9
Views: 5068

Re: ISP gives block of 16 address -- Need help configuring p

ip address add address=180.185.160.210/28 interface=lan (whichever interface you want to distribute from)

ip route add dst=180.185.160.208/28 gateway=71.165.180.193

your isp also has to route the ip address block.

that should do the trick.
by niamul
Fri Sep 12, 2014 12:08 pm
Forum: General
Topic: multiple wan issue
Replies: 2
Views: 776

Re: multiple wan issue

ip route add dst=203.189.231.6 gateway=203.189.231.1

that is how its done
by niamul
Thu Sep 11, 2014 4:16 pm
Forum: General
Topic: multiple wan issue
Replies: 2
Views: 776

multiple wan issue

hey guys, here is the scenario mikrotik with 5 interface. the first 3 are connected with isp1 and has bgp on all 3, with separate peering ip interface 4 is connected to isp2 with a /30 peering ip and not running any bgp or any routing protocol. interface 5 connects to a switch and distributed. the c...
by niamul
Mon Sep 08, 2014 8:50 pm
Forum: General
Topic: High priority Bandwidth for 10 IP addresses
Replies: 3
Views: 1887

Re: High priority Bandwidth for 10 IP addresses

Increase priority of your 10 IP addresses to 6 or higher; default is 8. So when they need bandwidth, they will get it. Add your dhcp clients to the bottom, they're is an automated way to do so.
Hope that helps
by niamul
Sun Aug 10, 2014 12:35 pm
Forum: General
Topic: pppoe and consumer wifi
Replies: 1
Views: 724

pppoe and consumer wifi

Hello, we have a client who is running a pppoe server on a ccr 1016 on 6.18. his pppoe clients connect fine but those using a wifi router cannot connect. mtu set to 1488 and on client wifi, mtu is set to auto; they have tried with 1480 as well. pppoe server authentication protocol is pap one session...
by niamul
Wed Jul 02, 2014 4:44 pm
Forum: General
Topic: simple queue time scheduling problem
Replies: 5
Views: 1375

Re: simple queue time scheduling problem

thank you

if i now have a question regarding dhcp and mikrotik, would you be able to help?
by niamul
Tue Jul 01, 2014 2:00 pm
Forum: General
Topic: simple queue time scheduling problem
Replies: 5
Views: 1375

Re: simple queue time scheduling problem

red is for equal to "not active at the moment", blue is for "overlapped" black is for "working" grey is for "disabled" one hint: use 20:00:00 -> 23:59:59 and 00:00:00 -> 07:59:59 and 08:00:00 -> 19:59:59 thank you rextended i'll give that a go but why a time on the third one? if you would kindly el...
by niamul
Tue Jul 01, 2014 12:49 pm
Forum: General
Topic: simple queue time scheduling problem
Replies: 5
Views: 1375

simple queue time scheduling problem

hey guys thanks first for having a look. i'm having an odd problem. i have a client and he needs an extra 5mb bandwidth at night from 8 pm to 8 am. during the day he uses 15mb. i created three simple queue, the first with the time and the second without. the problem is, when i add 20:00:00 to 00:00:...
by niamul
Tue May 13, 2014 9:37 am
Forum: General
Topic: installation of ros 6 from usb to hdd
Replies: 4
Views: 2162

Re: installation of ros 6 from usb to hdd

was finally able to install it with a CD.
Sadly it's only recognising 2gb ram and I've got 4gb installed.
I suppose it's the limitation
by niamul
Mon May 12, 2014 6:06 pm
Forum: General
Topic: installation of ros 6 from usb to hdd
Replies: 4
Views: 2162

Re: installation of ros 6 from usb to hdd

It's installing on the usb drive instead of the hard drive. Doors the drive work in ahci mode? Or will it have to be in legacy?
by niamul
Mon May 12, 2014 2:51 pm
Forum: General
Topic: installation of ros 6 from usb to hdd
Replies: 4
Views: 2162

installation of ros 6 from usb to hdd

hey guys, here is the problem. i have a pc and i have a pen drive. i have the netinstall.zip and routeros612.iso how do i copy or boot from the pen drive and then install the os onto the hard drive? i've been trying for a while by making bootable pen drives but in the end, it installs itself on the ...
by niamul
Wed Apr 30, 2014 12:58 pm
Forum: General
Topic: Credit Card Authorisation
Replies: 0
Views: 450

Credit Card Authorisation

Hello, I have tried to get my credit card authorised. i checked with my bank and they don't seem to have any auth code from www.mikrotik.com the only extra number that shows up on the statement, i have tried that but it is not working. how do i go about solving this problem? agreed it's a silly prob...
by niamul
Fri Mar 18, 2011 1:24 pm
Forum: General
Topic: v5rc11 is out!
Replies: 68
Views: 14401

Re: v5rc11 is out!

My config OS: RouterOS 5.0rc10 -> using as pppoe server Mobo: EVGA P55 Classified 200 Processor: i7 870 (quad core) Ram: Kingston value ram 1333mhz - 2gb Hdd: 320GB Samsung Ethernet: Micronet sp2612e (4 of them) Psu: thermalteke 450w i was running rc10 and the problem i was having was that out of 6 ...
by niamul
Fri Feb 25, 2011 5:16 pm
Forum: General
Topic: Ethernet Problem
Replies: 5
Views: 1276

Re: Ethernet Problem

all the cards on the pci-e ports go to a 3750g -> all gbits with same port/frame/speed/duplex config 1 of the 2 that are on the motherboard (built in) go to the same 3750g like the other 4 and 1 of the on-board Ethernet go to a 2900 (100mbit) port. the on-boards both work. the problem i have is with...
by niamul
Thu Feb 24, 2011 11:04 am
Forum: General
Topic: Ethernet Problem
Replies: 5
Views: 1276

Re: Ethernet Problem

i have sent the mail

thank you
by niamul
Thu Feb 24, 2011 9:23 am
Forum: General
Topic: Ethernet Problem
Replies: 5
Views: 1276

Re: Ethernet Problem

i have found that 3 sets of irq are being shared by 6 Ethernet
5, 10 and 11

could that be an issue? is there any way to set irq from mikrotik in case there is conflict?
by niamul
Thu Feb 24, 2011 6:51 am
Forum: General
Topic: Ethernet Problem
Replies: 5
Views: 1276

Ethernet Problem

OS: RouterOS 5.0rc10 -> using as pppoe server Mobo: EVGA P55 Classified 200 Processor: i7 870 (quad core) Ram: Kingston value ram 1333mhz - 2gb Hdd: 320GB Samsung Ethernet: Micronet sp2612e (4 of them) Psu: thermalteke 450w The motherboard has two on-board gbit using the Marvell 88E8057 chip-set. th...
by niamul
Tue Jan 11, 2011 9:12 am
Forum: General
Topic: Best Cpu for RouterOS x86.
Replies: 21
Views: 18126

Re: Best Cpu for RouterOS x86.

Hey Guys this is the output for /system resource print and pci uptime: 18w6d1h19m59s version: "3.23" free-memory: 899980kB total-memory: 1026652kB cpu: "Intel(R)" cpu-count: 2 cpu-frequency: 2797MHz cpu-load: 65 free-hdd-space: 75388kB total-hdd-space: 116661kB write-sect-since-reboot: 37637840 writ...
by niamul
Sun Aug 15, 2010 5:41 am
Forum: Scripting
Topic: Radius + Mikrotik PPPOE
Replies: 3
Views: 1123

Re: Radius + Mikrotik PPPOE

What would be suggested for authentication? Using custom built for user profile and auth
by niamul
Sat Aug 14, 2010 11:40 am
Forum: Scripting
Topic: Radius + Mikrotik PPPOE
Replies: 3
Views: 1123

Radius + Mikrotik PPPOE

Hello everybody. i am using mikrotik 3.23 OS for PPPOE server. what i now want to do is have the ability to disconnect pppoe users by sending a script from the radius server. i.e. i change the package of a client. so now i want to disconnect the client so that when s/he signs in again, they sign-in ...
by niamul
Sat Oct 10, 2009 7:24 am
Forum: Beginner Basics
Topic: simple queue timing + priority
Replies: 7
Views: 1345

Re: simple queue timing + priority

yes it worked.
thank you so much :)
by niamul
Thu Oct 08, 2009 11:54 am
Forum: Beginner Basics
Topic: simple queue timing + priority
Replies: 7
Views: 1345

Re: simple queue timing + priority

Thank you
will test and get back to you
by niamul
Tue Oct 06, 2009 1:07 pm
Forum: Beginner Basics
Topic: simple queue timing + priority
Replies: 7
Views: 1345

simple queue timing + priority

hello i have a mikrotik server 3.2 i have about 10 clients. some are corporate clients and some are distributors themselves. what i want to do is limit bandwidth for the corporate clients after a certain time. lets say i want to give them 256k/256k from 7 am to 7 pm and then 128/128k from 7pm to 7am...