MikroTik

alternativi

Hello everybody, can you tell me how can i change grapch disign because i was to a friend and i saw that the graph wasn't same with mine..

look the mine i think its default graph

ggraff.JPG

and the friend graph was other...does anybody have any advice..

alternativi

Hello everybody, i wanna ask you something..

i have seen the ip addreses that are added with xx.xxx.xxx.xx/30, and /24, and /29, and /23, but can anybody tell me what are for example /8, /5, /6, can anybody write here all /x ip addressess and what are they used for..

ThankYOu

alternativi

Hi all ; Glad to write here again . yes disabling the forwarding for any server or interface means that you disable the link between the clients , so they can not communicate between each other and only will go to their gateway for internet . Also if you used pppoe server then every client will see...

alternativi

i dont know my friend, what you mean , but the only thing that i wanna do is that the costumers cannot ping nothing.., but just costumers, because if i dont ping the router i cannot access in it..

alternativi

Hello everybody,somebody talket to me about dos attack filter, and does anybody can tell me how to block it..i mean the firewall filter..

WIth RespeCt AlTerNATiVI

alternativi

upload a web page(with a nonpayment notice) to a web server, make a address list named= nonpaid user, add non paid user ip to that address list, then make dat nat rule with src-address= nonpaid user and dst-nat to your web server ip and port. Thanks maybe it would be helpful to you. so my friend, i...

alternativi

thank you very much my friend it worked..ByeBye

alternativi

how are the customers connected to each other? over a switch/hub? in that case there is nothing you can do. they are connected with bridge antena (wireless) in sector (2.4 Ghz), and normally that they can ping each other bridge antena..so i wanna block this ping, like when the customer use DHCP the...

alternativi

can you tell exactly what you want because i dont understand this..

alternativi

i tryed , and connection refused , i tryed in 22 port, 23, 80 and the same for all..

alternativi

i really think that he is lying because i tryed to scan another router, with ISA Server, and he found the same port, and i think he is lying..THankYou VeryMuch

alternativi

i have firewall rules to,but i just wanna know is it anything danger about my router because i have firewall rules, rest accept and rest drop..

alternativi

Hello everybody, i have a program,it called Port Scanner, and when i scan my router, few ports are opened, i have disabled ports in ip services but they are opened some else ports, i will tell the photo, and somebody can tell me how can i block these ports, or close them..Bye

alternativi

does anybody have any advice about block pingin to my customers, because everyday they try to enter in other customer bridges...and i cannot change 200 password bridges for a day..

alternativi

hello everybody i have a pc router, with 5 Pc Card, 4 Sectors ( 2 Vertical, 2 Horizontal), and one Omni all of them are 2.4 Ghz, but i dont know which cannels are better for these, because sometimes they create interferance to other sektors..can anybody tell me what frequency use for these 5 interfa...

alternativi

man i dont know, if you understand me, i wanna block ping for other ip addressess, because if i drop pinging then i can't access on it, so i wanna block pingin for other clients, and just my private ip address that i use in my pc have access in the router...

Hope that you understand me..With REspeCt

alternativi

exactly secure is because can he steal internet, because when i redirect his ip address to this webserver if he is online in msn, he can write msn, until i disable his bridge and then i cannot work in internet..the protocol is TCP

alternativi

hello everybody,i have made a Web Server, and when the clients dont pay, i add ip addresses in firewall rules but i wanna know it is secure..

alternativi

Dropping all ICMP is a bad idea, as you will drop things you don't want to. To just block pings, drop ICMP type codes 8 and 0 (recho request and reply). You can configure that in the firewall rules... yes i just wanna block pings, drop ICMP type codes 8 and 0, but can you tell me how to configure t...

alternativi

can anybody tell me how can i block pingin from my customer's to my routers.., so when they try to ping my ip router xxx.xx.xx.x to block theyre ping..if it is any rules tell me it, or it is possible to be ablle just an ip address to ping the router..

With ReSpeCt AlteRnatIVi

alternativi

thank you very much

alternativi

1. Completely disable web proxy until you get the basics working.
2. Delete your existing firewall rules and try:

chain=srcnat action=masq

chain=dstnat action=accept

add these rules with ip address or without ip address (src address) or *dstaddress)

alternativi

can anybody give me any suggestion because i need it very much..or tell me how ti make this work or give me any other advice..

WithResPect AlternATIvi

alternativi

any advice..

alternativi

[admin@Mikrotik] ip firewall nat> pr Flags: X - disabled, I - invalid, D - dynamic 0 chain=srcnat src-address=0.0.0.0/0 action=masquerade and in webproxy in access this is added: Flags: X - disabled, I - invalid 0 ;;; block telnet & spam e-mail relaying dst-port=23-25 action=deny and in cache is...

alternativi

in Filter Rules i dont have nothing added, and in Nat ijust have added an srcnat rule with 0.0.0.0/0 and masquerade nothing else..

thankYOu

alternativi

[admin@MikroTik] interface pppoe-client> print Flags: X - disabled, R - running 0 R name="Alternativi" max-mtu=1300 max-mru=1300 interface=Public user="alternativixx" password="123456" profile=default service-name="" ac-name="" add-default-route=yes ...

alternativi

the problem is, i have switched the internet in Mikrotik, and the webPages works well, but i cannot open the MSN , 7.5 and 8.1. It says Troubleshoot..

its any problem with Mikrotik or what

alternativi

its a problem here..i tried to configure this and it works, and about DNS Detect i have download a program and it works to, but can anybody tell me its the same connection like PPPoE in Mikrotik, and ADSL ..

hope that you understand me.

alternativi

Enable the DNS lookups on the mikrotik and point the DNS server to your MT in DHCP. where is DNS lookups and tell me the procedure of pointing DNS server in MT DHCP... because my friend i have configured it and it worked but when i setup the DHCP server i knew the DNS, but in other connections i do...

alternativi

i have a little question to DHCP Server..

when i setup DHCP server its DNS Address, but what happen if i dont know the ADSL dns

alternativi

my friend i have set up a Web server Linux..and i have a real Ip addres and i have redirect to me it works well...

alternativi

thank you man very much it workeeed..

alternativi

does anybody have any answer please, cause i need it verymuch..

THankYOu

alternativi

ha gmsmstr do you have any answer because i need it very much..?

alternativi

man, this is my first configuration from DSL, so i need to go in Interfacce and add a PPPoe Client, in PPPoE client i have to select the Interface and in Dial Out i see that are User and password, have i to write here the username and password of DSL connection? then i will add an address xxx.xxx.xx...

alternativi

Does your DSL require PPPoE? Does your DSL issue IPs via DHCP, or is it static? Does it hand out private or public IPs to your computer if you directly plug it in Do you want to firewall and NAT your computer? Is the goal just traffic shaping? My DsL require PPPoE My DSL issue IPs via DHCP i cannot...

alternativi

listen my friend, i have ADSL connection, so from MODEM it comes in Pc, but i want that from modem put in Mikrotik, and then from Mikrotik take normaly internet.

ADSL (MODEM) ----------- Mikrotik Router ---------- Pc(ethernet connection)

alternativi

does anybody have any answer please because i need it very much!

alternativi

Hello everybody, i have a connection with ADSL, and can anybody tell me how can i configure Mikrotik Router and switch Internet from ADSL modem to another PC..

With ReSpect AltERnATivi

alternativi

Hello everybody, i have a connection with ADSL, and can anybody tell me how can i configure Mikrotik Router and switch Internet from ADSL modem to another PC..

With ReSpect AltERnATivi

alternativi

what is the maximum of ip address, because since today i knew that the maximum of ip address is 253,,is any ip address more than 510.

THankYOu

alternativi

it helped to me.. thank you verymuch

alternativi

Hello, im using Lan Internet, but its DHCP, but can anybody tell me what is the different of 255.255.255.0 and 255.255.254.0, because 255.255.255.0 it when i add x.x.x.x/24 ip address, but i dont know what is the 2nd..

THank|YOu

alternativi

ok man i understand you, but i mean in ip firewall i have selected Protocol 6 (tcp), and in Action the port is 0-65535

so what is different of tcp, icmp, udp..

alternativi

hello, i have made a web server and in Nat Firewall i have redirect ip client to this ip web server, but what is the different of the Protocol..for example what happen when i chose 1(icmp),2 igmp,6(tcp),17 udp etc..etc, dont forget something, im wanna redirect this client, and stop the internet work...

alternativi

look,.. Customer ip:192.168.2.1/30 ROuter Ip:172.29.29.2/30 i want to block pinging Router from Customer..and the only person that i want to ping the router is me(and have access on it).. Hope that you understand..thankyou got it. All you have to do in that case is one rule. Something like: / ip fi...

alternativi

look,..

Customer ip:192.168.2.1/30
ROuter Ip:172.29.29.2/30

i want to block pinging Router from Customer..and the only person that i want to ping the router is me(and have access on it)..

Hope that you understand..thankyou

alternativi

hello everybody, i have some routers, but some customers detect their Ip, and the can ping them..can anybody tell me how can i block pinging to their customer just my ip address..but i must have access on it with WinBox

alternativi

Hello, i have set up a Hotspot, and i have addedd in ip bindings but why some maccaddress are Dynamic and some are P, its any problem for Dynamic or what..

alternativi

my friend, i wanna consult about this job, im using static Ip, and working with macc address and simple queues for each customer..But now i have set up a hotspot, because when a client dont pay to me , i will remove it from ip Bindings, and in hiw homepage it will alert you have to pay...., so tell ...

alternativi

yes i wanna leave current simple queues, but tell me where i can select hotspot dynamic queue...

its on queue type (hotspot-default)...??\

tell me where can i change it

respect..

alternativi

does anybody have any advice, please help me because i need it very much..

alternativi

i tried in Users, Profile i tryed to add a profile but nothing happens in queues.

in the queues its onlu Hs-Wlan1 with 0.0.0.0/0 ip address, so if you can send me the command how to make this..

Thank youu

alternativi

Erm.... well, what exactly do you want to do? DO you want to do bandwidth management for each user or what? Read the documentation on the subject rate-limit again in the user profile you just created you can set the bandwidth and busrting that you want to give each customers right there. This will ...

alternativi

man thankyou it worked well, i have just a little problem,,i have xx clients, and i have all queues xxx.xx.xx.0/24 , but when i add a hotspot in queues adds a hotspot queue 0.0.0.0/0, and then the queues of clients xxx.xx.xx.0/24 dont work, how can i do to work these queues when i add hotspot server...

alternativi

i have a router and i have 3 wlan interfaces, and for every client i have simple queue, so when i set up hotspot in simple queue adds and hs-Wlan queue 0.0.0.0/0 address, so how can i leave queues for everyclients..

alternativi

my friend, i tried in ip bindigs to add the macc address of clients but, again when i change the ip, he work in internet(type-bypass), if you can explain this ..

THankYOuu

alternativi

thank you, it worked well:D

alternativi

man thank you it worked well, but its any kind of security, because maybe the client can change the ip and he can add the ip of other client(that i have added in ip Bindings), so how can i do that this client can not work in internet without Login and Password even if he change the ip address..Thank...

alternativi

Hello i need help i hotSpot, i make an HotSpot for wlan1 interface, and when i open Internet browser it opens Login page, but i wanna know how set up this PAge Brower just for some clients in this Interface not for all..

WIth Respect AlterRnaTivi

alternativi

hello, i have set up a Hotspot, wlan1 Interface, and every client that open Internet Explorer it alert message LOGIN, and PAssword, but i wanna know how can i make these alert to few clients not to all..for example 192.168.24.10,192.168.24.30,192.168.24.66..etc not for example 192.168.24.1/24 Thank ...

alternativi

man if you know i use Mikrotk OS, and i dont know where i can find 404 error Text ad edit it, so tell me ...fo here and edit this text and ....

alternativi

ok my friend, i like this metod, but if you can tell me how to do this, maybe its simple for you but for me no,so tell me all procedure..how to redirect to webserveru, how tro modifi the 404 ...etc,,Thank you..or you i can give my email address ylberi_boy@januzaj.com..and talk about thiss..Bye

alternativi

Hello everybody, i have few of firewall filter, so can anybody tell me how can i export these filters to another Router..

alternativi

man, maybe you are expert in this job, but im not, and this is my big problem, so please tell me an advice how to do this, tell me all procedure please..

WIth repsSEct AlterNatVi

alternativi

Hello. Do you just want to warn your customer who haven't paid? I make one rule to them, they must pay in advance. Or, if you want to send message via your PC, and if you're using windows as your operating system, from the command prompt type msg .... (for complete structure of this command, try to...

alternativi

i dont know what kind of connections you use..
i use 2.4 Ghz, and in Wlan Interface in General you have the number of connectionsyou can limit it:D:D

alternativi

what is NPK,im begginer in this job,can you exactly explain me how to do this, i think it should be a script to make this alert!

Thank youu..

i think you dont know exactly what i asked to you!however do something and tell me how to do this..

alternativi

tell me the procedure how can i upgrade it..and when you tell me how to upgrade,then tell me is there any script or what i have to do to alert him ..

thank you..!

alternativi

my friend, i just wanna alert him, if you dont pay, nothing else, because i will disconect it ..but i just wanna say to him, if you dont pay you will be dissconected..

Thank you very much

P.S i think its any script to send that text to his desktop computers, or something like this..

alternativi

Hi everybody, im tired from my costumer, the dont pay regulary, i need hel from you, i need something to send to their computers, and to say "Dear Costumer, if you dont pay until x.x.xxxx, you will be dissconected".. please somebody help me im in trouble.. With Respect Alternativi I Use Mi...

alternativi

so what is the differend of Dynamic ARP, and STATIC ARP??, and please can you give me youre email address..we will talk better..thank you

with respect

alternativi

i use static Ip address, and all ip address are x.x.x.x/30

THANK YOUU..

alternativi

man, i dont know , i need help, so what do you suggest me? i think that suggestion tell me how can i do that thing

alternativi

mac address clones to 50-95% of costumer, and these costumer dont have internet connections until i disable this mac address..

alternativi

man, i think you dont know the problem yet, everything its Ok but when a computer is infected immidiatly his Mac Address clones in all other ip address, and you must just to restart Antena, and you will have internet just for 1 minute, and when i format his pc, it wok's well..can you tell me youre e...

alternativi

No i dont use Proxy-arp, i only have configured the router, and it wokrs so well, but the client is infected , and you know he make like this.. IP address Mac Address Interface 192.168.2.90 00:01:6C:89:1B XXXXXXX 192.168.2.91 00:01:6C:89:1B XXXXXXX but in reality the must have different Mac addresse...

alternativi

Hello everybody, i have a problem, when i go ip - apr, i see all ip addresses with the same Mac Address,and i must disable mac address, and ip address to get out of this problem, and until i format this pc i cannot enable ip because again he make clone macc addresses, can anybody tell me what is th...

Search found 79 matches